MatrixCursor doesn't do this, so we need to add our own cache.
Depends on Ia5ffd31f54a2a335f495df5e0d1a0886ee08c14b
Change-Id: Ica78e3cec747bf86fcef16508156e359216c64fe
* Remove PolicyService APIs policiesRequired, policiesUpdated,
isSupported, clearUnsupportedPolicies, and isActiveAdmin
* Add PolicyService API setAccountPolicy, which is the sole
method by which security policies are promulgated
* Add protocolPoliciesEnabled and protocolPoliciesUnsupported
to the Policy class; these are packed, localized strings
indicating policies that the protocol itself have enabled
and/or cannot support (i.e. these are policies that are
unknown to the DPM, e.g. don't load attachments)
* Differentiate in security notifications between three kinds
of policy changes - changes that don't require user
intervention (e.g. reducing requirements), changes that
require user intervention (the legacy notification), and
changes that make the account unsyncable (e.g. the server
adding an unsupportable policy). Handle all possible policy
changes cleanly.
* Make security notifications per account (with multiple
accounts, notifications would get arbitrarily munged)
* Expose ALL enforced policies via the account settings
screen in two categories: policies enforced (including
both policies enforced by the DPM and policies enforced
by the protocol) and policies unsupported (note that these
can only be seen if policies are changed after an account
is created; we do not allow the creation of an account
when any required policies are unsupported). Add a
button that forces a sync attempt, for accounts that
are locked out, but whose policies have changed on
the server (this would otherwise require a reboot).
* Updated unit tests
Bug: 5398682
Bug: 5393724
Bug: 5379682
Change-Id: I4a3df823913a809874ed959d228177f0fc799281
We always switched to combined view when we tapped "Starred" in a
mailbox list. This was confusing since tapping to show the mailbox list
will take you to the mailbox list for the combined view, even if there's
only one account on the device! Other confusing things happened like
showing coloured account chips, even if there's only one account.
This fixes it so that we pass the account ID when building the
selection. Lots of wiring to make it happen, but very little change
overall.
Bug: 5388326
Change-Id: I1fe52f211cceca0c1b26581e200f3c7adcd0734a
* Move AccountReconciler to the Email app (from EmailCommon)
* Ensure that Controller.deleteAccountSync() performs ALL actions
needed to clean up after an account deletion (delete attachment
files, reset policies, refresh the UI, etc.)
* Add reconcileAccounts() API to AccountService
* Remove accountDeleted() and restoreAccountsIfNeede() from the
AccountService API
* Remove unused callback
Bug: 4883073
Bug: 4767084
Change-Id: I43ffaf009db1a6f306bb0f2a74fb4dd3b2c4b966
* This wasn't working with the new code and the unit test wasn't
testing this case.
* Updated code in EmailProvider and added a test case
Change-Id: I75c23423c4f43e4201d446886d92a5312fa8a084
* Guarantee that up to 16 Account (with HostAuths), and Policy rows
are always cached. Also, 6 commonly used Mailboxes per Account
(Inbox, Outbox, Drafts, Sent, Trash, and Search)
* Precache these rows when EmailProvider starts up
* Ensure that newly added, precachable rows are cached when created
* Clean up some inefficient/wrong caching code
* Fix a commonly called method in NotificationManager in which we
load a single Mailbox row using selection vs withAppendedId
* Confirm that we don't read from the database in typical use and
heavy message loading
* Add a special URI for finding mailbox by type (using the cache)
* Add special-case code for EmailContent.count(Account.CONTENT_URI)
which is used in a number of places (including on the UI thread)
and whose value is easily determined
* Add a special URI to get the default account id
* Confirm that all unit tests work
The goal here is to be able to load all Account, HostAuth, Policy,
and Mailbox objects (by id) without worrying about disk access.
There will still be a single disk read for uncommon Mailbox reads,
but this should be considered acceptable.
Change-Id: Ibc9aa7acc73185e360b0b6f3053b90a985e97210
TODO: Unit tests
In order to reduce the UI initialization code, move
let EmailProvider restore accounts when it opens the DB.
Backup can be moved too, but I just leave it as a TODO.
Change-Id: Id5c1810904db6abaecbfecbaa8d2d53834ebf07b
- Moved the method to EmailCommon.
- Use *_SELECTION for magic mailboxes
(meaning we now use subqueries for magic mailbox selections, rather than
building the mailbox ID list by ourselves)
Change-Id: I3ebf6af62fd912fea6faea0f75e05fc61c87af3b
* This is a serious bug dating back to the first Honeycomb release
* It was possible that a newly created Message could not yet be
committed to the database when the AttachmentDownloadService
tries to download one of that message's attachments.
* ADS, when it sees that the message (apparently) doesn't
exist, deletes the Attachment (it appears to be orphaned)
* The effect is that the user never sees one of the attachments
in a message.
* This bug has been reported externally
* The fix is simply to check for the message's existence before
deciding to delete it (this check will always work properly)
Bug: 4409692
Change-Id: I106ed2fe88d2435ad7a462fced5cb307c2559fd6
We were sort of using observers to maintain the new message notifications.
However, other parts of the code would poke into the notification controller
to set things such as a list of newly added message IDs. Now, we rely
exclusively on db observers to manage notifications.
As a side effect of this, we now set the notification text correctly to be
the most recently _added_ message. This may be different than the most recently
sent message [since there may be a non-negligable delta between when the
message was sent and when it was received].
NOTE this still suffers from an outstanding bug where we continue to get
notifications when the Eamil UX is visible. That and monitoring changes to the
account table will be addressed in future CLs.
Change-Id: I4c68273716cc685574a1ca71e5d634f53fe0d882
* Use EmailProvider to backup/restore into a backup database
* Remove all of the old AccountBackupRestore code
* Get rid of the legacy Account class and all of the Preferences
crap that referenced it
* Remove corresponding tests
Change-Id: I2de75aafdacc87246174303961e58547303f641e
* Replace crazy (and soon to be "full") bit fields stored in an account's
securityFlags with a row in a newly created Policy table (thus, fully
expandable)
* Update code from database version 17 to 18; adds Policy table, a
policyKey row in Account, and a revised trigger that deletes Policy
information for deleted Accounts
* Update old PolicySet unit tests to work against the new Policy class
* Add test for the conversion of securityFlags to Policy
* Tested in a variety of scenarios; appears to be functionally equivalent
Change-Id: I1505ee75230d6a0d3c2b62a46326f39c2c7f9eb5
We now create folder hierarcies for IMAP. This also includes a nifty SQL
statement that will get your existing database into shape.
Change-Id: If07a0632e9b250cf0c33c3e16bfba5816beab94c
The logic is simplified by creating database rows for new mailboxes down
in Imapstore. This means that the difference between local and remote folder
lists are mailboxes that need to be deleted.
Note -- this is still not the final CL. We probably update the database too
frequently and the column values aren't updated to support nested folders.
Change-Id: Ifbe4e0cf74ba81e5b6156b452ab72c56c35235ab
* Add utilities for adding highlighting markup to HTML and
highlighting spans to plain text (for Webview and UI,
respectively)
* Rename Snippet.java to TextUtilities.java and move to utility
package
Change-Id: Ic443ab5ce9c0199fa82a68e1592bf259494cadd2
To determine mime-types of attachments from the ACTION_SEND and _MULTIPLE intents,
- Use ContentResolver.getType() for content: URIs
- Use inferMimeType() for file: URIs
Tested with Gallary and Downloads.
Bug 3510624
Change-Id: Ibfa4b383463f157e18fd634e55f5be4b9adf6aa5
Slight API change to make it more clear what the method parameter is for.
Also add some additonal test conditions to the Rfc822Output tests.
Change-Id: I8888d6201e79136fa3420aa9d5f921772f374e56
There were two TODO's from a prior CL where deprecated HostAuth methods
were removed.
1. Do not use a generated URI to determine if account settings have changed.
Instead, use the HostAuth structure for this purpose.
2. The account key in the HostAuth structure has been deprecated. Remove as
much of it as possible (until the schema of the host auth database changes,
we must still refer to it when adding rows).
In the process, HostAuth tests were broken out into a separate unit test
file.
Change-Id: I4075da09af168f734db7b20a9ef63d4178ac2064
- Extracted the loader
- Extracted ViewType and introduced WidgetView.
WidgetView is ViewType + mutable fields, such as account id.
WidgetView now owns the method to switch views.
These two are basically in preparation to address the message count bug.
(we're showing total message count where it should be the unread count,
which is a bit tricky because it'll require two different queries.)
- Also simplified the threading model in EmailWidget to fix potential
theading issues. (now (almost) everything works on the UI thread)
Bug 3431240
Change-Id: I9f8a268210995f1135baabe88b49b274272708d4
* There are three pieces to this CL (sorry):
1) Move and/or rename some constants into emailcommon
2) Move Utility to emailcommon, moving the few UI
related utilities back into Email (FolderProperties
and UiUtilities)
3) Remove all references to resources from emailcommon
* The three pieces relate in that, between them, they allow
the emailcommon static library to compile cleanly
Bug: 3442973
Change-Id: Ic5e3abaa2a1b36999e0b6653c6c2134ea1bd544f
* No code was harmed, er, changed in the making of this CL
* All that's happened is that code that is needed by both Email and
Exchange have been moved into emailcommon
* This required import changes to many files, which explains the
length of the CL
Change-Id: I4e12455ba057a4a8054fdbd0b578c73afa411c8a
* Create AccountService.aidl and AccountServiceProxy in emailcommon
* Implement AccountService in email
* Use AccountServiceProxy in Exchange for account reconciliation,
notifications, etc.
* Move sync window constants into emailcommon
* Split attachment provider utilities and constants into emailcommon
Bug: 3442973
Change-Id: I89dce28b799b193243c07774dab65d830ae62775
Anthony Lee