/* * Copyright (C) 2007 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "LayerBuffer.h" #include "SurfaceFlinger.h" #include "DisplayHardware/DisplayHardware.h" namespace android { // --------------------------------------------------------------------------- gralloc_module_t const* LayerBuffer::sGrallocModule = 0; // --------------------------------------------------------------------------- LayerBuffer::LayerBuffer(SurfaceFlinger* flinger, DisplayID display, const sp& client, int32_t i) : LayerBaseClient(flinger, display, client, i), mNeedsBlending(false), mBlitEngine(0) { } LayerBuffer::~LayerBuffer() { if (mBlitEngine) { copybit_close(mBlitEngine); } } void LayerBuffer::onFirstRef() { LayerBaseClient::onFirstRef(); mSurface = new SurfaceLayerBuffer(mFlinger, clientIndex(), const_cast(this)); hw_module_t const* module = (hw_module_t const*)sGrallocModule; if (!module) { // NOTE: technically there is a race here, but it shouldn't // cause any problem since hw_get_module() always returns // the same value. if (hw_get_module(GRALLOC_HARDWARE_MODULE_ID, &module) == 0) { sGrallocModule = (gralloc_module_t const *)module; } } if (hw_get_module(COPYBIT_HARDWARE_MODULE_ID, &module) == 0) { copybit_open(module, &mBlitEngine); } } sp LayerBuffer::createSurface() const { return mSurface; } status_t LayerBuffer::ditch() { mSurface.clear(); return NO_ERROR; } bool LayerBuffer::needsBlending() const { return mNeedsBlending; } void LayerBuffer::setNeedsBlending(bool blending) { mNeedsBlending = blending; } void LayerBuffer::postBuffer(ssize_t offset) { sp source(getSource()); if (source != 0) source->postBuffer(offset); } void LayerBuffer::unregisterBuffers() { sp source(clearSource()); if (source != 0) source->unregisterBuffers(); } uint32_t LayerBuffer::doTransaction(uint32_t flags) { sp source(getSource()); if (source != 0) source->onTransaction(flags); uint32_t res = LayerBase::doTransaction(flags); // we always want filtering for these surfaces mNeedsFiltering = !(mFlags & DisplayHardware::SLOW_CONFIG); return res; } void LayerBuffer::unlockPageFlip(const Transform& planeTransform, Region& outDirtyRegion) { // this code-path must be as tight as possible, it's called each time // the screen is composited. sp source(getSource()); if (source != 0) source->onVisibilityResolved(planeTransform); LayerBase::unlockPageFlip(planeTransform, outDirtyRegion); } void LayerBuffer::onDraw(const Region& clip) const { sp source(getSource()); if (LIKELY(source != 0)) { source->onDraw(clip); } else { clearWithOpenGL(clip); } } void LayerBuffer::serverDestroy() { sp source(clearSource()); if (source != 0) { source->destroy(); } } /** * This creates a "buffer" source for this surface */ status_t LayerBuffer::registerBuffers(const ISurface::BufferHeap& buffers) { Mutex::Autolock _l(mLock); if (mSource != 0) return INVALID_OPERATION; sp source = new BufferSource(*this, buffers); status_t result = source->getStatus(); if (result == NO_ERROR) { mSource = source; } return result; } /** * This creates an "overlay" source for this surface */ sp LayerBuffer::createOverlay(uint32_t w, uint32_t h, int32_t f, int32_t orientation) { sp result; Mutex::Autolock _l(mLock); if (mSource != 0) return result; sp source = new OverlaySource(*this, &result, w, h, f, orientation); if (result != 0) { mSource = source; } return result; } sp LayerBuffer::getSource() const { Mutex::Autolock _l(mLock); return mSource; } sp LayerBuffer::clearSource() { sp source; Mutex::Autolock _l(mLock); source = mSource; mSource.clear(); return source; } // ============================================================================ // LayerBuffer::SurfaceLayerBuffer // ============================================================================ LayerBuffer::SurfaceLayerBuffer::SurfaceLayerBuffer(const sp& flinger, SurfaceID id, const sp& owner) : LayerBaseClient::Surface(flinger, id, owner->getIdentity(), owner) { } LayerBuffer::SurfaceLayerBuffer::~SurfaceLayerBuffer() { unregisterBuffers(); } status_t LayerBuffer::SurfaceLayerBuffer::registerBuffers( const ISurface::BufferHeap& buffers) { sp owner(getOwner()); if (owner != 0) return owner->registerBuffers(buffers); return NO_INIT; } void LayerBuffer::SurfaceLayerBuffer::postBuffer(ssize_t offset) { sp owner(getOwner()); if (owner != 0) owner->postBuffer(offset); } void LayerBuffer::SurfaceLayerBuffer::unregisterBuffers() { sp owner(getOwner()); if (owner != 0) owner->unregisterBuffers(); } sp LayerBuffer::SurfaceLayerBuffer::createOverlay( uint32_t w, uint32_t h, int32_t format, int32_t orientation) { sp result; sp owner(getOwner()); if (owner != 0) result = owner->createOverlay(w, h, format, orientation); return result; } // ============================================================================ // LayerBuffer::Buffer // ============================================================================ LayerBuffer::Buffer::Buffer(const ISurface::BufferHeap& buffers, ssize_t offset, size_t bufferSize) : mBufferHeap(buffers), mSupportsCopybit(false) { NativeBuffer& src(mNativeBuffer); src.crop.l = 0; src.crop.t = 0; src.crop.r = buffers.w; src.crop.b = buffers.h; src.img.w = buffers.hor_stride ?: buffers.w; src.img.h = buffers.ver_stride ?: buffers.h; src.img.format = buffers.format; src.img.base = (void*)(intptr_t(buffers.heap->base()) + offset); src.img.handle = 0; gralloc_module_t const * module = LayerBuffer::getGrallocModule(); if (module && module->perform) { int err = module->perform(module, GRALLOC_MODULE_PERFORM_CREATE_HANDLE_FROM_BUFFER, buffers.heap->heapID(), bufferSize, offset, buffers.heap->base(), &src.img.handle); // we can fail here is the passed buffer is purely software mSupportsCopybit = (err == NO_ERROR); } } LayerBuffer::Buffer::~Buffer() { NativeBuffer& src(mNativeBuffer); if (src.img.handle) { native_handle_delete(src.img.handle); } } // ============================================================================ // LayerBuffer::Source // LayerBuffer::BufferSource // LayerBuffer::OverlaySource // ============================================================================ LayerBuffer::Source::Source(LayerBuffer& layer) : mLayer(layer) { } LayerBuffer::Source::~Source() { } void LayerBuffer::Source::onDraw(const Region& clip) const { } void LayerBuffer::Source::onTransaction(uint32_t flags) { } void LayerBuffer::Source::onVisibilityResolved( const Transform& planeTransform) { } void LayerBuffer::Source::postBuffer(ssize_t offset) { } void LayerBuffer::Source::unregisterBuffers() { } // --------------------------------------------------------------------------- LayerBuffer::BufferSource::BufferSource(LayerBuffer& layer, const ISurface::BufferHeap& buffers) : Source(layer), mStatus(NO_ERROR), mBufferSize(0), mTextureManager(layer.mFlags) { if (buffers.heap == NULL) { // this is allowed, but in this case, it is illegal to receive // postBuffer(). The surface just erases the framebuffer with // fully transparent pixels. mBufferHeap = buffers; mLayer.setNeedsBlending(false); return; } status_t err = (buffers.heap->heapID() >= 0) ? NO_ERROR : NO_INIT; if (err != NO_ERROR) { LOGE("LayerBuffer::BufferSource: invalid heap (%s)", strerror(err)); mStatus = err; return; } PixelFormatInfo info; err = getPixelFormatInfo(buffers.format, &info); if (err != NO_ERROR) { LOGE("LayerBuffer::BufferSource: invalid format %d (%s)", buffers.format, strerror(err)); mStatus = err; return; } if (buffers.hor_stride<0 || buffers.ver_stride<0) { LOGE("LayerBuffer::BufferSource: invalid parameters " "(w=%d, h=%d, xs=%d, ys=%d)", buffers.w, buffers.h, buffers.hor_stride, buffers.ver_stride); mStatus = BAD_VALUE; return; } mBufferHeap = buffers; mLayer.setNeedsBlending((info.h_alpha - info.l_alpha) > 0); mBufferSize = info.getScanlineSize(buffers.hor_stride)*buffers.ver_stride; mLayer.forceVisibilityTransaction(); } LayerBuffer::BufferSource::~BufferSource() { class MessageDestroyTexture : public MessageBase { SurfaceFlinger* flinger; GLuint name; public: MessageDestroyTexture( SurfaceFlinger* flinger, GLuint name) : flinger(flinger), name(name) { } virtual bool handler() { glDeleteTextures(1, &name); return true; } }; if (mTexture.name != -1U) { // GL textures can only be destroyed from the GL thread mLayer.mFlinger->mEventQueue.postMessage( new MessageDestroyTexture(mLayer.mFlinger.get(), mTexture.name) ); } if (mTexture.image != EGL_NO_IMAGE_KHR) { EGLDisplay dpy(mLayer.mFlinger->graphicPlane(0).getEGLDisplay()); eglDestroyImageKHR(dpy, mTexture.image); } } void LayerBuffer::BufferSource::postBuffer(ssize_t offset) { ISurface::BufferHeap buffers; { // scope for the lock Mutex::Autolock _l(mBufferSourceLock); buffers = mBufferHeap; if (buffers.heap != 0) { const size_t memorySize = buffers.heap->getSize(); if ((size_t(offset) + mBufferSize) > memorySize) { LOGE("LayerBuffer::BufferSource::postBuffer() " "invalid buffer (offset=%d, size=%d, heap-size=%d", int(offset), int(mBufferSize), int(memorySize)); return; } } } sp buffer; if (buffers.heap != 0) { buffer = new LayerBuffer::Buffer(buffers, offset, mBufferSize); if (buffer->getStatus() != NO_ERROR) buffer.clear(); setBuffer(buffer); mLayer.invalidate(); } } void LayerBuffer::BufferSource::unregisterBuffers() { Mutex::Autolock _l(mBufferSourceLock); mBufferHeap.heap.clear(); mBuffer.clear(); mLayer.invalidate(); } sp LayerBuffer::BufferSource::getBuffer() const { Mutex::Autolock _l(mBufferSourceLock); return mBuffer; } void LayerBuffer::BufferSource::setBuffer(const sp& buffer) { Mutex::Autolock _l(mBufferSourceLock); mBuffer = buffer; } void LayerBuffer::BufferSource::onDraw(const Region& clip) const { sp ourBuffer(getBuffer()); if (UNLIKELY(ourBuffer == 0)) { // nothing to do, we don't have a buffer mLayer.clearWithOpenGL(clip); return; } status_t err = NO_ERROR; NativeBuffer src(ourBuffer->getBuffer()); const Rect transformedBounds(mLayer.getTransformedBounds()); #if defined(EGL_ANDROID_image_native_buffer) if (mLayer.mFlags & DisplayHardware::DIRECT_TEXTURE) { err = INVALID_OPERATION; if (ourBuffer->supportsCopybit()) { copybit_device_t* copybit = mLayer.mBlitEngine; if (copybit && err != NO_ERROR) { // create our EGLImageKHR the first time err = initTempBuffer(); if (err == NO_ERROR) { // NOTE: Assume the buffer is allocated with the proper USAGE flags const NativeBuffer& dst(mTempBuffer); region_iterator clip(Region(Rect(dst.crop.r, dst.crop.b))); copybit->set_parameter(copybit, COPYBIT_TRANSFORM, 0); copybit->set_parameter(copybit, COPYBIT_PLANE_ALPHA, 0xFF); copybit->set_parameter(copybit, COPYBIT_DITHER, COPYBIT_ENABLE); err = copybit->stretch(copybit, &dst.img, &src.img, &dst.crop, &src.crop, &clip); if (err != NO_ERROR) { clearTempBufferImage(); } } } } } #endif else { err = INVALID_OPERATION; } if (err != NO_ERROR) { // slower fallback GGLSurface t; t.version = sizeof(GGLSurface); t.width = src.crop.r; t.height = src.crop.b; t.stride = src.img.w; t.vstride= src.img.h; t.format = src.img.format; t.data = (GGLubyte*)src.img.base; const Region dirty(Rect(t.width, t.height)); mTextureManager.loadTexture(&mTexture, dirty, t); } mTexture.transform = mBufferHeap.transform; mLayer.drawWithOpenGL(clip, mTexture); } status_t LayerBuffer::BufferSource::initTempBuffer() const { // figure out the size we need now const ISurface::BufferHeap& buffers(mBufferHeap); uint32_t w = mLayer.mTransformedBounds.width(); uint32_t h = mLayer.mTransformedBounds.height(); if (buffers.w * h != buffers.h * w) { int t = w; w = h; h = t; } // we're in the copybit case, so make sure we can handle this blit // we don't have to keep the aspect ratio here copybit_device_t* copybit = mLayer.mBlitEngine; const int down = copybit->get(copybit, COPYBIT_MINIFICATION_LIMIT); const int up = copybit->get(copybit, COPYBIT_MAGNIFICATION_LIMIT); if (buffers.w > w*down) w = buffers.w / down; else if (w > buffers.w*up) w = buffers.w*up; if (buffers.h > h*down) h = buffers.h / down; else if (h > buffers.h*up) h = buffers.h*up; if (mTexture.image != EGL_NO_IMAGE_KHR) { // we have an EGLImage, make sure the needed size didn't change if (w!=mTexture.width || h!= mTexture.height) { // delete the EGLImage and texture clearTempBufferImage(); } else { // we're good, we have an EGLImageKHR and it's (still) the // right size return NO_ERROR; } } // figure out if we need linear filtering if (buffers.w * h == buffers.h * w) { // same pixel area, don't use filtering mLayer.mNeedsFiltering = false; } // Allocate a temporary buffer and create the corresponding EGLImageKHR // once the EGLImage has been created we don't need the // graphic buffer reference anymore. sp buffer = new GraphicBuffer( w, h, HAL_PIXEL_FORMAT_RGB_565, GraphicBuffer::USAGE_HW_TEXTURE | GraphicBuffer::USAGE_HW_2D); status_t err = buffer->initCheck(); if (err == NO_ERROR) { NativeBuffer& dst(mTempBuffer); dst.img.w = buffer->getStride(); dst.img.h = h; dst.img.format = buffer->getPixelFormat(); dst.img.handle = (native_handle_t *)buffer->handle; dst.img.base = 0; dst.crop.l = 0; dst.crop.t = 0; dst.crop.r = w; dst.crop.b = h; EGLDisplay dpy(mLayer.mFlinger->graphicPlane(0).getEGLDisplay()); err = mTextureManager.initEglImage(&mTexture, dpy, buffer); } return err; } void LayerBuffer::BufferSource::clearTempBufferImage() const { // delete the image EGLDisplay dpy(mLayer.mFlinger->graphicPlane(0).getEGLDisplay()); eglDestroyImageKHR(dpy, mTexture.image); // and the associated texture (recreate a name) glDeleteTextures(1, &mTexture.name); Texture defaultTexture; mTexture = defaultTexture; } // --------------------------------------------------------------------------- LayerBuffer::OverlaySource::OverlaySource(LayerBuffer& layer, sp* overlayRef, uint32_t w, uint32_t h, int32_t format, int32_t orientation) : Source(layer), mVisibilityChanged(false), mOverlay(0), mOverlayHandle(0), mOverlayDevice(0), mOrientation(orientation) { overlay_control_device_t* overlay_dev = mLayer.mFlinger->getOverlayEngine(); if (overlay_dev == NULL) { // overlays not supported return; } mOverlayDevice = overlay_dev; overlay_t* overlay = overlay_dev->createOverlay(overlay_dev, w, h, format); if (overlay == NULL) { // couldn't create the overlay (no memory? no more overlays?) return; } // enable dithering... overlay_dev->setParameter(overlay_dev, overlay, OVERLAY_DITHER, OVERLAY_ENABLE); mOverlay = overlay; mWidth = overlay->w; mHeight = overlay->h; mFormat = overlay->format; mWidthStride = overlay->w_stride; mHeightStride = overlay->h_stride; mInitialized = false; mOverlayHandle = overlay->getHandleRef(overlay); sp channel = new OverlayChannel( &layer ); *overlayRef = new OverlayRef(mOverlayHandle, channel, mWidth, mHeight, mFormat, mWidthStride, mHeightStride); mLayer.mFlinger->signalEvent(); } LayerBuffer::OverlaySource::~OverlaySource() { if (mOverlay && mOverlayDevice) { overlay_control_device_t* overlay_dev = mOverlayDevice; overlay_dev->destroyOverlay(overlay_dev, mOverlay); } } void LayerBuffer::OverlaySource::onDraw(const Region& clip) const { // this would be where the color-key would be set, should we need it. GLclampf red = 0; GLclampf green = 0; GLclampf blue = 0; mLayer.clearWithOpenGL(clip, red, green, blue, 0); } void LayerBuffer::OverlaySource::onTransaction(uint32_t flags) { const Layer::State& front(mLayer.drawingState()); const Layer::State& temp(mLayer.currentState()); if (temp.sequence != front.sequence) { mVisibilityChanged = true; } } void LayerBuffer::OverlaySource::onVisibilityResolved( const Transform& planeTransform) { // this code-path must be as tight as possible, it's called each time // the screen is composited. if (UNLIKELY(mOverlay != 0)) { if (mVisibilityChanged || !mInitialized) { mVisibilityChanged = false; mInitialized = true; const Rect bounds(mLayer.getTransformedBounds()); int x = bounds.left; int y = bounds.top; int w = bounds.width(); int h = bounds.height(); // we need a lock here to protect "destroy" Mutex::Autolock _l(mOverlaySourceLock); if (mOverlay) { overlay_control_device_t* overlay_dev = mOverlayDevice; overlay_dev->setPosition(overlay_dev, mOverlay, x,y,w,h); // we need to combine the layer orientation and the // user-requested orientation. Transform finalTransform = Transform(mOrientation) * Transform(mLayer.getOrientation()); overlay_dev->setParameter(overlay_dev, mOverlay, OVERLAY_TRANSFORM, finalTransform.getOrientation()); overlay_dev->commit(overlay_dev, mOverlay); } } } } void LayerBuffer::OverlaySource::destroy() { // we need a lock here to protect "onVisibilityResolved" Mutex::Autolock _l(mOverlaySourceLock); if (mOverlay && mOverlayDevice) { overlay_control_device_t* overlay_dev = mOverlayDevice; overlay_dev->destroyOverlay(overlay_dev, mOverlay); mOverlay = 0; } } // --------------------------------------------------------------------------- }; // namespace android