* There are three pieces to this CL (sorry):
1) Move and/or rename some constants into emailcommon
2) Move Utility to emailcommon, moving the few UI
related utilities back into Email (FolderProperties
and UiUtilities)
3) Remove all references to resources from emailcommon
* The three pieces relate in that, between them, they allow
the emailcommon static library to compile cleanly
Bug: 3442973
Change-Id: Ic5e3abaa2a1b36999e0b6653c6c2134ea1bd544f
* Rework the interaction with the Account Manager
* Remove unneeded call to response.onRequestContinued()
* Store response in SetupData so it can survive the entire account
setup flow.
* Explicitly report exit status to acct mgr at known exit points:
* AccountSetupBasics.finish() (fail/cancel)
* AccountSetupOptions.finish() (fail/cancel)
* AccountSetupOptions.optionsComplete() (success)
Bug: 3335128
Change-Id: Ia55724eb1e938f2633c5ff7afb719a879be16a1b
* Allow, but provide warnings via EditText.setError()
* Remove one last instance of password trim()
Bug: 2981433
Change-Id: I406a4f8b8f27cc5ce90424a8cafe88a677e72f45
Signed-off-by: Andy Stadler <stadler@google.com>
Check value of ActivityManager.isRunningInTestHarness() before allowing force
account creation, instead of ActivityManager.isUserAMonkey().
Bug 3329873
Change-Id: I5028eef9caced2cacc9c187dfd746865939fdedd
* This was an early attempt at fragmentation
* But it turned out that no fragment was needed here - it is
not shared or reused in any way.
* Precursor to doing final layouts for the activity.
* Tested working:
Automatic provider lookup
Manual
POP/IMAP and EAS flow modes (from accounts & sync)
Force account creation intent
Provider note
Duplicate account detection
Change-Id: I434edd4b152391d36e70440873932db3ec1a1c99
* Add entry point via com.android.email.CREATE_ACCOUNT
* Enable when in monkey mode only
* Walks through setup screens as if auto-populated and as if
connection checking always succeeds.
* Refactored some common code in AccountSetupBasicsFragment
* Removed obsolete commentary about auto-population of EAS accts
* Also fix minor typo in FLOW_MODE_ACCOUNT_MANAGER_POP_IMAP
Bug: 2735784
Change-Id: Ie7363836cd267673e963e60ae8bc32cab422576e
* AccountSetupBasics now has an XL version
* This is from prelim wireframes
* Final colors, text size, and positioning all TBD
* Fixed a StrictMode violation (counting #accounts in onCreate)
* Lightweight (non-shippable) fixes for functional phone UX
Bug: 3188940
Change-Id: Idf6cb514208eba07eaa20b20abfd5fcc3dae1751
* new checkbox in debug fragment
* saved value in prefs so it's sticky
* each Activity calls a helper to enable/disable per that flag
Change-Id: I1af1ae9f401bc746cc97da00dfb0e06407b79d46
Current implementation ignores callbacks coming from
AccountManager, which should be called everytime
when this Activity finishes its job.
Bug: 3069222
Change-Id: Iea03cf94bdfe8da184e415bf7e759ddeb46ecdd9
* AccountCheckSettingsFragment now supports AutoDiscover
* Clean up callbacks for account check & autodiscover errors
* AccountSetupExchange now supports rotation
* Remove dead code in SetupData & AccountSetupBasics
TODO next CL: Remove all edit flows from setup activities
TODO next CL: Remove old CheckSettings activity
Change-Id: I3c9884856ca6e70226374fdb28400bfb3588387e
* Activities modified to use new check-settings fragment:
* AccountSetupBasics (auto-setup for imap/pop)
* AccountSetupIncoming
* AccountSetupOutgoing
Next CL: Same work for exchange, and terminate old CheckSettings activity.
Change-Id: If5c5bfe331161b2429f7d7a4bd13290932f03c47
* All setup activities given UI makeover:
* Remove legacy themes from manifest - exposes default holo theme
* Remove bottom row button(s)
* Replace with action bar button(s)
* No change to workflow or activity/fragment organization
Change-Id: I07ce11a0a2b4b767b5ac111d466e68400fe0f30b
* Add DebugFragment and incorporate it into AccountSettingsXL
* Tap "Email preferences" 10 times in a row to enable debug settings.
(Or type D E B U G works as well.)
* Point broadcast receiver (*#*#EMAIL#*#*) to AccountSettingsXL
* Remove old debug launchers in AccountFolderList
* Remove old Debug activity
Change-Id: Ib289c42878a07c23f815654ce4570c1399aa49de
- After adding an account, and when a shortcut to an account is clicked,
launch Welcome instead of MessageList.
- Then welcome launches the appropriate activity.
(MessageList or MessageListXL)
- Welcome no longer launches AccountFolderList, which will be gone
according to the current plan.
Always going through Welcome makes sure that the account backup/restore
and the reconciler will always get kicked.
Change-Id: Ia57027eba16e98c5d8854e8d3c1d8773bcfbf1e5
There are two major, interrelated parts to this CL:
1) Clean up the activities to reduce the use of Intents to pass
information between activities; instead, we use a common
SetupData structure that automatically saved/restored as necessary
during the setup flow. A fair amount of code and inconsistent
use of Bundle extras has been eliminated in the process.
* Create SetupData structure, setters/getters, and initialization
methods to simplify the preservation of state during setup flow
* Remove all state/flow extras from Intents; Intents now only
specify the Activity to be started, which should greatly simplify
the transition to Fragments.
* Remove all state/flow fields from Activities
* Modify existing setup activity unit tests and confirm tests pass
2) Create AccountManager accounts for POP/IMAP email accounts to
provide consistency in user experience. Also, internal flows are
now identical as between account types.
* Move account reconciliation from SyncManager to MailService, so
that reconciliation is consistent between email and exchange
accounts; move unit tests as appropriate
* Add a "Sync Email" setting for POP/IMAP/EAS
* Change MailService to respect the "Sync Email" setting in
Settings -> Accounts & sync
* Create PopImapSyncAdapterService to handle manual POP/IMAP sync as
requested by SyncManager; add EmailSyncAdapterService to perform
the same function for EAS
* Use new PopImapAuthenticatorService to add AccountManager accounts
for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest
and add related xml files
* Update AccountSettings to use SetupData
Miscellaneous other changes:
* Only allow valid port numbers in incoming/outgoing setup
Bug: 1712475
Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
Dial *#*#36245#*#* on the dialer to activate the debug screen.
"36245" = "email"
It's useful when
- There's no keyboard.
- There's no account set up yet.
(You can do it by entering the special username/password on new account
screen, but that's a bit of a pain.)
It's also easier to tell to people.
Also, removed "sensitive logging", which should never be used.
Change-Id: Id692f8b216f2d85abe1880c452d2067f170dac83
* To avoid having to use a mock deviceId with FolderSync in validation, we now
simply use the real deviceId with the correct SyncKey ("0" for a new account,
or the actual sync key if the account already exists)
* Rework utility code that finds existing accounts
* Write unit test for findExistingAccount
Bug: 2589243
Change-Id: Ia532b2e209aec3aa01ca06617b4da78c3d986b32
* Track whether the user clicked "manual" vs. clicking next (and falling
into "manual" because the account is not found in the providers list.
Convert this into an "allowAutoDiscover" parameter.
* Pass "allowAutoDiscover" down into AccountSetupAccountType and through
into AccountSetupExchange. (Note, it's unused/ignored for POP & IMAP
accounts and should not affect them.)
* In AccountSetupExchange, use the existing EXTRA_DISABLE_AUTO_DISCOVER
(previously only for testing) to suppress autodiscover in manual mode.
Bug: 2570919
Change-Id: I2583e00d1e6cc26bbd4b85134eddae8cc3a1f91e
* Prune all folders, messages & attachments that won't migrate
* Clean up SSL/TLS values for better connection results & security
* Move account setup lookup code to AccountSettingsUtils to share it
* Cleanup config/auto-rotation settings to prevent relaunch of
auto-discover or account check (from exchange).
* A couple of other very small fixes
Bug: 2065528
* scrub all external strings to keep them compliant for IMAP protocol
* move Build.MODEL to x-android-device-model
* send x-android-mobile-net-operator
* send AGUID
* unit tests for above
* retrieve providers from VendorPolicyLoader
Bug: 2332183
- Dynamically switch to the alternate exchange strings to substitute overlays.
- Added the mechanism to load the "vendor policy", which tells you when the
alternate strings should be used.
Bug: 2382710
* Workaround for (HTC bug 2275383) & (Moto bug 2226582)
* Adds checkpoints for backing up and restoring accounts
* Uses legacy Account / prefs to back up accounts - this is because
some of this code will be reused for legacy account migration
* Unit tests of Account & LegacyConversions
* Unit tests of backup & restore
* Not done: testing of EAS/Account Manager interface (this will require
deeper dependency injection, to avoid the embedded calls to the Account
Manager and other system services.)
* Autodiscover allows complete configuration using only email address
and password
* Code handles the two standard autodiscover addresses and redirect
* Autodiscover process starts when the user chooses "Exchange" as the
account type. If the account is created via the AccountManager,
autodiscover begins upon tapping "Next" for the first time
* If autodiscover fails due to anything other than auth failure for
autodiscover-capable servers, the user is placed into the standard manual
configuration screen
Bug: 2366019
Change-Id: I936712b924833d9a133e8da04e11c3ba45d92f92
* The existing flow is badly broken; every "back" causes the user
to leave the setup flow and therefore have to start from scratch.
This is a very bad user experience, as previously entered data is
lost and must be re-entered.
* The fix corrects these problems, allowing the user to back up
through screens UNTIL the account is successfully created.
* After account creation, the user is returned to the proper screen,
depending on whether we're in "eas flow mode" or not
Bug: 2337511
Change-Id: Ie25ac73dfcd8a1dca36e1b31c75ffb22359840d1
* Improve appearance of basics screen and use simplified text
* Provide alternate text when in EAS account setup flow (from acct mgr)
* Change "Exchange/ActiveSync" button to "Exchange account"
* Add some spacing to the three buttons, to improve appearance
Bugs addressed:
2128055 Change string in account picker activity to Exchange
2132713 Welcome message for Email app is inappropriate when coming from
Settings -> Accounts & sync -> New account
* Check for existing accounts with matching servername + username
* Show a dialog and block account creation
* Triggers in three cases:
* After input of an auto-setup account (e.g. Gmail or AOL)
* After input of manual setup (incoming) parameters
* After changing incoming parameters of *any* existing account
* Made some notes in EmailContent regarding fields in HostAuth that we
are not actually using.
* Added HostAuth unit tests
Primarily fixes bug # 1964449
Bonus fix for bug # 1594408
Change-Id: I49310faf6654280582e0ab3d3e40f2701bfcd21d
* Create a new entry point for the exchange setup flow and switch
EASAuthenticatorService to call it
* Pass "eas flow mode" down through the setup screens
* Slightly modify their behavior as we go (e.g. we skip the
(account type" screen since we know it's EAS.)
* Add a checkbox to "sync contacts from this account" and pass that
value into ExchangeStore when we set up the account.
* Change the flow exit to pop back to the account manager instead of
taking the user to the new inbox.
This CL satisfies cases 1 & 2 of bug # 1974752.
* When we get a network connect broadcast, clear error states so sync can
restart for any boxes in an error state
* Add temporary notification code for the testers
* Add file-based debug logger
* Add Exchange logging to debug screen (adds additional exchange debugging)
* Add Exchange sd card logging to debug screen (logs to sd card)
* Change setLogging service API to send an int rather than a boolean
* Make sure push mailboxes are set up again when account changes to push
* Make sure push mailboxes are set up again when account mailbox starts
* (Fixed contacts sync bug found during debugging these changes)
* Numerous classes modified to deal with this change
* Fixes bugs 1993292 and 1994671
* Renamed various setter and getter methods to reflect the underlying
field names
* Renamed syncFrequency to syncInterval in Account and Mailbox
* Convenience method added to AccountSettings to save only user settings
* Calls to content.update(context, content.toContentValues()), which save
all fields, should be double-checked for correctness, making sure that
content has current data and will not conflict with other threads that
might modify that data
* Ran all unit tests to confirm proper function
NOTE: The logic to enforce single default account no longer works,
because that logic is in Account.save() and does not run via
Account.update(). I have patched out a small section of the relevant unit
test and will file a bug to come back for this fix.
* Remove all references to Account.mIsDefault, which was not the right
way to find the default account (it is lazy initialized)
* Change Account.getDefaultAccount to getDefaultAccountId, which is more
efficient and suitable in most uses.
* Wrote unit tests for provider default account handling
This should resolve bug 1983390 as well as a few other issues with default
account management.
* Generate compatibility UUID early enough to stick, so our localstore
db's are created correctly and not recreated over and over again.
* Compose menu items working
* Fix single-account mode (go straight to inbox)
* Lightweight Account projections where possible
* Properly show/hide default account checkbox (during new acct screens)
What works:
* All unit tests
* Editing existing accounts
* Create new accounts
* Checking account settings against server
* Mail sync using accounts
* Viewing mailboxes
* Viewing messages
* Composing messages
What breaks (in approx order of planned fixes)
* Some details of account editing
* Import of existing accounts
What works:
* Editing existing accounts
* Create new accounts
* Checking account settings against server
What breaks (in approx order of planned fixes)
* Some details of account editing
* Viewing mailboxes & messages
* Mail sync using accounts
* Import of existing accounts
errors, inconsistencies in passing Application/Activity/Context, and
some error handling cleanups. These are all changes that would have
probably been made before the original submits, but I didn't want
to fix them in the integration step.
Original author: stadler
Automated import of CL 144522
Todd Kennedy