replicant-frameworks_native/include/ui/InputDispatcher.h

1052 lines
40 KiB
C
Raw Normal View History

Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef _UI_INPUT_DISPATCHER_H
#define _UI_INPUT_DISPATCHER_H
#include <ui/Input.h>
#include <ui/InputTransport.h>
#include <utils/KeyedVector.h>
#include <utils/Vector.h>
#include <utils/threads.h>
#include <utils/Timers.h>
#include <utils/RefBase.h>
#include <utils/String8.h>
#include <utils/Looper.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#include <utils/Pool.h>
#include <utils/BitSet.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#include <stddef.h>
#include <unistd.h>
#include <limits.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
namespace android {
/*
* Constants used to report the outcome of input event injection.
*/
enum {
/* (INTERNAL USE ONLY) Specifies that injection is pending and its outcome is unknown. */
INPUT_EVENT_INJECTION_PENDING = -1,
/* Injection succeeded. */
INPUT_EVENT_INJECTION_SUCCEEDED = 0,
/* Injection failed because the injector did not have permission to inject
* into the application with input focus. */
INPUT_EVENT_INJECTION_PERMISSION_DENIED = 1,
/* Injection failed because there were no available input targets. */
INPUT_EVENT_INJECTION_FAILED = 2,
/* Injection failed due to a timeout. */
INPUT_EVENT_INJECTION_TIMED_OUT = 3
};
/*
* Constants used to determine the input event injection synchronization mode.
*/
enum {
/* Injection is asynchronous and is assumed always to be successful. */
INPUT_EVENT_INJECTION_SYNC_NONE = 0,
/* Waits for previous events to be dispatched so that the input dispatcher can determine
* whether input event injection willbe permitted based on the current input focus.
* Does not wait for the input event to finish processing. */
INPUT_EVENT_INJECTION_SYNC_WAIT_FOR_RESULT = 1,
/* Waits for the input event to be completely processed. */
INPUT_EVENT_INJECTION_SYNC_WAIT_FOR_FINISHED = 2,
};
/*
* An input target specifies how an input event is to be dispatched to a particular window
* including the window's input channel, control flags, a timeout, and an X / Y offset to
* be added to input event coordinates to compensate for the absolute position of the
* window area.
*/
struct InputTarget {
enum {
/* This flag indicates that the event is being delivered to a foreground application. */
FLAG_FOREGROUND = 0x01,
/* This flag indicates that a MotionEvent with AMOTION_EVENT_ACTION_DOWN falls outside
* of the area of this target and so should instead be delivered as an
* AMOTION_EVENT_ACTION_OUTSIDE to this target. */
FLAG_OUTSIDE = 0x02,
/* This flag indicates that the target of a MotionEvent is partly or wholly
* obscured by another visible window above it. The motion event should be
* delivered with flag AMOTION_EVENT_FLAG_WINDOW_IS_OBSCURED. */
FLAG_WINDOW_IS_OBSCURED = 0x04,
/* This flag indicates that a motion event is being split across multiple windows. */
FLAG_SPLIT = 0x08,
};
// The input channel to be targeted.
sp<InputChannel> inputChannel;
// Flags for the input target.
int32_t flags;
// The x and y offset to add to a MotionEvent as it is delivered.
// (ignored for KeyEvents)
float xOffset, yOffset;
// The window type of the input target.
int32_t windowType;
// The subset of pointer ids to include in motion events dispatched to this input target
// if FLAG_SPLIT is set.
BitSet32 pointerIds;
};
/*
* An input window describes the bounds of a window that can receive input.
*/
struct InputWindow {
// Window flags from WindowManager.LayoutParams
enum {
FLAG_ALLOW_LOCK_WHILE_SCREEN_ON = 0x00000001,
FLAG_DIM_BEHIND = 0x00000002,
FLAG_BLUR_BEHIND = 0x00000004,
FLAG_NOT_FOCUSABLE = 0x00000008,
FLAG_NOT_TOUCHABLE = 0x00000010,
FLAG_NOT_TOUCH_MODAL = 0x00000020,
FLAG_TOUCHABLE_WHEN_WAKING = 0x00000040,
FLAG_KEEP_SCREEN_ON = 0x00000080,
FLAG_LAYOUT_IN_SCREEN = 0x00000100,
FLAG_LAYOUT_NO_LIMITS = 0x00000200,
FLAG_FULLSCREEN = 0x00000400,
FLAG_FORCE_NOT_FULLSCREEN = 0x00000800,
FLAG_DITHER = 0x00001000,
FLAG_SECURE = 0x00002000,
FLAG_SCALED = 0x00004000,
FLAG_IGNORE_CHEEK_PRESSES = 0x00008000,
FLAG_LAYOUT_INSET_DECOR = 0x00010000,
FLAG_ALT_FOCUSABLE_IM = 0x00020000,
FLAG_WATCH_OUTSIDE_TOUCH = 0x00040000,
FLAG_SHOW_WHEN_LOCKED = 0x00080000,
FLAG_SHOW_WALLPAPER = 0x00100000,
FLAG_TURN_SCREEN_ON = 0x00200000,
FLAG_DISMISS_KEYGUARD = 0x00400000,
FLAG_SPLIT_TOUCH = 0x00800000,
FLAG_KEEP_SURFACE_WHILE_ANIMATING = 0x10000000,
FLAG_COMPATIBLE_WINDOW = 0x20000000,
FLAG_SYSTEM_ERROR = 0x40000000,
};
// Window types from WindowManager.LayoutParams
enum {
FIRST_APPLICATION_WINDOW = 1,
TYPE_BASE_APPLICATION = 1,
TYPE_APPLICATION = 2,
TYPE_APPLICATION_STARTING = 3,
LAST_APPLICATION_WINDOW = 99,
FIRST_SUB_WINDOW = 1000,
TYPE_APPLICATION_PANEL = FIRST_SUB_WINDOW,
TYPE_APPLICATION_MEDIA = FIRST_SUB_WINDOW+1,
TYPE_APPLICATION_SUB_PANEL = FIRST_SUB_WINDOW+2,
TYPE_APPLICATION_ATTACHED_DIALOG = FIRST_SUB_WINDOW+3,
TYPE_APPLICATION_MEDIA_OVERLAY = FIRST_SUB_WINDOW+4,
LAST_SUB_WINDOW = 1999,
FIRST_SYSTEM_WINDOW = 2000,
TYPE_STATUS_BAR = FIRST_SYSTEM_WINDOW,
TYPE_SEARCH_BAR = FIRST_SYSTEM_WINDOW+1,
TYPE_PHONE = FIRST_SYSTEM_WINDOW+2,
TYPE_SYSTEM_ALERT = FIRST_SYSTEM_WINDOW+3,
TYPE_KEYGUARD = FIRST_SYSTEM_WINDOW+4,
TYPE_TOAST = FIRST_SYSTEM_WINDOW+5,
TYPE_SYSTEM_OVERLAY = FIRST_SYSTEM_WINDOW+6,
TYPE_PRIORITY_PHONE = FIRST_SYSTEM_WINDOW+7,
TYPE_SYSTEM_DIALOG = FIRST_SYSTEM_WINDOW+8,
TYPE_KEYGUARD_DIALOG = FIRST_SYSTEM_WINDOW+9,
TYPE_SYSTEM_ERROR = FIRST_SYSTEM_WINDOW+10,
TYPE_INPUT_METHOD = FIRST_SYSTEM_WINDOW+11,
TYPE_INPUT_METHOD_DIALOG= FIRST_SYSTEM_WINDOW+12,
TYPE_WALLPAPER = FIRST_SYSTEM_WINDOW+13,
TYPE_STATUS_BAR_PANEL = FIRST_SYSTEM_WINDOW+14,
LAST_SYSTEM_WINDOW = 2999,
};
sp<InputChannel> inputChannel;
String8 name;
int32_t layoutParamsFlags;
int32_t layoutParamsType;
nsecs_t dispatchingTimeout;
int32_t frameLeft;
int32_t frameTop;
int32_t frameRight;
int32_t frameBottom;
int32_t visibleFrameLeft;
int32_t visibleFrameTop;
int32_t visibleFrameRight;
int32_t visibleFrameBottom;
int32_t touchableAreaLeft;
int32_t touchableAreaTop;
int32_t touchableAreaRight;
int32_t touchableAreaBottom;
bool visible;
bool canReceiveKeys;
bool hasFocus;
bool hasWallpaper;
bool paused;
int32_t layer;
int32_t ownerPid;
int32_t ownerUid;
bool touchableAreaContainsPoint(int32_t x, int32_t y) const;
bool frameContainsPoint(int32_t x, int32_t y) const;
/* Returns true if the window is of a trusted type that is allowed to silently
* overlay other windows for the purpose of implementing the secure views feature.
* Trusted overlays, such as IME windows, can partly obscure other windows without causing
* motion events to be delivered to them with AMOTION_EVENT_FLAG_WINDOW_IS_OBSCURED.
*/
bool isTrustedOverlay() const;
};
/*
* A private handle type used by the input manager to track the window.
*/
class InputApplicationHandle : public RefBase {
protected:
InputApplicationHandle() { }
virtual ~InputApplicationHandle() { }
};
/*
* An input application describes properties of an application that can receive input.
*/
struct InputApplication {
String8 name;
nsecs_t dispatchingTimeout;
sp<InputApplicationHandle> handle;
};
/*
* Input dispatcher policy interface.
*
* The input reader policy is used by the input reader to interact with the Window Manager
* and other system components.
*
* The actual implementation is partially supported by callbacks into the DVM
* via JNI. This interface is also mocked in the unit tests.
*/
class InputDispatcherPolicyInterface : public virtual RefBase {
protected:
InputDispatcherPolicyInterface() { }
virtual ~InputDispatcherPolicyInterface() { }
public:
/* Notifies the system that a configuration change has occurred. */
virtual void notifyConfigurationChanged(nsecs_t when) = 0;
/* Notifies the system that an application is not responding.
* Returns a new timeout to continue waiting, or 0 to abort dispatch. */
virtual nsecs_t notifyANR(const sp<InputApplicationHandle>& inputApplicationHandle,
const sp<InputChannel>& inputChannel) = 0;
/* Notifies the system that an input channel is unrecoverably broken. */
virtual void notifyInputChannelBroken(const sp<InputChannel>& inputChannel) = 0;
/* Gets the key repeat initial timeout or -1 if automatic key repeating is disabled. */
virtual nsecs_t getKeyRepeatTimeout() = 0;
/* Gets the key repeat inter-key delay. */
virtual nsecs_t getKeyRepeatDelay() = 0;
/* Gets the maximum suggested event delivery rate per second.
* This value is used to throttle motion event movement actions on a per-device
* basis. It is not intended to be a hard limit.
*/
virtual int32_t getMaxEventsPerSecond() = 0;
/* Allows the policy a chance to intercept a key before dispatching. */
virtual bool interceptKeyBeforeDispatching(const sp<InputChannel>& inputChannel,
const KeyEvent* keyEvent, uint32_t policyFlags) = 0;
/* Poke user activity for an event dispatched to a window. */
virtual void pokeUserActivity(nsecs_t eventTime, int32_t eventType) = 0;
/* Checks whether a given application pid/uid has permission to inject input events
* into other applications.
*
* This method is special in that its implementation promises to be non-reentrant and
* is safe to call while holding other locks. (Most other methods make no such guarantees!)
*/
virtual bool checkInjectEventsPermissionNonReentrant(
int32_t injectorPid, int32_t injectorUid) = 0;
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/* Notifies the system about input events generated by the input reader.
* The dispatcher is expected to be mostly asynchronous. */
class InputDispatcherInterface : public virtual RefBase {
protected:
InputDispatcherInterface() { }
virtual ~InputDispatcherInterface() { }
public:
/* Dumps the state of the input dispatcher.
*
* This method may be called on any thread (usually by the input manager). */
virtual void dump(String8& dump) = 0;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/* Runs a single iteration of the dispatch loop.
* Nominally processes one queued event, a timeout, or a response from an input consumer.
*
* This method should only be called on the input dispatcher thread.
*/
virtual void dispatchOnce() = 0;
/* Notifies the dispatcher about new events.
*
* These methods should only be called on the input reader thread.
*/
virtual void notifyConfigurationChanged(nsecs_t eventTime) = 0;
virtual void notifyKey(nsecs_t eventTime, int32_t deviceId, int32_t source,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
uint32_t policyFlags, int32_t action, int32_t flags, int32_t keyCode,
int32_t scanCode, int32_t metaState, nsecs_t downTime) = 0;
virtual void notifyMotion(nsecs_t eventTime, int32_t deviceId, int32_t source,
uint32_t policyFlags, int32_t action, int32_t flags,
int32_t metaState, int32_t edgeFlags,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
uint32_t pointerCount, const int32_t* pointerIds, const PointerCoords* pointerCoords,
float xPrecision, float yPrecision, nsecs_t downTime) = 0;
/* Injects an input event and optionally waits for sync.
* The synchronization mode determines whether the method blocks while waiting for
* input injection to proceed.
* Returns one of the INPUT_EVENT_INJECTION_XXX constants.
*
* This method may be called on any thread (usually by the input manager).
*/
virtual int32_t injectInputEvent(const InputEvent* event,
int32_t injectorPid, int32_t injectorUid, int32_t syncMode, int32_t timeoutMillis) = 0;
/* Sets the list of input windows.
*
* This method may be called on any thread (usually by the input manager).
*/
virtual void setInputWindows(const Vector<InputWindow>& inputWindows) = 0;
/* Sets the focused application.
*
* This method may be called on any thread (usually by the input manager).
*/
virtual void setFocusedApplication(const InputApplication* inputApplication) = 0;
/* Sets the input dispatching mode.
*
* This method may be called on any thread (usually by the input manager).
*/
virtual void setInputDispatchMode(bool enabled, bool frozen) = 0;
/* Transfers touch focus from the window associated with one channel to the
* window associated with the other channel.
*
* Returns true on success. False if the window did not actually have touch focus.
*/
virtual bool transferTouchFocus(const sp<InputChannel>& fromChannel,
const sp<InputChannel>& toChannel) = 0;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/* Registers or unregister input channels that may be used as targets for input events.
* If monitor is true, the channel will receive a copy of all input events.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
*
* These methods may be called on any thread (usually by the input manager).
*/
virtual status_t registerInputChannel(const sp<InputChannel>& inputChannel, bool monitor) = 0;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
virtual status_t unregisterInputChannel(const sp<InputChannel>& inputChannel) = 0;
};
/* Dispatches events to input targets. Some functions of the input dispatcher, such as
* identifying input targets, are controlled by a separate policy object.
*
* IMPORTANT INVARIANT:
* Because the policy can potentially block or cause re-entrance into the input dispatcher,
* the input dispatcher never calls into the policy while holding its internal locks.
* The implementation is also carefully designed to recover from scenarios such as an
* input channel becoming unregistered while identifying input targets or processing timeouts.
*
* Methods marked 'Locked' must be called with the lock acquired.
*
* Methods marked 'LockedInterruptible' must be called with the lock acquired but
* may during the course of their execution release the lock, call into the policy, and
* then reacquire the lock. The caller is responsible for recovering gracefully.
*
* A 'LockedInterruptible' method may called a 'Locked' method, but NOT vice-versa.
*/
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
class InputDispatcher : public InputDispatcherInterface {
protected:
virtual ~InputDispatcher();
public:
explicit InputDispatcher(const sp<InputDispatcherPolicyInterface>& policy);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
virtual void dump(String8& dump);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
virtual void dispatchOnce();
virtual void notifyConfigurationChanged(nsecs_t eventTime);
virtual void notifyKey(nsecs_t eventTime, int32_t deviceId, int32_t source,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
uint32_t policyFlags, int32_t action, int32_t flags, int32_t keyCode,
int32_t scanCode, int32_t metaState, nsecs_t downTime);
virtual void notifyMotion(nsecs_t eventTime, int32_t deviceId, int32_t source,
uint32_t policyFlags, int32_t action, int32_t flags,
int32_t metaState, int32_t edgeFlags,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
uint32_t pointerCount, const int32_t* pointerIds, const PointerCoords* pointerCoords,
float xPrecision, float yPrecision, nsecs_t downTime);
virtual int32_t injectInputEvent(const InputEvent* event,
int32_t injectorPid, int32_t injectorUid, int32_t syncMode, int32_t timeoutMillis);
virtual void setInputWindows(const Vector<InputWindow>& inputWindows);
virtual void setFocusedApplication(const InputApplication* inputApplication);
virtual void setInputDispatchMode(bool enabled, bool frozen);
virtual bool transferTouchFocus(const sp<InputChannel>& fromChannel,
const sp<InputChannel>& toChannel);
virtual status_t registerInputChannel(const sp<InputChannel>& inputChannel, bool monitor);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
virtual status_t unregisterInputChannel(const sp<InputChannel>& inputChannel);
private:
template <typename T>
struct Link {
T* next;
T* prev;
};
struct InjectionState {
mutable int32_t refCount;
int32_t injectorPid;
int32_t injectorUid;
int32_t injectionResult; // initially INPUT_EVENT_INJECTION_PENDING
bool injectionIsAsync; // set to true if injection is not waiting for the result
int32_t pendingForegroundDispatches; // the number of foreground dispatches in progress
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
struct EventEntry : Link<EventEntry> {
enum {
TYPE_SENTINEL,
TYPE_CONFIGURATION_CHANGED,
TYPE_KEY,
TYPE_MOTION
};
mutable int32_t refCount;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t type;
nsecs_t eventTime;
InjectionState* injectionState;
bool dispatchInProgress; // initially false, set to true while dispatching
inline bool isInjected() { return injectionState != NULL; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
struct ConfigurationChangedEntry : EventEntry {
};
struct KeyEntry : EventEntry {
int32_t deviceId;
int32_t source;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
uint32_t policyFlags;
int32_t action;
int32_t flags;
int32_t keyCode;
int32_t scanCode;
int32_t metaState;
int32_t repeatCount;
nsecs_t downTime;
bool syntheticRepeat; // set to true for synthetic key repeats
enum InterceptKeyResult {
INTERCEPT_KEY_RESULT_UNKNOWN,
INTERCEPT_KEY_RESULT_SKIP,
INTERCEPT_KEY_RESULT_CONTINUE,
};
InterceptKeyResult interceptKeyResult; // set based on the interception result
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
struct MotionSample {
MotionSample* next;
nsecs_t eventTime;
PointerCoords pointerCoords[MAX_POINTERS];
};
struct MotionEntry : EventEntry {
int32_t deviceId;
int32_t source;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
uint32_t policyFlags;
int32_t action;
int32_t flags;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t metaState;
int32_t edgeFlags;
float xPrecision;
float yPrecision;
nsecs_t downTime;
uint32_t pointerCount;
int32_t pointerIds[MAX_POINTERS];
// Linked list of motion samples associated with this motion event.
MotionSample firstSample;
MotionSample* lastSample;
uint32_t countSamples() const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
// Tracks the progress of dispatching a particular event to a particular connection.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
struct DispatchEntry : Link<DispatchEntry> {
EventEntry* eventEntry; // the event to dispatch
int32_t targetFlags;
float xOffset;
float yOffset;
// True if dispatch has started.
bool inProgress;
// For motion events:
// Pointer to the first motion sample to dispatch in this cycle.
// Usually NULL to indicate that the list of motion samples begins at
// MotionEntry::firstSample. Otherwise, some samples were dispatched in a previous
// cycle and this pointer indicates the location of the first remainining sample
// to dispatch during the current cycle.
MotionSample* headMotionSample;
// Pointer to a motion sample to dispatch in the next cycle if the dispatcher was
// unable to send all motion samples during this cycle. On the next cycle,
// headMotionSample will be initialized to tailMotionSample and tailMotionSample
// will be set to NULL.
MotionSample* tailMotionSample;
inline bool hasForegroundTarget() const {
return targetFlags & InputTarget::FLAG_FOREGROUND;
}
inline bool isSplit() const {
return targetFlags & InputTarget::FLAG_SPLIT;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
// A command entry captures state and behavior for an action to be performed in the
// dispatch loop after the initial processing has taken place. It is essentially
// a kind of continuation used to postpone sensitive policy interactions to a point
// in the dispatch loop where it is safe to release the lock (generally after finishing
// the critical parts of the dispatch cycle).
//
// The special thing about commands is that they can voluntarily release and reacquire
// the dispatcher lock at will. Initially when the command starts running, the
// dispatcher lock is held. However, if the command needs to call into the policy to
// do some work, it can release the lock, do the work, then reacquire the lock again
// before returning.
//
// This mechanism is a bit clunky but it helps to preserve the invariant that the dispatch
// never calls into the policy while holding its lock.
//
// Commands are implicitly 'LockedInterruptible'.
struct CommandEntry;
typedef void (InputDispatcher::*Command)(CommandEntry* commandEntry);
class Connection;
struct CommandEntry : Link<CommandEntry> {
CommandEntry();
~CommandEntry();
Command command;
// parameters for the command (usage varies by command)
sp<Connection> connection;
nsecs_t eventTime;
KeyEntry* keyEntry;
sp<InputChannel> inputChannel;
sp<InputApplicationHandle> inputApplicationHandle;
int32_t userActivityEventType;
};
// Generic queue implementation.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
template <typename T>
struct Queue {
T headSentinel;
T tailSentinel;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline Queue() {
headSentinel.prev = NULL;
headSentinel.next = & tailSentinel;
tailSentinel.prev = & headSentinel;
tailSentinel.next = NULL;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
inline bool isEmpty() const {
return headSentinel.next == & tailSentinel;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
inline void enqueueAtTail(T* entry) {
T* last = tailSentinel.prev;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
last->next = entry;
entry->prev = last;
entry->next = & tailSentinel;
tailSentinel.prev = entry;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
inline void enqueueAtHead(T* entry) {
T* first = headSentinel.next;
headSentinel.next = entry;
entry->prev = & headSentinel;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
entry->next = first;
first->prev = entry;
}
inline void dequeue(T* entry) {
entry->prev->next = entry->next;
entry->next->prev = entry->prev;
}
inline T* dequeueAtHead() {
T* first = headSentinel.next;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
dequeue(first);
return first;
}
uint32_t count() const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
/* Allocates queue entries and performs reference counting as needed. */
class Allocator {
public:
Allocator();
InjectionState* obtainInjectionState(int32_t injectorPid, int32_t injectorUid);
ConfigurationChangedEntry* obtainConfigurationChangedEntry(nsecs_t eventTime);
KeyEntry* obtainKeyEntry(nsecs_t eventTime,
int32_t deviceId, int32_t source, uint32_t policyFlags, int32_t action,
int32_t flags, int32_t keyCode, int32_t scanCode, int32_t metaState,
int32_t repeatCount, nsecs_t downTime);
MotionEntry* obtainMotionEntry(nsecs_t eventTime,
int32_t deviceId, int32_t source, uint32_t policyFlags, int32_t action,
int32_t flags, int32_t metaState, int32_t edgeFlags,
float xPrecision, float yPrecision,
nsecs_t downTime, uint32_t pointerCount,
const int32_t* pointerIds, const PointerCoords* pointerCoords);
DispatchEntry* obtainDispatchEntry(EventEntry* eventEntry,
int32_t targetFlags, float xOffset, float yOffset);
CommandEntry* obtainCommandEntry(Command command);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void releaseInjectionState(InjectionState* injectionState);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void releaseEventEntry(EventEntry* entry);
void releaseConfigurationChangedEntry(ConfigurationChangedEntry* entry);
void releaseKeyEntry(KeyEntry* entry);
void releaseMotionEntry(MotionEntry* entry);
void releaseDispatchEntry(DispatchEntry* entry);
void releaseCommandEntry(CommandEntry* entry);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void recycleKeyEntry(KeyEntry* entry);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void appendMotionSample(MotionEntry* motionEntry,
nsecs_t eventTime, const PointerCoords* pointerCoords);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
private:
Pool<InjectionState> mInjectionStatePool;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Pool<ConfigurationChangedEntry> mConfigurationChangeEntryPool;
Pool<KeyEntry> mKeyEntryPool;
Pool<MotionEntry> mMotionEntryPool;
Pool<MotionSample> mMotionSamplePool;
Pool<DispatchEntry> mDispatchEntryPool;
Pool<CommandEntry> mCommandEntryPool;
void initializeEventEntry(EventEntry* entry, int32_t type, nsecs_t eventTime);
void releaseEventEntryInjectionState(EventEntry* entry);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
/* Tracks dispatched key and motion event state so that cancelation events can be
* synthesized when events are dropped. */
class InputState {
public:
// Specifies whether a given event will violate input state consistency.
enum Consistency {
// The event is consistent with the current input state.
CONSISTENT,
// The event is inconsistent with the current input state but applications
// will tolerate it. eg. Down followed by another down.
TOLERABLE,
// The event is inconsistent with the current input state and will probably
// cause applications to crash. eg. Up without prior down, move with
// unexpected number of pointers.
BROKEN
};
InputState();
~InputState();
// Returns true if there is no state to be canceled.
bool isNeutral() const;
// Returns true if the input state believes it is out of sync.
bool isOutOfSync() const;
// Sets the input state to be out of sync if it is not neutral.
void setOutOfSync();
// Resets the input state out of sync flag.
void resetOutOfSync();
// Records tracking information for an event that has just been published.
// Returns whether the event is consistent with the current input state.
Consistency trackEvent(const EventEntry* entry);
// Records tracking information for a key event that has just been published.
// Returns whether the event is consistent with the current input state.
Consistency trackKey(const KeyEntry* entry);
// Records tracking information for a motion event that has just been published.
// Returns whether the event is consistent with the current input state.
Consistency trackMotion(const MotionEntry* entry);
// Synthesizes cancelation events for the current state.
void synthesizeCancelationEvents(Allocator* allocator,
Vector<EventEntry*>& outEvents) const;
// Clears the current state.
void clear();
private:
bool mIsOutOfSync;
struct KeyMemento {
int32_t deviceId;
int32_t source;
int32_t keyCode;
int32_t scanCode;
nsecs_t downTime;
};
struct MotionMemento {
int32_t deviceId;
int32_t source;
float xPrecision;
float yPrecision;
nsecs_t downTime;
uint32_t pointerCount;
int32_t pointerIds[MAX_POINTERS];
PointerCoords pointerCoords[MAX_POINTERS];
void setPointers(const MotionEntry* entry);
};
Vector<KeyMemento> mKeyMementos;
Vector<MotionMemento> mMotionMementos;
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/* Manages the dispatch state associated with a single input channel. */
class Connection : public RefBase {
protected:
virtual ~Connection();
public:
enum Status {
// Everything is peachy.
STATUS_NORMAL,
// An unrecoverable communication error has occurred.
STATUS_BROKEN,
// The input channel has been unregistered.
STATUS_ZOMBIE
};
Status status;
sp<InputChannel> inputChannel;
InputPublisher inputPublisher;
InputState inputState;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Queue<DispatchEntry> outboundQueue;
nsecs_t lastEventTime; // the time when the event was originally captured
nsecs_t lastDispatchTime; // the time when the last event was dispatched
explicit Connection(const sp<InputChannel>& inputChannel);
inline const char* getInputChannelName() const { return inputChannel->getName().string(); }
const char* getStatusLabel() const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Finds a DispatchEntry in the outbound queue associated with the specified event.
// Returns NULL if not found.
DispatchEntry* findQueuedDispatchEntryForEvent(const EventEntry* eventEntry) const;
// Gets the time since the current event was originally obtained from the input driver.
inline double getEventLatencyMillis(nsecs_t currentTime) const {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return (currentTime - lastEventTime) / 1000000.0;
}
// Gets the time since the current event entered the outbound dispatch queue.
inline double getDispatchLatencyMillis(nsecs_t currentTime) const {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return (currentTime - lastDispatchTime) / 1000000.0;
}
status_t initialize();
};
sp<InputDispatcherPolicyInterface> mPolicy;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Mutex mLock;
Allocator mAllocator;
sp<Looper> mLooper;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EventEntry* mPendingEvent;
Queue<EventEntry> mInboundQueue;
Queue<CommandEntry> mCommandQueue;
Vector<EventEntry*> mTempCancelationEvents;
void dispatchOnceInnerLocked(nsecs_t keyRepeatTimeout, nsecs_t keyRepeatDelay,
nsecs_t* nextWakeupTime);
// Enqueues an inbound event. Returns true if mLooper->wake() should be called.
bool enqueueInboundEventLocked(EventEntry* entry);
// App switch latency optimization.
nsecs_t mAppSwitchDueTime;
static bool isAppSwitchKey(int32_t keyCode);
bool isAppSwitchPendingLocked();
bool detectPendingAppSwitchLocked(KeyEntry* inboundKeyEntry);
void resetPendingAppSwitchLocked(bool handled);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// All registered connections mapped by receive pipe file descriptor.
KeyedVector<int, sp<Connection> > mConnectionsByReceiveFd;
ssize_t getConnectionIndexLocked(const sp<InputChannel>& inputChannel);
Fix possible race conditions during channel unregistration. Previously, the input dispatcher assumed that the input channel's receive pipe file descriptor was a sufficiently unique identifier for looking up input channels in its various tables. However, it can happen that an input channel is disposed and then a new input channel is immediately created that reuses the same file descriptor. Ordinarily this is not a problem, however there is a small opportunity for a race to arise in InputQueue. When InputQueue receives an input event from the dispatcher, it generates a finishedToken that encodes the channel's receive pipe fd, and a sequence number. The finishedToken is used by the ViewRoot as a handle for the event so that it can tell the InputQueue when the event has finished being processed. Here is the race: 1. InputQueue receives an input event, assigns a new finishedToken. 2. ViewRoot begins processing the input event. 3. During processing, ViewRoot unregisters the InputChannel. 4. A new InputChannel is created and is registered with the Input Queue. This InputChannel happens to have the same receive pipe fd as the one previously registered. 5. ViewRoot tells the InputQueue that it has finished processing the input event, passing along the original finishedToken. 6. InputQueue throws an exception because the finishedToken's receive pipe fd is registered but the sequence number is incorrect so it assumes that the client has called finish spuriously. The fix is to include a unique connection id within the finishedToken so that the InputQueue can accurately confirm that the token belongs to the currently registered InputChannel rather than to an old one that happened to have the same receive pipe fd. When it notices this, it ignores the spurious finish. I've also made a couple of other small changes to avoid similar races elsewhere. This patch set also includes a fix to synthesize a finished signal when the input channel is unregistered on the client side to help keep the server and client in sync. Bug: 2834068 Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
2010-08-17 22:59:26 +00:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Active connections are connections that have a non-empty outbound queue.
// We don't use a ref-counted pointer here because we explicitly abort connections
// during unregistration which causes the connection's outbound queue to be cleared
// and the connection itself to be deactivated.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Vector<Connection*> mActiveConnections;
// Input channels that will receive a copy of all input events.
Vector<sp<InputChannel> > mMonitoringChannels;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Preallocated key event object used for policy inquiries.
KeyEvent mReusableKeyEvent;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Event injection and synchronization.
Condition mInjectionResultAvailableCondition;
EventEntry* createEntryFromInjectedInputEventLocked(const InputEvent* event);
void setInjectionResultLocked(EventEntry* entry, int32_t injectionResult);
Condition mInjectionSyncFinishedCondition;
void incrementPendingForegroundDispatchesLocked(EventEntry* entry);
void decrementPendingForegroundDispatchesLocked(EventEntry* entry);
// Throttling state.
struct ThrottleState {
nsecs_t minTimeBetweenEvents;
nsecs_t lastEventTime;
int32_t lastDeviceId;
uint32_t lastSource;
uint32_t originalSampleCount; // only collected during debugging
} mThrottleState;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Key repeat tracking.
struct KeyRepeatState {
KeyEntry* lastKeyEntry; // or null if no repeat
nsecs_t nextRepeatTime;
} mKeyRepeatState;
void resetKeyRepeatLocked();
KeyEntry* synthesizeKeyRepeatLocked(nsecs_t currentTime, nsecs_t keyRepeatTimeout);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Deferred command processing.
bool runCommandsLockedInterruptible();
CommandEntry* postCommandLocked(Command command);
// Inbound event processing.
void drainInboundQueueLocked();
void releasePendingEventLocked();
void releaseInboundEventLocked(EventEntry* entry);
bool isEventFromReliableSourceLocked(EventEntry* entry);
// Dispatch state.
bool mDispatchEnabled;
bool mDispatchFrozen;
Vector<InputWindow> mWindows;
const InputWindow* getWindowLocked(const sp<InputChannel>& inputChannel);
// Focus tracking for keys, trackball, etc.
const InputWindow* mFocusedWindow;
// Focus tracking for touch.
struct TouchedWindow {
const InputWindow* window;
int32_t targetFlags;
BitSet32 pointerIds;
sp<InputChannel> channel;
};
struct TouchState {
bool down;
bool split;
Vector<TouchedWindow> windows;
TouchState();
~TouchState();
void reset();
void copyFrom(const TouchState& other);
void addOrUpdateWindow(const InputWindow* window, int32_t targetFlags, BitSet32 pointerIds);
void removeOutsideTouchWindows();
const InputWindow* getFirstForegroundWindow();
};
TouchState mTouchState;
TouchState mTempTouchState;
// Focused application.
InputApplication* mFocusedApplication;
InputApplication mFocusedApplicationStorage; // preallocated storage for mFocusedApplication
void releaseFocusedApplicationLocked();
// Dispatch inbound events.
bool dispatchConfigurationChangedLocked(
nsecs_t currentTime, ConfigurationChangedEntry* entry);
bool dispatchKeyLocked(
nsecs_t currentTime, KeyEntry* entry, nsecs_t keyRepeatTimeout,
bool dropEvent, nsecs_t* nextWakeupTime);
bool dispatchMotionLocked(
nsecs_t currentTime, MotionEntry* entry,
bool dropEvent, nsecs_t* nextWakeupTime);
void dispatchEventToCurrentInputTargetsLocked(
nsecs_t currentTime, EventEntry* entry, bool resumeWithAppendedMotionSample);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void logOutboundKeyDetailsLocked(const char* prefix, const KeyEntry* entry);
void logOutboundMotionDetailsLocked(const char* prefix, const MotionEntry* entry);
// The input targets that were most recently identified for dispatch.
bool mCurrentInputTargetsValid; // false while targets are being recomputed
Vector<InputTarget> mCurrentInputTargets;
enum InputTargetWaitCause {
INPUT_TARGET_WAIT_CAUSE_NONE,
INPUT_TARGET_WAIT_CAUSE_SYSTEM_NOT_READY,
INPUT_TARGET_WAIT_CAUSE_APPLICATION_NOT_READY,
};
InputTargetWaitCause mInputTargetWaitCause;
nsecs_t mInputTargetWaitStartTime;
nsecs_t mInputTargetWaitTimeoutTime;
bool mInputTargetWaitTimeoutExpired;
// Finding targets for input events.
void resetTargetsLocked();
void commitTargetsLocked();
int32_t handleTargetsNotReadyLocked(nsecs_t currentTime, const EventEntry* entry,
const InputApplication* application, const InputWindow* window,
nsecs_t* nextWakeupTime);
void resumeAfterTargetsNotReadyTimeoutLocked(nsecs_t newTimeout,
const sp<InputChannel>& inputChannel);
nsecs_t getTimeSpentWaitingForApplicationLocked(nsecs_t currentTime);
void resetANRTimeoutsLocked();
int32_t findFocusedWindowTargetsLocked(nsecs_t currentTime, const EventEntry* entry,
nsecs_t* nextWakeupTime);
int32_t findTouchedWindowTargetsLocked(nsecs_t currentTime, const MotionEntry* entry,
nsecs_t* nextWakeupTime);
void addWindowTargetLocked(const InputWindow* window, int32_t targetFlags,
BitSet32 pointerIds);
void addMonitoringTargetsLocked();
bool shouldPokeUserActivityForCurrentInputTargetsLocked();
void pokeUserActivityLocked(nsecs_t eventTime, int32_t eventType);
bool checkInjectionPermission(const InputWindow* window, const InjectionState* injectionState);
bool isWindowObscuredAtPointLocked(const InputWindow* window, int32_t x, int32_t y) const;
bool isWindowFinishedWithPreviousInputLocked(const InputWindow* window);
String8 getApplicationWindowLabelLocked(const InputApplication* application,
const InputWindow* window);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Manage the dispatch cycle for a single connection.
// These methods are deliberately not Interruptible because doing all of the work
// with the mutex held makes it easier to ensure that connection invariants are maintained.
// If needed, the methods post commands to run later once the critical bits are done.
void prepareDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EventEntry* eventEntry, const InputTarget* inputTarget,
bool resumeWithAppendedMotionSample);
void startDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection);
void finishDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection);
void startNextDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection);
void abortDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
bool broken);
void drainOutboundQueueLocked(Connection* connection);
static int handleReceiveCallback(int receiveFd, int events, void* data);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Splitting motion events across windows.
MotionEntry* splitMotionEvent(const MotionEntry* originalMotionEntry, BitSet32 pointerIds);
// Dump state.
void dumpDispatchStateLocked(String8& dump);
void logDispatchStateLocked();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Add or remove a connection to the mActiveConnections vector.
void activateConnectionLocked(Connection* connection);
void deactivateConnectionLocked(Connection* connection);
// Interesting events that we might like to log or tell the framework about.
void onDispatchCycleStartedLocked(
nsecs_t currentTime, const sp<Connection>& connection);
void onDispatchCycleFinishedLocked(
nsecs_t currentTime, const sp<Connection>& connection);
void onDispatchCycleBrokenLocked(
nsecs_t currentTime, const sp<Connection>& connection);
void onANRLocked(
nsecs_t currentTime, const InputApplication* application, const InputWindow* window,
nsecs_t eventTime, nsecs_t waitStartTime);
// Outbound policy interactions.
void doNotifyConfigurationChangedInterruptible(CommandEntry* commandEntry);
void doNotifyInputChannelBrokenLockedInterruptible(CommandEntry* commandEntry);
void doNotifyANRLockedInterruptible(CommandEntry* commandEntry);
void doInterceptKeyBeforeDispatchingLockedInterruptible(CommandEntry* commandEntry);
void doPokeUserActivityLockedInterruptible(CommandEntry* commandEntry);
// Statistics gathering.
void updateDispatchStatisticsLocked(nsecs_t currentTime, const EventEntry* entry,
int32_t injectionResult, nsecs_t timeSpentWaitingForApplication);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
/* Enqueues and dispatches input events, endlessly. */
class InputDispatcherThread : public Thread {
public:
explicit InputDispatcherThread(const sp<InputDispatcherInterface>& dispatcher);
~InputDispatcherThread();
private:
virtual bool threadLoop();
sp<InputDispatcherInterface> mDispatcher;
};
} // namespace android
#endif // _UI_INPUT_DISPATCHER_H