replicant-vendor_replicant/charger/healthd_board_cm.cpp

420 lines
9.7 KiB
C++

/*
* Copyright (C) 2016 The CyanogenMod Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <errno.h>
#include <fcntl.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <time.h>
#include <unistd.h>
#include <cutils/android_reboot.h>
#include <cutils/klog.h>
#include <cutils/misc.h>
#include <cutils/uevent.h>
#include <cutils/properties.h>
#include <pthread.h>
#include <linux/android_alarm.h>
#include <sys/timerfd.h>
#include <linux/rtc.h>
#include "healthd.h"
#include "minui/minui.h"
#define LOGE(x...) do { KLOG_ERROR("charger", x); } while (0)
#define LOGW(x...) do { KLOG_WARNING("charger", x); } while (0)
#define LOGI(x...) do { KLOG_INFO("charger", x); } while (0)
#define LOGV(x...) do { KLOG_DEBUG("charger", x); } while (0)
struct frame {
int min_capacity;
GRSurface *surface;
};
struct animation {
struct frame *frames;
int cur_frame;
int num_frames;
};
static struct animation anim = {
.frames = NULL,
.cur_frame = 0,
.num_frames = 0,
};
static bool font_inited;
static int draw_surface_centered(GRSurface* surface)
{
int w, h, x, y;
w = gr_get_width(surface);
h = gr_get_height(surface);
x = (gr_fb_width() - w) / 2 ;
y = (gr_fb_height() - h) / 2 ;
gr_blit(surface, 0, 0, w, h, x, y);
return y + h;
}
#define STR_LEN 64
static void draw_capacity(int capacity)
{
char cap_str[STR_LEN];
snprintf(cap_str, (STR_LEN - 1), "%d%%", capacity);
struct frame *f = &anim.frames[0];
int font_x, font_y;
gr_font_size(&font_x, &font_y);
int w = gr_measure(cap_str);
int h = gr_get_height(f->surface);
int x = (gr_fb_width() - w) / 2;
int y = (gr_fb_height() + h) / 2;
gr_color(255, 255, 255, 255);
gr_text(x, y + font_y / 2, cap_str, 0);
}
#ifdef QCOM_HARDWARE
enum alarm_time_type {
ALARM_TIME,
RTC_TIME,
};
/*
* shouldn't be changed after
* reading from alarm register
*/
static time_t alm_secs;
static int alarm_get_time(enum alarm_time_type time_type,
time_t *secs)
{
struct tm tm;
unsigned int cmd;
int rc, fd = -1;
if (!secs)
return -1;
fd = open("/dev/rtc0", O_RDONLY);
if (fd < 0) {
LOGE("Can't open rtc devfs node\n");
return -1;
}
switch (time_type) {
case ALARM_TIME:
cmd = RTC_ALM_READ;
break;
case RTC_TIME:
cmd = RTC_RD_TIME;
break;
default:
LOGE("Invalid time type\n");
goto err;
}
rc = ioctl(fd, cmd, &tm);
if (rc < 0) {
LOGE("Unable to get time\n");
goto err;
}
*secs = mktime(&tm) + tm.tm_gmtoff;
if (*secs < 0) {
LOGE("Invalid seconds = %ld\n", *secs);
goto err;
}
close(fd);
return 0;
err:
close(fd);
return -1;
}
#define ERR_SECS 2
static int alarm_is_alm_expired()
{
int rc;
time_t rtc_secs;
rc = alarm_get_time(RTC_TIME, &rtc_secs);
if (rc < 0)
return 0;
return (alm_secs >= rtc_secs - ERR_SECS &&
alm_secs <= rtc_secs + ERR_SECS) ? 1 : 0;
}
static int timerfd_set_reboot_time_and_wait(time_t secs)
{
int fd;
int ret = -1;
fd = timerfd_create(CLOCK_REALTIME_ALARM, 0);
if (fd < 0) {
LOGE("Can't open timerfd alarm node\n");
goto err_return;
}
struct itimerspec spec;
memset(&spec, 0, sizeof(spec));
spec.it_value.tv_sec = secs;
if (timerfd_settime(fd, 0 /* relative */, &spec, NULL)) {
LOGE("Can't set timerfd alarm\n");
goto err_close;
}
uint64_t unused;
if (read(fd, &unused, sizeof(unused)) < 0) {
LOGE("Wait alarm error\n");
goto err_close;
}
ret = 0;
err_close:
close(fd);
err_return:
return ret;
}
static int alarm_set_reboot_time_and_wait(time_t secs)
{
int rc, fd;
struct timespec ts;
fd = open("/dev/alarm", O_RDWR);
if (fd < 0) {
LOGE("Can't open alarm devfs node, trying timerfd\n");
return timerfd_set_reboot_time_and_wait(secs);
}
/* get the elapsed realtime from boot time to now */
rc = ioctl(fd, ANDROID_ALARM_GET_TIME(
ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP), &ts);
if (rc < 0) {
LOGE("Unable to get elapsed realtime\n");
goto err;
}
/* calculate the elapsed time from boot time to reboot time */
ts.tv_sec += secs;
ts.tv_nsec = 0;
rc = ioctl(fd, ANDROID_ALARM_SET(
ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP), &ts);
if (rc < 0) {
LOGE("Unable to set reboot time to %ld\n", secs);
goto err;
}
do {
rc = ioctl(fd, ANDROID_ALARM_WAIT);
} while ((rc < 0 && errno == EINTR) || !alarm_is_alm_expired());
if (rc <= 0) {
LOGE("Unable to wait on alarm\n");
goto err;
}
close(fd);
return 0;
err:
if (fd >= 0)
close(fd);
return -1;
}
static void *alarm_thread(void *)
{
time_t rtc_secs, rb_secs;
int rc;
/*
* to support power off alarm, the time
* stored in alarm register at latest
* shutdown time should be some time
* earlier than the actual alarm time
* set by user
*/
rc = alarm_get_time(ALARM_TIME, &alm_secs);
LOGI("RTC Alarm %ld\n", alm_secs);
if (rc < 0 || !alm_secs)
goto err;
rc = alarm_get_time(RTC_TIME, &rtc_secs);
LOGI("RTC Clock %ld\n", rtc_secs);
if (rc < 0)
goto err;
/*
* calculate the reboot time after which
* the phone will reboot
*/
rb_secs = alm_secs - rtc_secs;
if (rb_secs <= 0)
goto err;
rc = alarm_set_reboot_time_and_wait(rb_secs);
if (rc < 0)
goto err;
LOGI("Exit from power off charging, reboot the phone!\n");
android_reboot(ANDROID_RB_RESTART, 0, 0);
err:
LOGE("Exit from alarm thread\n");
return NULL;
}
#endif
void healthd_board_init(struct healthd_config*)
{
pthread_t tid;
char value[PROP_VALUE_MAX];
int rc = 0, scale_count = 0, i;
GRSurface **scale_frames;
rc = res_create_multi_display_surface("charger/cm_battery_scale",
&scale_count, &scale_frames);
if (rc < 0) {
LOGE("%s: Unable to load battery scale image", __func__);
return;
}
anim.frames = new frame[scale_count];
anim.num_frames = scale_count;
for (i = 0; i < anim.num_frames; i++) {
anim.frames[i].surface = scale_frames[i];
anim.frames[i].min_capacity = 100/(scale_count-1) * i;
}
#ifdef QCOM_HARDWARE
property_get("ro.bootmode", value, "");
if (!strcmp("charger", value)) {
rc = pthread_create(&tid, NULL, alarm_thread, NULL);
if (rc < 0)
LOGE("Create alarm thread failed\n");
}
#endif
}
int healthd_board_battery_update(struct android::BatteryProperties*)
{
// return 0 to log periodic polled battery status to kernel log
return 1;
}
void healthd_board_mode_charger_draw_battery(
struct android::BatteryProperties *batt_prop)
{
int start_frame = 0;
int capacity = -1;
if (!font_inited) {
gr_set_font("log");
font_inited = true;
}
if (batt_prop && batt_prop->batteryLevel >= 0) {
capacity = batt_prop->batteryLevel;
}
if (anim.num_frames == 0 || capacity < 0) {
LOGE("%s: Unable to draw battery", __func__);
return;
}
// Find starting frame to display based on current capacity
for (start_frame = 1; start_frame < anim.num_frames; start_frame++) {
if (capacity < anim.frames[start_frame].min_capacity)
break;
}
// Always start from the level just below the current capacity
start_frame--;
if (anim.cur_frame < start_frame)
anim.cur_frame = start_frame;
draw_surface_centered(anim.frames[anim.cur_frame].surface);
draw_capacity(capacity);
// Move to next frame, with max possible frame at max_idx
anim.cur_frame = ((anim.cur_frame + 1) % anim.num_frames);
}
void healthd_board_mode_charger_battery_update(
struct android::BatteryProperties*)
{
}
#ifdef HEALTHD_BACKLIGHT_PATH
#ifndef HEALTHD_BACKLIGHT_LEVEL
#define HEALTHD_BACKLIGHT_LEVEL 100
#endif
void healthd_board_mode_charger_set_backlight(bool on)
{
int fd;
char buffer[10];
memset(buffer, '\0', sizeof(buffer));
fd = open(HEALTHD_BACKLIGHT_PATH, O_RDWR);
if (fd < 0) {
LOGE("Could not open backlight node : %s\n", strerror(errno));
return;
}
LOGV("Enabling backlight\n");
snprintf(buffer, sizeof(buffer), "%d\n", on ? HEALTHD_BACKLIGHT_LEVEL : 0);
if (write(fd, buffer, strlen(buffer)) < 0) {
LOGE("Could not write to backlight : %s\n", strerror(errno));
}
close(fd);
#ifdef HEALTHD_SECONDARY_BACKLIGHT_PATH
fd = open(HEALTHD_SECONDARY_BACKLIGHT_PATH, O_RDWR);
if (fd < 0) {
LOGE("Could not open second backlight node : %s\n", strerror(errno));
return;
}
LOGV("Enabling secondary backlight\n");
if (write(fd, buffer, strlen(buffer)) < 0) {
LOGE("Could not write to second backlight : %s\n", strerror(errno));
return;
}
close(fd);
#endif
}
#else
void healthd_board_mode_charger_set_backlight(bool)
{
}
#endif
void healthd_board_mode_charger_init(void)
{
}