This change adds an implementation of a cache that stores key/value
pairs of unstructured binary blobs.
Change-Id: Idd01fdabedfa3aed6d359a6efb0592967af52651
* provide placeholder UI showing backup/restore start/stop/timeout
* don't kill the progress UI in mid stream
* tidy up the pax extended header data writing a little
Change-Id: Ife0cb78e3facb541d8327f1d5ca5fe77faa6cbca
Added the concept of pointer properties in a MotionEvent.
This is currently used to track the pointer tool type to enable
applications to distinguish finger touches from a stylus.
Button states are also reported to application as part of touch events.
There are no new actions for detecting changes in button states.
The application should instead query the button state from the
MotionEvent and take appropriate action as needed.
A good time to check the button state is on ACTION_DOWN.
As a side-effect, applications that do not support multiple buttons
will treat primary, secondary and tertiary buttons identically
for all touch events.
The back button on the mouse is mapped to KEYCODE_BACK
and the forward button is mapped to KEYCODE_FORWARD.
Added basic plumbing for the secondary mouse button to invoke
the context menu, particularly in lists.
Added clamp and split methods on MotionEvent to take care of
common filtering operations so we don't have them scattered
in multiple places across the framework.
Bug: 4260011
Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
'tar' supports only 100-character paths; 'ustar' supports only
155+100 character prefix + paths; neither supports files larger
than about 8 gigabytes. We now use the POSIX.1-2001 'pax'
extended tar format for those files in the backup stream that
are too large or have too-long paths for the 'ustar' format.
Change-Id: I2f256823091deaec9b1ccea685d2344753c6cb67
This change the binder protocol between SurfaceTextureClient
and SurfaceTexture. dequeueBuffer() now takes the requested
parameters for the buffer. SurfaceTexture decides if the
buffer needs to be reallocated and does the allocation
if needed. In that case it returns BUFFER_NEEDS_REALLOCATION
to tell SurfaceTextureClient that it needs to call
requestBuffer (which all parameters have been removed) to
acquire a pointer to the buffer.
dequeueBuffer and requestBuffer could be folded into a single
IPC call, but we chose to optimize the case where buffers are
not created and avoid some complexity in the marshalling code.
Change-Id: I097a7f6f40a3491e10f3f3742eab33999286c304
This is the basic infrastructure for pulling a full(*) backup of the
device's data over an adb(**) connection to the local device. The
basic process consists of these interacting pieces:
1. The framework's BackupManagerService, which coordinates the
collection of app data and routing to the destination.
2. A new framework-provided BackupAgent implementation called
FullBackupAgent, which is instantiated in the target applications'
processes in turn, and knows how to emit a datastream that contains
all of the app's saved data files.
3. A new shell-level program called "bu" that is used to bridge from
adb to the framework's Backup Manager.
4. adb itself, which now knows how to use 'bu' to kick off a backup
operation and pull the resulting data stream to the desktop host.
5. A system-provided application that verifies with the user that
an attempted backup/restore operation is in fact expected and to
be allowed.
The full agent implementation is not used during normal operation of
the delta-based app-customized remote backup process. Instead it's
used during user-confirmed *full* backup of applications and all their
data to a local destination, e.g. via the adb connection.
The output format is 'tar'. This makes it very easy for the end
user to examine the resulting dataset, e.g. for purpose of extracting
files for debug purposes; as well as making it easy to contemplate
adding things like a direct gzip stage to the data pipeline during
backup/restore. It also makes it convenient to construct and maintain
synthetic backup datasets for testing purposes.
Within the tar format, certain artificial conventions are used.
All files are stored within top-level directories according to
their semantic origin:
apps/pkgname/a/ : Application .apk file itself
apps/pkgname/obb/: The application's associated .obb containers
apps/pkgname/f/ : The subtree rooted at the getFilesDir() location
apps/pkgname/db/ : The subtree rooted at the getDatabasePath() parent
apps/pkgname/sp/ : The subtree rooted at the getSharedPrefsFile() parent
apps/pkgname/r/ : Files stored relative to the root of the app's file tree
apps/pkgname/c/ : Reserved for the app's getCacheDir() tree; not stored.
For each package, the first entry in the tar stream is a file called
"_manifest", nominally rooted at apps/pkgname. This file contains some
metadata about the package whose data is stored in the archive.
The contents of shared storage can optionally be included in the tar
stream. It is placed in the synthetic location:
shared/...
uid/gid are ignored; app uids are assigned at install time, and the
app's data is handled from within its own execution environment, so
will automatically have the app's correct uid.
Forward-locked .apk files are never backed up. System-partition
.apk files are not backed up unless they have been overridden by a
post-factory upgrade, in which case the current .apk *is* backed up --
i.e. the .apk that matches the on-disk data. The manifest preceding
each application's portion of the tar stream provides version numbers
and signature blocks for version checking, as well as an indication
of whether the restore logic should expect to install the .apk before
extracting the data.
System packages can designate their own full backup agents. This is
to manage things like the settings provider which (a) cannot be shut
down on the fly in order to do a clean snapshot of their file trees,
and (b) manage data that is not only irrelevant but actively hostile
to non-identical devices -- CDMA telephony settings would seriously
mess up a GSM device if emplaced there blind, for example.
When a full backup or restore is initiated from adb, the system will
present a confirmation UI that the user must explicitly respond to
within a short [~ 30 seconds] timeout. This is to avoid the
possibility of malicious desktop-side software secretly grabbing a copy
of all the user's data for nefarious purposes.
(*) The backup is not strictly a full mirror. In particular, the
settings database is not cloned; it is handled the same way that
it is in cloud backup/restore. This is because some settings
are actively destructive if cloned onto a different (or
especially a different-model) device: telephony settings and
AndroidID are good examples of this.
(**) On the framework side it doesn't care that it's adb; it just
sends the tar stream to a file descriptor. This can easily be
retargeted around whatever transport we might decide to use
in the future.
KNOWN ISSUES:
* the security UI is desperately ugly; no proper designs have yet
been done for it
* restore is not yet implemented
* shared storage backup is not yet implemented
* symlinks aren't yet handled, though some infrastructure for
dealing with them has been put in place.
Change-Id: Ia8347611e23b398af36ea22c36dff0a276b1ce91
First step of improving app screen size compatibility mode. When
running in compat mode, an application's windows are scaled up on
the screen rather than being small with 1:1 pixels.
Currently we scale the application to fill the entire screen, so
don't use an even pixel scaling. Though this may have some
negative impact on the appearance (it looks okay to me), it has a
big benefit of allowing us to now treat these apps as normal
full-screens apps and do the normal transition animations as you
move in and out and around in them.
This introduces fun stuff in the input system to take care of
modifying pointer coordinates to account for the app window
surface scaling. The input dispatcher is told about the scale
that is being applied to each window and, when there is one,
adjusts pointer events appropriately as they are being sent
to the transport.
Also modified is CompatibilityInfo, which has been greatly
simplified to not be so insane and incomprehendible. It is
now simple -- when constructed it determines if the given app
is compatible with the current screen size and density, and
that is that.
There are new APIs on ActivityManagerService to put applications
that we would traditionally consider compatible with larger screens
in compatibility mode. This is the start of a facility to have
a UI affordance for a user to switch apps in and out of
compatibility.
To test switching of modes, there is a new variation of the "am"
command to do this: am screen-compat [on|off] [package]
This mode switching has the fundamentals of restarting activities
when it is changed, though the state still needs to be persisted
and the overall mode switch cleaned up.
For the few small apps I have tested, things mostly seem to be
working well. I know of one problem with the text selection
handles being drawn at the wrong position because at some point
the window offset is being scaled incorrectly. There are
probably other similar issues around the interaction between
two windows because the different window coordinate spaces are
done in a hacky way instead of being formally integrated into
the window manager layout process.
Change-Id: Ie038e3746b448135117bd860859d74e360938557
query() does not modify the object's data, so it needs to be a const method
Change-Id: I67c40a3c865461e6f1cc2193fd2d74286ff6ac8f
Signed-off-by: Iliyan Malchev <malchev@google.com>
This change makes the libgui makefile recurse into the tests directory
so that the tests get built by a top-level make when
TARGET_BUILD_VARIANT=tests.
Change-Id: I6f623cc4b86dfeb00b9d21823316dbd9def23110
This change removes the check that disallowed the creation of an
EGLSurface that would send frames to a SurfaceTexture.
Change-Id: I44c6d5df503cc676a88144d72d39b414692ce4c9
Under Fedora 15 Beta, gcc 4.6.0 warns:
frameworks/base/libs/utils/RefBase.cpp: In member function
‘void android::RefBase::weakref_type::trackMe(bool, bool)’:
frameworks/base/libs/utils/RefBase.cpp:483:67: error: passing
‘const android::RefBase::weakref_impl’ as ‘this’ argument of
‘void android::RefBase::weakref_impl::trackMe(bool, bool)’
discards qualifiers [-fpermissive]
trackMe is not a const function, so don't use const in the static_cast
to a weakref_impl pointer.
Change-Id: I3c9ba73eb127985f5f54197ffecf2939c50f632c
Added a new PointerIcon API (hidden for now) for loading
pointer icons.
Fixed a starvation problem in the native Looper's sendMessage
implementation which caused new messages to be posted ahead
of old messages sent with sendMessageDelayed.
Redesigned the touch pad gestures to be defined in terms of
more fluid finger / spot movements. The objective is to reinforce
the natural mapping between fingers and spots which means there
must not be any discontinuities in spot motion relative to
the fingers.
Removed the SpotController stub and folded its responsibilities
into PointerController.
Change-Id: I5126b1e69d95252fda7f2a684c9287e239a57163
We now write battery history directly into a buffer, instead of
creating objects. This allows for more efficient storage; later
it can be even better because we can only write deltas.
The old code is still there temporarily for validation.
Change-Id: I9707d4d8ff30855be8ebdc93bc078911040d8e0b
This leak was intentional, it was there to deal with the fact that
some gralloc implementations don't track buffer handles with
file-descriptors so buffers needed to stay alive until there were
registered, which is not guaranteed by binder transactions.
In this new implementation, we use a small BBinder holding a
reference to the buffer, which with tuck into the parcel. This forces
the reference to stay alive until the parcel is destroyed, which
is guaranteed (by construction) to happen after the buffer is
registered.
this allows the public facing API to not expose the previous hack.
Change-Id: I1dd6cd83679a2b7457ad628169e2851acc027143
