* Enforce CalendarProvider2's requirements for valid Events
* Add unit tests for the new code
* Backport of change I42ad7acb from master
Bug: 2658149
Change-Id: I8151d035247a7dbb1fda3eae163b24ccfe055299
* IMAP/POP rely on sender to set mime type of attachments
* Which doesn't always work, because senders don't always provide it
* Remap using filename extensions, when needed
* This is applied as late as possible - in the MessageView, and in
the content provider getType(). No changes to how we write databases,
and no change to existing attachment rows.
Bug: 2356638
Change-Id: Ie69e3fd12f406aac803583f9d1299a8af4fba010
* It turns out that the UI uses selfAttendeeStatus and the attendee's status
from the Attendees table in confusing and undocumented ways
* selfAttendeeStatus is used in the UI, but only in certain cases. Generally speaking,
the Attendees table status is definitive. However, when the user sets his status
from the UI, this data is reflected in the event's selfAttendeeStatus, since for EAS,
the user is always the owner of his calendar
* On downsync, we'll put the user's busy status into the Attendees table
* On upsync, we'll send busy status based on the user's attendee status in the
Attendees table
* We'll use selfAttendeeStatus only to determine whether the user has manually changed
his status via the UI (as before)
Bug: 2615586
Change-Id: I3a82474cfd07cbf5aa595e5214807cb55005cefa
* Set selfAttendeeStatus on download from busy status
* Set busyStatus on upload from selfAttendeeStatus
Bug: 2587076
Change-Id: I34eaa0d3861bcec0cbfd51761b31965e44f5162b
* Meeting invitations in EAS include a globalObjId. It turns out
that this id is EITHER the actual uid (if Exchange created it)
or a wrapper for the actual uid (if some other client created it)
* To find out which case we're dealing with, we have to look at
the base64 decoded string for the magic "vCal-Uid" substring
* If it's there, we pull the real uid out of the decoded string
* Otherwise, we build a hex strong from the decoded bytes
* Write unit test for this process
Bug: 2598201
Change-Id: I1cc40af6d1e45be44c19465eb8a4c31851ec8157
I've attached a screenshot on the referenced bug.
Also fixed a bug in SyncManager.getDeviceId() where sDeviceId cache wasn't
working.
Bug 2591124
Change-Id: I4b58517c095a96d47fb57179d70091b2c7af5249
* Ignore the results of CAPA and always try TOP
* If TOP returns -ERR simply fall back to (bad old slow) RETR
* Unit tests for positive & failure cases
Bug: 2588432
Change-Id: Ife4b551217de1025e14efc46074f16ef4ae99c6f
* Write MIME-Version: 1.0 in all outbound messages, not just those
with multiparts. This is required by RFC 2045.
* Unit tests
Bug: 1678296
Change-Id: Icf37d93b8b0150f490791792499865a60744adea
It's a preliminary change for IMAP bug fixes.
Also,
- Fixed a potential bug in ImapFolder.setFlags where it'd throw
StringIndexOutOfBoundsException if flags is empty.
- Added a generic flag to proguard.flags so that now all methods with
the "ForTest" sufix are automatically preserved.
Turned out it wasn't needed for this CL, but it should come in handy
someday.
Bug 2538076
Change-Id: I49a08afc196c7b7f1f30477dfc38ac5381045d84
When receiving the EHLO response from the SMTP server, the multiline
answer has "-" prefix in all lines except the last line, where the
prefix is a blank. This is according to RFC 2821 section 4.2.1. This has
also been reported as issue 2309 at code.google.com.
Bug: 1744768
Change-Id: I3feccabed30767d2fa5b06352cd7d1c803e8d59c
* If the server asks for more than we can support, don't throw
and error from PolicySet creation. Let isSupported() do that.
* Overlong password lengths cannot be supported and isSupported is false.
* Overlong timeouts & max wipes can be reduced to supported
amount (this actually increases security) and isSupported is true.
* Clean up an obsolete comment
* Unit tests
Bug: 2567804
Change-Id: I2d664a7f2a315b9f9bdcb867fe2cd98f74de6f66
* Turns out that most other clients omit this.
* This has the pleasing effect of fixing the referenced bug
* Update unit tests
Bug: 2561821
Change-Id: I39f7db7e05be590373cd5f3d9b23c7ee21bde4f7
* Because we were sending these in the wrong format, upsynced changes
were failing, with the result that both the original event and
the "new" event (from the UNTIL date forward) remained in the calendar
* Fix is to send the proper format; unit test updated to reflect the
change
* Also, we only send the date of an UNTIL, rather than the to-the-minute
time; it turns out that EAS expects to see only a day for UNTIL.
Bug: 2561818
Change-Id: Ic4eacbe96c713d58c637386ceab2cf22ebe3c2d4
* We need to send date only (without time) in the VCALENDAR file for
all-day events
* Add unit test for this case
Bug: 2561789
Change-Id: I33a43c7a248059c97482ca147a23af083744118a
* We should be sending CANCEL as the method with cancellations
* Fix this and update unit test
Bug: 2527606
Change-Id: I2b982e4bfd1dbc57660cf578702edf49584d2957
A desktop shortcut to an account created on donut or before points at
com.android.email/.activity.FolderMessageList, which we've already removed.
- Added a dummy FolderMessageList to receive it and redirect to MessageList.
- Removed FolderMessageListUnitTests, which was left unremoved.
Bug 2535335
Change-Id: Ie5ffa158882633a4929c4c47a3d9625fd1626863
* Use one minute before/after for transition checking, instead of the
sloppier early version
* Add tests for additional known time zones
* Change most methods in CalendarUtilities to package private (for use
with unit tests)
* Clean up a little bad formatting
Change-Id: I9e5be5e1c859f2294adf06874459f7db15fb8c22
* EAS 2.5 doesn't like seeing bare LF's in Calendar location
and description, and Events including them won't sync back to
the server
* Create a utility to replace bare LF's with CRLF and write
unit test for the utility
* Fix the bug by using this utility
Bug: 2542220
Change-Id: I2c72d23f15e3a922ebe3585e063abe9fa9e2366f
* Fix the transition times so that they occur at the hour
* Remove an unused variable
* Fix a reference to Calendar.HOUR that should have been
Calendar.HOUR_OF_DAY
* Confirm that unit tests work properly
Change-Id: I3eaf31d160e97b5f3ba59c83878359085aea960d
* Sanity check runs through every TimeZone and makes sure that there
are no exceptions thrown
* Also, that we find at least 10x as many TimeZone's with RRULEs as
those without (empirical)
Change-Id: I2f266ac9d2a839f053bb5fda10a5b77dc8dd2c04
* We were sending cancellations with a request for reply, which is
incorrect
* Send the correct dats in the ics attachment
* Update unit test to reflect this
Bug: 2527606
Change-Id: I4cea0bb8f1c29a3cad8d09fd6a4750f7ab067229
* Add "vibrate when silent" choice in UI
* Add storage for it in Email's provider. Existing accounts default to
their current settings (always vibrate / never vibrate).
* Respect new mode when notifications are posted
* Updated existing unit tests
Bug: 2457183
Change-Id: I5c933ac39dbef8b2028255f330e0b084a445421a
* Yahoo! is not supporting search by UID so I can't identify the new
the UID after I upload. This inability to correlate the local and
remote messages means that we wind up syncing the same message back
down, in a loop, which spawns more messages.
* Yahoo! has partial support for UIDPLUS, and reports the new UID when
I append (upload) messages.
* Modify IMAP parser to parse response lists
* When APPENDUID is reported, use it (and skip the search)
* Modify the few other existing users of response lists to use the
parsed versions instead. Provided a couple of lightweight utilities
to make it easier to work with ImapList.
* Unit tests for most of it.
* Optimization: share a static date/time parser for all IMAP connections
Bug: 2448220
Change-Id: Ic10fc1a195ccf4671a498188cc8b17848c8d9df7
* Most clients send name= in the content-type, but a few clients
send only filename= in content-disposition.
* There was code to handle both cases, but due to two typos, it didn't
work.
* Most easily reproduced by sending from hotmail/live web client.
Bug: 2366961
Change-Id: I1d9a00b9b5fd1094cfb8566c3248d94286a8ae91
It's useful to debug MIME related problems.
- New MimeStreamParser.LOG_MESSAGE flag
- Cleaned up LoggingInputStream, which now supports all InputStream methods
(e.g. close, available, etc.) properly.
- LoggingInputStream now dumps non-printable ascii chars as '\xXX'.
Change-Id: I4391e125abd418defc1dc21e4f35cf6ef8448acb
* Turns out that Exchange 2003 requires the ics attachment to be in a
multipart/alternative, rather than a multipart/mixed MIME message
* Exchange 2007 accepts both types
* Therefore, we change our output for this particular situation, i.e.
a single attachment that is an ics file, to multipart/alternative
* Rename FLAG_SUPPRESS_CONTENT_DISPOSITION to FLAG_ICS_ALTERNATIVE_PART
and make this flag do double duty - 1) suppress the Content-Disposition
header (also required by Exchange) and 2) send the message as
multipart/alternative
* Add unit tests for Rfc822Output to check that mime parts are composed
properly
Bug: 2516394
Change-Id: I60e26f57b8ecaf01d0340e7828533334e0e7d45a
- Now SimpleIcsWriter does the UTF-8 conversion, and folds lines according
to the number of bytes in UTF-8.
- It now escapes special chars in TEXT values. You can safely put , ; \ or
line breaks. in summary, location, and description.
- Quotes all CN. (leftover from Ibb8f155a)
- Replace "s in CN with 's (rather than removing them)
Bug 2508283
Bug 2515768
Change-Id: Ibdced53ee32bba950608d63f507b11b24eaad7b0
* Add the (recurring) text when the invite is for a recurring
meeting
* Add a test for message text creation
Bug: 2515474
Change-Id: Ifefbc2ba1ac444175180cb7a58f4ec554d9674a3
* The utility wasn't handling commas properly, causing the referenced
bug
* Fixed the utility and updated the relevant test case
Bug: 2515488
Change-Id: Id229e50fcaaed1a0142db301eedaaba9209bed13
- In memory attachments are now stored as byte[], not String.
We can store any type of contents now.
- Added blob content_bytes to the Attachment table.
The content field is now deprecated and not used.
- Explicitly convert ICS files to UTF-8.
- Added Utility.to/fromUtf8().
Bug 2509287
Change-Id: I3785a365a9a34039ec12ba82bd857dcdbc4de92d
