The code now takes into account the time when the event was generated.
So with a 60Hz throttling rate, it ensures that a motion event will not
be delayed due to throttling by any more than 1/60th of second past
the time it was generated.
Change-Id: Iaea1d4f76e79036b4a18873485230731c3cd63c3
system_server can potentially monitor uevent devices that are
of no use to it. For instance, an accelerometer implementation
as uevents. This would cause the process to be busy when
unnecessary. If a device cannot be classified, don't monitor it.
Change-Id: Ib2c93105e7d746d9c1a7414bea8bab3fb8c0b70a
On single-touch devices, pointer up/down is signalled by a BTN_TOUCH
key event. Previously we handled BTN_TOUCH immediately but some drivers
may produce the sequence BTN_TOUCH, ABS_X, ABS_Y, SYN_REPORT on pointer down
which caused us to emit a bad initial pointer down location.
Now we wait for SYN_REPORT before reporting the up or down.
On multi-touch devices, pointer up can be signalled by as little as
the sequence SYN_MT_REPORT, SYN_REPORT. This change ensures that we
handle this case.
Added support for reading ABS_MT_PRESSURE when available.
Corrected mapping of touchMajor/touchMinor on single touch devices.
Minor code cleanup.
Change-Id: Ic7ec4811241ed85a06e59b8a839ca05180d491d4
Sometimes the wrong fd was accessed when the device was addressed
by device id.
The earlier implementation assumed that two arrays were in sync
but one of them was compacted when devices were removed. Instead
of that dependency the device now keeps track of it's file descriptor.
Change-Id: Ib0f320603aafb07ded354bc3687de9759c9068f2
* Add flags field in OBB footer to support overlays.
* Remove unused 'crypto' and 'filesystem' fields in obbtool (could
later be supported in the "flags" field of the OBB footer).
* Add notes to document OBB classes before shipping.
Change-Id: I386b43c32c5edef55210acb5d3322639c08010ba
Previously, the input dispatcher assumed that the input channel's
receive pipe file descriptor was a sufficiently unique identifier for
looking up input channels in its various tables. However, it can happen
that an input channel is disposed and then a new input channel is
immediately created that reuses the same file descriptor. Ordinarily
this is not a problem, however there is a small opportunity for a race
to arise in InputQueue.
When InputQueue receives an input event from the dispatcher, it
generates a finishedToken that encodes the channel's receive pipe fd,
and a sequence number. The finishedToken is used by the ViewRoot
as a handle for the event so that it can tell the InputQueue when
the event has finished being processed.
Here is the race:
1. InputQueue receives an input event, assigns a new finishedToken.
2. ViewRoot begins processing the input event.
3. During processing, ViewRoot unregisters the InputChannel.
4. A new InputChannel is created and is registered with the Input Queue.
This InputChannel happens to have the same receive pipe fd as
the one previously registered.
5. ViewRoot tells the InputQueue that it has finished processing the
input event, passing along the original finishedToken.
6. InputQueue throws an exception because the finishedToken's receive
pipe fd is registered but the sequence number is incorrect so it
assumes that the client has called finish spuriously.
The fix is to include a unique connection id within the finishedToken so
that the InputQueue can accurately confirm that the token belongs to
the currently registered InputChannel rather than to an old one that
happened to have the same receive pipe fd. When it notices this, it
ignores the spurious finish.
I've also made a couple of other small changes to avoid similar races
elsewhere.
This patch set also includes a fix to synthesize a finished signal
when the input channel is unregistered on the client side to
help keep the server and client in sync.
Bug: 2834068
Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
Add "obbtool" host command for adding, removing, and querying Opaque
Binary Blob (OBB) information from a file.
Change-Id: Id2ac41e687ad2a500c362616d6738a8ae7e8f5c3
The LHS was ignored when using:
String8 + String8
String8 + (const char*)
Add unit tests for above.
Bug: 2898473
Change-Id: Ic8fe7be668b665c36aaaa3fc3c3ffdfff0fbba25
In the success case, the 65kB scanBuf was not freed!
Also, get rid of annoying complaints about ssize_t from printf in error
cases.
Change-Id: If154ac19bf47637f898b4ec8c8e27c9a073a7b81
Also fixed bug where old touch screen size could be reported by
getMotionRange if an orientation change occurred but the user has not
yet touched the screen.
Bug: 2877345
Change-Id: I7878f47458f310ed6ebe6a5d1b2c9bec2c598ab9
Exposed the new "min delay" sensor property through native and
java sensor apis. This allows the caller to know what is the
maximum rate at which a sensor can return events, or, if a sensor
works in "update" mode (events returned only when the value changes).
Also augmented SensorManager.regusterSensorEvent() so that it can
accept a value in microsecond in addition to the 4 constants already
defined.
Change-Id: If425e9979892666df8c989d7de3c362230fa19e0
On the assumption that the local min() function declaration is in
conflict with some 'min' #define floating around, rename the local
function to min_of().
Change-Id: I62aa27f213c6093cc78805de611cf4aa75f0eef2
Added a new asynchronous injection mode and made the existing
synchronization mechanism more robust.
Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
Compressed assets larger than one megabyte are now decompressed on demand
rather than being decompressed in their entirety and held in memory. Reading
the data in order is relatively efficient, as is seeking forward in the stream.
Seeking backwards is supported, but requires reprocessing the compressed data
from the beginning, so is very inefficient.
In addition, the size limit on compressed assets has been eliminated.
Change-Id: I6e68247957e6c53e7e8ba70d12764695f1723bad
Refactored the input reader so that each raw input protocol is handled
by a separate subclass of the new InputMapper type. This way, behaviors
pertaining to keyboard, trackballs, touchscreens, switches and other
devices are clearly distinguished for improved maintainability.
Added partial support for describing capabilities of input devices
(incomplete and untested for now, will be fleshed out in later commits).
Simplified EventHub interface somewhat since InputReader is taking over
more of the work.
Cleaned up some of the interactions between InputManager and
WindowManagerService related to reading input state.
Fixed swiping finger from screen edge into display area.
Added logging of device information to 'dumpsys window'.
Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
this situation happened when the last buffer needed to be resized
(or allocated, the first time). the assumption was that the buffer
was in use by SF itself as the current buffer (obviously, this
assumption made no sense when the buffer had never been allocated, btw).
the system would wait until some other buffer became the "front" buffer.
we fix this problem by entirely removing the requirement that the
buffer being resized cannot be the front buffer. instead, we just
allocate a new buffer and replace the front buffer by the new one.
the downside is that this uses more memory (an extra buffer) for a
brief amount of time while the old buffer is being reallocated and
before it has actually been replaced.
Change-Id: I022e4621209474ceb1c671b23deb4188eaaa7285
remove old sensor service and implement SensorManager
on top of the new (native) SensorManger API.
Change-Id: Iddb77d498755da3e11646473a44d651f12f40281
This change adds a process-global cache of previously deserialized Surface
objects so that if a Surface object wrapping the same ISurface gets received
again the same Surface can be used. This is important because the 'tail'
pointer in the SharedBufferClient is stored only on the client side, and needs
to be the same for all the Surface objects wrapping an ISurface instance. This
solves the problem by making there only be one Surface object wrapping an
ISurface per process.
Change-Id: I4bf0b8787885c56277622fca053022d2bb638902
Add dumpsys integration for the native input dispatcher.
Add some InputDevice API stubs.
Add an appendFormat helper method to String8 for printf style
string formatting mainly for debugging purposes.
Use generic ArrayList<WindowState> everywhere in WindowManagerService
to eliminate unnecessary casts all over.
Change-Id: I9d1e3bd90eb7222d10620200477f11b7bfd25e44
This significantly re-works the native key dispatching code to
allow events to be pre-dispatched to the current IME before
being processed by native code. It introduces one new public
API, which must be called after retrieving an event if the app
wishes for it to be pre-dispatched.
Currently the native code will only do pre-dispatching of
system keys, to avoid significant overhead for gaming input.
This should be improved to be smarted, filtering for only
keys that the IME is interested in. Unfortunately IMEs don't
currently provide this information. :p
Change-Id: Ic1c7aeec8b348164957f2cd88119eb5bd85c2a9f
Added several new coordinate values to MotionEvents to capture
touch major/minor area, tool major/minor area and orientation.
Renamed NDK input constants per convention.
Added InputDevice class in Java which will eventually provide
useful information about available input devices.
Added APIs for manufacturing new MotionEvent objects with multiple
pointers and all necessary coordinate data.
Fixed a bug in the input dispatcher where it could get stuck with
a pointer down forever.
Fixed a bug in the WindowManager where the input window list could
end up containing stale removed windows.
Fixed a bug in the WindowManager where the input channel was being
removed only after the final animation transition had taken place
which caused spurious WINDOW DIED log messages to be printed.
Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
Now, when Thread A has a strict mode policy in effect and does a
Binder call to Thread B (most likely in another process), the strict
mode policy is passed along, but with the GATHER penalty bit set which
overrides other policies and instead gathers all offending stack
traces to a threadlocal which are then written back in the Parcel's
reply header.
Change-Id: I7d4497032a0609b37b1a2a15855f5c929ba0584d
moved surfaceflinger, audioflinger, cameraservice
all native services should now reside in this location.
Change-Id: Iee42b83dd2a94c3bf5107ab0895fe2dfcd5337a8
in this commit:
- implemented the C stub
- implemented the binder interfaces involved
- implemented most of the C++ client side
missing:
- SensorManager cannot connect to the SensorServer yet
(because there is no SensorServer yet)
Change-Id: I75010cbeef31c98d6fa62fd5d388dcef87c2636b
