replicant-frameworks_native/services/surfaceflinger/DisplayHardware/FramebufferSurface.cpp
Naseer Ahmed b9127bdbe3 surfaceflinger: Set max acquired buffer count
If triple framebuffers are enabled, the number of acquired
buffers isn't increased by default. Set the count to one less
than the max buffers to make sure all three buffers come into
play.

Change-Id: I8fae1b5564fbea598e415a86b0a21c3449c92d87
2015-11-07 01:21:36 -08:00

178 lines
5.9 KiB
C++

/*
**
** Copyright 2012 The Android Open Source Project
**
** Licensed under the Apache License Version 2.0(the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing software
** distributed under the License is distributed on an "AS IS" BASIS
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <cutils/log.h>
#include <utils/String8.h>
#include <ui/Rect.h>
#include <EGL/egl.h>
#include <hardware/hardware.h>
#include <gui/BufferItem.h>
#include <gui/GraphicBufferAlloc.h>
#include <gui/Surface.h>
#include <ui/GraphicBuffer.h>
#include "FramebufferSurface.h"
#include "HWComposer.h"
#ifndef NUM_FRAMEBUFFER_SURFACE_BUFFERS
#define NUM_FRAMEBUFFER_SURFACE_BUFFERS (2)
#endif
// ----------------------------------------------------------------------------
namespace android {
// ----------------------------------------------------------------------------
/*
* This implements the (main) framebuffer management. This class is used
* mostly by SurfaceFlinger, but also by command line GL application.
*
*/
FramebufferSurface::FramebufferSurface(HWComposer& hwc, int disp,
const sp<IGraphicBufferConsumer>& consumer) :
ConsumerBase(consumer),
mDisplayType(disp),
mCurrentBufferSlot(-1),
mCurrentBuffer(0),
mHwc(hwc)
{
mName = "FramebufferSurface";
mConsumer->setConsumerName(mName);
mConsumer->setConsumerUsageBits(GRALLOC_USAGE_HW_FB |
GRALLOC_USAGE_HW_RENDER |
GRALLOC_USAGE_HW_COMPOSER);
mConsumer->setDefaultBufferFormat(mHwc.getFormat(disp));
mConsumer->setDefaultBufferSize(mHwc.getWidth(disp), mHwc.getHeight(disp));
mConsumer->setDefaultMaxBufferCount(NUM_FRAMEBUFFER_SURFACE_BUFFERS);
mConsumer->setMaxAcquiredBufferCount(NUM_FRAMEBUFFER_SURFACE_BUFFERS - 1);
}
status_t FramebufferSurface::beginFrame(bool /*mustRecompose*/) {
return NO_ERROR;
}
status_t FramebufferSurface::prepareFrame(CompositionType /*compositionType*/) {
return NO_ERROR;
}
status_t FramebufferSurface::advanceFrame() {
// Once we remove FB HAL support, we can call nextBuffer() from here
// instead of using onFrameAvailable(). No real benefit, except it'll be
// more like VirtualDisplaySurface.
return NO_ERROR;
}
status_t FramebufferSurface::nextBuffer(sp<GraphicBuffer>& outBuffer, sp<Fence>& outFence) {
Mutex::Autolock lock(mMutex);
BufferItem item;
status_t err = acquireBufferLocked(&item, 0);
if (err == BufferQueue::NO_BUFFER_AVAILABLE) {
outBuffer = mCurrentBuffer;
return NO_ERROR;
} else if (err != NO_ERROR) {
ALOGE("error acquiring buffer: %s (%d)", strerror(-err), err);
return err;
}
// If the BufferQueue has freed and reallocated a buffer in mCurrentSlot
// then we may have acquired the slot we already own. If we had released
// our current buffer before we call acquireBuffer then that release call
// would have returned STALE_BUFFER_SLOT, and we would have called
// freeBufferLocked on that slot. Because the buffer slot has already
// been overwritten with the new buffer all we have to do is skip the
// releaseBuffer call and we should be in the same state we'd be in if we
// had released the old buffer first.
if (mCurrentBufferSlot != BufferQueue::INVALID_BUFFER_SLOT &&
item.mBuf != mCurrentBufferSlot) {
// Release the previous buffer.
err = releaseBufferLocked(mCurrentBufferSlot, mCurrentBuffer,
EGL_NO_DISPLAY, EGL_NO_SYNC_KHR);
if (err < NO_ERROR) {
ALOGE("error releasing buffer: %s (%d)", strerror(-err), err);
return err;
}
}
mCurrentBufferSlot = item.mBuf;
mCurrentBuffer = mSlots[mCurrentBufferSlot].mGraphicBuffer;
outFence = item.mFence;
outBuffer = mCurrentBuffer;
return NO_ERROR;
}
// Overrides ConsumerBase::onFrameAvailable(), does not call base class impl.
void FramebufferSurface::onFrameAvailable(const BufferItem& /* item */) {
sp<GraphicBuffer> buf;
sp<Fence> acquireFence;
status_t err = nextBuffer(buf, acquireFence);
if (err != NO_ERROR) {
ALOGE("error latching nnext FramebufferSurface buffer: %s (%d)",
strerror(-err), err);
return;
}
err = mHwc.fbPost(mDisplayType, acquireFence, buf);
if (err != NO_ERROR) {
ALOGE("error posting framebuffer: %d", err);
}
}
void FramebufferSurface::freeBufferLocked(int slotIndex) {
ConsumerBase::freeBufferLocked(slotIndex);
if (slotIndex == mCurrentBufferSlot) {
mCurrentBufferSlot = BufferQueue::INVALID_BUFFER_SLOT;
}
}
void FramebufferSurface::onFrameCommitted() {
sp<Fence> fence = mHwc.getAndResetReleaseFence(mDisplayType);
if (fence->isValid() &&
mCurrentBufferSlot != BufferQueue::INVALID_BUFFER_SLOT) {
status_t err = addReleaseFence(mCurrentBufferSlot,
mCurrentBuffer, fence);
ALOGE_IF(err, "setReleaseFenceFd: failed to add the fence: %s (%d)",
strerror(-err), err);
}
}
status_t FramebufferSurface::compositionComplete()
{
return mHwc.fbCompositionComplete();
}
void FramebufferSurface::dumpAsString(String8& result) const {
ConsumerBase::dump(result);
}
void FramebufferSurface::dumpLocked(String8& result, const char* prefix) const
{
mHwc.fbDump(result);
ConsumerBase::dumpLocked(result, prefix);
}
// ----------------------------------------------------------------------------
}; // namespace android
// ----------------------------------------------------------------------------