This simply adds checks for selinux labels for
files under /data/misc/wifi which were not labeled
correctly for some devices
Change-Id: Iaacf6db792aaea1485502b424d639a1212c5841b
* combine apns
* leave cdma/gsm files intact but empty until the calls
* are removed from devices cm.mk
Change-Id: I0686ef4ee1fe9b34ac9beaaa2bd43555234f4f6d
These changes fix the error below found in a logcat and clean up some other issues in the file.
"E CM PowerHAL: Error opening /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate: Permission denied"
PS2: tweaked permissions & removed dupilcated entries
Change-Id: I9b1bbe66c36ba0d8de13b8cb9351d2952851c250
Rename of authenticatiotype to authtype wish i accidentaly
wrote wrong by mistake, now it is right and set authentication type to "PAP"
correctly.
Change-Id: If4a235682c3330db7c87531039ffd92ceb6098e4
Sprint CDMA MMS APN was being incorrectly set as default and hipri,
causing LTE connectivity issues because it was prioritized over the
other APN entries for LTE and EHRPD.
Change-Id: I6ca4fd172e2ecc64ca7a2c3fbca5327be61e7b5c
- Add back and fix Sprint APN for 1x/HRPD. Corrects MMS settings and gives a
suitable APN for DcTracker to use for HRPD/EvDo.
- Remove All test SIM APNs. Since no one is running around with a test SIM and
its useless to have a bunch of APNs sharing the same MCC MNC pair.
Change-Id: I1ccbed9b3cdd456e97d205d70bf283785122de8c
This reverts commit ea14a88a2a.
Using the Package Manager prevents any danling wakelock from
killed service/receiver.
Change-Id: Ie3162ca4b18a7bc9c55613af39e88ea980407e5f
In some areas, the new StraightTalk ATT apn settings do
not work, requiring the user to re-add the apn settings
on their own, a feat made more difficult by the fact
that StraightTalk only lists the new apn info on their
website
Change-Id: Id02876d4aa461a3ad8e7211ef45f468b6e181036
Add in Beeline UZ APN, and remove MTS UZ as they are no longer
operating in the region.
Per https://jira.cyanogenmod.org/browse/CYAN-2220
Change-Id: I3cf38a6736d28af8aa568f630dc8bb9344259a82
Per https://jira.cyanogenmod.org/browse/CYAN-1750 , correct
mnc listing for Claro PR LTE apn is "110" instead of "11".
Patchset #2: Modify non-LTE APNs as well; change commmit title
Patchset #3: Modify commit title to clarify Claro PR adjustments only
Change-Id: Ic18810492a282fc74b5472139404e2db48edd83d
Everything Everywhere (EE) replace Orange UK and T-Mobile UK.
Adapted for CM conf from Guillaume Châtelet's commit:
d9bd5e7d4f
PS1: initial commit
PS2: rebase
Change-Id: Ie1ff90bdffd1cce8c5697624b4c83a06a6729dc3
Since not all recoveries out there will support the OTA packages'
own labeling, check at boot if the system needs labels (and
apply them)
Change-Id: I58767977b90a78a12efe7bd9d713654eadf47e7a
sysinit depends on having the filesystems mounted, and userdata
in particular depends on having /data present. Move its startup
to post-fs-data
Change-Id: Iafcc926a3aa310c1afe501d272df5811da500d86
This commit updates the Personal Argentina APN to the new
datos.personal.com address and adds another set of entries for when
mnc is 341
Change-Id: Ibe17ba00c5ffe3730fce107f0a471ac9c408b636
The error that this patch was guarding against is no longer reproducible
on d2spr.
This reverts commit 285d4c2a4d.
Change-Id: I373ad22a021de74df4f8907dc79717719708431d
MTNL uses 68 and 69 MNC respectively in Delhi and mumbai
forward port of this change
http://review.cyanogenmod.org/#/c/27022/
Signed-off-by: Arnav Gupta <championswimmer@gmail.com>
This is taken from the OTA update for the Note II.
All APNs are currently resolving to the same 2 addresses from my T-Mobile phone.
The T-Mobile support website lists fast.tmobile.com (no hyphen).
I am attempting to mirror the stock OTA from T-Mobile.
Change-Id: I863b517be7dec19620b79fc876a88ba65e4dacba
Using proxy.mvno.tracfone.com should also future proof it if they change the
IP again. proxy.mvno.tracfone.com resolves to (66.209.11.32)
Change-Id: I8cb5b3ce473bef1369ec4ee313759258fc1172d3
* These "phone" provisioned SIM's don't work with the "pta" APN
* LTE and MMS do work properly with "phone" APN
Change-Id: I782f9ee5c642c5354ab35489a9c899a52c0d5107
Reportedly Free Mobile users must edit their APN and remove whitespaces to make it work. I searched and fixed the other ", " occurrences too while I was at it.
Change-Id: Ib948dff8329653c42c967c4dae5a6e97086df127
This is to address hang-ups in eHRPD-LTE hand-offs as witnessed on d2spr.
Log of problem:
[GsmDC-6] Connecting to carrier: 'APN2 EHRPD internet' APN: 'n.ispsn' proxy: 'null' port: 'null'
[0319]> SETUP_DATA_CALL 15 0 n.ispsn null null 0 IPV4V6
....
qmi_ril(0/281): [event] qcril_data_event_hdlr: Dual-IP Partial Retry: Failure
qcril_data_event_hdlr: Dual-IP Partial Retry: Sending setup data call failure code
On stock rom:
[GsmDC-50] Connecting to carrier: 'APN2 EHRPD internet' APN: 'n.ispsn' proxy: '' port: '
[GsmDC-50] Allow IPv6 type request: false
[9240]> SETUP_DATA_CALL 15 0 n.ispsn 0 IP
Note, PDP type on stock rom/APN is not Dual-IP. Without information on how
"Allow IPv6 type request" is tested, for now force the PDP change via apns-conf.xml
Change-Id: I938bf9d1a0b50ec72283fbdba3785832519f3f48
"getprop" depends on the presence of the property workspace
env var, which is created by the first starting service. Why
not make that sysinit itself? (\/) (°,,,°) (\/)
The old Sprint CDMA MMS apn uses the same MCC/MNC pair (310120) and apn
type ("default") as Sprint's LTE/eHRPD service. Thus, Sprint LTE devices
attempt to connect to LTE/eHRPD services using the old CDMA MMS apn first,
which usually fails, and thus delays service establishment.
However, occasionally service "successfully" connects with the CDMA MMS
apn, for unknown reasons, at which point that apn is set as the preferred
apn for LTE connections. Thus, any subsequent LTE/eHRPD connection attempt
fails due to use of the wrong apn.
By removing the old CDMA MMS apn, LTE/eHRPD connections will use the
appropriate apns. Furthermore
com.android.mms.transaction.TransactionSettings::TransactionSettings does
not query the bearer field when looking for valid MMS apns, so the
LTE/eHRPD will continue to work on non-LTE Sprint devices.
Note that with this change, the MMS apn now specifies an mmsproxy.
Change-Id: Iba48bd6d120b02bc6265f958d0e04181d17f5c66
The "import" keyword is only parsed once, for a one shot execution, during
the initial section setup, and before running "on fs". Having an import of
a file that's located in a filesystem other than root will result in an error
like
<3> init: could not import file '/system/etc/init.local.rc' from '/init.rc'
So... any files imported into init need to be moved to the root fs.
While we're at it, move init.rc changes that are specific to CM (and don't
involve modification of preexisting configs) into this file, to ease future
upstream merges (and minimize breakage on devices that override init.rc with
their own variants)
Needs to be paired with the corresponding system/core patch
Change-Id: Iab6340db2e28ef19dbcd84ae5c71737ce0cd491f
Updated mms apn as referred on https://www.emt.ee/mms/htc-android
* added mmsproxy
* added mmsport
Change-Id: Id85920a4d279b54ec17e115b460ea3a6ecb44a93
This patch basically reverts the changes done to spn-conf.xml here:
http://review.cyanogenmod.com/#/c/10038/ , which was then ported to
ics and jellybean branches.
The localized SPN function requires a framework change (Found here:
http://review.cyanogenmod.com/#/c/10037/), which is not
present on ics nor jellybean branches, effectively rendering the
settings useless.
Until the framework changes are present, I think it'd be best to
change this back so that users of these Chinese carriers will at
least have their carrier names displayed correctly.
Patch Set 3: Fix description links.
Change-Id: I12bcf308dd797ea7638327c33f9252a20894ad05
- Sets a working USCC apn that doesn't conflict with Sprint mobile country
and identification codes. Fixes issues with sending mms on Sprint devices.
- Patchset 2: Add LTE-test apns from dumped SGSIII stock ROM.
Change-Id: I2868968fe097f0aaa31b8c8b2d944bf186d197c8
Changed "internet" to "uinternet", which is 3G+.
Removed non-existing network.
Added Hot Mobile and Golan Telecom.
Change-Id: I28a33f18b45f632371be845e251bdf8f872ed47b
Allow user to provide userinit.sh and/or userinit.d/*
scripts under /data/local to be run on each boot.
Change-Id: I96f3034bcdea8d4cc75929d21b69efa31c1cb108
