Use EGLImageKHR instead of copybit directly.
We now have the basis to use streaming YUV textures (well, in fact
we already are). When/if we use the GPU instead of the MDP we'll
need to make sure it supports the appropriate YUV format.
Also make sure we compile if EGL_ANDROID_image_native_buffer is not supported
This also fixes [2152536] ANR in browser
When SF is enqueuing buffers faster than SF dequeues them.
The update flag in SF is not counted and under some situations SF will only
dequeue the first buffer. The state at this point is not technically
corrupted, it's valid, but just delayed by one buffer.
In the case of the Browser ANR, because the last enqueued buffer was delayed
the resizing of the current buffer couldn't happen.
The system would always fall back onto its feet if anything -else- in
tried to draw, because the "late" buffer would be picked up then.
A window is created and the browser is about to render into it the
very first time, at that point it does an IPC to SF to request a new
buffer. Meanwhile, the window manager removes that window from the
list and the shared memory block it uses is marked as invalid.
However, at that point, another window is created and is given the
same index (that just go freed), but a different identity and resets
the "invalid" bit in the shared block. When we go back to the buffer
allocation code, we're stuck because the surface we're allocating for
is gone and we don't detect it's invalid because the invalid bit has
been reset.
It is not sufficient to check for the invalid bit, I should
also check that identities match.
When EGLImage extension is not available, SurfaceFlinger will fallback to using
glTexImage2D and glTexSubImage2D instead, which requires 50% more memory and an
extra copy. However this code path has never been exercised and had some bugs
which this patch fix.
Mainly the scale factor wasn't computed right when falling back on glDrawElements.
We also fallback to this mode of operation if a buffer doesn't have the adequate
usage bits for EGLImage usage.
This changes only code that is currently not executed. Some refactoring was needed to
keep the change clean. This doesn't change anything functionaly.
The ANR is caused by SurfaceFlinger waiting for buffers of a removed surface to become availlable.
When it is removed from the current list, a Surface is marked as NO_INIT, which causes SF to return
immediately in the above case. For some reason, the surface here wasn't marked as NO_INIT.
This change makes the code more robust by always (irregadless or errors) setting the NO_INIT status
in all code paths where a surface is removed from the list.
Additionaly added more information in the logs, should this happen again.
a new method, compostionComplete() is added to the framebuffer hal, it is used by surfaceflinger to signal the driver that the composition is complete, BEFORE it releases its client. This gives a chance to the driver to
This implements support for devices whose hardware can hide
their navigation keys. It works much like the existing keyboardHidden
configuration, and for compatibility uses the same configuration
change bit.
Also add FLAG_TURN_ON_SCREEN for windows, which has the system
cause the screen to be turned on when the window is displayed.
Great fun when used with FLAG_SHOW_WHEN_LOCKED!
Change-Id: I0b867f19af85cfd8786a14cea194b34f7bdd9b7a
Take 2. We needed to check that the usage flags are "good enough" as opposed to "the same".
This reverts commit 8f17a762fe9e9f31e4e86cb60ff2bfb6b10fdee6.
we could have several thread waiting on the condition and they all need to wake-up.
also added a debug "mTid" field in the class, which contains the tid of the thread (as opposed to pthread_t), this
is useful when debugging under gdb for instance.
Rewrote SurfaceFlinger's buffer management from the ground-up.
The design now support an arbitrary number of buffers per surface, however the current implementation is limited to four. Currently only 2 buffers are used in practice.
The main new feature is to be able to dequeue all buffers at once (very important when there are only two).
A client can dequeue all buffers until there are none available, it can lock all buffers except the last one that is used for composition. The client will block then, until a new buffer is enqueued.
The current implementation requires that buffers are locked in the same order they are dequeued and enqueued in the same order they are locked. Only one buffer can be locked at a time.
eg. Allowed sequence: DQ, DQ, LOCK, Q, LOCK, Q
eg. Forbidden sequence: DQ, DQ, LOCK, LOCK, Q, Q
what happened is that the efective pixel format is calculated by SF but Surface nevew had access to it directly.
in particular this caused query(FORMAT) to return the requested format instead of the effective format.
This change makes SurfaceHolder.setType(GPU) obsolete (it's now ignored).
Added an API to android_native_window_t to allow extending the functionality without ever breaking binary compatibility. This is used to implement the new set_usage() API. This API needs to be called by software renderers because the default is to use usage flags suitable for h/w.
* changes:
update most gl tests to use EGLUtils
added two EGL helpers for selecting a config matching a certain pixelformat or native window type
added NATIVE_WINDOW_FORMAT attribute to android_native_window_t
The major things going on here:
- The MotionEvent API is now extended to included "pointer ID" information, for
applications to keep track of individual fingers as they move up and down.
PointerLocation has been updated to take advantage of this.
- The input system now has logic to generate MotionEvents with the new ID
information, synthesizing an identifier as new points are down and trying to
keep pointer ids consistent across events by looking at the distance between
the last and next set of pointers.
- We now support the new multitouch driver protocol, and will use that instead
of the old one if it is available. We do NOT use any finger id information
coming from the driver, but always synthesize pointer ids in user space.
(This is simply because we don't yet have a driver reporting this information
from which to base an implementation on.)
- Increase maximum number of fingers to 10. This code has only been used
with a driver that reports up to 2, so no idea how more will actually work.
- Oh and the input system can now detect and report physical DPAD devices.
there was several issues:
- when a surface was made non-current, the last frame wasn't shown and the buffer could stay locked
- when a surface was made current the 2nd time, it would not dequeue a new buffer
now, queue/dequeue are done when the surface is made current.
for this to work, a new query() hook had to be added on android_native_window_t, it allows to retrieve some attributes of a window (currently only width and height).
It turns out we were not returning the density for anything retrieved from a
TypedArray... which basically means any bitmap references from a layout or style...!!!
This is now fixed.
Also fiddle with the density compatibility mode to turn on smoothing in certain situations,
helping the look of things when they need to scale and we couldn't do the scaling at
load time.
Initial commit for review.
Integrated comments after patch set 1 review.
Fixed lockup in AudioFlinger::ThreadBase::exit()
Fixed lockup when playing tone with AudioPlocyService startTone()
This changes the names of the directories in aapt, to what you see
in the list of DpiTest resources. Also adds a new "long" configuration
for wide screens, which the platform sets appropriate, and introduces
a new kind of resizeability for not large but significantly larger
than normal screens which may have compatibility issues.
MemoryDealer, like all other subclasses of RefBase,MUST NOT BE stack-allocated, a protected destructor prohibits stack-allocation while allowing the baseclass to properly invoke the subclass' destructor once the refcount drops to 0.
This will be used to avoid unnecessarily listening to data from sensors
that function as event devices.
Signed-off-by: Mike Lockwood <lockwood@android.com>
The kernel can now publish a property describing the layout of virtual
hardware buttons on the touchscreen. These outside of the display
area (outside of the absolute x and y controller range the driver
reports), and when the user presses on them a key event will be
generated rather than a touch event.
This also includes a number of tweaks to the absolute controller
processing to make things work better on the new screens. For
example, we now reject down events outside of the display area.
Still left to be done is the ability to cancel a key down event,
so the user can slide up from the virtual keys to the touch screen
without causing a virtual key to execute.
Merge commit '8a715b4b791db4390d12e0ded02280592634a424'
* commit '8a715b4b791db4390d12e0ded02280592634a424':
Add useful functions to String8, which enables users to convert between UTF-8 and UTF-32
* changes:
Add useful functions to String8, which enables users to convert between UTF-8 and UTF-32 It will be used in SQL functions in external/sqlite/android. See https://android-git.corp.google.com/g/Gerrit#change,5511 for example.
Merge commit '991eec03a73f8803d0f8c80b418480ea25293cfb'
* commit '991eec03a73f8803d0f8c80b418480ea25293cfb':
Don't re-parse the framework resources all the time.
A small optimization to the resource code, to not re-parse the framework
resources every time we build a new AssetManager. Instead, you can now
construct a ResTable from a previously created one... of course, like the
existing code for using the data in-place, you can't delete the original
ResTable until you have deleted the one that has been constructed from it.
Merge commit 'c7396025e59524e7ef639fd86fc23123939ee91c'
* commit 'c7396025e59524e7ef639fd86fc23123939ee91c':
Return CAMERA_ERROR_SERVER_DIED to camera app when camera service dies (bug 1956726)
Merge commit 'bd9aa793b19f7aa529ca4123492f8940b96486b8'
* commit 'bd9aa793b19f7aa529ca4123492f8940b96486b8':
Add in TTS engine interface the methods to query the availability for a language,
It turns out this was not a problem in the resource code at all. Rather,
the system process has a cache of pre-loaded attributes it uses to avoid
continually reloading things as it needs them. Well it turns out this
cache wasn't flushed after a package was uninstalled or a configuration
changed, so you could re-install an app where you change its style resources
so its theme now points to one that is inconsistent in the cache.
This is mostly a problem for developers, where they continually install
new versions of an app where resources have changed. This could possibly
show up when updating an app on a normal phone, although the problem would
eventually correct itself since this cache uses weak references.
Anyway, the cache is now reworked to be flushed appropriately.
This change also includes an update to aapt to be able to dump the
contents of bags in resources.
Merge commit '17a80081a42410f541a220ab7e6afc64fc6cc399'
* commit '17a80081a42410f541a220ab7e6afc64fc6cc399':
Pipe all the camera callbacks to Java to facilitate the addition
Merge commit '72eb0acad5cffc57ce5006f6deab29ee259e461e'
* commit '72eb0acad5cffc57ce5006f6deab29ee259e461e':
Expand support for different screen sizes.
* changes:
Add in TTS engine interface the methods to query the availability for a language, to set the synthesis audio format, to query the current language, country and variant setting.
* changes:
Pipe all the camera callbacks to Java to facilitate the addition of new features. This will make it easy to add things like zoom callbacks without modifying the entire camera stack. Bug 1837832.
Applications can now declare that they support small, normal, or
large screens. Resource selection can also be done based on these
sizes. By default, pre-Donut apps are false for small and large,
and Donut or later apps are assumed to support all sizes. In either
case they can use <supports-screens> in their manifest to declare
what they actually support.
Merge commit 'b65dba4560f7aff894ebcdbe8468daeaae3489c8'
* commit 'b65dba4560f7aff894ebcdbe8468daeaae3489c8':
Use the same interface in the TTS engine interface for setLanguage and loadLanguage.
Merge commit 'c44989d6c7bcc761fb37f54fd37aac2070ba8e5e'
* commit 'c44989d6c7bcc761fb37f54fd37aac2070ba8e5e':
move ui/Time.cpp to core/jni, since this is the only place it is used
Merge commit 'df65b60ce33e5a56815864f8f0713e25378fa649'
* commit 'df65b60ce33e5a56815864f8f0713e25378fa649':
Only report "unknown metadata" once per restore helper
Merge commit 'a93466f5ca41c2ba6c3524c8d1edc2138bf753e3'
* commit 'a93466f5ca41c2ba6c3524c8d1edc2138bf753e3':
Cleanup header file. Disallow copy of Camera object by making copy
Merge commit '3d7b8d1aa6a362292f56defbe8fb2d5653f79282'
* commit '3d7b8d1aa6a362292f56defbe8fb2d5653f79282':
Use a ref-counted callback interface for Camera.
This allows the camera service to hang onto the callback interface
until all callbacks have been processed. This prevents problems
where pending callbacks in binder worker threads are processed
after the Java camera object and its associated native resources
have been released.
Bug 1884362
Merge commit '11b157790234d3d2f116ce4c7ed1d3d00fb78bc3'
* commit '11b157790234d3d2f116ce4c7ed1d3d00fb78bc3':
Add file mode to the file-backup saved state blobs
This change puts the file's access mode into the saved-state blob used by the
file backup helpers. The tests have been updated for the new blob content
format.
What this change *doesn't* do is actually backup/restore the file mode. This
change is a prerequisite for that, but mode preservation in backup/restore will
require adding metadata to the backup data stream itself, so will be approached
a bit more carefully.
(Also fixed one outright bug in the test program: ReadEntityData() had been
changed to return a ssize_t union of either a byte-count or a negative number
indicating error, but the test program was still assuming that nonzero == error,
and was spuriously failing.)
Merge commit '72be40490951d3f9d0ada16fcf5288d0c3306d88'
* commit '72be40490951d3f9d0ada16fcf5288d0c3306d88':
fix warnings that will show up with GCC 4.4 (in master)
Merge commit '1585bd24c10d16351f89e32dddbfa799f18db6bd'
* commit '1585bd24c10d16351f89e32dddbfa799f18db6bd':
Report densities in badging, debugging for nine patch bug.
The aapt tool now reports all available densities like it already did
for locales. Also this includes more resource data output, which I
was using to examine bug #1867049 (which at this point I am unable to
reproduce).
Merge commit '16ce3504c5bf98d95d5c36001f755bb4b15253c9'
* commit '16ce3504c5bf98d95d5c36001f755bb4b15253c9':
Make RestoreHelper and friends also write out the snapshot state.
Merge commit 'f1170fb5386ea86d704480d321ee9d1ee4858244'
* commit 'f1170fb5386ea86d704480d321ee9d1ee4858244':
Updating TTS engine interface for setting the language based on language, country and variant codes
Merge commit '78f0f8cb2efe9410127c39201e240f6d438eb53c'
* commit '78f0f8cb2efe9410127c39201e240f6d438eb53c':
Make the file backup helper not crash if a file you requested
Fix SharedPrefsBackupHelper so it doesn't hard code the paths to the files.
Merge commit 'e3523054ded8c6e86935a978aa136c3ed2c0ba12'
* commit 'e3523054ded8c6e86935a978aa136c3ed2c0ba12':
Cleaning up comments in interface for TTS engines.
Merge commit '327da854e8fbc444150b40941668b3c9187c34b9'
* commit '327da854e8fbc444150b40941668b3c9187c34b9':
Updating TtsEngine.h and SynthProxy.cpp so that buffer memory
