replicant-packages_apps_Email/res/xml/providers.xml
Andrew Stadler 8b91975fa5 Clean up transport encryption & port options
* Remove SSL-Optional and TLS-Optional choices from UI
* Remove SSL-Optional and TLS-Optional choices from providers.xml
* Switch over most SMTP connections from 25 to 587
* Clean up the providers list which has a lot of "optional" cases
    that were probably falling back to unencrypted.

Fixes bugs:
2110243	Settings UI shouldn't offer SSL/TLS (if available) options
2089070 Update list of providers

Change-Id: I57be57b349eed33a5284121d904528279a36a91c
2009-09-17 23:47:00 -07:00

268 lines
13 KiB
XML

<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2008 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!--
This file contains configuration data for commonly-used email providers.
==== CONTENT GUIDELINES ====
This file should only be used for email providers that are considered "universal"
and are appropriate for *all* android platform devices. These entries must be accessible
from all networks. It should be reasonable for any user to obtain an account on these
networks, and test accounts must be easily obtainable. No entries should be added
that are device, product, or carrier-specific.
Entries that are device, product or carrier-specific should be added as overlays
in the appropriate providers_product.xml file.
==== FORMAT OF ENTRIES ====
This file is used to specify providers that we know default settings for
so that the user can set up their account by simply entering their email
address and password.
When a user starts this process, the email address is parsed, the domain
broken out and used to search this file for a provider. If one is found the
provider's settings are used to attempt to connect to the account.
At this time, the id and label attributes are not used. However, please include them
if you make edits to this file. id must also be completely unique. label will be shown
to the user when there are multiple options provided for a single domain (not currently
supported).
A provider contains the settings for setting up an email account
that ends with the given domain. Domains should be unique within
this file. Each provider should have at least one incoming section and
one outgoing section. If more than one is specified only the first
will be used.
Valid incoming uri schemes are:
imap IMAP with no transport security.
imap+tls+ IMAP with required TLS transport security.
If TLS is not available the connection fails.
imap+ssl+ IMAP with required SSL transport security.
If SSL is not available the connection fails.
pop3 POP3 with no transport security.
pop3+tls+ POP3 with required TLS transport security.
If TLS is not available the connection fails.
pop3+ssl+ POP3 with required SSL transport security.
If SSL is not available the connection fails.
Valid outgoing uri schemes are:
smtp SMTP with no transport security.
smtp+tls+ SMTP with required TLS transport security.
If TLS is not available the connection fails.
smtp+ssl+ SMTP with required SSL transport security.
If SSL is not available the connection fails.
The URIs should be full templates for connection, including a port if
the service uses a non-default port. The default ports are as follows:
imap 143 pop3 110 smtp 587
imap+tls+ 143 pop3+tls+ 110 smtp+tls+ 587
imap+ssl+ 993 pop3+ssl+ 995 smtp+ssl+ 465
The username attribute is used to supply a template for the username
that will be presented to the server. This username is built from a
set of variables that are substituted with parts of the user
specified email address.
Valid substitution values for the username attribute are:
$email - the email address the user entered
$user - the value before the @ sign in the email address the user entered
$domain - the value after the @ signin the email address the user entered
The username attribute MUST be specified for the incoming element, so the POP3 or IMAP
server can identify the mailbox to be opened.
The username attribute MAY be the empty string for the outgoing element, but only if the
SMTP server supports anonymous transmission (most don't).
-->
<providers>
<!-- Gmail variants -->
<provider id="gmail" label="Gmail" domain="gmail.com">
<incoming uri="imap+ssl+://imap.gmail.com" username="$email" />
<outgoing uri="smtp+ssl+://smtp.gmail.com" username="$email" />
</provider>
<provider id="googlemail" label="Google Mail" domain="googlemail.com">
<incoming uri="imap+ssl+://imap.googlemail.com" username="$email" />
<outgoing uri="smtp+ssl+://smtp.googlemail.com" username="$email" />
</provider>
<provider id="google" label="Google" domain="google.com">
<incoming uri="imap+ssl+://imap.gmail.com" username="$email" />
<outgoing uri="smtp+ssl+://smtp.gmail.com" username="$email" />
</provider>
<provider id="android" label="Android" domain="android.com">
<incoming uri="imap+ssl+://imap.gmail.com" username="$email" />
<outgoing uri="smtp+ssl+://smtp.gmail.com" username="$email" />
</provider>
<!-- USA -->
<provider id="aim" label="AIM" domain="aim.com">
<incoming uri="imap://imap.aim.com" label="IMAP" username="$email" />
<outgoing uri="smtp://smtp.aim.com" username="$email" />
</provider>
<provider id="aol" label="AOL" domain="aol.com">
<incoming uri="imap://imap.aol.com" label="IMAP" username="$email" />
<outgoing uri="smtp://smtp.aol.com" username="$email" />
</provider>
<provider id="comcast" label="Comcast" domain="comcast.net">
<incoming uri="pop3+ssl+://mail.comcast.net" username="$user" />
<outgoing uri="smtp+ssl+://smtp.comcast.net" username="$user" />
</provider>
<provider id="compuserve" label="CompuServe" domain="cs.com">
<incoming uri="imap://imap.cs.com" username="$user" />
<outgoing uri="smtp://smtp.cs.com" username="$user" />
</provider>
<provider id="cox" label="Cox" domain="cox.net">
<incoming uri="pop3+ssl+://pop.east.cox.net" username="$user" />
<outgoing uri="smtp+ssl+://smtp.east.cox.net" username="$user" />
</provider>
<!-- Note: smtp.mac.com accepts TLS but the cert is untrusted -->
<provider id="dotmac" label=".Mac" domain="mac.com">
<incoming uri="imap+ssl+://mail.mac.com" username="$email" />
<outgoing uri="smtp://smtp.mac.com" username="$email" />
</provider>
<provider id="earthlink" label="Earthlink" domain="earthlink.net">
<incoming uri="pop3://pop.earthlink.net" username="$email" />
<outgoing uri="smtp://smtpauth.earthlink.net:587" username="$email" />
</provider>
<provider id="juno" label="Juno" domain="juno.com">
<incoming uri="pop3://pop.juno.com" username="$user" />
<outgoing uri="smtp://smtp.juno.com" username="$user" />
</provider>
<provider id="live" label="Windows Live Hotmail Plus" domain="live.com"
note="@string/provider_note_live">
<incoming uri="pop3+ssl+://pop3.live.com" username="$email" />
<outgoing uri="smtp+tls+://smtp.live.com" username="$email" />
</provider>
<provider id="hotmail" label="Windows Live Hotmail Plus" domain="hotmail.com"
note="@string/provider_note_live">
<incoming uri="pop3+ssl+://pop3.live.com" username="$email" />
<outgoing uri="smtp+tls+://smtp.live.com" username="$email" />
</provider>
<provider id="msn" label="Windows Live Hotmail Plus" domain="msn.com"
note="@string/provider_note_live">
<incoming uri="pop3+ssl+://pop3.live.com" username="$email" />
<outgoing uri="smtp+tls+://smtp.live.com" username="$email" />
</provider>
<!-- Note: Mac Mail.app sets IMAP to mail.mac.com, but it's the same server -->
<!-- Note: smtp.mac.com accepts TLS but the cert is untrusted -->
<provider id="mobileme" label="MobileMe" domain="me.com">
<incoming uri="imap+ssl+://mail.me.com" username="$email" />
<outgoing uri="smtp://smtp.me.com" username="$email" />
</provider>
<provider id="netzero" label="NetZero" domain="netzero.com">
<incoming uri="pop3://pop.netzero.com" username="$user" />
<outgoing uri="smtp://smtp.netzero.com" username="$user" />
</provider>
<provider id="sbcglobal" label="SBC Global" domain="sbcglobal.net">
<incoming uri="pop3://pop.sbcglobal.yahoo.com" username="$email" />
<outgoing uri="smtp://smtp.sbcglobal.yahoo.com" username="$email" />
</provider>
<provider id="verizon" label="Verizon" domain="verizon.net">
<incoming uri="pop3://incoming.verizon.net" username="$user" />
<outgoing uri="smtp://outgoing.verizon.net" username="$user" />
</provider>
<provider id="yahoo" label="Yahoo Plus" domain="yahoo.com" note="@string/provider_note_yahoo">
<incoming uri="pop3+ssl+://plus.pop.mail.yahoo.com" username="$user" />
<outgoing uri="smtp+ssl+://plus.smtp.mail.yahoo.com" username="$user" />
</provider>
<!-- UK -->
<provider id="aol-uk" label="AOL" domain="aol.co.uk">
<incoming uri="imap+ssl+://imap.uk.aol.com" label="IMAP" username="$user" />
<outgoing uri="smtp+ssl+://smtp.uk.aol.com" username="$user" />
</provider>
<provider id="bt" label="BT Internet" domain="btinternet.com">
<incoming uri="pop3://mail.btinternet.com" username="$email" />
<outgoing uri="smtp://mail.btinternet.com" username="" />
</provider>
<provider id="yahoo-uk" label="Yahoo" domain="yahoo.co.uk" note="@string/provider_note_yahoo_uk">
<incoming uri="pop3+ssl+://pop.mail.yahoo.co.uk" username="$user" />
<outgoing uri="smtp+ssl+://smtp.mail.yahoo.co.uk" username="$user" />
</provider>
<!-- Germany -->
<provider id="freenet" label="Freenet" domain="freenet.de">
<incoming uri="pop3://mx.freenet.de" username="$user" />
<outgoing uri="smtp+ssl://mx.freenet.de" username="$email" />
</provider>
<provider id="gmx" label="GMX" domain="gmx.de">
<incoming uri="pop3://pop.gmx.net" username="$email" />
<outgoing uri="smtp://mail.gmx.net" username="$email" />
</provider>
<provider id="T-Online" label="T-Online" domain="t-online.de"
note="@string/provider_note_t_online">
<incoming uri="pop3://popmail.t-online.de" username="$email" />
<outgoing uri="smtp://smtpmail.t-online.de" username="$email" />
</provider>
<provider id="web.de" label="Web.de" domain="web.de">
<incoming uri="pop3://pop3.web.de" username="$user" />
<outgoing uri="smtp://smtp.web.de" username="$user" />
</provider>
<!-- Netherlands -->
<!-- TODO: For all of these, please confirm POP3, and switch to IMAP if supported -->
<!-- TODO: username="" in incoming element is broken - will not work -->
<!-- Disabled until username="" is resolved
<provider id="hetnet" label="Het Net" domain="hetnet.nl">
<incoming uri="pop3://pop.hetnet.nl" username="" />
<outgoing uri="smtp://mailhost.hetnet.nl" username="" />
</provider>
-->
<!-- Disabled until test accounts provided
<provider id="planet inet" label="Planet Internet" domain="planet.nl">
<incoming uri="pop3://pop.planet.nl" username="$user" />
<outgoing uri="smtp://mail.planet.nl" username="" />
</provider>
-->
<!-- TODO: username="" in incoming element is broken - will not work -->
<!-- Disabled until username="" is resolved
<provider id="tiscali" label="Tiscali" domain="tiscali.nl">
<incoming uri="pop3://pop3.tiscali.nl" username="" />
<outgoing uri="smtp://smtp.tiscali.nl" username="" />
</provider>
-->
<!-- Disabled until test accounts provided
<provider id="wanadoo" label="Wanadoo" domain="wanadoo.nl">
<incoming uri="pop3://pop.wanadoo.nl" username="$user" />
<outgoing uri="smtp://smtp.wanadoo.nl" username="$user" />
</provider>
-->
<!-- Poland -->
<provider id="onet" label="Onet.pl" domain="poczta.onet.pl">
<incoming uri="pop3://pop3.poczta.onet.pl" username="$email" />
<outgoing uri="smtp://smtp.poczta.onet.pl" username="$email" />
</provider>
<provider id="wirtualna" label="Wirtualna Polska" domain="wp.pl">
<incoming uri="pop3://pop3.wp.pl" username="$user" />
<outgoing uri="smtp://smtp.wp.pl" username="$user" />
</provider>
<provider id="interia" label="Interia" domain="interia.pl">
<incoming uri="pop3+ssl://poczta.interia.pl" username="$user" />
<outgoing uri="smtp+ssl://poczta.interia.pl" username="$user" />
</provider>
<provider id="o2" label="O2" domain="o2.pl">
<incoming uri="pop3+ssl://poczta.o2.pl" username="$user" />
<outgoing uri="smtp+ssl://poczta.o2.pl" username="$user" />
</provider>
</providers>