Upon hitting reply all, all email addresses except that of the source message sender
go in the CC: field. Previously they all went in the TO: field. Updated 3 tests
in MessageComposeTests.java (testReplyAllAddresses1(), testReplyAllAddresses2(), and
testReplyAllAddresses3()) to reflect this new behavior.
Bug: 4534058
Change-Id: I852daebdd8843a45f685eecc67f757c87925bb6c
Now we reuse the same instance of the fragment for nested mailbox
navigation. (Don't use fragment transaction)
"CursorWithExtras" now only has the child count, so I removed the
bundle version and added a concrete class to MailboxFragmentAdapter.
With this CL the nested mailbox navigation on 1-pane should work, but
not back navigation. (Back press event isn't connected to the
fragment yet.)
Change-Id: I2c23651d9c8edb5fe062c68bbb9b462c8949ded4
The new widget UX allows for a single display mode for the widget. This can
be configured when the widget is added or at a later time during widget
re-configuration.
We don't have the configuration activity (yet). We first need to restructure
the widget to take a single account / mailbox combination. Hooking up the
configuration activity will occur in a future CL.
Change-Id: I38a5796c44938a6abd0d2bb50ac77241cc86a497
- Also removed the accoundId parameter, which wasn't used.
- Also cleaned up MailboxListFragment.onDrop.
(the restored Message was only used to get the account id, but
it's no longer needed.)
Bug 4384642
Change-Id: I8f6635011dae0529a82972617101e1c130090b76
We need to pass around the account ID with onMailboxSelected too.
(It's kinda sad it wouldn't have happened if we had par-account starred
mailbox.)
Also made sure MailboxListItem.mMailboxId now really contains only a mailbox
ID. Before this chage, we stored an account ID to this for an account row
on the combined mailbox.
Bug 4452811
Change-Id: I732fd8eb18f787f4a700a45a40768f96e3bb8751
Account shortcuts used to point at MessageList directly with a
content://com.android.email.provider/account/ACCOUNT-UUID URI.
Hook these intents and open Welcome instead.
On Eclair and before, we stored an account-ID directly as an extra,
but this style is no longer supported.
Bug 4208879
Change-Id: I9fecb0723743377a6d7c7e84626e8613f2356492
The key for the Store cache was not adjusting properly for account
changes (such as port changes, etc...). As such, it was possible to
get an invalid store.
Now, there's problem with leaking Account objects if the store account
changes (see bug 4440839). This is "okay" for now since account changes
are fairly uncommon and Account objects are light. However, this should
be fixed at some point.
Change-Id: I4ddcbc3e2759b7b1374d0300706373678dedec94
No real code changes; just moving where code / constants live. Removed
one unused method of Store.
Change-Id: Ie7532381759a568cb23601e1071c8e199b6beb07
Split out ImapConnection to its own class. This allows us to update ImapStore
without worrying about links between it and the connection.
Also, added a bit more safety to the classes in terms of correctly freeing
resources. Whenever the connection is closed, it now releases all resources.
Additionally, if the connection is ever put back in the pool, any response
data is released.
Change-Id: Ie3bda40d677707a0d6655f57175e58dece539e19
- Moved the method to EmailCommon.
- Use *_SELECTION for magic mailboxes
(meaning we now use subqueries for magic mailbox selections, rather than
building the mailbox ID list by ourselves)
Change-Id: I3ebf6af62fd912fea6faea0f75e05fc61c87af3b
This activity already supports phone and tablet mode.
Only renames in this change - no other change.
Change-Id: Ieca17137af45e3860812091f69cd4d9b55ddf3ec
If there is only one unread&unseen message in the notification, clicking the
notification will automatically open the message view fragment. Otherwise,
the message list fragment will be opened.
Change-Id: I22778258836a36f289d71b99a6214ec82778f385
* This is a serious bug dating back to the first Honeycomb release
* It was possible that a newly created Message could not yet be
committed to the database when the AttachmentDownloadService
tries to download one of that message's attachments.
* ADS, when it sees that the message (apparently) doesn't
exist, deletes the Attachment (it appears to be orphaned)
* The effect is that the user never sees one of the attachments
in a message.
* This bug has been reported externally
* The fix is simply to check for the message's existence before
deciding to delete it (this check will always work properly)
Bug: 4409692
Change-Id: I106ed2fe88d2435ad7a462fced5cb307c2559fd6
The primary purpose of this CL is to remove phone activities, so the
one pane implementation is very much temporary and primitive, but it
should offer minimal operations.
Change-Id: If57f81db7c605c95664d49044a5cc082beda59c0
We were sort of using observers to maintain the new message notifications.
However, other parts of the code would poke into the notification controller
to set things such as a list of newly added message IDs. Now, we rely
exclusively on db observers to manage notifications.
As a side effect of this, we now set the notification text correctly to be
the most recently _added_ message. This may be different than the most recently
sent message [since there may be a non-negligable delta between when the
message was sent and when it was received].
NOTE this still suffers from an outstanding bug where we continue to get
notifications when the Eamil UX is visible. That and monitoring changes to the
account table will be addressed in future CLs.
Change-Id: I4c68273716cc685574a1ca71e5d634f53fe0d882
The notifiaction table will be used by the updated notification controller.
The table stores the key and the associated last notified message key and
message count.
Change-Id: I037b5374ab51620f1cffc8b41391db858cfd3a2d
This introduces tab navigation on large screens with action bar (a
dropdown for the phone view is yet to be implemented, though the
internals are ready for it).
This requires the side effect that restoring a draft
reply/replyall/forward will attempt to also load the source message in
full for additional information. If that load fails for whatever reason,
the draft just remains a "compose" as it used to before.
Bug: 3117253
Change-Id: I9cff5ed4a5e9abd1338b6dbde28ceb3e4dc2b761
* Use EmailProvider to backup/restore into a backup database
* Remove all of the old AccountBackupRestore code
* Get rid of the legacy Account class and all of the Preferences
crap that referenced it
* Remove corresponding tests
Change-Id: I2de75aafdacc87246174303961e58547303f641e
Now attachments are actually stored in an explicit list, instead of
being inferred from the state of the UI. This makes it possible to
switch states and restore attachments, and test.
Change-Id: I8c5f80f17f8c9e78d880ac4a1ac6ae22c2ec0579
If we receive new messages, we may display a notification to the user. If
those same messages are read elsewhere (i.e. via a web client), we will
remove the notification.
Change-Id: Iba09afe01942e0deaac8210fd6f9b315b1c8c93f
* Replace crazy (and soon to be "full") bit fields stored in an account's
securityFlags with a row in a newly created Policy table (thus, fully
expandable)
* Update code from database version 17 to 18; adds Policy table, a
policyKey row in Account, and a revised trigger that deletes Policy
information for deleted Accounts
* Update old PolicySet unit tests to work against the new Policy class
* Add test for the conversion of securityFlags to Policy
* Tested in a variety of scenarios; appears to be functionally equivalent
Change-Id: I1505ee75230d6a0d3c2b62a46326f39c2c7f9eb5
- "save draft" no longer closes the message
- ensure consistent state if there are successive saves
- misc changes to the way a message is loaded if there is a pending save
Bug: 3072398
Change-Id: I9cd01319772293e4d410020ab27603821a95ec9f
* javadoc methods
* rename some methods
* remove duplicate code; now new message and other account notifications
are created with the same code
Change-Id: Iecf70494b6407a9a73380de103390a59d006191b
- Now all the UI stuff is owned by the UI controller
- Except temporary UI (exchange search and per-mailbox-settings)
- Except error banner
This should be moved too eventually, but I consider it as a low-priority.
I'll leave it as-is for the time being.
- Moved RefreshTask too. The spec for refresh has dependency to the UI.
(i.e. implicit refresh of the mailbox list may not be necessary for
the phone.)
Also renamed the main activity to EmailActivity.
Change-Id: I00585856bdacf69aa4e104178a5cf7352ff6d592
- Now we always use a fragment as a callback, rather than assuming the parent
activity implements it.
- Use a generics trick to make sure the callback fragments really implements
Callback.
(Might be abuse of a language feature, but it's at least safer than runtime
check...)
Bug 4314669
Bug 4345496
Change-Id: If4048d456b298784097e202cffab170177ac7b2d
not making any real code changes:
* removed deprecated, unused methods
* remove 'throws' clauses when that exception is never thrown
* renamed method Controller#moveMessage()-->moveMessages()
Change-Id: Ifd006f760f0c19283e94a11a45c71295c8da35f7
For IMAP, it's possible for a mailbox to exist on the server, but, to be
unselectable. Previously, these folders were never added to the folder list.
However, with nested folder support, we need to have these folders in the
UX so the user can get to its sub-folders (which may be selectable).
Change-Id: I11135fafbb14b40660983804fb86bd223e180d5e
