replicant-packages_apps_Email/res/values/strings.xml

1099 lines
71 KiB
XML
Raw Normal View History

<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2008 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Deprecated strings - Move the identifiers to this section, mark as DO NOT TRANSLATE,
and remove the actual text. These will be removed in a bulk operation. -->
<skip />
<!-- Do Not Translate. Unused string. -->
<string name="read_unread_action"/>
<!-- Do Not Translate. Unused string. -->
<string name="favorite_action"/>
<!-- Do Not Translate. Unused string. -->
<string name="deselect_all_action"/>
<!-- Do Not Translate. Unused string. -->
<string name="remove_account_action"/>
<!-- Do Not Translate. Unused string. -->
<string name="folders_action"/>
<!-- Do Not Translate. Unused string. -->
<string name="accounts_action"/>
<!-- Do Not Translate. Unused string. -->
<string name="mark_as_read_action"/>
<!-- Do Not Translate. Unused string. -->
<string name="add_attachment_action"/>
<!-- Do Not Translate. Unused string. -->
<string name="notification_new_title"/>
<!-- Do Not Translate. Unused string. -->
<string name="debug_enable_sensitive_logging_label"/>
<!-- Do Not Translate. Unused string. -->
<string name="account_folder_list_separator_accounts"/>
<!-- Do Not Translate. Unused string. -->
<string name="account_folder_list_refresh_toast"/>
<!-- Do Not Translate. Unused string. -->
<string name="mailbox_list_title"/>
<!-- Do Not Translate. Unused string. -->
<string name="gal_completed_limited_fmt"/>
<!-- Do Not Translate. Unused string. -->
<string name="open_action"/>
<!-- Do Not Translate. Unused string. -->
<string name="dump_settings_action"/>
<!-- End of deprecated strings. -->
<skip />
<!-- Permissions label for reading attachments -->
<string name="permission_read_attachment_label">Read Email attachments</string>
<!-- Permissions description for reading attachments -->
<string name="permission_read_attachment_desc">Allows this application to read your Email
attachments.</string>
<!-- Permissions label for accessing the main provider -->
<string name="permission_access_provider_label">Access Email provider data</string>
<!-- Permissions description for accessing the main provider -->
<string name="permission_access_provider_desc">Allows this application to access your Email
database, including received messages, sent messages, user names and passwords.</string>
<!-- Name of application on Home screen -->
<string name="app_name">Email</string>
<!-- Title of compose screen -->
<string name="compose_title">Compose</string>
<!-- Title of debug screen -->
<string name="debug_title">Debug</string>
<!-- Actions will be used as buttons and in menu items -->
<skip />
<!-- Button name used as part of a multi-step process -->
<string name="next_action">Next</string>
<!-- Button name used to confirm acceptance of dialog boxes, warnings, errors, etc. -->
<string name="okay_action">OK</string>
<!-- Button name used to cancel out of dialog boxes -->
<string name="cancel_action">Cancel</string>
<!-- Button name used to move to previous step during setup sequence [CHAR_LIMIT=16] -->
<string name="previous_action">Previous</string>
<!-- Menu item/button name -->
<string name="send_action">Send</string>
<!-- Menu item/button name -->
<string name="reply_action">Reply</string>
<!-- Menu item/button name -->
<string name="reply_all_action">Reply all</string>
<!-- Menu item/button name -->
<string name="delete_action">Delete</string>
<!-- Menu item/button name -->
<string name="forward_action">Forward</string>
<!-- Button name used to complete a multi-step process -->
<string name="done_action">Done</string>
<!-- Menu item/button name -->
<string name="discard_action">Discard</string>
<!-- Menu item/button name [CHAR_LIMIT=16] -->
<string name="save_draft_action">Save draft</string>
<!-- Menu item/button name -->
<string name="read_action">Mark read</string>
<!-- Menu item/button name -->
<string name="unread_action">Mark unread</string>
<!-- Menu item/button name -->
<string name="set_star_action">Add star</string>
<!-- Menu item/button name -->
<string name="remove_star_action">Remove star</string>
<!-- Menu item -->
<string name="refresh_action">Refresh</string>
<!-- Menu item -->
<string name="add_account_action">Add account</string>
<!-- Menu item -->
<string name="compose_action">Compose</string>
<!-- Menu item/button name -->
<string name="search_action">Search</string>
<!-- Menu item -->
<string name="account_settings_action">Account settings</string>
<!-- Menu item -->
<string name="mark_as_unread_action">Mark as unread</string>
<!-- Menu item for moving messages to folders [CHAR LIMIT=10] -->
<string name="move_action">Move</string>
<!-- Menu item / button label for adding CC/BCC fields on message compose. [CHAR LIMIT=16] -->
<string name="add_cc_bcc_action">+ Cc/Bcc</string>
<!-- Generic button [CHAR LIMIT=16] -->
<string name="close_action">Close</string>
<!-- Command shown on Outbox to send all pending messages [CHAR LIMIT=20] -->
<string name="message_list_send_pending_messages_action">Send all messages</string>
<!-- Appears in choose attachment dialog title -->
<string name="choose_attachment_dialog_title">Choose attachment</string>
<!-- Dialog title to select a mailbox to which the user moves messages [CHAR LIMIT=20] -->
<string name="move_to_folder_dialog_title">Move to</string>
<!-- Appears in message list view while messages are being loaded [CHAR LIMIT=260dip] -->
<string name="status_loading_messages">Loading messages\u2026</string>
<!-- Appears in message list view when there's a network error. -->
<!-- Also appears in a toast, in the message viewer, when there's a network error. -->
<string name="status_network_error">Connection error</string>
<!-- Dialog text when we are unable to load the message for display -->
<string name="error_loading_message_body">Unexpected error while loading message text. Message
may be too large to view.</string>
<!-- Text shown with dragged messages to indicate how many are being dragged [CHAR LIMIT=40]-->
<plurals name="move_messages">
<item quantity="one">Move message</item>
<item quantity="other">Move messages</item>
</plurals>
<!-- Toast shown when a message(s) can't be moved because it's not supported by the POP3
protocol. [CHAR LIMIT=none]-->
<string name="cannot_move_protocol_not_supported_toast">Move is not supported on POP3 accounts.
</string>
<!-- Toast shown when messages can't be moved because the selection contains multiple accounts'
messages. [CHAR LIMIT=none]-->
<string name="cannot_move_multiple_accounts_toast">Cannot move. Selection contains multiple
accounts.</string>
<!-- Toast shown when messages can't be moved because they're in a special mailbox. "Drafts",
"Outbox" and "Sent". [CHAR LIMIT=none]-->
<string name="cannot_move_special_mailboxes_toast">Messages in Drafts, Outbox and Sent cannot be
moved.</string>
<!-- Notification message in notifications window when one account has
one or more new messages; e.g, "279 unread (someone@google.com)". -->
<plurals name="notification_new_one_account_fmt">
<!-- Case of one new message. -->
<item quantity="one"><xliff:g id="unread_message_count" example="1">%1$d</xliff:g> unread (<xliff:g id="account">%2$s</xliff:g>)</item>
<!-- Case of "few" (small number of) new messages. -->
<item quantity="few"><xliff:g id="unread_message_count" example="2">%1$d</xliff:g> unread (<xliff:g id="account">%2$s</xliff:g>)</item>
<!-- Case of a plural number of new messages. -->
<item quantity="other"><xliff:g id="unread_message_count" example="279">%1$d</xliff:g> unread (<xliff:g id="account">%2$s</xliff:g>)</item>
</plurals>
<!-- Notification message in notifications window when 2+ accounts have new mail; e.g, "in 3 accounts". -->
<plurals name="notification_new_multi_account_fmt">
<!-- Case of "few" (small number of) accounts with unread messages. -->
<item quantity="few">in <xliff:g id="number_accounts" example="2">%d</xliff:g> accounts</item>
<!-- Case of plural number of accounts with unread messages. -->
<item quantity="other">in <xliff:g id="number_accounts" example="10">%d</xliff:g> accounts</item>
</plurals>
<!-- String to indicate which account received a new message. [CHAR LIMIT=none] -->
<string name="notification_to_account">to <xliff:g id="receiver_name"
example="Main">%1$s</xliff:g></string>
<!-- Name given to "all accounts" in the account picker for shortcuts and widget [CHAR LIMIT=20] -->
<string name="account_name_display_all">All Accounts</string>
<!-- The number of accounts configured. [CHAR LIMIT=16] -->
<plurals name="number_of_accounts">
<item quantity="one"><xliff:g id="num_accounts" example="1">%1$d</xliff:g> account</item>
<item quantity="other"><xliff:g id="num_accounts" example="2">%1$d</xliff:g> accounts</item>
</plurals>
<!-- The next set of strings are used server-side and must not be localized. -->
<!-- Do Not Translate. This is the name of the "inbox" folder, on the server. -->
<string name="mailbox_name_server_inbox" translatable="false">Inbox</string>
<!-- Do Not Translate. This is the name of the "outbox" folder, on the server. -->
<string name="mailbox_name_server_outbox" translatable="false">Outbox</string>
<!-- Do Not Translate. This is the name of the "drafts" folder, on the server. -->
<string name="mailbox_name_server_drafts" translatable="false">Drafts</string>
<!-- Do Not Translate. This is the name of the "trash" folder, on the server. -->
<string name="mailbox_name_server_trash" translatable="false">Trash</string>
<!-- Do Not Translate. This is the name of the "sent" folder, on the server. -->
<string name="mailbox_name_server_sent" translatable="false">Sent</string>
<!-- Do Not Translate. This is the name of the "junk" folder, on the server. -->
<string name="mailbox_name_server_junk" translatable="false">Junk</string>
<!-- The next set of strings are used in local display and may be localized. -->
<!-- In the UI, the inbox will be displayed with this name -->
<string name="mailbox_name_display_inbox">Inbox</string>
<!-- In the UI, the outbox will be displayed with this name -->
<string name="mailbox_name_display_outbox">Outbox</string>
<!-- In the UI, the drafts will be displayed with this name -->
<string name="mailbox_name_display_drafts">Drafts</string>
<!-- In the UI, the trash will be displayed with this name -->
<string name="mailbox_name_display_trash">Trash</string>
<!-- In the UI, the sent will be displayed with this name -->
<string name="mailbox_name_display_sent">Sent</string>
<!-- In the UI, the junk will be displayed with this name -->
<string name="mailbox_name_display_junk">Junk</string>
<!-- In the UI, the unread will be displayed with this name [CHAR LIMIT=15] -->
<string name="mailbox_name_display_unread">Unread</string>
<!-- In the shortcut/widget configuration UI, the label for selecting only the unread messages in an account's inbox [CHAR LIMIT=30] -->
<string name="picker_mailbox_name_all_unread">Inbox (unread)</string>
<!-- In the shortcut/widget configuration UI, the label for selecting all messages in an account's inbox [CHAR LIMIT=30] -->
<string name="picker_mailbox_name_all_inbox">Inbox (all)</string>
<!-- Version number, shown only on debug screen -->
<string name="debug_version_fmt">Version: <xliff:g id="version">%s</xliff:g></string>
<!-- Do Not Translate. Checkbox label, shown only on debug screen -->
<string name="debug_enable_debug_logging_label" translatable="false">
Enable extra debug logging?</string>
<!-- Do Not Translate. Checkbox label, shown only on debug screen -->
<string name="debug_enable_exchange_logging_label" translatable="false">
Enable exchange parser logging? (Extremely verbose)</string>
<!-- Do Not Translate. Checkbox label, shown only on debug screen -->
<string name="debug_enable_exchange_file_logging_label" translatable="false">
Enable exchange sd card logging?</string>
<!-- Do Not Translate. Button label, shown only on debug screen -->
<string name="debug_clear_webview_cache" translatable="false">
Clear WebView cache</string>
<!-- Do Not Translate. Checkbox label, shown on debug screen. -->
<string name="debug_disable_graphics_acceleration_label" translatable="false">
Disable hardware graphics acceleration</string>
<!-- Do Not Translate. Checkbox label, shown on debug screen. -->
<string name="debug_force_one_minute_refresh_label" translatable="false">
Force 1-minute refresh for POP/IMAP</string>
<!-- Do Not Translate. Checkbox label, shown on debug screen. -->
<string name="debug_enable_strict_mode_label" translatable="false">
Enable strict mode (with logging)</string>
<!-- The summary section entry in the AccountFolder list to display all inboxes -->
<string name="account_folder_list_summary_inbox">Inbox</string>
<!-- The summary section entry in the AccountFolder list to display all starred
[CHAR LIMIT=200dip] -->
<string name="account_folder_list_summary_starred">Starred</string>
<!-- The summary section entry in the AccountFolder list to display all drafts
[CHAR LIMIT=200dip] -->
<string name="account_folder_list_summary_drafts">Drafts</string>
<!-- The summary section entry in the AccountFolder list to display all outboxes
[CHAR LIMIT=200dip] -->
<string name="account_folder_list_summary_outbox">Outbox</string>
<!-- Label shown in the account selector to select "Combined view", which contains
Combined Inbox, Combined Outbox, etc. [CHAR LIMIT=30] -->
<string name="mailbox_list_account_selector_combined_view">Combined view</string>
<!-- Appears at the bottom of list of messages; user selects to load more messages from that folder. -->
<string name="message_list_load_more_messages_action">Load more messages</string>
<!-- The number of messages that are currently selected for various operations such as
"delete message(s)" [CHAR LIMIT=32] -->
<plurals name="message_view_selected_message_count">
<item quantity="one" ><xliff:g id="message_count" example="1">%d</xliff:g> selected</item>
<item quantity="other"><xliff:g id="message_count" example="9">%d</xliff:g> selected</item>
</plurals>
<!-- Message to show when there are no messages (emails) in the selected mailbox.
[CHAR LIMIT=26] -->
<string name="message_list_no_messages">No messages</string>
<!-- Hint text in To field -->
<string name="message_compose_to_hint">To</string>
<!-- Hint text in Cc field -->
<string name="message_compose_cc_hint">Cc</string>
<!-- Hint text in Bcc field -->
<string name="message_compose_bcc_hint">Bcc</string>
<!-- Hint text in Subject field -->
<string name="message_compose_subject_hint">Subject</string>
<!-- Label for From field [CHAR LIMIT=12] -->
<string name="message_compose_from_label">From:</string>
<!-- Label for To field [CHAR LIMIT=12] -->
<string name="message_compose_to_label">To:</string>
<!-- Label for Cc field [CHAR LIMIT=12] -->
<string name="message_compose_cc_label">Cc:</string>
<!-- Label for Bcc field [CHAR LIMIT=12] -->
<string name="message_compose_bcc_label">Bcc:</string>
<!-- Label for Subject field [CHAR LIMIT=12] -->
<string name="message_compose_subject_label">Subject:</string>
<!-- Hint text in Message composer body field -->
<string name="message_compose_body_hint">Compose Mail</string>
<!-- Header for forwarded original messages -->
<string name="message_compose_fwd_header_fmt">\n\n-------- Original Message --------\nSubject: <xliff:g id="subject">%1$s</xliff:g>\nFrom: <xliff:g id="sender">%2$s</xliff:g>\nTo: <xliff:g id="to">%3$s</xliff:g>\nCC: <xliff:g id="cc">%4$s</xliff:g>\n\n</string>
<!-- Header for replied-to messages -->
<string name="message_compose_reply_header_fmt">\n\n<xliff:g id="sender">%s</xliff:g> wrote:\n\n</string>
<!-- Heading that appears before forwarded text -->
<string name="message_compose_quoted_text_label">Quoted text</string>
<!-- Label of checkbox to include original message in a forwarded/replied message
[CHAR_LIMIT=32] -->
<string name="message_compose_include_quoted_text_checkbox_label">Include text</string>
<!-- Toast that appears if you try to send with no recipients. -->
<string name="message_compose_error_no_recipients">You must add at least one recipient.</string>
<!-- An address field contains invalid email addresses. -->
<string name="message_compose_error_invalid_email">Some email addresses are invalid.</string>
<!-- Toast that appears when an attachment is too big to send. -->
<string name="message_compose_attachment_size">File too large to attach.</string>
<!-- Display name for composed message, indicating the destination of the message.
e.g. "John and 2 others" -->
<string name="message_compose_display_name"><xliff:g id="name" example="John">%1$s</xliff:g> and <xliff:g id="number" example="27">%2$d</xliff:g> others</string>
<!-- Label for To field in read message view -->
<string name="message_view_to_label">To:</string>
<!-- Label for CC field in read message view -->
<string name="message_view_cc_label">Cc:</string>
<string name="message_view_bcc_label">Bcc:</string>
<!-- Label for the date field. [CHAR LIMIT=20]-->
<string name="message_view_date_label">Date:</string>
<!-- Label for the from field. [CHAR LIMIT=20]-->
<string name="message_view_from_label">From:</string>
<!-- Label for the subject field. [CHAR LIMIT=20]-->
<string name="message_view_subject_label">Subject:</string>
<!-- Button name to view an attachment [CHAR LIMIT=10]-->
<string name="message_view_attachment_view_action">View</string>
<!-- Button name to install an .apk attachment [CHAR LIMIT=10]-->
<string name="message_view_attachment_install_action">Install</string>
<!-- Button name to play a media (i.e. audio/video) attachment [CHAR LIMIT=10]-->
<string name="message_view_attachment_play_action">Play</string>
<!-- Button name, to load an attachment from the mail server [CHAR LIMIT=10]-->
<string name="message_view_attachment_load_action">Load</string>
<!-- Button name, to show info about an attachment from the mail server [CHAR LIMIT=10]-->
<string name="message_view_attachment_info_action">Info</string>
<!-- Button name, to save the attachment to SD card [CHAR LIMIT=10]-->
<string name="message_view_attachment_save_action">Save</string>
<!-- Disabled button text to indicate an attachment has been saved [CHAR LIMIT=10] -->
<string name="message_view_attachment_saved">Saved</string>
<!-- Button name, to cancel a queued attachment download [CHAR LIMIT=10]-->
<string name="message_view_attachment_cancel_action">Stop</string>
<!-- Toast after saving attachment [CHAR LIMIT=30] -->
<string name="message_view_status_attachment_saved">Attachment saved
as <xliff:g id="filename">%s</xliff:g>.</string>
<!-- Toast after attachment could not be saved [CHAR LIMIT=30] -->
<string name="message_view_status_attachment_not_saved">Unable to
save attachment.</string>
<!-- Toast upon using "send" when one or more attachments will need to be background loaded
[CHAR LIMIT=none]-->
<string name="message_view_attachment_background_load">Note: One or more attachments in your
forwarded message will be downloaded prior to sending.</string>
<!--Button on the message view screen to show the message content [CHAR LIMIT=16] -->
<string name="message_view_show_message_action">Message</string>
<!--Button on the message view screen to show the calendar invite [CHAR LIMIT=16] -->
<string name="message_view_show_invite_action">Invite</string>
<!--Button on the message view screen to show the attachments [CHAR LIMIT=16] -->
<plurals name="message_view_show_attachments_action">
<item quantity="one">Attachment <xliff:g id="num_attachment" example="1" >%1$d</xliff:g>
</item>
<item quantity="other">Attachments <xliff:g id="num_attachment" example="3" >%1$d</xliff:g>
</item>
</plurals>
<!--Button on the message view screen to show the embedded pictures [CHAR LIMIT=16] -->
<string name="message_view_show_pictures_action">Show pictures</string>
<!-- Calendar invitation, label of the button to open in calendar [CHAR LIMIT=24] -->
<string name="message_view_invite_view">View in Calendar</string>
<!-- String shown with a calendar invitation. -->
<string name="message_view_invite_title">Calendar Invite</string>
<!-- String shown with a calendar invitation. -->
<string name="message_view_invite_text">Going?</string>
<!-- Button text: Calendar invitation: Accept. The leading space is used for spacing -->
<string name="message_view_invite_accept">" Yes"</string>
<!-- Button text: Calendar invitation: Maybe. The leading space is used for spacing -->
<string name="message_view_invite_maybe">" Maybe"</string>
<!-- Button text: Calendar invitation: Decline. The leading space is used for spacing -->
<string name="message_view_invite_decline">" No"</string>
<!-- Toast shown following a meeting invite reply, accepted -->
<string name="message_view_invite_toast_yes">You have accepted this invitation</string>
<!-- Toast shown following a meeting invite reply, maybe -->
<string name="message_view_invite_toast_maybe">
You have replied \"maybe\" to this invitation</string>
<!-- Toast shown following a meeting invite reply, declined -->
<string name="message_view_invite_toast_no">You have declined this invitation</string>
<!--Confirmation dialog title shown when user tries to delete messages. [CHAR LIMIT=16] -->
<!-- Link label to show to/cc/bcc of the curent message [CHAR LIMIT=32] -->
<string name="message_view_show_details">Show details</string>
<!-- Title of the dialog box to show to/cc/bcc of the message. [CHAR LIMIT=32] -->
<string name="message_view_message_details_dialog_title">Message Details</string>
<!-- Title for most attachment info dialogs [CHAR LIMIT=32] -->
<string name="attachment_info_dialog_default_title">Attachment info</string>
<!-- Title when Wi-Fi settings prevent attachments from downloading [CHAR LIMIT=32] -->
<string name="attachment_info_dialog_wifi_title">Wi-Fi connection required</string>
<!-- Text of button to launch the Wi-Fi settings activity [CHAR LIMIT=24] -->
<string name="attachment_info_wifi_settings">Wi-Fi settings</string>
<!-- Text of button to launch the application settings activity [CHAR LIMIT=24] -->
<string name="attachment_info_application_settings">Application settings</string>
<!-- Message body when we don't know exactly why an attachment can't be shown -->
<string name="attachment_info_unknown">Can\'t open attachment.</string>
<!-- Message body when the attachment is suspected of being malware -->
<string name="attachment_info_malware">
Because this type of attachment may contain malicious software,
you can\'t save or open it.</string>
<!-- Message body when the attachment can't be loaded due to security policy restrictions -->
<string name="attachment_info_policy">
This attachment can\'t be saved or opened due to the security policies
in force for this account.</string>
<!-- Message body when the attachment can only be downloaded over Wi-Fi -->
<string name="attachment_info_wifi_only">
This attachment is too large to download over a mobile network.
You can download it the next time you connect to a Wi-Fi network.</string>
<!-- Message body when no activities can open the attachment -->
<string name="attachment_info_no_intent">
There is no installed application that can open this attachment.
Try downloading an appropriate application from Android Market.</string>
<!-- Message body when the attachment is an application, but, side loading is disabled -->
<string name="attachment_info_sideload_disabled">
This attachment is an application. You must check "Unknown sources"
in Settings, under Applications, before you can install it.</string>
<!-- Message body when the attachment is an application, and side loading is enabled -->
<string name="attachment_info_apk_install_disabled">
Applications can\'t be installed directly from Email. First save
this application and then install it using the Downloads application.</string>
<!-- Error banner when an attachment could not be downloaded due to a problem at the server
[CHAR LIMIT=100] -->
<string name="attachment_not_found">The attachment could not be downloaded.</string>
<!-- String used in place of a message that could not be properly decoded (e.g. bad base64
data was received.) [CHAR LIMIT=none] -->
<string name="message_decode_error">Error while decoding message.</string>
<!-- Title of the EML viewer activity. [CHAR LIMIT=32] -->
<string name="eml_view_title">Viewing
<xliff:g id="filename" example="test.eml">%s</xliff:g></string>
<string name="message_delete_dialog_title">Discard message</string>
<!--Confirmation dialog text shown when user tries to delete messages. [CHAR LIMIT=32] -->
<plurals name="message_delete_confirm">
<item quantity="one">Discard this message?</item>
<item quantity="other">Discard these messages?</item>
</plurals>
<!-- Toast shown briefly while deleting a message -->
<plurals name="message_deleted_toast">
<item quantity="one">Message deleted.</item>
<item quantity="other">Messages deleted.</item>
</plurals>
<!-- Toast shown briefly while deleting an unsent (draft) message -->
<string name="message_discarded_toast">Message discarded.</string>
<!-- Toast shown briefly while saving a draft -->
<string name="message_saved_toast">Message saved as draft.</string>
<!-- String that is displayed when the attachment could not be displayed. -->
<string name="message_view_display_attachment_toast">This attachment cannot be
displayed.</string>
<!-- String that is displayed when the attachment could not be loaded.[CHAR LIMIT=none] -->
<string name="message_view_load_attachment_failed_toast">The attachment \"
<xliff:g id="filename">%s</xliff:g>\" could not be loaded.</string>
<!-- String that is displayed when a long message is being parsed. [CHAR LIMIT=none] -->
<string name="message_view_parse_message_toast">Opening message\u2026</string>
<!-- Toast shown after moving a message to a different mailbox. [CHAR LIMIT=none]-->
<plurals name="message_moved_toast">
<item quantity="one" ><xliff:g id="num_message" example="1" >%1$d</xliff:g>
message moved to <xliff:g id="mailbox_name" example="Inbox" >%2$s</xliff:g></item>
<item quantity="other" ><xliff:g id="num_message" example="5" >%1$d</xliff:g>
messages moved to <xliff:g id="mailbox_name" example="Inbox" >%2$s</xliff:g></item>
</plurals>
<!-- Notification ticker when a forwarded attachment couldn't be sent [CHAR LIMIT=none] -->
<string name="forward_download_failed_ticker">Could not forward one or more attachments</string>
<!-- Notification title when a forwarded attachment couldn't be sent [CHAR LIMIT=30]-->
<string name="forward_download_failed_title">Attachment not forwarded</string>
<!-- Notification ticker when email account authentication fails [CHAR LIMIT=none] -->
<string name="login_failed_ticker">
<xliff:g id="account_name">%s</xliff:g> sign-in failed</string>
<!-- Notification title when email account authentication fails [CHAR LIMIT=30]-->
<string name="login_failed_title">Sign-in failed</string>
<!-- Size unit for bytes for attachments [CHAR LIMIT=10] -->
<plurals name="message_view_attachment_bytes">
<item quantity="one" ><xliff:g id="size_in_bytes" example="1" >%d</xliff:g>B</item>
<item quantity="other"><xliff:g id="size_in_bytes" example="279">%d</xliff:g>B</item>
</plurals>
<!-- Size unit for kilo bytes for attachments [CHAR LIMIT=10] -->
<plurals name="message_view_attachment_kilobytes">
<item quantity="one" ><xliff:g id="size_in_kilobytes" example="1" >%d</xliff:g>KB</item>
<item quantity="other"><xliff:g id="size_in_kilobytes" example="279">%d</xliff:g>KB</item>
</plurals>
<!-- Size unit for mega bytes for attachments [CHAR LIMIT=10] -->
<plurals name="message_view_attachment_megabytes">
<item quantity="one" ><xliff:g id="size_in_megabytes" example="1" >%d</xliff:g>MB</item>
<item quantity="other"><xliff:g id="size_in_megabytes" example="279">%d</xliff:g>MB</item>
</plurals>
<!-- Size unit for giga bytes for attachments [CHAR LIMIT=10] -->
<plurals name="message_view_attachment_gigabytes">
<item quantity="one" ><xliff:g id="size_in_gigabytes" example="1" >%d</xliff:g>GB</item>
<item quantity="other"><xliff:g id="size_in_gigabytes" example="279">%d</xliff:g>GB</item>
</plurals>
<!-- The label of the next button on the message view screen. -->
<string name="message_view_move_to_newer">Newer</string>
<!-- The label of the previous button on the message view screen. -->
<string name="message_view_move_to_older">Older</string>
<!-- A simple divider between subject and message snippet in the message list view
[CHAR LIMIT=4]-->
<string name="message_list_subject_snippet_divider">\u0020\u2014\u0020</string>
<!-- Title of screen when setting up new email account [CHAR LIMIT=45] -->
<string name="account_setup_basics_title">Account setup</string>
<!-- Title of the screen when adding exchange account [CHAR LIMIT=45] -->
<string name="account_setup_basics_exchange_title">
Add an Exchange account</string>
<!-- Title of the screen when adding exchange account [CHAR LIMIT=45] -->
<string name="account_setup_basics_exchange_title_alternate">
Add an Exchange ActiveSync account</string>
<!-- Headline of screen when setting up new email account (large text over divider)
[CHAR LIMIT=none] -->
<string name="account_setup_basics_headline">Email account</string>
<!-- On "Set up email" screen, enthusiastic welcome message. -->
<string name="accounts_welcome">You can configure Email for most accounts in just a few steps.
</string>
<!-- On "Set up email" screen, enthusiastic welcome message (in EAS mode). -->
<string name="accounts_welcome_exchange">You can configure an Exchange account in just a few
steps.</string>
<!-- On "Set up email" screen, enthusiastic welcome message (in EAS mode). -->
<string name="accounts_welcome_exchange_alternate">
You can configure an Exchange ActiveSync account in just a few steps.</string>
<!-- On "Set up email" screen, hint for account email address text field -->
<string name="account_setup_basics_email_label">Email address</string>
<!-- On "Set up email" screen, hint for account email password text field -->
<string name="account_setup_basics_password_label">Password</string>
<!-- On "Set up email" screen, checkbox label for making the new account the default account -->
<string name="account_setup_basics_default_label">
Send email from this account by default.</string>
<!-- Button name on "Set up email" screen -->
<string name="account_setup_basics_manual_setup_action">Manual setup</string>
<!-- Toast when we can't build a URI from the given email & password -->
<!-- Note, the error message in the toast is purposefully vague, because I *don't* know
exactly what's wrong. -->
<string name="account_setup_username_password_toast">
Please type a valid email address and password.</string>
<!-- Title of dialog shown when a duplicate account is created -->
<string name="account_duplicate_dlg_title">Duplicate Account</string>
<!-- Message of dialog shown when a duplicate account is created. The display name of
the duplicate account is displayed. -->
<string name="account_duplicate_dlg_message_fmt">
This login is already in use for the account \"<xliff:g id="duplicate">%s</xliff:g>\".
</string>
<!-- String that is displayed as error text for passwords with leading or trailing
spaces. [CHAR LIMIT=none] -->
<string name="account_password_spaces_error">This password starts or ends with one or more
space characters. Many servers don\'t support passwords with spaces.</string>
<!-- On check-settings screen, this is the initially-displayed message. -->
<string name="account_setup_check_settings_retr_info_msg">
Retrieving account information\u2026</string>
<!-- Appears on screen while system is checking incoming server settings -->
<string name="account_setup_check_settings_check_incoming_msg">
Checking incoming server settings\u2026</string>
<!-- Appears on screen while system is checking outgoing server settings -->
<string name="account_setup_check_settings_check_outgoing_msg">
Checking outgoing server settings\u2026</string>
<!-- Title of "Set up email" screen after success [CHAR LIMIT=45] -->
<string name="account_setup_names_title">Account setup</string>
<!-- Text that appears on "Set up email" screen after successfully setting up an account
[CHAR LIMIT=none] -->
<string name="account_setup_names_headline">
Your account is set up, and email is on its way!</string>
<!-- On "Set up email" screen, label of text field -->
<string name="account_setup_names_account_name_label">
Give this account a name (optional)</string>
<!-- On "Set up email" screen, label of text field -->
<string name="account_setup_names_user_name_label">
Your name (displayed on outgoing messages)</string>
<!-- On "Set up email" screen, error pop-up when user_name field is empty [CHAR LIMIT=none] -->
<string name="account_setup_names_user_name_empty_error">This field cannot be blank</string>
<!-- Activity Title for the account type selector (IMAP or POP3 or EAS) [CHAR LIMIT=45] -->
<string name="account_setup_account_type_title">Account setup</string>
<!-- Headline for the the account type selector (IMAP or POP3 or EAS) [CHAR LIMIT=none] -->
<string name="account_setup_account_type_headline">Account type</string>
<!-- "Add new email account" screen, text that appears on screen -->
<string name="account_setup_account_type_instructions">What type of account is this?</string>
<!-- Do Not Translate. "Add new email account" screen, button name in response to what
type of account this is -->
<string name="account_setup_account_type_pop_action" translatable="false">POP3</string>
<!-- Do Not Translate. "Add new email account" screen, button name in response to what
type of account this is -->
<string name="account_setup_account_type_imap_action" translatable="false">IMAP</string>
<!-- Do Not Translate. "Add new email account" screen, button name in response to what
type of account this is -->
<string name="account_setup_account_type_exchange_action" translatable="false">Exchange</string>
<!-- Do Not Translate. "Add new email account" screen, button name in
response to what type of account this is -->
<string name="account_setup_account_type_exchange_action_alternate"
translatable="false">Microsoft Exchange ActiveSync</string>
<!-- "Incoming server settings" screen, title [CHAR LIMIT=45] -->
<string name="account_setup_incoming_title">Account setup</string>
<!-- "Incoming server settings" screen, headline (text over divider) [CHAR LIMIT=none] -->
<string name="account_setup_incoming_headline">Incoming server settings</string>
<!-- "Incoming server settings" screen, label for text field -->
<string name="account_setup_incoming_username_label">Username</string>
<!-- "Incoming server settings" screen, label for text field -->
<string name="account_setup_incoming_password_label">Password</string>
<!-- "Incoming server settings" screen, label for text field -->
<string name="account_setup_incoming_pop_server_label">POP3 server</string>
<!-- "Incoming server settings" screen, label for text field -->
<string name="account_setup_incoming_imap_server_label">IMAP server</string>
<!-- "Incoming server settings" screen, label for text field -->
<string name="account_setup_incoming_port_label">Port</string>
<!-- "Incoming server settings" screen, label for pop-up menu -->
<string name="account_setup_incoming_security_label">Security type</string>
<!-- "Incoming server settings" screen, options for "Security type" pop-up menu -->
<string name="account_setup_incoming_security_none_label">None</string>
<!-- "Incoming server settings" screen, options for "Security type" pop-up menu -->
<string name="account_setup_incoming_security_ssl_trust_certificates_label">
SSL (Accept all certificates)</string>
<!-- "Incoming server settings" screen, options for "Security type" pop-up menu -->
<string name="account_setup_incoming_security_ssl_label">SSL</string>
<!-- "Incoming server settings" screen, options for "Security type" pop-up menu -->
<string name="account_setup_incoming_security_tls_trust_certificates_label">
TLS (Accept all certificates)</string>
<!-- "Incoming server settings" screen, options for "Security type" pop-up menu -->
<string name="account_setup_incoming_security_tls_label">TLS</string>
<!-- "Incoming server settings" screen, label for pop-up menu -->
<string name="account_setup_incoming_delete_policy_label">Delete email from server</string>
<!-- "Incoming server settings" screen, options in pop-up menu for Delete email from server: -->
<!-- "Incoming server settings" screen, options in pop-up menu for Delete email from server: -->
<string name="account_setup_incoming_delete_policy_never_label">Never</string>
<!-- "Incoming server settings" screen, options in pop-up menu for Delete email from server: -->
<string name="account_setup_incoming_delete_policy_delete_label">
When I delete from Inbox</string>
<!-- "Incoming server settings" screen, label for setting IMAP path prefix: -->
<string name="account_setup_incoming_imap_path_prefix_label">IMAP path prefix</string>
<!-- "Incoming server settings" screen, hint for setting IMAP path prefix: -->
<string name="account_setup_incoming_imap_path_prefix_hint">Optional</string>
<!-- "Outgoing server settings" screen, title [CHAR LIMIT=45] -->
<string name="account_setup_outgoing_title">Account setup</string>
<!-- "Outgoing server settings" screen, headline (text over divider) [CHAR LIMIT=none] -->
<string name="account_setup_outgoing_headline">Outgoing server settings</string>
<!-- On "Outgoing server settings" screen, label for text field -->
<string name="account_setup_outgoing_smtp_server_label">SMTP server</string>
<!-- On "Outgoing server settings" screen, label for text field -->
<string name="account_setup_outgoing_port_label">Port</string>
<!-- On "Outgoing server settings" screen, label for pop-up menu -->
<string name="account_setup_outgoing_security_label">Security type</string>
<!-- On "Outgoing server settings" screen, label for check box -->
<string name="account_setup_outgoing_require_login_label">Require sign-in.</string>
<!-- On "Outgoing server settings" screen, label for text field -->
<string name="account_setup_outgoing_username_label">Username</string>
<!-- On "Outgoing server settings" screen, label for text field -->
<string name="account_setup_outgoing_password_label">Password</string>
<!-- Title of "Exchange server settings" screen [CHAR LIMIT=45] -->
<string name="account_setup_exchange_title">Account setup</string>
<!-- Headline of "Exchange server settings" screen (text over divider) [CHAR LIMIT=none] -->
<string name="account_setup_exchange_headline">Server settings</string>
<!-- On "Exchange" setup screen, the name of the server -->
<string name="account_setup_exchange_server_label">Server</string>
<!-- On "Exchange" setup screen, the domain\\username -->
<string name="account_setup_exchange_username_label">Domain\\Username</string>
<!-- On "Exchange" setup screen, the use-SSL checkbox label -->
<string name="account_setup_exchange_ssl_label">Use secure connection (SSL)</string>
<!-- On "Exchange" setup screen, the trust ssl certificates checkbox label -->
<string name="account_setup_exchange_trust_certificates_label">Accept all SSL certificates</string>
<!-- On "Exchange" setup screen, the exchange device-id label [CHAR LIMIT=30] -->
<string name="account_setup_exchange_device_id_label">Mobile Device ID</string>
<!-- In Account setup options screen, Activity title [CHAR LIMIT=45] -->
<string name="account_setup_options_title">Account settings</string>
<!-- In Account setup options screen, Activity headline [CHAR LIMIT=none] -->
<string name="account_setup_options_headline">Account options</string>
<!-- In Account setup options screen, label for email check frequency selector -->
<string name="account_setup_options_mail_check_frequency_label">Inbox checking frequency</string>
<!-- In Account setup options & Account Settings screens, label for email check frequency option -->
<string name="account_setup_options_mail_check_frequency_never">Never</string>
<!-- In Account setup options & Account Settings screens, label for email check frequency option -->
<string name="account_setup_options_mail_check_frequency_push">Automatic (Push)</string>
<!-- In Account setup options & Account Settings screens, email check frequency option -->
<string name="account_setup_options_mail_check_frequency_5min">Every 5 minutes</string>
<!-- In Account setup options & Account Settings screens, email check frequency option -->
<string name="account_setup_options_mail_check_frequency_10min">Every 10 minutes</string>
<!-- In Account setup options & Account Settings screens, email check frequency option -->
<string name="account_setup_options_mail_check_frequency_15min">Every 15 minutes</string>
<!-- In Account setup options & Account Settings screens, email check frequency option -->
<string name="account_setup_options_mail_check_frequency_30min">Every 30 minutes</string>
<!-- In Account setup options & Account Settings screens, email check frequency option -->
<string name="account_setup_options_mail_check_frequency_1hour">Every hour</string>
<!-- Check box label on "Set up email" screen to make this the default account -->
<!-- Note, this should usually match the default account summary preference string -->
<string name="account_setup_options_default_label">Send email from this account by default.</string>
<!-- In Account setup options & Account Settings screens, check box for new-mail notification -->
<string name="account_setup_options_notify_label">Notify me when email arrives.</string>
<!-- In Account setup options screen, optional check box to also sync contacts -->
<string name="account_setup_options_sync_contacts_label">Sync contacts from this account.
</string>
<!-- In Account setup options screen, optional check box to also sync contacts -->
<string name="account_setup_options_sync_calendar_label">Sync calendar from this account.
</string>
Use AccountManager for POP/IMAP; refactor setup classes There are two major, interrelated parts to this CL: 1) Clean up the activities to reduce the use of Intents to pass information between activities; instead, we use a common SetupData structure that automatically saved/restored as necessary during the setup flow. A fair amount of code and inconsistent use of Bundle extras has been eliminated in the process. * Create SetupData structure, setters/getters, and initialization methods to simplify the preservation of state during setup flow * Remove all state/flow extras from Intents; Intents now only specify the Activity to be started, which should greatly simplify the transition to Fragments. * Remove all state/flow fields from Activities * Modify existing setup activity unit tests and confirm tests pass 2) Create AccountManager accounts for POP/IMAP email accounts to provide consistency in user experience. Also, internal flows are now identical as between account types. * Move account reconciliation from SyncManager to MailService, so that reconciliation is consistent between email and exchange accounts; move unit tests as appropriate * Add a "Sync Email" setting for POP/IMAP/EAS * Change MailService to respect the "Sync Email" setting in Settings -> Accounts & sync * Create PopImapSyncAdapterService to handle manual POP/IMAP sync as requested by SyncManager; add EmailSyncAdapterService to perform the same function for EAS * Use new PopImapAuthenticatorService to add AccountManager accounts for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest and add related xml files * Update AccountSettings to use SetupData Miscellaneous other changes: * Only allow valid port numbers in incoming/outgoing setup Bug: 1712475 Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
2010-07-08 17:08:47 +00:00
<!-- In Account setup options screen, check box to sync email -->
<string name="account_setup_options_sync_email_label">Sync email from this account.
</string>
<!-- In Account setup options screen, check box to auto-download attachments [CHAR LIMIT=none]
-->
<string name="account_setup_options_background_attachments_label">
Automatically download attachments when connected to Wi-Fi</string>
<!-- Dialog title when "setup" could not finish -->
<string name="account_setup_failed_dlg_title">Setup could not finish</string>
<!-- In Account setup options screen, label for email lookback selector -->
<string name="account_setup_options_mail_window_label">Amount to synchronize</string>
<!-- In account setup options & account settings screens (exchange), sync window length; this
implies loading a 'reasonable' number of messages [CHAR LIMIT=25] -->
<string name="account_setup_options_mail_window_auto">Automatic</string>
<!-- A sync window length setting (i.e. load messages this far back) [CHAR LIMIT=25] -->
<string name="account_setup_options_mail_window_1day">One day</string>
<!-- A sync window length setting (i.e. load messages this far back) [CHAR LIMIT=25] -->
<string name="account_setup_options_mail_window_3days">Three days</string>
<!-- A sync window length setting (i.e. load messages this far back) [CHAR LIMIT=25] -->
<string name="account_setup_options_mail_window_1week">One week</string>
<!-- A sync window length setting (i.e. load messages this far back) [CHAR LIMIT=25] -->
<string name="account_setup_options_mail_window_2weeks">Two weeks</string>
<!-- A sync window length setting (i.e. load messages this far back) [CHAR LIMIT=25] -->
<string name="account_setup_options_mail_window_1month">One month</string>
<!-- A sync window length setting (i.e. load messages this far back) [CHAR LIMIT=25] -->
<string name="account_setup_options_mail_window_all">All</string>
<!-- "Setup could not finish" dialog text; e.g., Username or password incorrect -->
<string name="account_setup_failed_dlg_auth_message">Username or password incorrect.</string>
<!-- "Setup could not finish" dialog text; e.g., Username or password incorrect\n(ERR01 Account does not exist) -->
<string name="account_setup_failed_dlg_auth_message_fmt">Username or password incorrect.\n(<xliff:g id="error">%s</xliff:g>)</string>
<!-- "Setup could not finish" dialog text; e.g., Cannot safely connect to server -->
<string name="account_setup_failed_dlg_certificate_message">Cannot safely connect to server.</string>
<!-- "Setup could not finish" dialog text; e.g., Cannot safely connect to server\n(TLS Not Supported) -->
<string name="account_setup_failed_dlg_certificate_message_fmt">Cannot safely connect to server.\n(<xliff:g id="error">%s</xliff:g>)</string>
<!-- Dialog text for ambiguous setup failure; server error/bad credentials [CHAR LIMIT=none] -->
<string name="account_setup_failed_check_credentials_message">
The server responded with an error; please check your username and password
and try again.</string>
<!-- "Setup could not finish" dialog text; e.g., Cannot connect to server -->
<string name="account_setup_failed_dlg_server_message">Cannot connect to server.</string>
<!-- "Setup could not finish" dialog text; e.g., Cannot connect to server\n(Connection timed out) -->
<string name="account_setup_failed_dlg_server_message_fmt">Cannot connect to server.\n(<xliff:g id="error">%s</xliff:g>)</string>
<!-- Additional diagnostic text when TLS was required but the server doesn't support it -->
<string name="account_setup_failed_tls_required">TLS required but not supported by server.</string>
<!-- Additional diagnostic text when server does not support any of our authentication methods -->
<string name="account_setup_failed_auth_required">Authentication methods are not supported by server.</string>
<!-- Additional diagnostic text when server connection failed due to security error -->
<string name="account_setup_failed_security">Unable to open connection to server due to security error.</string>
<!-- Additional diagnostic text when server connection failed due to io error (connection) -->
<string name="account_setup_failed_ioerror">Unable to open connection to server.</string>
<!-- Additional diagnostic text when server connection failed due to our inability to support a
required EAS protocol version [CHAR LIMIT=none] -->
<string name="account_setup_failed_protocol_unsupported">
You entered an incorrect server address or the server requires a protocol version that
Email does not support.</string>
<!-- Additional diagnostic text when server access was denied; the user should contact the
administrator of the server for more information [CHAR LIMIT=none] -->
<string name="account_setup_failed_access_denied">
You do not have permission to sync with this server. Please contact your server\'s
administrator for more information.</string>
<!-- Dialog title when validation requires security provisioning (e.g. support
for device lock PIN, or remote wipe.) and we ask the user permission before continuing -->
<string name="account_setup_security_required_title">Remote security administration</string>
<!-- Additional diagnostic text when validation requires security provisioning (e.g. support
for device lock PIN, or remote wipe.) and we ask the user permission before continuing.
[CHAR LIMIT=none] -->
<string name="account_setup_security_policies_required_fmt">
The server <xliff:g id="server">%s</xliff:g> requires that you allow it to remotely control
some security features of your Android device. Do you want to finish setting up this
account?</string>
<!-- Additional diagnostic text when validation failed due to required provisioning not
being supported [CHAR LIMIT=none] -->
<string name="account_setup_failed_security_policies_unsupported">
This server requires security features that your Android device does not support,
including: <xliff:g id="error">%s</xliff:g></string>
<!-- The user name can only be changed during initial account setup. [CHAR LIMIT=none] -->
<string name="account_setup_username_uneditable_error">You can\'t change an account\'s username.
To add an account with a different username, touch Add account.</string>
<!-- Warning given to users when they request disabling device administration (i.e. that their
administered accounts will be deleted) [CHAR LIMIT=none] -->
<string name="disable_admin_warning">WARNING: Deactivating the Email application\'s authority
to administer your device will delete all Email accounts that require it, along with their
email, contacts, calendar events, and other data.</string>
<!-- Dialog shown when the account requires some amount of device security provisioning,
just before jumping into system settings such as Device Policy grant, PIN/password,
or encryption setup. [CHAR_LIMIT=40] -->
<string name="account_security_dialog_title">Security update required</string>
<!-- Additional diagnostic text when the account requires some amount of device security
provisioning, just before jumping into system settings such as Device Policy grant,
PIN/password, or encryption setup. [CHAR LIMIT=none] -->
<string name="account_security_dialog_content_fmt">
<xliff:g id="account">%s</xliff:g> requires you to update your security settings.</string>
<!-- Notification ticker when device security required (note: unused in Holo XL) -->
<string name="security_notification_ticker_fmt">
Account \"<xliff:g id="account">%s</xliff:g>\" requires security settings update.
</string>
<!-- Notification content title when device security required [CHAR_LIMIT=30] -->
<string name="security_notification_content_title">Security update required</string>
<!-- Title of the activity that dispatches changes to device security. Not normally seen. -->
<string name="account_security_title">Device Security</string>
<!-- Additional diagnostic text when the email app asserts control of the phone.
[CHAR LIMIT=none] -->
<string name="account_security_policy_explanation_fmt">
The server <xliff:g id="server">%s</xliff:g> requires that you allow it to remotely control
some security features of your Android device.</string>
<!-- "Setup could not finish" dialog action button -->
<string name="account_setup_failed_dlg_edit_details_action">Edit details</string>
<!-- Notification ticker when device password is getting ready to expire [CHAR_LIMIT=80] -->
<string name="password_expire_warning_ticker_fmt">
\"<xliff:g id="account">%s</xliff:g>\" requires you to change your lock screen
PIN or password.</string>
<!-- Notification content title when device password is getting ready to expire
[CHAR_LIMIT=30] -->
<string name="password_expire_warning_content_title">Lock screen password expiring</string>
<!-- Notification ticker when device password has expired [CHAR_LIMIT=80] -->
<string name="password_expired_ticker">Your lock screen PIN or password has expired.</string>
<!-- Notification content title when device password has expired [CHAR_LIMIT=28] -->
<string name="password_expired_content_title">Lock screen password expired</string>
<!-- Dialog title if device pin/password is going to expire soon. [CHAR_LIMIT=40] -->
<string name="password_expire_warning_dialog_title">Lock screen password expiring</string>
<!-- Dialog content device pin/password is going to expire soon. [CHAR_LIMIT=none] -->
<string name="password_expire_warning_dialog_content_fmt">
You must change your lock screen PIN or password soon, or the data for
<xliff:g id="account">%s</xliff:g> will be erased. Change it now?</string>
<!-- Dialog title if device pin/password has already expired. [CHAR_LIMIT=40] -->
<string name="password_expired_dialog_title">Lock screen password expired</string>
<!-- Dialog content device pin/password has already expired. [CHAR_LIMIT=none] -->
<string name="password_expired_dialog_content_fmt">
The data for <xliff:g id="account">%s</xliff:g> is being erased from your device.
You can restore it by changing your lock screen PIN or password. Change it now?</string>
<!-- On AccountSettingsXL, dialog text if you try to exit in/out/eas fragment (server settings)
without checking/saving [CHAR LIMIT=none]-->
<string name="account_settings_exit_server_settings">Discard unsaved changes?</string>
<!-- On AccountSettingsXL, dialog title if you were brought here due to a login failure.
[CHAR_LIMIT=40] -->
<string name="account_settings_login_dialog_title">Sign-in failed</string>
<!-- On AccountSettingsXL, dialog content if you were brought here due to a login failure.
[CHAR_LIMIT=none] -->
<string name="account_settings_login_dialog_content_fmt">
The username or password for <xliff:g id="account">%s</xliff:g> is incorrect.
Update them now?</string>
<!-- On Settings screen, section heading -->
<string name="account_settings_title_fmt">General settings</string>
<!-- On Settings screen, setting option name -->
<string name="account_settings_default_label">Default account</string>
<!-- Check box "summary" label on "Account options" screen to make this the default account -->
<!-- Note, this should usually match the default account account setup checkbox string -->
<string name="account_settings_default_summary">Send email from this account by default</string>
<!-- On Settings screen, setting option name -->
<!-- Title of account preference for downloading attachments in background [CHAR LIMIT=32] -->
<string name="account_settings_background_attachments_label">
Auto-download attachments</string>
<!-- Summary of account preference for downloading attachments in background [CHAR LIMIT=64] -->
<string name="account_settings_background_attachments_summary">
Automatically download attachments when connected to Wi-Fi</string>
<string name="account_settings_notify_label">Email notifications</string>
<!-- On Settings screen, summary line when called via AccountManager for Exchange accounts
[CHAR LIMIT=50] -->
Use AccountManager for POP/IMAP; refactor setup classes There are two major, interrelated parts to this CL: 1) Clean up the activities to reduce the use of Intents to pass information between activities; instead, we use a common SetupData structure that automatically saved/restored as necessary during the setup flow. A fair amount of code and inconsistent use of Bundle extras has been eliminated in the process. * Create SetupData structure, setters/getters, and initialization methods to simplify the preservation of state during setup flow * Remove all state/flow extras from Intents; Intents now only specify the Activity to be started, which should greatly simplify the transition to Fragments. * Remove all state/flow fields from Activities * Modify existing setup activity unit tests and confirm tests pass 2) Create AccountManager accounts for POP/IMAP email accounts to provide consistency in user experience. Also, internal flows are now identical as between account types. * Move account reconciliation from SyncManager to MailService, so that reconciliation is consistent between email and exchange accounts; move unit tests as appropriate * Add a "Sync Email" setting for POP/IMAP/EAS * Change MailService to respect the "Sync Email" setting in Settings -> Accounts & sync * Create PopImapSyncAdapterService to handle manual POP/IMAP sync as requested by SyncManager; add EmailSyncAdapterService to perform the same function for EAS * Use new PopImapAuthenticatorService to add AccountManager accounts for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest and add related xml files * Update AccountSettings to use SetupData Miscellaneous other changes: * Only allow valid port numbers in incoming/outgoing setup Bug: 1712475 Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
2010-07-08 17:08:47 +00:00
<string name="account_settings_summary">Sync frequency, notifications, etc.</string>
<!-- On Settings screen, setting summary text -->
<string name="account_settings_notify_summary">Notify in System bar when email arrives</string>
<!-- On Settings screen, setting option name and title of dialog box that opens -->
<string name="account_settings_mail_check_frequency_label">Inbox check frequency</string>
<!-- On Settings screen, setting option name -->
<string name="account_settings_incoming_label">Incoming settings</string>
<!-- On Settings screen, setting option summary [CHAR LIMIT=64] -->
<string name="account_settings_incoming_summary">
Username, password, and other incoming server settings</string>
<!-- On Settings screen, setting option name -->
<string name="account_settings_outgoing_label">Outgoing settings</string>
<!-- On Settings screen, setting option summary [CHAR LIMIT=64] -->
<string name="account_settings_outgoing_summary">
Username, password, and other outgoing server settings</string>
<!-- On Settings screen, setting option name -->
<string name="account_settings_description_label">Account name</string>
<!-- On Settings screen, setting option name -->
<string name="account_settings_name_label">Your name</string>
<!-- On Settings screen, setting option name -->
<string name="account_settings_signature_label">Signature</string>
<!-- On Settings screen, setting option name -->
<string name="account_settings_signature_hint">Append text to messages you send</string>
<!-- On Settings screen, section heading -->
<string name="account_settings_notifications">Notification settings</string>
<!-- On settings screen, sync contacts check box label [CHAR LIMIT=20]-->
Use AccountManager for POP/IMAP; refactor setup classes There are two major, interrelated parts to this CL: 1) Clean up the activities to reduce the use of Intents to pass information between activities; instead, we use a common SetupData structure that automatically saved/restored as necessary during the setup flow. A fair amount of code and inconsistent use of Bundle extras has been eliminated in the process. * Create SetupData structure, setters/getters, and initialization methods to simplify the preservation of state during setup flow * Remove all state/flow extras from Intents; Intents now only specify the Activity to be started, which should greatly simplify the transition to Fragments. * Remove all state/flow fields from Activities * Modify existing setup activity unit tests and confirm tests pass 2) Create AccountManager accounts for POP/IMAP email accounts to provide consistency in user experience. Also, internal flows are now identical as between account types. * Move account reconciliation from SyncManager to MailService, so that reconciliation is consistent between email and exchange accounts; move unit tests as appropriate * Add a "Sync Email" setting for POP/IMAP/EAS * Change MailService to respect the "Sync Email" setting in Settings -> Accounts & sync * Create PopImapSyncAdapterService to handle manual POP/IMAP sync as requested by SyncManager; add EmailSyncAdapterService to perform the same function for EAS * Use new PopImapAuthenticatorService to add AccountManager accounts for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest and add related xml files * Update AccountSettings to use SetupData Miscellaneous other changes: * Only allow valid port numbers in incoming/outgoing setup Bug: 1712475 Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
2010-07-08 17:08:47 +00:00
<string name="account_settings_sync_contacts_enable">Sync Contacts</string>
<!-- On settings screen, sync contacts summary text [CHAR LIMIT=35] -->
Use AccountManager for POP/IMAP; refactor setup classes There are two major, interrelated parts to this CL: 1) Clean up the activities to reduce the use of Intents to pass information between activities; instead, we use a common SetupData structure that automatically saved/restored as necessary during the setup flow. A fair amount of code and inconsistent use of Bundle extras has been eliminated in the process. * Create SetupData structure, setters/getters, and initialization methods to simplify the preservation of state during setup flow * Remove all state/flow extras from Intents; Intents now only specify the Activity to be started, which should greatly simplify the transition to Fragments. * Remove all state/flow fields from Activities * Modify existing setup activity unit tests and confirm tests pass 2) Create AccountManager accounts for POP/IMAP email accounts to provide consistency in user experience. Also, internal flows are now identical as between account types. * Move account reconciliation from SyncManager to MailService, so that reconciliation is consistent between email and exchange accounts; move unit tests as appropriate * Add a "Sync Email" setting for POP/IMAP/EAS * Change MailService to respect the "Sync Email" setting in Settings -> Accounts & sync * Create PopImapSyncAdapterService to handle manual POP/IMAP sync as requested by SyncManager; add EmailSyncAdapterService to perform the same function for EAS * Use new PopImapAuthenticatorService to add AccountManager accounts for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest and add related xml files * Update AccountSettings to use SetupData Miscellaneous other changes: * Only allow valid port numbers in incoming/outgoing setup Bug: 1712475 Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
2010-07-08 17:08:47 +00:00
<string name="account_settings_sync_contacts_summary">Sync contacts for this account</string>
<!-- On settings screen, sync calendar check box label [CHAR LIMIT=20]-->
Use AccountManager for POP/IMAP; refactor setup classes There are two major, interrelated parts to this CL: 1) Clean up the activities to reduce the use of Intents to pass information between activities; instead, we use a common SetupData structure that automatically saved/restored as necessary during the setup flow. A fair amount of code and inconsistent use of Bundle extras has been eliminated in the process. * Create SetupData structure, setters/getters, and initialization methods to simplify the preservation of state during setup flow * Remove all state/flow extras from Intents; Intents now only specify the Activity to be started, which should greatly simplify the transition to Fragments. * Remove all state/flow fields from Activities * Modify existing setup activity unit tests and confirm tests pass 2) Create AccountManager accounts for POP/IMAP email accounts to provide consistency in user experience. Also, internal flows are now identical as between account types. * Move account reconciliation from SyncManager to MailService, so that reconciliation is consistent between email and exchange accounts; move unit tests as appropriate * Add a "Sync Email" setting for POP/IMAP/EAS * Change MailService to respect the "Sync Email" setting in Settings -> Accounts & sync * Create PopImapSyncAdapterService to handle manual POP/IMAP sync as requested by SyncManager; add EmailSyncAdapterService to perform the same function for EAS * Use new PopImapAuthenticatorService to add AccountManager accounts for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest and add related xml files * Update AccountSettings to use SetupData Miscellaneous other changes: * Only allow valid port numbers in incoming/outgoing setup Bug: 1712475 Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
2010-07-08 17:08:47 +00:00
<string name="account_settings_sync_calendar_enable">Sync Calendar</string>
<!-- On settings screen, sync calendar summary text [CHAR LIMIT=35] -->
Use AccountManager for POP/IMAP; refactor setup classes There are two major, interrelated parts to this CL: 1) Clean up the activities to reduce the use of Intents to pass information between activities; instead, we use a common SetupData structure that automatically saved/restored as necessary during the setup flow. A fair amount of code and inconsistent use of Bundle extras has been eliminated in the process. * Create SetupData structure, setters/getters, and initialization methods to simplify the preservation of state during setup flow * Remove all state/flow extras from Intents; Intents now only specify the Activity to be started, which should greatly simplify the transition to Fragments. * Remove all state/flow fields from Activities * Modify existing setup activity unit tests and confirm tests pass 2) Create AccountManager accounts for POP/IMAP email accounts to provide consistency in user experience. Also, internal flows are now identical as between account types. * Move account reconciliation from SyncManager to MailService, so that reconciliation is consistent between email and exchange accounts; move unit tests as appropriate * Add a "Sync Email" setting for POP/IMAP/EAS * Change MailService to respect the "Sync Email" setting in Settings -> Accounts & sync * Create PopImapSyncAdapterService to handle manual POP/IMAP sync as requested by SyncManager; add EmailSyncAdapterService to perform the same function for EAS * Use new PopImapAuthenticatorService to add AccountManager accounts for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest and add related xml files * Update AccountSettings to use SetupData Miscellaneous other changes: * Only allow valid port numbers in incoming/outgoing setup Bug: 1712475 Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
2010-07-08 17:08:47 +00:00
<string name="account_settings_sync_calendar_summary">Sync calendar for this account</string>
<!-- On settings screen, sync email check box label [CHAR LIMIT=20]-->
Use AccountManager for POP/IMAP; refactor setup classes There are two major, interrelated parts to this CL: 1) Clean up the activities to reduce the use of Intents to pass information between activities; instead, we use a common SetupData structure that automatically saved/restored as necessary during the setup flow. A fair amount of code and inconsistent use of Bundle extras has been eliminated in the process. * Create SetupData structure, setters/getters, and initialization methods to simplify the preservation of state during setup flow * Remove all state/flow extras from Intents; Intents now only specify the Activity to be started, which should greatly simplify the transition to Fragments. * Remove all state/flow fields from Activities * Modify existing setup activity unit tests and confirm tests pass 2) Create AccountManager accounts for POP/IMAP email accounts to provide consistency in user experience. Also, internal flows are now identical as between account types. * Move account reconciliation from SyncManager to MailService, so that reconciliation is consistent between email and exchange accounts; move unit tests as appropriate * Add a "Sync Email" setting for POP/IMAP/EAS * Change MailService to respect the "Sync Email" setting in Settings -> Accounts & sync * Create PopImapSyncAdapterService to handle manual POP/IMAP sync as requested by SyncManager; add EmailSyncAdapterService to perform the same function for EAS * Use new PopImapAuthenticatorService to add AccountManager accounts for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest and add related xml files * Update AccountSettings to use SetupData Miscellaneous other changes: * Only allow valid port numbers in incoming/outgoing setup Bug: 1712475 Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
2010-07-08 17:08:47 +00:00
<string name="account_settings_sync_email_enable">Sync Email</string>
<!-- On settings screen, sync email summary text [CHAR LIMIT=35] -->
Use AccountManager for POP/IMAP; refactor setup classes There are two major, interrelated parts to this CL: 1) Clean up the activities to reduce the use of Intents to pass information between activities; instead, we use a common SetupData structure that automatically saved/restored as necessary during the setup flow. A fair amount of code and inconsistent use of Bundle extras has been eliminated in the process. * Create SetupData structure, setters/getters, and initialization methods to simplify the preservation of state during setup flow * Remove all state/flow extras from Intents; Intents now only specify the Activity to be started, which should greatly simplify the transition to Fragments. * Remove all state/flow fields from Activities * Modify existing setup activity unit tests and confirm tests pass 2) Create AccountManager accounts for POP/IMAP email accounts to provide consistency in user experience. Also, internal flows are now identical as between account types. * Move account reconciliation from SyncManager to MailService, so that reconciliation is consistent between email and exchange accounts; move unit tests as appropriate * Add a "Sync Email" setting for POP/IMAP/EAS * Change MailService to respect the "Sync Email" setting in Settings -> Accounts & sync * Create PopImapSyncAdapterService to handle manual POP/IMAP sync as requested by SyncManager; add EmailSyncAdapterService to perform the same function for EAS * Use new PopImapAuthenticatorService to add AccountManager accounts for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest and add related xml files * Update AccountSettings to use SetupData Miscellaneous other changes: * Only allow valid port numbers in incoming/outgoing setup Bug: 1712475 Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
2010-07-08 17:08:47 +00:00
<string name="account_settings_sync_email_summary">Sync email for this account</string>
<!-- On Settings screen, vibrate pop-up menu label -->
<string name="account_settings_vibrate_when_label">Vibrate</string>
<!-- On Settings screen, vibrate pop-up menu summary text -->
<string name="account_settings_vibrate_when_summary">Also vibrate when email arrives</string>
<!-- On Settings screen, vibrate pop-up menu option "always" text -->
<string name="account_settings_vibrate_when_always">Always</string>
<!-- On Settings screen, vibrate pop-up menu option "silent" text -->
<string name="account_settings_vibrate_when_silent">Only when silent</string>
<!-- On Settings screen, vibrate pop-up menu option "never" text -->
<string name="account_settings_vibrate_when_never">Never</string>
<!-- Dialog title for the Vibrate dialog -->
<string name="account_settings_vibrate_when_dlg_title">Vibrate</string>
<!-- On Settings screen, setting option name -->
<string name="account_settings_ringtone">Select ringtone</string>
<!-- On Settings screen, section heading -->
<string name="account_settings_servers">Server settings</string>
<!-- Title of Remove account confirmation dialog box -->
<string name="account_delete_dlg_title">Remove account</string>
<!-- Message of Remove account confirmation dialog box -->
<string name="account_delete_dlg_instructions_fmt">
The account \"<xliff:g id="account">%s</xliff:g>\" will be removed from Email.</string>
<!-- On Settings screen, section heading for delete account [CHAR LIMIT=none] -->
<string name="account_settings_category_delete_account">Remove account</string>
<!-- On Settings screen, settings option for delete account [CHAR LIMIT=none] -->
<string name="account_settings_delete_account_label">Remove account</string>
<!-- Strings used for account shortcut picker -->
<!-- String displayed in launcher [CHAR_LIMIT=10] -->
<string name="account_shortcut_picker_name">Email account</string>
<!-- Title of the account list for the shortcut picker [CHAR_LIMIT=20] -->
<string name="account_shortcut_picker_title">Select an account</string>
<!-- Title of mailbox list for the shortcut picker [CHAR_LIMIT=20] -->
<string name="mailbox_shortcut_picker_title">Select a mailbox</string>
<!-- Toast shown when the selected account no longer exists. This is used when, for example,
a shotcut or a widget is stale and points at a deleted account.
[CHAR_LIMIT=none]-->
<string name="toast_account_not_found">Account not found. It may have been removed.</string>
<!-- Message that appears when adding a Windows Live Hotmail Plus account -->
<string name="provider_note_live">Only some \"Plus\" accounts include POP access
allowing this program to connect. If you are not able to sign in with
your correct email address and password, you may not have a paid
\"Plus\" account. Please launch the Web browser to gain access to
these mail accounts.</string>
<!-- Message that appears when adding a T-Online account -->
<string name="provider_note_t_online">Before setting up this email account, please visit the T-Online Web site and create a password for POP3 email access.</string>
<!-- Name of Microsoft Exchange account type; used by AccountManager -->
<string name="exchange_name">Corporate</string>
<!-- Name of Microsoft Exchange account type; used by AccountManager -->
<string name="exchange_name_alternate">Microsoft Exchange ActiveSync</string>
<!-- Message that appears if the AccountManager cannot create the system Account -->
<string name="system_account_create_failed">The AccountManager could not create the Account; please try again.</string>
<!-- Strings that support the DeviceAdmin / DevicePolicyManager API -->
<!-- Name of the DeviceAdmin (seen in settings & in user confirmation screen) -->
<string name="device_admin_label">Email</string>
<!-- Long-form description of the DeviceAdmin (2nd line in settings & in user conf. screen) -->
<string name="device_admin_description">Enables server-specified security policies</string>
<!-- Strings used for GAL access -->
<!-- Displayed in small separator in to/cc/bcc dropdowns, when searching GAL begins.
Example: "Searching bigcompany.com..." -->
<string name="gal_searching_fmt">Searching <xliff:g id="domain">%s</xliff:g>\u2026</string>
<!-- Displayed in small separator in to/cc/bcc dropdowns, when searching GAL completes,
and all of the server results are being displayed. Example:
"5 results from bigcompany.com..." -->
<plurals name="gal_completed_fmt">
<!-- Case of one result from server. -->
<item quantity="one"><xliff:g id="results" example="1">%1$d</xliff:g> result
from <xliff:g id="domain">%2$s</xliff:g></item>
<!-- Case of multiple results from server -->
<item quantity="other"><xliff:g id="results" example="20">%1$d</xliff:g> results
from <xliff:g id="domain">%2$s</xliff:g></item>
</plurals>
<!-- General Preferences Screen -->
<!-- Label in preferences header to describe general preferences [CHAR LIMIT=32] -->
<string name="header_label_general_preferences">Email Preferences</string>
<!-- First category in general preferences [CHAR LIMIT=64] -->
<string name="category_general_preferences">Application Preferences</string>
<!-- General preference: Label of the setting for the direction to move to
when deleting the current message.
Options contain "newer message","older message", etc. [CHAR LIMIT=32] -->
<string name="general_preference_auto_advance_label">Auto-advance</string>
<!-- General preference: Description of the setting for the direction to move to
when deleting the current message.
Options contain "newer message","older message", etc. [CHAR LIMIT=64] -->
<string name="general_preference_auto_advance_summary">
Select which screen to show after you delete a message</string>
<!-- General preference: Title of the dialog box containing options for setting for
the direction to move to when deleting the current message.
Options contain "newer message","older message", etc. [CHAR LIMIT=32] -->
<string name="general_preference_auto_advance_dialog_title">Advance to</string>
<!-- General preference: Option for the setting for
the direction to move to when deleting the current message.
This option is for "move to the newer message" [CHAR LIMIT=32] -->
<string name="general_preference_auto_advance_newer">Newer message</string>
<!-- General preference: Option for the setting for
the direction to move to when deleting the current message.
This option is for "move to the older message" [CHAR LIMIT=32] -->
<string name="general_preference_auto_advance_older">Older message</string>
<!-- General preference: Option for the setting for
the direction to move to when deleting the current message.
This option is for "move back to the message list" [CHAR LIMIT=32] -->
<string name="general_preference_auto_advance_message_list">Message list</string>
<!-- General preference: Label of the setting for the text zoom. [CHAR LIMIT=32] -->
<string name="general_preference_text_zoom_label">Message text size</string>
<!-- General preference: Description of each setting for text zoom. The entries here must
correspond to the strings general_preference_text_zoom_tiny,
general_preference_text_zoom_small, general_preference_text_zoom_normal, etc.
[CHAR LIMIT=64] -->
<string-array name="general_preference_text_zoom_summary_array">
<item>Display content of messages in tiny sized text</item>
<item>Display content of messages in small sized text</item>
<item>Display content of messages in normal sized text</item>
<item>Display content of messages in large sized text</item>
<item>Display content of messages in huge sized text</item>
</string-array>
<!-- General preference: Title of the dialog box with options for text zoom. [CHAR LIMIT=32] -->
<string name="general_preference_text_zoom_dialog_title">Message text size</string>
<!-- General preference: Text zoom. Value is "tiny" (-2) [CHAR LIMIT=32] -->
<string name="general_preference_text_zoom_tiny">Tiny</string>
<!-- General preference: Text zoom. Value is "small" (-1) [CHAR LIMIT=32] -->
<string name="general_preference_text_zoom_small">Small</string>
<!-- General preference: Text zoom. Value is "normal" (0) [CHAR LIMIT=32] -->
<string name="general_preference_text_zoom_normal">Normal</string>
<!-- General preference: Text zoom. Value is "large" (+1) [CHAR LIMIT=32] -->
<string name="general_preference_text_zoom_large">Large</string>
<!-- General preference: Text zoom. Value is "huge" (+2) [CHAR LIMIT=32] -->
<string name="general_preference_text_zoom_huge">Huge</string>
<!-- Generic string for "current position" / "total number" [CHAR LIMIT=12] -->
<string name="position_of_count"><xliff:g example="1">%1$d</xliff:g> of <xliff:g
example="12">%2$s</xliff:g></string>
<!-- Widget -->
<!-- Instruction for how to move to different widget views [CHAR LIMIT=20] -->
<string name="widget_other_views">Tap icon to change</string>
<!-- Header for the "Combined Inbox" view (showing mail in all inboxes) [CHAR LIMIT=20] -->
<string name="widget_all_mail">Combined Inbox</string>
<!-- Header for the "Unread" widget view (showing all unread mail) [CHAR LIMIT=20] -->
<string name="widget_unread">Unread</string>
<!-- Header for the "Starred" widget view (showing all starred mail) [CHAR LIMIT=20] -->
<string name="widget_starred">Starred</string>
<!-- Shown when waiting for mail data to be loaded into the widget list view [CHAR LIMIT=20] -->
<string name="widget_loading">Loading\u2026</string>
<!-- Shown when no accounts are configured [CHAR LIMIT=35] -->
<string name="widget_touch_to_configure">Touch to configure</string>
<!-- Generic string shown instead of regular numbers, when a number is larger than 999.
This should not be altered if the original string ("999+") makes sense in the
target language. Typical alternatives include "+999" and ">999". [CHAR_LIMIT=4] -->
<string name="more_than_999">999+</string>
<!-- Search title (should be the app name) [CHAR LIMIT=16] -->
<string name="search_title">Email</string>
<!-- The hint used in the search EditText field [CHAR LIMIT=35] -->
<string name="search_hint">Search email</string>
<!-- STOPSHIP Temporary UI DO NOT TRANSLATE-->
<!-- In Mailbox setings, label for email check frequency selector -->
<string name="mailbox_options_check_frequency_label">Mailbox check frequency</string>
<!-- In Mailbox setings, label for email check lookback selector -->
<string name="mailbox_options_lookback_label">Mailbox check lookback</string>
<!-- A long placeholder string to be used in template XML files message_list_item_*.xml.
Used only in layout computation, and never actually exposed to the user. -->
<string name="long_string" translatable="false">looooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooong</string>
</resources>