* these are taken from the latest jfltevzw ota update
* appears bearer is no longer needed
* general cleanup of duplicates
Change-Id: Ida43d7e1419d58a50d16c02d51d2bc4ed3495aa6
Note that I am not on that network myself so I have not been able to verify the settings. However, they are taken from the official support site.
Change-Id: I8b803f5af6e6c307f4ce85f1e20bf75050bcf1be
APN type was set to "default,supl,mms" for both internet and mms. Using CyanogenMod (CM11) it is causing of sending and receiving mms to get stuck forever.
This sets APN type for internet to "default,supl" and "mms" for mms.
Change-Id: Ia2cede31788ab4f76b52d8a2f2ef8a934427169e
LoL, it's http:// not http//
This fixes MMS on SKT LTE
Change-Id: Ic5506d9e3382b37a4cf78f92326d8759111d5c85
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
It appears that some versions of sed do not work with the + symbol.
Instead of checking for one or more digits, check for a digit,
followed by zero or more digits.
Change-Id: I064df6a2bac4a634a3684ac1a5289dca1f4ba29c
Remove the default- and dun-types set on the Verizon MCC=31x
and MNC=48x pairs. This fixes long connection delays to
LTE and EHRPD apns.
It is based on: http://review.cyanogenmod.org/#/c/61711/
Change-Id: Ib39c601cb3610ff972db3849dfc96542f75f5761
This mask a real problem on devices on legacy cdma because we didn't
a stubbed apn for devices that don't use apn to connect to data.
this patch fixes it: http://review.cyanogenmod.org/#/c/62148/
this also problem with sprint 3g APN and lte apn numerics is the same
causing the apn stick together. one of those apn will always stick
persistently unless we force a manual disconnect or by selecting an apn
number from the list and that the 3g apn is due to the effect that it has
no way determining on which apn is used in sprint. they do it by the
numeric, which is why most lte numerics apn is separate from 3g numeric.
We had a large debate on this issue once before, this is the same bug:
http://review.cyanogenmod.org/#/c/51425/
This reverts commit 5de6ec579e.
Change-Id: Ia5c8310af0dce1805ae400d9f78c87c94cdc3cc2
* Because we didn't already have enough did we?
* This fixes "No apn selected for device" when sending/receiving
MMS.
* Removed the MobiPCS apn. Its breaking network extenders because
and I its conflicting with the vzw apn of the same mcc/mnc pair.
I doubt they use this pair anyway.
Change-Id: I70671482af5356ee6562d4d388fda6e90fc5c15b
This reverts commit d2d1a7ffb1.
Revert "selinuxrelabel: Remove attempts to relabel /system"
This reverts commit cae5f24530.
Revert "Recheck /data for selinux labeling"
This reverts commit c4dcb16ca9.
Revert "selinuxrelabel: Add a check for dalvik-cache"
This reverts commit c7e9230614.
Revert "selinuxrelabel: Need to check in priv-app now"
This reverts commit 3013c99acb.
Revert "selinux: When adding userdata labels, do cache too"
This reverts commit 8994907baf.
Revert "selinux: Use a more reliable sentinel to flag /data labelling"
This reverts commit b52874de53.
Change-Id: I7779aaca3b0751ed74d525292681817182a0aa7f
apns re-added from:
- Add apns/eri for Boost Mobile
- Add Japanese APNs/eri for au, docomo MVNO, EMOBILE and SoftBank
Change-Id: I2e0091cc4ed1a5c6957792940aba13b801bf7335
In theory, could have been a good idea, but ultimately just leads to
headaches for device maintainers that need to overlay any of these.
Revert "overlay: remove Verizon specific eri.xml"
This reverts commit 5f92da62c6.
Revert "Add Japanese APNs/eri for au, docomo MVNO, EMOBILE and SoftBank"
This reverts commit eeeb0888d4.
Revert "Add apns/eri for Boost Mobile"
This reverts commit b207e2eda3.
Revert "add more vzw eri's"
This reverts commit 82e10af192.
Revert "multi-carrier overlays: Add eri and config for US Cellular"
This reverts commit 1af75f1ba7.
Revert "Multi-carrier overlays: Fix Mms"
This reverts commit f8b0737a43.
Revert "Generic multi-carrier overlays based on hammerhead"
This reverts commit 6f5758c9c3.
Change-Id: I3495a89ce405362dc558f7ec7f0e61adea9fa507
* Various tools might want to use these values without writing to
them. Set world readable for all nodes.
Change-Id: I5521ca0104e9f21b2e3fdb3469485f887ee50f28
* Remove "Telenor MMS" - Was merged into "Telenor" in a previous patch
* Rename Ludo to Ventelo - Ludo doesn't exist anymore
* Merge "Mobitalk Internet" and "Mobitalk MMS" into a single APN
Change-Id: I77ff06d6c8d6021cd1887468bbeb7ac9315e68bb
On low-end devices, the current 48 fps boot animation can use more than
50% of CPU time, and if the texture cache is enabled, a majority of main
memory as well. For these devices, add half-resolution variants of the
lower-resolution boot animations which display 2x upscaled -- this
greatly speeds the boot process and makes the boot animation run more
smoothly.
Change-Id: I0140616ca38c52a06dd4622f1c20a9ca0da95f4b
Per https://jira.cyanogenmod.org/browse/CYAN-2183 the previous ones
were all incorrect/broken and replaced by the new addition.
Needs testing
Change-Id: Ic6781e9d75da61f8ff2c84de13c3235ee97a029b
PS2: Adjust mnc on coop mobil MMS to be '##' format
Signed-off-by: Henning Nielsen Lund <hnl_dk@amigaos.dk>
Change-Id: I4cd0e838ca274440a56678252c8ad1f209da5a7d
* patch set 1 to 7 doesn't fix the problem, it bruce forces the spn
list to ALL DEVICES.
* this change and http://review.cyanogenmod.org/#/c/57393/
will attack the problem at lowest level, customized it for speed
and memory.
* the best part is that it handles letters and exit the
function when it find a letter in the response from ril.
Change-Id: Ia63309acf38617e68b98ff1068463a942fa793df
* Remove all this stuff. If a device wants ZRAM, it should be
enabled by the maintainer and properly configured and tuned.
* This stuff currently causes a conflict with the ZRAM support
added in Kitkat. Kill it.
Change-Id: Ib2488ea4463e32ec44b65fe786f732145b5b6e23
These are a no-op due to the additional block-device protection from
e18c0d508a
so get rid of them entirely. Any installing recovery (or equivalent
installation process) should handle the labeling of system components
on its own.
Change-Id: I14c50f08efa6f05b03fad4fbc404219cc504e1ff
TBD: Do we still want to label unlabeled files?
This simply adds checks for selinux labels for
files under /data/misc/wifi which were not labeled
correctly for some devices
Change-Id: Iaacf6db792aaea1485502b424d639a1212c5841b
New animation (we're due for a refresh). Additional resolutions
to follow.
PS1: Initial 1080p zip
PS2: Derp on commit message
PS3: Shrink file size (16M to 5M)
PS4: Add other resolutions (w/ jpegoptim)
Change-Id: Id6b12fa76d58769d7ef670f377f39cae1f5c9932
PRODUCT_COPY_FILES vendor/cm/prebuilt/common/media/audio/
notifications/Doink.ogg:system/media/audio/notifications/Doink.ogg
ignored.
This is due to Doink.oog already existing in frameworks/base
Change-Id: I7ab091680f9cb0fb349ff425cb3ee1273d32ee89
Original author Dennis Cleiren has contacted us and asked
to remove 5 audio files that were not intended to be
merged (miscommunication with codeworkx of original patches).
For reference:
http://review.cyanogenmod.org/#/c/13215/http://review.cyanogenmod.org/#/c/16482/
Change-Id: Idad43b62f2d3fbf593b80b56ee129dd6b98e30eb
* combine apns
* leave cdma/gsm files intact but empty until the calls
* are removed from devices cm.mk
Change-Id: I0686ef4ee1fe9b34ac9beaaa2bd43555234f4f6d
These changes fix the error below found in a logcat and clean up some other issues in the file.
"E CM PowerHAL: Error opening /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate: Permission denied"
PS2: tweaked permissions & removed dupilcated entries
Change-Id: I9b1bbe66c36ba0d8de13b8cb9351d2952851c250
Rename of authenticatiotype to authtype wish i accidentaly
wrote wrong by mistake, now it is right and set authentication type to "PAP"
correctly.
Change-Id: If4a235682c3330db7c87531039ffd92ceb6098e4
Sprint CDMA MMS APN was being incorrectly set as default and hipri,
causing LTE connectivity issues because it was prioritized over the
other APN entries for LTE and EHRPD.
Change-Id: I6ca4fd172e2ecc64ca7a2c3fbca5327be61e7b5c
- Add back and fix Sprint APN for 1x/HRPD. Corrects MMS settings and gives a
suitable APN for DcTracker to use for HRPD/EvDo.
- Remove All test SIM APNs. Since no one is running around with a test SIM and
its useless to have a bunch of APNs sharing the same MCC MNC pair.
Change-Id: I1ccbed9b3cdd456e97d205d70bf283785122de8c
This reverts commit ea14a88a2a.
Using the Package Manager prevents any danling wakelock from
killed service/receiver.
Change-Id: Ie3162ca4b18a7bc9c55613af39e88ea980407e5f
In some areas, the new StraightTalk ATT apn settings do
not work, requiring the user to re-add the apn settings
on their own, a feat made more difficult by the fact
that StraightTalk only lists the new apn info on their
website
Change-Id: Id02876d4aa461a3ad8e7211ef45f468b6e181036
Add in Beeline UZ APN, and remove MTS UZ as they are no longer
operating in the region.
Per https://jira.cyanogenmod.org/browse/CYAN-2220
Change-Id: I3cf38a6736d28af8aa568f630dc8bb9344259a82
For almost two months now I've been wondering why my phone's alarm clock
has lost much of its effectiveness. Today the reason finally hit me: the
CyanAlarm tone had been sneakily replaced in commit ID
dbb169ad9c33bdc392b47f7a1bdef3843eff9ab2!
Although the new tone is certainly more pleasant to listen at and
doesn't cause any heart attacks, it is less effective for heavy
sleepers like myself. This commit brings back the old CyanAlarm
version with the new (tentative) name "Nuclear Launch".
Change-Id: I143a4501c45e343a7f697eb1ce5d072fcc2b46f0
Per https://jira.cyanogenmod.org/browse/CYAN-1750 , correct
mnc listing for Claro PR LTE apn is "110" instead of "11".
Patchset #2: Modify non-LTE APNs as well; change commmit title
Patchset #3: Modify commit title to clarify Claro PR adjustments only
Change-Id: Ic18810492a282fc74b5472139404e2db48edd83d
Everything Everywhere (EE) replace Orange UK and T-Mobile UK.
Adapted for CM conf from Guillaume Châtelet's commit:
d9bd5e7d4f
PS1: initial commit
PS2: rebase
Change-Id: Ie1ff90bdffd1cce8c5697624b4c83a06a6729dc3
Since not all recoveries out there will support the OTA packages'
own labeling, check at boot if the system needs labels (and
apply them)
Change-Id: I58767977b90a78a12efe7bd9d713654eadf47e7a
sysinit depends on having the filesystems mounted, and userdata
in particular depends on having /data present. Move its startup
to post-fs-data
Change-Id: Iafcc926a3aa310c1afe501d272df5811da500d86
This commit updates the Personal Argentina APN to the new
datos.personal.com address and adds another set of entries for when
mnc is 341
Change-Id: Ibe17ba00c5ffe3730fce107f0a471ac9c408b636
The error that this patch was guarding against is no longer reproducible
on d2spr.
This reverts commit 285d4c2a4d.
Change-Id: I373ad22a021de74df4f8907dc79717719708431d
MTNL uses 68 and 69 MNC respectively in Delhi and mumbai
forward port of this change
http://review.cyanogenmod.org/#/c/27022/
Signed-off-by: Arnav Gupta <championswimmer@gmail.com>
This is taken from the OTA update for the Note II.
All APNs are currently resolving to the same 2 addresses from my T-Mobile phone.
The T-Mobile support website lists fast.tmobile.com (no hyphen).
I am attempting to mirror the stock OTA from T-Mobile.
Change-Id: I863b517be7dec19620b79fc876a88ba65e4dacba
Using proxy.mvno.tracfone.com should also future proof it if they change the
IP again. proxy.mvno.tracfone.com resolves to (66.209.11.32)
Change-Id: I8cb5b3ce473bef1369ec4ee313759258fc1172d3
* These "phone" provisioned SIM's don't work with the "pta" APN
* LTE and MMS do work properly with "phone" APN
Change-Id: I782f9ee5c642c5354ab35489a9c899a52c0d5107
- remove SpareParts: it's disabled and broken, the options it provides
are either useless/broken or available in development settings
- remove modelid_cfg.sh: no devices are using this any more
- remove opticharger: it's not used any more
Change-Id: I68c86b2407486c4b40998288cf1f70b7cb8170f4
Reportedly Free Mobile users must edit their APN and remove whitespaces to make it work. I searched and fixed the other ", " occurrences too while I was at it.
Change-Id: Ib948dff8329653c42c967c4dae5a6e97086df127
Keep a blacklist of md5 sums for scripts known to cause issues, and
ignore them when installing new builds
Change-Id: I19a88b58194a32da5eb5fe278f2c5b9a145b57be
This is to address hang-ups in eHRPD-LTE hand-offs as witnessed on d2spr.
Log of problem:
[GsmDC-6] Connecting to carrier: 'APN2 EHRPD internet' APN: 'n.ispsn' proxy: 'null' port: 'null'
[0319]> SETUP_DATA_CALL 15 0 n.ispsn null null 0 IPV4V6
....
qmi_ril(0/281): [event] qcril_data_event_hdlr: Dual-IP Partial Retry: Failure
qcril_data_event_hdlr: Dual-IP Partial Retry: Sending setup data call failure code
On stock rom:
[GsmDC-50] Connecting to carrier: 'APN2 EHRPD internet' APN: 'n.ispsn' proxy: '' port: '
[GsmDC-50] Allow IPv6 type request: false
[9240]> SETUP_DATA_CALL 15 0 n.ispsn 0 IP
Note, PDP type on stock rom/APN is not Dual-IP. Without information on how
"Allow IPv6 type request" is tested, for now force the PDP change via apns-conf.xml
Change-Id: I938bf9d1a0b50ec72283fbdba3785832519f3f48
"getprop" depends on the presence of the property workspace
env var, which is created by the first starting service. Why
not make that sysinit itself? (\/) (°,,,°) (\/)
The old Sprint CDMA MMS apn uses the same MCC/MNC pair (310120) and apn
type ("default") as Sprint's LTE/eHRPD service. Thus, Sprint LTE devices
attempt to connect to LTE/eHRPD services using the old CDMA MMS apn first,
which usually fails, and thus delays service establishment.
However, occasionally service "successfully" connects with the CDMA MMS
apn, for unknown reasons, at which point that apn is set as the preferred
apn for LTE connections. Thus, any subsequent LTE/eHRPD connection attempt
fails due to use of the wrong apn.
By removing the old CDMA MMS apn, LTE/eHRPD connections will use the
appropriate apns. Furthermore
com.android.mms.transaction.TransactionSettings::TransactionSettings does
not query the bearer field when looking for valid MMS apns, so the
LTE/eHRPD will continue to work on non-LTE Sprint devices.
Note that with this change, the MMS apn now specifies an mmsproxy.
Change-Id: Iba48bd6d120b02bc6265f958d0e04181d17f5c66
The "import" keyword is only parsed once, for a one shot execution, during
the initial section setup, and before running "on fs". Having an import of
a file that's located in a filesystem other than root will result in an error
like
<3> init: could not import file '/system/etc/init.local.rc' from '/init.rc'
So... any files imported into init need to be moved to the root fs.
While we're at it, move init.rc changes that are specific to CM (and don't
involve modification of preexisting configs) into this file, to ease future
upstream merges (and minimize breakage on devices that override init.rc with
their own variants)
Needs to be paired with the corresponding system/core patch
Change-Id: Iab6340db2e28ef19dbcd84ae5c71737ce0cd491f
Updated mms apn as referred on https://www.emt.ee/mms/htc-android
* added mmsproxy
* added mmsport
Change-Id: Id85920a4d279b54ec17e115b460ea3a6ecb44a93
This patch basically reverts the changes done to spn-conf.xml here:
http://review.cyanogenmod.com/#/c/10038/ , which was then ported to
ics and jellybean branches.
The localized SPN function requires a framework change (Found here:
http://review.cyanogenmod.com/#/c/10037/), which is not
present on ics nor jellybean branches, effectively rendering the
settings useless.
Until the framework changes are present, I think it'd be best to
change this back so that users of these Chinese carriers will at
least have their carrier names displayed correctly.
Patch Set 3: Fix description links.
Change-Id: I12bcf308dd797ea7638327c33f9252a20894ad05
* Promo video here: http://www.youtube.com/watch?v=ogp9f4_yEoU
* It looks *way* better on a device, though :)
* The animation is square, so the names have changed.
Change-Id: I8eebdf29a7d30632d75210a6d3975d7ea17d5246
- Sets a working USCC apn that doesn't conflict with Sprint mobile country
and identification codes. Fixes issues with sending mms on Sprint devices.
- Patchset 2: Add LTE-test apns from dumped SGSIII stock ROM.
Change-Id: I2868968fe097f0aaa31b8c8b2d944bf186d197c8
Changed "internet" to "uinternet", which is 3G+.
Removed non-existing network.
Added Hot Mobile and Golan Telecom.
Change-Id: I28a33f18b45f632371be845e251bdf8f872ed47b
From http://androidsu.com/superuser/
This brings the version in line with the current version of
the su binary and fixes the bug where su approval is
not stored.
Change-Id: I0ca67ae79942f34eaa16cc3cf26b312cf7a8cd67
backuptool should not be messing with whether /system is mounted
or not as it screws up the expectations of other scripts run
in the install process. instead the mounting/unmounting
functionality has been moved to ota_from_target_files
Change-Id: I0711afd517638e7d0a0c39369d3a776748245dd2
New notifications and ringtones were added[1], but without proper
metadata. This caused "House_of_house.ogg" for example to be
displayed as "House_of_house" in the ringtone-selection dialog.
Adding the TITLE tag fixes this.
[1]http://review.cyanogenmod.com/#/c/16482/
Change-Id: Ie8b7baeb42410205b399bbc2014d09c6d8946a4e
Allow user to provide userinit.sh and/or userinit.d/*
scripts under /data/local to be run on each boot.
Change-Id: I96f3034bcdea8d4cc75929d21b69efa31c1cb108
* Default for tablet is horizontal-1280x800
* Default for phone is vertical-480x800
* Override using TARGET_BOOTANIMATION_NAME in cm.mk (must come before
inherit of CM base product.
Change-Id: Ibd01236847b4f1de0cfd4246c8bd93b1f047005a
Tips & Tricks
=============
* 50-cm.sh contains only a reference implementation. You may customize the methods however you wish.
For example, 20-foobar.sh pre-backup can use a loop with conditionals to generate a dynamic backup list in
/tmp/foobar_file_list which is later printed by list_files() so the backup method will act on those files.
* Optional methods pre-backup, post-backup, pre-restore, or post-restore may be defined for special purposes.
* Inject new files into /tmp/addon.d/ prior to backuptool.sh backup if you want to act during the current CM upgrade.
* Delete files from /tmp/addon.d/ during post-restore if you want to permanently remove files from /system/addon.d/
Addons may use this approach to run a script only once.
* Scripts run in sort -n order. Prefix with numbers 00 through 99 if want to run in a particular order.
* You can have two separate scripts, implementing only backup in one, and only restore in the other with a different
number prefix of each. This allows even greater control the backup/restore order even further.
* You could use pre-backup to generate a one-time use backup script in /tmp/addon.d/ that deletes itself in
post-restore.
Patch Series
============
http://review.cyanogenmod.com/#change,13265
CyanogenMod/android_build
* edify generator
http://review.cyanogenmod.com/#change,13266
CyanogenMod/android_system_core
* permissions on /system/addon.d
http://review.cyanogenmod.com/#change,13267
CyanogenMod/android_vendor_cm
* 50-cm.sh reference backup script
* modular backuptool.sh
* support backuptool.functions used by /system/addon.d/*.sh scripts
Change-Id: Ifd5eaf9dcfd68d92e5043c21d1bae1dc0ad54860
A Mobifone user contacted me and alerted me that the APN settings for Mobifone was wrong and provided the correct ones.
Change-Id: I8a6b9bde39d7394db2fdf7261b2a8026692fb808
Currently the tool only backs up the lib, but not the apk.
Seeing as how the market version of voice search is still not
up to date with the current release, it should still be backed
up with this script.
Change-Id: Ia130bb3e289fc3c2206a60ed0fcfd7dab816425d
Since the destination for all backed up files during an installation was
/tmp, all files sharing a name (like the full_model.bin files from
the various face detectors) ended up being restored as copies of
the last such file, effectively breaking the backup.
As a fix, when backing up files, use the entire original path to make
sure they're kept separate and restorable.
Change-Id: I399f7a9433a225871d97e0ecaeb051a90e68696b
At present, when running a busybox shell ("busybox sh") from mksh
(/system/bin/sh), one gets the following message before every command line:
sh: precmd: Permission denied
This is due to mkshrc exporting a PS1 which depends on a mkshrc defined
function, "precmd". Since "busybox sh" does not source mkshrc, it does not
have this function defined, resulting in the above error.
By not exporting PS1, "busybox sh" uses its own reasonable default. mksh
subshells continue to work as usual, since they (re)source /etc/mkshrc
anyways.
Change-Id: Ic9182e42aa033e811300d9e6e8d6d3f43e14e58f
increase required space needed for market downloads from ~20MB
to ~60MB (~105MB if system dalvik is on /cache)
Change-Id: I52fcd648374db4bf73ff478e9991a6a3162521d5
This corrects the MMS settings to match those seen on Virgin provided stock handsets and
fixes receiving of media messages.
MNCs 31 and 32 are likely to also require changing but have not been tested so are
unchanged by this patch.
Change-Id: I6bc40fa7bfa7f21cf3c6a36cdef2b46512075c6a
Signed-off-by: Pat Thoyts <patthoyts@gmail.com>
According to packages/providers/TelephonyProvider/src/com/android/providers/telephony/TelephonyProvider.java,
getRow() method is knowing nothing about such attribute and just ignore it.
So it should do no harm to remove such.
There's a "authtype" attribute that is parsed, but its value should be an integer.
Change-Id: I9cca16cdd68db30c3a1f76149b0699d49d82fb71
It seems such entries are coming from apps like APN backup&restore,
which have a slightly different format.
Change-Id: I51d949e4dc13e832c84ecccd66cd9cd723ea2ec4
This duplicate appeared with commit 294302200411907d848a0f51652a233398056360
"apn list refresh from paulweiss"
Change-Id: I0b66591088f67d04e8b7f94ebc5d1e41b1c45596
Previous default apn is a provider's special offer. After first connect
provider eats 5 UAH ($0.62), and users does not have enough time to disable
data at first boot.
Change-Id: I36f753608c91a0acba2dace4bebd86b4324a1f09
This is regarding the following patch:
5cdb4ec653
The patch which was to allow custom_backup_list.txt to be maintained while flashing via ROMManager
WHILE the flag/file force_backuptool is set/present still has issues. There are 2 reasons for this.
1) The flag is only checked during the first pass (backuptool.sh backup), as once /etc/force_backuptool
is known to exist, all files are moved to /tmp/backupdir as designated, but when the script is
ran again once /system has been wiped and updated, the file /etc/force_backuptool no longer exists
as it was moved to /tmp/backupdir/force_backuptool, so the script fails as it is not checking that
location.
2) When the backuptool.sh script is called, the above function (checking for force_backuptool) is called
*before* the /system partition is mounted. This therefor ignores the file regardless of whether it
exists or not. This is caused by check_installscript being called at the wrong point of the script.
There are therefor 2(two) main changes to this script to allow the force_backuptool override to work.
The first being within the main function of check_installscript, and the second being the location of
where check_installscript is called (ie, I moved it to below check_prereq call in the case statement,
as mounting is called before the check_prereq function checks if the ROM version is the same).
This affects *all* devices.
Change-Id: Ia7438f396eaa91b0723e56bb32ce98725e2b2025
The new Gtalk app with video and voice chat from the Nexus S
OTA update is currently not backed up by the script because
Google renamed it Talk2.apk and added a new lib for it.
Change-Id: I2b0245d561584fa4d84e7d424653543d723a1ac6
This change adds a check for the ramzswap device. This is useful
if the kernel includes ramzswap built-in and not as a module.
Change-Id: I39105064c8fdd678ca3d7e332703b6040806f601
Support module placement other than the "modules_install" location.
(i.e. /system/lib/modules/ or /system/lib/modules/`uname -r`/)
Change-Id: I04c5175b13655c09e1eb9b47fa0745d1cfcb376d
This app is part of the new Gapps from the GRI40 N1 update.
Try it with these Gapps I packaged for lack of a better source.
Change-Id: Ib49fd13e0270dfa15d5e05843a6f11f2b2d6388e
http://bit.ly/hfgtL0
It was not working until I noticed the error,
and works since I manually edited it. First
time I thought I had accidentally edited it
to a wrong value, then I noticed that I needed
to edit every time I updated cyanogenmod, so
I found the error in the sources and I'm
reporting it here to save future updates...
It is
$ host 193.209.134.141
141.134.209.193.in-addr.arpa domain name pointer mms-service.mobile.sonera.net.
and not
$ host 93.209.134.141
141.134.209.93.in-addr.arpa domain name pointer p5DD1868D.dip0.t-ipconnect.de.
Change-Id: I62cfd18f29076189e1da5379bb37dc5bb533c815
