ADHOC/replicant-frameworks_native
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
76107392f7
replicant-frameworks_native/include/ui/Input.h

482 lines
13 KiB
C
Raw Normal View History

Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef _UI_INPUT_H
#define _UI_INPUT_H
/**
* Native input event structures.
*/
#include <android/input.h>
#include <utils/Vector.h>
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
#include <utils/KeyedVector.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#include <utils/Timers.h>
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
#include <utils/RefBase.h>
#include <utils/String8.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Additional private constants not defined in ndk/ui/input.h.
*/
enum {
/*
* Private control to determine when an app is tracking a key sequence.
*/
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
AKEY_EVENT_FLAG_START_TRACKING = 0x40000000
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
/*
* Maximum number of pointers supported per motion event.
*/
#define MAX_POINTERS 10
First stab at attaching native event dispatching. Provides the basic infrastructure for a NativeActivity's native code to get an object representing its event stream that can be used to read input events. Still work to do, probably some API changes, and reasonable default key handling (so that for example back will still work). Change-Id: I6db891bc35dc9683181d7708eaed552b955a077e
2010-06-19 01:09:33 +00:00
/*
* Declare a concrete type for the NDK's input event forward declaration.
*/
IME events are now dispatched to native applications. And also: - APIs to show and hide the IME, and control its interaction with the app. - APIs to tell the app when its window resizes and needs to be redrawn. - API to tell the app the content rectangle of its window (to layout around the IME or status bar). There is still a problem with IME interaction -- we need a way for the app to deliver events to the IME before it handles them, so that for example the back key will close the IME instead of finishing the app. Change-Id: I37b75fc2ec533750ef36ca3aedd2f0cc0b5813cd
2010-07-14 00:48:30 +00:00
struct AInputEvent {
virtual ~AInputEvent() { }
};
First stab at attaching native event dispatching. Provides the basic infrastructure for a NativeActivity's native code to get an object representing its event stream that can be used to read input events. Still work to do, probably some API changes, and reasonable default key handling (so that for example back will still work). Change-Id: I6db891bc35dc9683181d7708eaed552b955a077e
2010-06-19 01:09:33 +00:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
* Declare a concrete type for the NDK's input device forward declaration.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
*/
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
struct AInputDevice {
virtual ~AInputDevice() { }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
namespace android {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Flags that flow alongside events in the input dispatch system to help with certain
* policy decisions such as waking from device sleep.
*/
enum {
/* These flags originate in RawEvents and are generally set in the key map. */
POLICY_FLAG_WAKE = 0x00000001,
POLICY_FLAG_WAKE_DROPPED = 0x00000002,
POLICY_FLAG_SHIFT = 0x00000004,
POLICY_FLAG_CAPS_LOCK = 0x00000008,
POLICY_FLAG_ALT = 0x00000010,
POLICY_FLAG_ALT_GR = 0x00000020,
POLICY_FLAG_MENU = 0x00000040,
POLICY_FLAG_LAUNCHER = 0x00000080,
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
POLICY_FLAG_RAW_MASK = 0x0000ffff,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
/* These flags are set by the input dispatcher. */
// Indicates that the input event was injected.
POLICY_FLAG_INJECTED = 0x01000000,
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
/* These flags are set by the input reader policy as it intercepts each event. */
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Indicates that the screen was off when the event was received and the event
// should wake the device.
POLICY_FLAG_WOKE_HERE = 0x10000000,
// Indicates that the screen was dim when the event was received and the event
// should brighten the device.
POLICY_FLAG_BRIGHT_HERE = 0x20000000,
};
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
/*
* Describes the basic configuration of input devices that are present.
*/
struct InputConfiguration {
enum {
TOUCHSCREEN_UNDEFINED = 0,
TOUCHSCREEN_NOTOUCH = 1,
TOUCHSCREEN_STYLUS = 2,
TOUCHSCREEN_FINGER = 3
};
enum {
KEYBOARD_UNDEFINED = 0,
KEYBOARD_NOKEYS = 1,
KEYBOARD_QWERTY = 2,
KEYBOARD_12KEY = 3
};
enum {
NAVIGATION_UNDEFINED = 0,
NAVIGATION_NONAV = 1,
NAVIGATION_DPAD = 2,
NAVIGATION_TRACKBALL = 3,
NAVIGATION_WHEEL = 4
};
int32_t touchScreen;
int32_t keyboard;
int32_t navigation;
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Pointer coordinate data.
*/
struct PointerCoords {
float x;
float y;
float pressure;
float size;
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
float touchMajor;
float touchMinor;
float toolMajor;
float toolMinor;
float orientation;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
/*
* Input events.
*/
Update native activity & event APIs to follow correct conventions. Change-Id: Ie64fb3a9c68bc9c117fa5621b75d1f609e304e0e
2010-06-28 22:27:30 +00:00
class InputEvent : public AInputEvent {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
public:
virtual ~InputEvent() { }
virtual int32_t getType() const = 0;
inline int32_t getDeviceId() const { return mDeviceId; }
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
inline int32_t getSource() const { return mSource; }
Implement default key handling for native code. The native code now maintains a list of all keys that may use default handling. If the app finishes one of these keys without handling it, the key will be passed back off to Java for default treatment. Change-Id: I6a842a0d728eeafa4de7142fae573f8c11099e18
2010-06-30 02:20:40 +00:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
protected:
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
void initialize(int32_t deviceId, int32_t source);
Implement native key pre-dispatching to IMEs. This significantly re-works the native key dispatching code to allow events to be pre-dispatched to the current IME before being processed by native code. It introduces one new public API, which must be called after retrieving an event if the app wishes for it to be pre-dispatched. Currently the native code will only do pre-dispatching of system keys, to avoid significant overhead for gaming input. This should be improved to be smarted, filtering for only keys that the IME is interested in. Unfortunately IMEs don't currently provide this information. :p Change-Id: Ic1c7aeec8b348164957f2cd88119eb5bd85c2a9f
2010-07-16 00:44:53 +00:00
void initialize(const InputEvent& from);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
private:
int32_t mDeviceId;
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
int32_t mSource;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
/*
* Key events.
*/
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
class KeyEvent : public InputEvent {
public:
virtual ~KeyEvent() { }
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
virtual int32_t getType() const { return AINPUT_EVENT_TYPE_KEY; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline int32_t getAction() const { return mAction; }
inline int32_t getFlags() const { return mFlags; }
inline int32_t getKeyCode() const { return mKeyCode; }
inline int32_t getScanCode() const { return mScanCode; }
inline int32_t getMetaState() const { return mMetaState; }
inline int32_t getRepeatCount() const { return mRepeatCount; }
inline nsecs_t getDownTime() const { return mDownTime; }
inline nsecs_t getEventTime() const { return mEventTime; }
Implement default key handling for native code. The native code now maintains a list of all keys that may use default handling. If the app finishes one of these keys without handling it, the key will be passed back off to Java for default treatment. Change-Id: I6a842a0d728eeafa4de7142fae573f8c11099e18
2010-06-30 02:20:40 +00:00
// Return true if this event may have a default action implementation.
static bool hasDefaultAction(int32_t keyCode);
bool hasDefaultAction() const;
// Return true if this event represents a system key.
static bool isSystemKey(int32_t keyCode);
bool isSystemKey() const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void initialize(
int32_t deviceId,
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
int32_t source,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t action,
int32_t flags,
int32_t keyCode,
int32_t scanCode,
int32_t metaState,
int32_t repeatCount,
nsecs_t downTime,
nsecs_t eventTime);
Implement native key pre-dispatching to IMEs. This significantly re-works the native key dispatching code to allow events to be pre-dispatched to the current IME before being processed by native code. It introduces one new public API, which must be called after retrieving an event if the app wishes for it to be pre-dispatched. Currently the native code will only do pre-dispatching of system keys, to avoid significant overhead for gaming input. This should be improved to be smarted, filtering for only keys that the IME is interested in. Unfortunately IMEs don't currently provide this information. :p Change-Id: Ic1c7aeec8b348164957f2cd88119eb5bd85c2a9f
2010-07-16 00:44:53 +00:00
void initialize(const KeyEvent& from);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
private:
int32_t mAction;
int32_t mFlags;
int32_t mKeyCode;
int32_t mScanCode;
int32_t mMetaState;
int32_t mRepeatCount;
nsecs_t mDownTime;
nsecs_t mEventTime;
};
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
/*
* Motion events.
*/
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
class MotionEvent : public InputEvent {
public:
virtual ~MotionEvent() { }
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
virtual int32_t getType() const { return AINPUT_EVENT_TYPE_MOTION; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline int32_t getAction() const { return mAction; }
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
inline int32_t getFlags() const { return mFlags; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline int32_t getEdgeFlags() const { return mEdgeFlags; }
inline int32_t getMetaState() const { return mMetaState; }
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getXOffset() const { return mXOffset; }
inline float getYOffset() const { return mYOffset; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline float getXPrecision() const { return mXPrecision; }
inline float getYPrecision() const { return mYPrecision; }
inline nsecs_t getDownTime() const { return mDownTime; }
inline size_t getPointerCount() const { return mPointerIds.size(); }
inline int32_t getPointerId(size_t pointerIndex) const { return mPointerIds[pointerIndex]; }
inline nsecs_t getEventTime() const { return mSampleEventTimes[getHistorySize()]; }
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getRawX(size_t pointerIndex) const {
return getCurrentPointerCoords(pointerIndex).x;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getRawY(size_t pointerIndex) const {
return getCurrentPointerCoords(pointerIndex).y;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline float getX(size_t pointerIndex) const {
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
return getRawX(pointerIndex) + mXOffset;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
inline float getY(size_t pointerIndex) const {
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
return getRawY(pointerIndex) + mYOffset;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
inline float getPressure(size_t pointerIndex) const {
return getCurrentPointerCoords(pointerIndex).pressure;
}
inline float getSize(size_t pointerIndex) const {
return getCurrentPointerCoords(pointerIndex).size;
}
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
inline float getTouchMajor(size_t pointerIndex) const {
return getCurrentPointerCoords(pointerIndex).touchMajor;
}
inline float getTouchMinor(size_t pointerIndex) const {
return getCurrentPointerCoords(pointerIndex).touchMinor;
}
inline float getToolMajor(size_t pointerIndex) const {
return getCurrentPointerCoords(pointerIndex).toolMajor;
}
inline float getToolMinor(size_t pointerIndex) const {
return getCurrentPointerCoords(pointerIndex).toolMinor;
}
inline float getOrientation(size_t pointerIndex) const {
return getCurrentPointerCoords(pointerIndex).orientation;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline size_t getHistorySize() const { return mSampleEventTimes.size() - 1; }
inline nsecs_t getHistoricalEventTime(size_t historicalIndex) const {
return mSampleEventTimes[historicalIndex];
}
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getHistoricalRawX(size_t pointerIndex, size_t historicalIndex) const {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return getHistoricalPointerCoords(pointerIndex, historicalIndex).x;
}
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getHistoricalRawY(size_t pointerIndex, size_t historicalIndex) const {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return getHistoricalPointerCoords(pointerIndex, historicalIndex).y;
}
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getHistoricalX(size_t pointerIndex, size_t historicalIndex) const {
return getHistoricalRawX(pointerIndex, historicalIndex) + mXOffset;
}
inline float getHistoricalY(size_t pointerIndex, size_t historicalIndex) const {
return getHistoricalRawY(pointerIndex, historicalIndex) + mYOffset;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline float getHistoricalPressure(size_t pointerIndex, size_t historicalIndex) const {
return getHistoricalPointerCoords(pointerIndex, historicalIndex).pressure;
}
inline float getHistoricalSize(size_t pointerIndex, size_t historicalIndex) const {
return getHistoricalPointerCoords(pointerIndex, historicalIndex).size;
}
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
inline float getHistoricalTouchMajor(size_t pointerIndex, size_t historicalIndex) const {
return getHistoricalPointerCoords(pointerIndex, historicalIndex).touchMajor;
}
inline float getHistoricalTouchMinor(size_t pointerIndex, size_t historicalIndex) const {
return getHistoricalPointerCoords(pointerIndex, historicalIndex).touchMinor;
}
inline float getHistoricalToolMajor(size_t pointerIndex, size_t historicalIndex) const {
return getHistoricalPointerCoords(pointerIndex, historicalIndex).toolMajor;
}
inline float getHistoricalToolMinor(size_t pointerIndex, size_t historicalIndex) const {
return getHistoricalPointerCoords(pointerIndex, historicalIndex).toolMinor;
}
inline float getHistoricalOrientation(size_t pointerIndex, size_t historicalIndex) const {
return getHistoricalPointerCoords(pointerIndex, historicalIndex).orientation;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void initialize(
int32_t deviceId,
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
int32_t source,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t action,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
int32_t flags,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t edgeFlags,
int32_t metaState,
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
float xOffset,
float yOffset,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
float xPrecision,
float yPrecision,
nsecs_t downTime,
nsecs_t eventTime,
size_t pointerCount,
const int32_t* pointerIds,
const PointerCoords* pointerCoords);
void addSample(
nsecs_t eventTime,
const PointerCoords* pointerCoords);
void offsetLocation(float xOffset, float yOffset);
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
// Low-level accessors.
inline const int32_t* getPointerIds() const { return mPointerIds.array(); }
inline const nsecs_t* getSampleEventTimes() const { return mSampleEventTimes.array(); }
inline const PointerCoords* getSamplePointerCoords() const {
return mSamplePointerCoords.array();
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
private:
int32_t mAction;
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
int32_t mFlags;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t mEdgeFlags;
int32_t mMetaState;
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
float mXOffset;
float mYOffset;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
float mXPrecision;
float mYPrecision;
nsecs_t mDownTime;
Vector<int32_t> mPointerIds;
Vector<nsecs_t> mSampleEventTimes;
Vector<PointerCoords> mSamplePointerCoords;
inline const PointerCoords& getCurrentPointerCoords(size_t pointerIndex) const {
return mSamplePointerCoords[getHistorySize() * getPointerCount() + pointerIndex];
}
inline const PointerCoords& getHistoricalPointerCoords(
size_t pointerIndex, size_t historicalIndex) const {
return mSamplePointerCoords[historicalIndex * getPointerCount() + pointerIndex];
}
};
/*
* Input event factory.
*/
class InputEventFactoryInterface {
protected:
virtual ~InputEventFactoryInterface() { }
public:
InputEventFactoryInterface() { }
virtual KeyEvent* createKeyEvent() = 0;
virtual MotionEvent* createMotionEvent() = 0;
};
/*
* A simple input event factory implementation that uses a single preallocated instance
* of each type of input event that are reused for each request.
*/
class PreallocatedInputEventFactory : public InputEventFactoryInterface {
public:
PreallocatedInputEventFactory() { }
virtual ~PreallocatedInputEventFactory() { }
virtual KeyEvent* createKeyEvent() { return & mKeyEvent; }
virtual MotionEvent* createMotionEvent() { return & mMotionEvent; }
private:
KeyEvent mKeyEvent;
MotionEvent mMotionEvent;
};
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
/*
* Describes the characteristics and capabilities of an input device.
*/
class InputDeviceInfo {
public:
InputDeviceInfo();
InputDeviceInfo(const InputDeviceInfo& other);
~InputDeviceInfo();
struct MotionRange {
float min;
float max;
float flat;
float fuzz;
};
void initialize(int32_t id, const String8& name);
inline int32_t getId() const { return mId; }
inline const String8 getName() const { return mName; }
inline uint32_t getSources() const { return mSources; }
const MotionRange* getMotionRange(int32_t rangeType) const;
void addSource(uint32_t source);
void addMotionRange(int32_t rangeType, float min, float max, float flat, float fuzz);
void addMotionRange(int32_t rangeType, const MotionRange& range);
inline void setKeyboardType(int32_t keyboardType) { mKeyboardType = keyboardType; }
inline int32_t getKeyboardType() const { return mKeyboardType; }
Input device calibration and capabilities. Finished the input device capability API. Added a mechanism for calibrating touch devices to obtain more accurate information about the touch contact area. Improved pointer location to show new coordinates and capabilities. Optimized pointer location display and formatting to avoid allocating large numbers of temporary objects. The GC churn was causing the application to stutter very badly when more than a couple of fingers were down). Added more diagnostics. Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
2010-08-30 10:02:23 +00:00
inline const KeyedVector<int32_t, MotionRange> getMotionRanges() const {
return mMotionRanges;
}
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
private:
int32_t mId;
String8 mName;
uint32_t mSources;
int32_t mKeyboardType;
KeyedVector<int32_t, MotionRange> mMotionRanges;
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
} // namespace android
#endif // _UI_INPUT_H
Reference in New Issue Copy Permalink