libselinux selinux_android_restorecon API is changing to the more
general interface with flags and dropping the older variants.
Also get rid of the old, no longer used selinux_android_setfilecon API
and rename selinux_android_setfilecon2 to it as it is the only API in use.
Change-Id: I1e71ec398ccdc24cac4ec76f1b858d0f680f4925
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Support any number of overlay packages. Support any target package.
UPDATED PACKAGE MATCHING
------------------------
In Runtime resource overlay, iteration 1, only a single overlay package
was considered. Package matching was based on file paths:
/vendor/overlay/system/framework-res.apk corresponded to
/system/framework-res.apk. Introduce a more flexible matching scheme
where any package is an overlay package if its manifest includes
<overlay targetPackage="com.target.package"/>
For security reasons, an overlay package must fulfill certain criteria
to take effect: see below.
THE IDMAP TOOL AND IDMAP FILES
------------------------------
Idmap files are created by the 'idmap' binary; idmap files must be
present when loading packages. For the Android system, Zygote calls
'idmap' as part of the resource pre-loading. For application packages,
'idmap' is invoked via 'installd' during package installation (similar
to 'dexopt').
UPDATED FLOW
------------
The following is an outline of the start-up sequences for the Android
system and Android apps. Steps marked with '+' are introduced by this
commit.
Zygote initialization
Initial AssetManager object created
+ idmap --scan creates idmaps for overlays targeting 'android', \
stores list of overlays in /data/resource-cache/overlays.list
AssetManager caches framework-res.apk
+ AssetManager caches overlay packages listed in overlays.list
Android boot
New AssetManager's ResTable acquired
AssetManager re-uses cached framework-res.apk
+ AssetManager re-uses cached 'android' overlays (if any)
App boot
ActivityThread prepares AssetManager to load app.apk
+ ActivityThread prepares AssetManager to load app overlays (if any)
New AssetManager's ResTable acquired as per Android boot
SECURITY
--------
Overlay packages are required to be pre-loaded (in /vendor/overlay).
These packages are trusted by definition. A future iteration of runtime
resource overlay may add support for downloaded overlays, which would
likely require target and overlay signatures match for the overlay to
be trusted.
LOOKUP PRIORITY
---------------
During resource lookup, packages are sequentially queried to provide a
best match, given the constraints of the current configuration. If any
package provide a better match than what has been found so far, it
replaces the previous match. The target package is always queried last.
When loading a package with more than one overlay, the order in which
the overlays are added become significant if several packages overlay
the same resource.
Had downloaded overlays been supported, the install time could have been
used to determine the load order. Regardless, for pre-installed
overlays, the install time is randomly determined by the order in which
the Package Manager locates the packages during initial boot. To support
a well-defined order, pre-installed overlay packages are expected to
define an additional 'priority' attribute in their <overlay> tags:
<overlay targetPackage="com.target.package" priority="1234"/>
Pre-installed overlays are loaded in order of their priority attributes,
sorted in ascending order.
Assigning the same priority to several overlays targeting the same base
package leads to undefined behaviour. It is the responsibility of the
vendor to avoid this.
The following example shows the ResTable and PackageGroups after loading
an application and two overlays. The resource lookup framework will
query the packages in the order C, B, A.
+------+------+- -+------+------+
| 0x01 | | ... | | 0x7f |
+------+------+- -+------+------+
| |
"android" Target package A
|
Pre-installed overlay B (priority 1)
|
Pre-installed overlay C (priority 2)
Change-Id: If49c963149369b1957f7d2303b3dd27f669ed24e
Introduce a new tool 'idmap' to handle generation and verification of
idmap files. The tool is modelled on 'dexopt', and is intended to be
used similarly, notably by 'installd'.
See cmds/idmap/idmap.cpp for further documentation on 'idmap'.
Note: this commit is interdependent on a commit in project build/ to add
'idmap' to PRODUCT_PACKAGES.
Note: the changes to androidfw are only stubs. The actual implementation
will be provided in Runtime resource overlay, iteration 2.
Change-Id: I7131b74ece1e46c8a9c0a31d103e686aa07da2bb
Stop printing "invalid id " to stderr every time a process tries to
connect to the servicemanager.
Change-Id: Ib0e5a0375bfa2dec2c2f9cd668bd5dda46ed6588
This patch adds support for binder transactions on 64bit systems
without breaking the existing 32bit ABI. It has been tested on
the Android emulator and ARMv8 Model.
Most of the changes in this patch just follow the binder ABI.
Change-Id: I8c37b847ea65008d56554d34d4696fe3d22f7533
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
This patch corrects the types used for storing handles.
Change-Id: If9c10782345f1de9e12b4b3fd6be9e02e6b568cd
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
This patch fixes some of the ServiceManager issues. The following patches
of the series add fixes to the ABI.
Change-Id: Ib479234c8704e12592f1b149ddec67881bc50230
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
This patch extends the error handling. It also adds a check for a matching
binder version - kernel/userspace.
Change-Id: I43a262934b38c5711536aaa42754fed1ef04b39e
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
This patch fixes Android.mk and enables building bctest as an optional
module without any extra hacks.
Change-Id: Icaf8bf9452776db2ea4a2ba75f3abf05b4e2cdab
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
This patch switches ServiceManager to use the structures exported in the
kernel headers rather then redefining its own.
struct binder_txn is replaced with struct binder_transaction_data and struct
binder_object with struct flat_binder_object, both defined in the binder driver
header <linux/binder.h>.
Change-Id: I3b3e97918173ea35a289e184774ae06193192da3
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Add seinfo paramater to appropriate make directory
functions. This allows proper labeling for multi-user
scenarios.
Change-Id: Iaba7c40645bc7b6cc823d613da0c3782acf6ddd5
Signed-off-by: rpcraig <rpcraig@tycho.ncsc.mil>
Restarting installd upon policy reloads has reportedly caused
stability problems for some users. Stop restarting installd
and instead handle policy reloads within it.
Change-Id: I697a736d8e414cfc6cfa131ed7b97c7f7694d022
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
this is the first step of a series of improvements to
BufferQueue. A few things happen in this change:
- setSynchronousMode() goes away as well as the SynchronousModeAllowed flag
- BufferQueue now defaults to (what used to be) synchronous mode
- a new "controlled by app" flag is passed when creating consumers and producers
those flags are used to put the BufferQueue in a mode where it
will never block if both flags are set. This is achieved by:
- returning an error from dequeueBuffer() if it would block
- making sure a buffer is always available by replacing
the previous buffer with the new one in queueBuffer()
(note: this is similar to what asynchrnous mode used to be)
Note: in this change EGL's swap-interval 0 is broken; this will be
fixed in another change.
Change-Id: I691f9507d6e2e158287e3039f2a79a4d4434211d
This is a duplicate of the associated human-readable dumps
of these services, but much better for automated parsing.
Change-Id: I902b768b03aeac1472f03f96913f9b8ada5dba9c
