Switch to using PBKDF2 for the key generation for OBBs. Any previously
generated OBBs will stop being read correctly. A small pbkdf2gen program
is available to allow generation of appropriate keys with the salts.
Bug: 3059950
Change-Id: If4305c989fd692fd1150eb270dbf751e09c37295
Added a couple of micro-optimizations to avoid calling wake() unnecessarily
and reduce JNI overhead slightly.
Fixed a minor issue where we were not clearing the "next" field of Messages
returned by the MessageQueue so the Message would hold on to its successor
and potentially prevent the GC from collecting it if the message were leaked
somehow.
Change-Id: I488d29417ce0cdd7d0e447cda76ec978ef7f811c
AssetManager instances are created by zygote and passed to all its
children so that they don't have to individually open
frameworks-res.apk. This creates a problem for determining the current
file offset when using lseek() on those files, because you can't
guarantee the cross-process locking of a mutex. Luckily, Linux
implements pread() to get around this suckiness.
The problem is that only Linux implements this, so we have to keep the
old locking for use on host builds with aapt and friends. aapt doesn't
have this same problem of sharing file descriptors across forked
processes, so we can keep the local AutoMutex to protect accesses of
those files.
Change-Id: Ibe9f11499a53fe345f50fbaea438815ec0fd363e
There is apparently still a race upon reading the entry Local File
Header that can't be tracked down, so move the LFH check inside the
mutex-protected block so we can call lseek again to see where we are
when we log an error.
Also, close() can fail so use TEMP_FAILURE_RETRY on it so we don't
unwittingly leak file descriptors when Mean Mr. EINTR comes a-knocking.
Change-Id: I753abad0bd882fe28f7281c406fa76f64393ef4c
This feature is currently used to enable dragging the start and end
selection handles of a TextView at the same time. Could be used for
other things later.
Deleted some dead code in ArrowKeyMovementMethod and CursorControllers.
Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
Since we switched to seeking to the LFH to verify its existence instead
of a huge mmap of the file, we have to guarantee that another seek
doesn't happen before we finish our read on the LFH.
Change-Id: If8135d9cb6f2f5cc4db734eafa4f6b5f6269c62a
Also fix a Valgrind complaint by zeroing out the entire epoll event
struct since otherwise the data field union would be partly
uninitialized (but not in a harmful way).
Change-Id: I2091ce517e87fcad7c9caf90e2c5e4854a7ca465
The idea is that if you're writing code that wants fd/events/data on
return from pollOnce() / pollAll() you should really pass in all of those
arguments. When I changed the Looper API earlier, it was difficult
to ensure that all callers were passing the right parameters since they
were relying on default parameters to some degree so usage mistakes
would not have been caught by the compiler.
Change-Id: I1f2812894270aaf1515017ac1616b6b312d9b565
As part of this change, consolidated and cleaned up the Looper API so
that there are fewer distinctions between the NDK and non-NDK declarations
(no need for two callback types, etc.).
Removed the dependence on specific constants from sys/poll.h such as
POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for
the events that it supports. That should help make any future
under-the-hood implementation changes easier.
Fixed a couple of compiler warnings along the way.
Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
This change is essentially a rewrite of the main input dispatcher loop
with the target identification folded in. Since the input dispatcher now
has all of the window state, it can make better decisions about
when to ANR.
Added a .5 second deadline for processing app switch keys. This behavior
predates Gingerbread but had not previously been ported.
Fixed some timing inaccuracies in the ANR accounting that could cause
applications to ANR sooner than they should have.
Added a mechanism for tracking key and motion events that have been
dispatched to a window so that appropriate cancelation events can be
synthesized when recovering from ANR. This change helps to keep
applications in sync so they don't end up with stuck buttons upon
recovery from ANRs.
Added more comments to describe the tricky parts of PollLoop.
Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
The ALooper API now uses an explicit "identifier" for the integer
that is returned rather than implicitly using the fd. This allows
the APIs that had the fd to be a little more sane.
Change-Id: I8507f535ad484c0bdc4a1bd016d87bb09acd7ff0
* Add flags field in OBB footer to support overlays.
* Remove unused 'crypto' and 'filesystem' fields in obbtool (could
later be supported in the "flags" field of the OBB footer).
* Add notes to document OBB classes before shipping.
Change-Id: I386b43c32c5edef55210acb5d3322639c08010ba
This change involves adding a new method to IWindowManager,
monitorInput() that returns an InputChannel to receive a copy of all
input that is dispatched to applications. The caller must have
the READ_INPUT_STATE permission to make this request (similar to
other window manager methods such as getKeycodeState).
Change-Id: Icd14d810174a5b2928671ef16de73af88302aea0
Add "obbtool" host command for adding, removing, and querying Opaque
Binary Blob (OBB) information from a file.
Change-Id: Id2ac41e687ad2a500c362616d6738a8ae7e8f5c3
The LHS was ignored when using:
String8 + String8
String8 + (const char*)
Add unit tests for above.
Bug: 2898473
Change-Id: Ic8fe7be668b665c36aaaa3fc3c3ffdfff0fbba25
Compressed assets larger than one megabyte are now decompressed on demand
rather than being decompressed in their entirety and held in memory. Reading
the data in order is relatively efficient, as is seeking forward in the stream.
Seeking backwards is supported, but requires reprocessing the compressed data
from the beginning, so is very inefficient.
In addition, the size limit on compressed assets has been eliminated.
Change-Id: I6e68247957e6c53e7e8ba70d12764695f1723bad
Add dumpsys integration for the native input dispatcher.
Add some InputDevice API stubs.
Add an appendFormat helper method to String8 for printf style
string formatting mainly for debugging purposes.
Use generic ArrayList<WindowState> everywhere in WindowManagerService
to eliminate unnecessary casts all over.
Change-Id: I9d1e3bd90eb7222d10620200477f11b7bfd25e44
This factors out the boiler-plate code from the sample
app to a common glue code that can be used for everyone
writing this style of app: a dedicated app thread that
takes care of waiting for events and processing them.
As part of doing this, ALooper has a new facility to allow
registration of fds that cause ALooper_pollOnce() to return
the fd that has data, allowing the app to drive the loop
without callbacks. Hopefully this makes some people feel better. :)
Also do some other cleanup of the ALooper API, plus some
actual documentation.
Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
This allows us to avoid exposing the file descriptor of
the event queue; instead, you attach an event queue to
a looper. This will also should allow native apps to be
written without the need for a separate thread, by attaching
the event queue to the main thread's looper and scheduling
their own messages there.
Change-Id: I38489282635895ae2cbfacb88599c1b1cad9b239
when assigning a smart pointer to another one, we need to make
sure to read all the data we need from the right-hand-side
reference (the assignee) before we decRef the assigned.
This bug would cause linked-list of smart-pointers to fail
miserably.
Change-Id: Ibb554c15fddf909f7737c632b7c80322e80ea93f
Added more tests.
Fixed a regression in Vector.
Fixed bugs in pointer tracking.
Fixed a starvation issue in PollLoop when setting or removing callbacks.
Fixed a couple of policy nits.
Modified the internal representation of MotionEvent to be more
efficient and more consistent.
Added code to skip/cancel virtual key processing when there are multiple
pointers down. This helps to better disambiguate virtual key presses
from stray touches (such as cheek presses).
Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
The old dispatch mechanism has been left in place and continues to
be used by default for now. To enable native input dispatch,
edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy.
Includes part of the new input event NDK API. Some details TBD.
To wire up input dispatch, as the ViewRoot adds a window to the
window session it receives an InputChannel object as an output
argument. The InputChannel encapsulates the file descriptors for a
shared memory region and two pipe end-points. The ViewRoot then
provides the InputChannel to the InputQueue. Behind the
scenes, InputQueue simply attaches handlers to the native PollLoop object
that underlies the MessageQueue. This way MessageQueue doesn't need
to know anything about input dispatch per-se, it just exposes (in native
code) a PollLoop that other components can use to monitor file descriptor
state changes.
There can be zero or more targets for any given input event. Each
input target is specified by its input channel and some parameters
including flags, an X/Y coordinate offset, and the dispatch timeout.
An input target can request either synchronous dispatch (for foreground apps)
or asynchronous dispatch (fire-and-forget for wallpapers and "outside"
targets). Currently, finding the appropriate input targets for an event
requires a call back into the WindowManagerServer from native code.
In the future this will be refactored to avoid most of these callbacks
except as required to handle pending focus transitions.
End-to-end event dispatch mostly works!
To do: event injection, rate limiting, ANRs, testing, optimization, etc.
Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
Change the way zip archives are handled. This is necessary to deal with
very large (~1GB) APK files, for which our current approach of mapping
the entire file falls over.
We now do the classic scavenger hunt for the End Of Central Directory
magic on a buffer of data read from the file, instead of a memory-mapped
section. We use what we find to create a map that covers the Central
Directory only.
If the caller is interested in unpacking the file contents, we have to
do an additional file read to discover the size of the Local File Header
section so we can skip past it.
This is based on Change I745fb15abb in the dalvik tree. Both
implementations share a common ancestry, but the cost of unifying them
outweighs the benefits of wrapping C calls.
Change-Id: Iddacb50fe913917c2845708a530872d65fdbe620
Not complete, only for experimentation at this point.
This includes a reworking of how screen size configurations are matched,
so that if you are on a larger screen we can select configurations for
smaller screens if there aren't any exactly matching the current screen.
The screen size at which we switch to xlarge has been arbitrarily
chosen; the compatibility behavior has not yet been defined.
Change-Id: I1a33b3818eeb51a68fb72397568c39ab040a07f5
Condition must be initialized with SHARED for the old behavior, where
they can be used accross processes.
Updated the two places android that require SHARED conditions.
PRIVATE conditions (and mutexes) use more efficient syscalls.
Change-Id: I9a281a4b88206e92ac559c66554e886b9c62db3a
This loosens our restriction on many manifest attributes requiring
literal string values, to allow various ones to use values from
resources. This is only allowed if the resource value does not change
from configuration changes, and the restriction is still in place
for attributes that are core to security (requesting permissions) or
market operation (used libraries and features etc).
Change-Id: I4da02f6a5196cb6a7dbcff9ac25403904c42c2c8
Extract all UI behavior from dock observer and ACTION_DOCK_EVENT.
Also introduce a desk type to go along with the car type all through
the resource system, since we now need to have corresponding high-level
broadcasts for desk dock mode. As part of that I also reworked some
of the logic for switching modes to all funnel through a single
update() call that looks all of the current state to decide what to
do next, and fixed various locking issues.
In addition I found there were bugs in the configuration change
handling causing us to only switch into the car mode config and
then never get out of it. Unfortunately now that we are actually
changing the configuration for each mode change, the transitions
between them are really crummy as we restart all kinds of
activities. :(
And related:
- The aapt tool now sets a resource configurations sdk level to match any configs
that have been set (for example if you specify density your sdk level will be
at least 4).
- New option to modify the targetPackage attribute of instrumentation.
- Clean up of aapt options help.
- Fix of UI type values to leave 0 for "unspecified".
- Make the UI mode config APIs public.
StringBlock instances containing UTF-8 strings use a cache to convert
into UTF-16, but using that cache and then using a JNI call to NewString
causes the UTF-8 string as well as two copies of the UTF-16 string to
be held in memory. Getting the UTF-8 string directly from the StringPool
eliminates one copy of the UTF-16 string being held in memory.
This is part 1. Part 2 will include ResXMLParser optimizations.
Change-Id: Ibd4509a485db746d59cd4b9501f544877139276c
Add a Flattenable interface to libutils which can be used to flatten
an object into bytestream + filedescriptor stream.
Parcel is modified to handle Flattenable. And GraphicBuffer implements
Flattenable.
Except for the overlay classes libui is now independent of libbinder.
Unicode.cpp used a packed data table for character data that essentially
duplicated ICU's functionality.
Change-Id: Ia68fe4ac94e89dc68d9a3f45f33f6e648a5500b7
Remove some utility functions for discovering character data
that ICU probably took over a while ago.
Change-Id: I97abe4de2f51eb2bf48679941258bc501184c3dc
The device mode is now called ui mode. Furthermore is the order of
precedence for the resources now in such a way that the ui mode needs
to be specified after the orientation and before the density.
The ui mode can be set, like it is done for the locale, as follows:
IActivityManager am = ActivityManagerNative.getDefault();
Configuration config = am.getConfiguration();
config.uiMode = Configuration.UI_MODE_TYPE_CAR | Configuration.UI_MODE_NIGHT_ANY;
am.updateConfiguration(config);
To allow users to disable the car mode and set the night mode the IUiModeManager
interface is used.
The automatic night mode switching will be added in a separate change.
Allows "aapt dump --values resource" to print out whether a string in a
ResStringPool is in UTF-8 or UTF-16 encoding.
Change-Id: I6478884a70a3b46fee862dece6cb33454fc34843
This is a very simply implementation: upon receiving an IPC, if the handling
thread is at a background priority (the driver will have taken care of
propagating this from the calling thread), then stick it in to the background
scheduling group. Plus an API to turn this off for the process, which is
used by the system process.
This also pulls some of the code for managing scheduling classes out of
the Process JNI wrappers and in to some convenience methods in thread.h.
Allows the use of UTF-8 for packing resources instead of the
default of UTF-16 for Java. When strings are extracted from the
ResStringPool, they are converted to UTF-16 and the result is
cached for subsequent calls.
When using aapt to package, add in the "-8" switch to pack the
resources using UTF-8. This will result in the value, key, and
type strings as well as the compiled XML string values taking
significantly less space in the final application package in
most scenarios.
Change-Id: I129483f8b3d3b1c5869dced05cb525e494a6c83a
This implements support for devices whose hardware can hide
their navigation keys. It works much like the existing keyboardHidden
configuration, and for compatibility uses the same configuration
change bit.
Also add FLAG_TURN_ON_SCREEN for windows, which has the system
cause the screen to be turned on when the window is displayed.
Great fun when used with FLAG_SHOW_WHEN_LOCKED!
Change-Id: I0b867f19af85cfd8786a14cea194b34f7bdd9b7a
we could have several thread waiting on the condition and they all need to wake-up.
also added a debug "mTid" field in the class, which contains the tid of the thread (as opposed to pthread_t), this
is useful when debugging under gdb for instance.
