ADHOC/replicant-frameworks_native
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
95127e043b
replicant-frameworks_native/include/ui/InputReader.h

335 lines
12 KiB
C
Raw Normal View History

Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef _UI_INPUT_READER_H
#define _UI_INPUT_READER_H
#include <ui/EventHub.h>
#include <ui/Input.h>
Add initial gamepad support. Change-Id: I0439648f6eb5405f200e4223c915eb3a418b32b9
2010-06-30 23:10:35 +00:00
#include <ui/InputDevice.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#include <ui/InputDispatcher.h>
#include <utils/KeyedVector.h>
#include <utils/threads.h>
#include <utils/Timers.h>
#include <utils/RefBase.h>
#include <utils/String8.h>
#include <utils/BitSet.h>
#include <stddef.h>
#include <unistd.h>
namespace android {
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
/*
* Input reader policy interface.
*
* The input reader policy is used by the input reader to interact with the Window Manager
* and other system components.
*
* The actual implementation is partially supported by callbacks into the DVM
* via JNI. This interface is also mocked in the unit tests.
*/
class InputReaderPolicyInterface : public virtual RefBase {
protected:
InputReaderPolicyInterface() { }
virtual ~InputReaderPolicyInterface() { }
public:
/* Display orientations. */
enum {
ROTATION_0 = 0,
ROTATION_90 = 1,
ROTATION_180 = 2,
ROTATION_270 = 3
};
/* Actions returned by interceptXXX methods. */
enum {
// The input dispatcher should do nothing and discard the input unless other
// flags are set.
ACTION_NONE = 0,
// The input dispatcher should dispatch the input to the application.
ACTION_DISPATCH = 0x00000001,
// The input dispatcher should perform special filtering in preparation for
// a pending app switch.
ACTION_APP_SWITCH_COMING = 0x00000002,
// The input dispatcher should add POLICY_FLAG_WOKE_HERE to the policy flags it
// passes through the dispatch pipeline.
ACTION_WOKE_HERE = 0x00000004,
// The input dispatcher should add POLICY_FLAG_BRIGHT_HERE to the policy flags it
// passes through the dispatch pipeline.
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
ACTION_BRIGHT_HERE = 0x00000008,
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
};
/* Describes a virtual key. */
struct VirtualKeyDefinition {
int32_t scanCode;
// configured position data, specified in display coords
int32_t centerX;
int32_t centerY;
int32_t width;
int32_t height;
};
/* Gets information about the display with the specified id.
* Returns true if the display info is available, false otherwise.
*/
virtual bool getDisplayInfo(int32_t displayId,
int32_t* width, int32_t* height, int32_t* orientation) = 0;
More native input dispatch work. Removed old input dispatch code. Refactored the policy callbacks. Pushed a tiny bit of the power manager state down to native. Fixed long press on MENU. Made the virtual key detection and cancelation a bit more precise. Change-Id: I5d8c1062f7ea0ab3b54c6fadb058c4d5f5a9e02e
2010-07-02 22:37:36 +00:00
/* Provides feedback for a virtual key down.
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
*/
More native input dispatch work. Removed old input dispatch code. Refactored the policy callbacks. Pushed a tiny bit of the power manager state down to native. Fixed long press on MENU. Made the virtual key detection and cancelation a bit more precise. Change-Id: I5d8c1062f7ea0ab3b54c6fadb058c4d5f5a9e02e
2010-07-02 22:37:36 +00:00
virtual void virtualKeyDownFeedback() = 0;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
/* Intercepts a key event.
* The policy can use this method as an opportunity to perform power management functions
* and early event preprocessing.
*
* Returns a policy action constant such as ACTION_DISPATCH.
*/
virtual int32_t interceptKey(nsecs_t when, int32_t deviceId,
bool down, int32_t keyCode, int32_t scanCode, uint32_t policyFlags) = 0;
/* Intercepts a trackball event.
* The policy can use this method as an opportunity to perform power management functions
* and early event preprocessing.
*
* Returns a policy action constant such as ACTION_DISPATCH.
*/
virtual int32_t interceptTrackball(nsecs_t when, bool buttonChanged, bool buttonDown,
bool rolled) = 0;
/* Intercepts a touch event.
* The policy can use this method as an opportunity to perform power management functions
* and early event preprocessing.
*
* Returns a policy action constant such as ACTION_DISPATCH.
*/
virtual int32_t interceptTouch(nsecs_t when) = 0;
/* Intercepts a switch event.
* The policy can use this method as an opportunity to perform power management functions
* and early event preprocessing.
*
* Switches are not dispatched to applications so this method should
* usually return ACTION_NONE.
*/
virtual int32_t interceptSwitch(nsecs_t when, int32_t switchCode, int32_t switchValue) = 0;
/* Determines whether to turn on some hacks we have to improve the touch interaction with a
* certain device whose screen currently is not all that good.
*/
virtual bool filterTouchEvents() = 0;
/* Determines whether to turn on some hacks to improve touch interaction with another device
* where touch coordinate data can get corrupted.
*/
virtual bool filterJumpyTouchEvents() = 0;
/* Gets the configured virtual key definitions for an input device. */
virtual void getVirtualKeyDefinitions(const String8& deviceName,
Vector<VirtualKeyDefinition>& outVirtualKeyDefinitions) = 0;
/* Gets the excluded device names for the platform. */
virtual void getExcludedDeviceNames(Vector<String8>& outExcludedDeviceNames) = 0;
};
/* Processes raw input events and sends cooked event data to an input dispatcher. */
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
class InputReaderInterface : public virtual RefBase {
protected:
InputReaderInterface() { }
virtual ~InputReaderInterface() { }
public:
/* Runs a single iteration of the processing loop.
* Nominally reads and processes one incoming message from the EventHub.
*
* This method should be called on the input reader thread.
*/
virtual void loopOnce() = 0;
/* Gets the current virtual key. Returns false if not down.
*
* This method may be called on any thread (usually by the input manager).
*/
virtual bool getCurrentVirtualKey(int32_t* outKeyCode, int32_t* outScanCode) const = 0;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
/* Gets the current input device configuration.
*
* This method may be called on any thread (usually by the input manager).
*/
virtual void getCurrentInputConfiguration(InputConfiguration* outConfiguration) const = 0;
/*
* Query current input state.
* deviceId may be -1 to search for the device automatically, filtered by class.
* deviceClasses may be -1 to ignore device class while searching.
*/
virtual int32_t getCurrentScanCodeState(int32_t deviceId, int32_t deviceClasses,
int32_t scanCode) const = 0;
virtual int32_t getCurrentKeyCodeState(int32_t deviceId, int32_t deviceClasses,
int32_t keyCode) const = 0;
virtual int32_t getCurrentSwitchState(int32_t deviceId, int32_t deviceClasses,
int32_t sw) const = 0;
/* Determine whether physical keys exist for the given framework-domain key codes. */
virtual bool hasKeys(size_t numCodes, const int32_t* keyCodes, uint8_t* outFlags) const = 0;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/* The input reader reads raw event data from the event hub and processes it into input events
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
* that it sends to the input dispatcher. Some functions of the input reader, such as early
* event filtering in low power states, are controlled by a separate policy object.
*
* IMPORTANT INVARIANT:
* Because the policy can potentially block or cause re-entrance into the input reader,
* the input reader never calls into the policy while holding its internal locks.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
*/
class InputReader : public InputReaderInterface {
public:
InputReader(const sp<EventHubInterface>& eventHub,
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
const sp<InputReaderPolicyInterface>& policy,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
const sp<InputDispatcherInterface>& dispatcher);
virtual ~InputReader();
virtual void loopOnce();
virtual bool getCurrentVirtualKey(int32_t* outKeyCode, int32_t* outScanCode) const;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
virtual void getCurrentInputConfiguration(InputConfiguration* outConfiguration) const;
virtual int32_t getCurrentScanCodeState(int32_t deviceId, int32_t deviceClasses,
int32_t scanCode) const;
virtual int32_t getCurrentKeyCodeState(int32_t deviceId, int32_t deviceClasses,
int32_t keyCode) const;
virtual int32_t getCurrentSwitchState(int32_t deviceId, int32_t deviceClasses,
int32_t sw) const;
virtual bool hasKeys(size_t numCodes, const int32_t* keyCodes, uint8_t* outFlags) const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
private:
// Lock that must be acquired while manipulating state that may be concurrently accessed
// from other threads by input state query methods. It should be held for as short a
// time as possible.
//
// Exported state:
// - global virtual key code and scan code
// - device list and immutable properties of devices such as id, name, and class
// (but not other internal device state)
mutable Mutex mExportedStateLock;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
// current virtual key information (lock mExportedStateLock)
int32_t mExportedVirtualKeyCode;
int32_t mExportedVirtualScanCode;
// current input configuration (lock mExportedStateLock)
InputConfiguration mExportedInputConfiguration;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// combined key meta state
int32_t mGlobalMetaState;
sp<EventHubInterface> mEventHub;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
sp<InputReaderPolicyInterface> mPolicy;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
sp<InputDispatcherInterface> mDispatcher;
KeyedVector<int32_t, InputDevice*> mDevices;
// display properties needed to translate touch screen coordinates into display coordinates
int32_t mDisplayOrientation;
int32_t mDisplayWidth;
int32_t mDisplayHeight;
// low-level input event decoding
void process(const RawEvent* rawEvent);
void handleDeviceAdded(const RawEvent* rawEvent);
void handleDeviceRemoved(const RawEvent* rawEvent);
void handleSync(const RawEvent* rawEvent);
void handleKey(const RawEvent* rawEvent);
void handleRelativeMotion(const RawEvent* rawEvent);
void handleAbsoluteMotion(const RawEvent* rawEvent);
void handleSwitch(const RawEvent* rawEvent);
// input policy processing and dispatch
void onKey(nsecs_t when, InputDevice* device, bool down,
int32_t keyCode, int32_t scanCode, uint32_t policyFlags);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void onSwitch(nsecs_t when, InputDevice* device, int32_t switchCode, int32_t switchValue);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void onSingleTouchScreenStateChanged(nsecs_t when, InputDevice* device);
void onMultiTouchScreenStateChanged(nsecs_t when, InputDevice* device);
void onTouchScreenChanged(nsecs_t when, InputDevice* device, bool havePointerIds);
void onTrackballStateChanged(nsecs_t when, InputDevice* device);
void onConfigurationChanged(nsecs_t when);
bool applyStandardInputDispatchPolicyActions(nsecs_t when,
int32_t policyActions, uint32_t* policyFlags);
bool consumeVirtualKeyTouches(nsecs_t when, InputDevice* device, uint32_t policyFlags);
void dispatchVirtualKey(nsecs_t when, InputDevice* device, uint32_t policyFlags,
int32_t keyEventAction, int32_t keyEventFlags);
void dispatchTouches(nsecs_t when, InputDevice* device, uint32_t policyFlags);
void dispatchTouch(nsecs_t when, InputDevice* device, uint32_t policyFlags,
Fix individual pointer id up/down reporting. Fix a minor threading bug in InputManager dump. Change-Id: Ic2eecf7df5a8dc9f40561fcb03ebe58a2c073778
2010-07-16 22:01:56 +00:00
InputDevice::TouchData* touch, BitSet32 idBits, uint32_t changedId,
int32_t motionEventAction);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// display
void resetDisplayProperties();
bool refreshDisplayProperties();
// device management
InputDevice* getDevice(int32_t deviceId);
InputDevice* getNonIgnoredDevice(int32_t deviceId);
void addDevice(nsecs_t when, int32_t deviceId);
void removeDevice(nsecs_t when, InputDevice* device);
void configureDevice(InputDevice* device);
void configureDeviceForCurrentDisplaySize(InputDevice* device);
void configureVirtualKeys(InputDevice* device);
void configureAbsoluteAxisInfo(InputDevice* device, int axis, const char* name,
InputDevice::AbsoluteAxisInfo* out);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void configureExcludedDevices();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// global meta state management for all devices
void resetGlobalMetaState();
int32_t globalMetaState();
// virtual key management
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void updateExportedVirtualKeyState();
// input configuration management
void updateExportedInputConfiguration();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
/* Reads raw events from the event hub and processes them, endlessly. */
class InputReaderThread : public Thread {
public:
InputReaderThread(const sp<InputReaderInterface>& reader);
virtual ~InputReaderThread();
private:
sp<InputReaderInterface> mReader;
virtual bool threadLoop();
};
} // namespace android
#endif // _UI_INPUT_READER_H
Reference in New Issue Copy Permalink