this means they only have access to the consumer end of
the interface. we had a lot of code that assumed consumers
where holding a BufferQueue (i.e.: both ends), so most of
this change is untangling in fix that
Bug: 9265647
Change-Id: Ic2e2596ee14c7535f51bf26d9a897a0fc036d22c
While currently untested, this should allow to move the
BuffereQueue in the consumer process and have everything
work as usual.
Bug: 9265647
Change-Id: I9ca8f099f7c65b9a27b7e7a3643b46d1b58eacfc
we can now queue/dequeue a buffer in asynchrnous mode by using the
async parameter to these calls. async mode is only specified
with those calls (it is not modal anymore).
as a consequence it can only be specified when the buffer count
is not overidden, as error is returned otherwise.
Change-Id: Ic63f4f96f671cb9d65c4cecbcc192615e09a8b6b
we tag queued buffers with the "bufferqueue cannot block" flag
and use that bit to discard a buffer in the queue by new ones
comming in. this allows us to remove the buffer queue drain in
disconnect while maintaining the right behaviour if it gets
connected again (since each buffer remembers how it was enqueued).
Change-Id: I1e703d363a687b70b19ba49cef32213116e8bd3f
this is the first step of a series of improvements to
BufferQueue. A few things happen in this change:
- setSynchronousMode() goes away as well as the SynchronousModeAllowed flag
- BufferQueue now defaults to (what used to be) synchronous mode
- a new "controlled by app" flag is passed when creating consumers and producers
those flags are used to put the BufferQueue in a mode where it
will never block if both flags are set. This is achieved by:
- returning an error from dequeueBuffer() if it would block
- making sure a buffer is always available by replacing
the previous buffer with the new one in queueBuffer()
(note: this is similar to what asynchrnous mode used to be)
Note: in this change EGL's swap-interval 0 is broken; this will be
fixed in another change.
Change-Id: I691f9507d6e2e158287e3039f2a79a4d4434211d
When acquiring a buffer, SurfaceFlinger now computes the expected
presentation time and passes it to the BufferQueue acquireBuffer()
method. If it's not yet time to display the buffer, acquireBuffer()
returns PRESENT_LATER instead of a buffer.
The current implementation of the expected-present-time computation
uses approximations and guesswork.
Bug 7900302
Change-Id: If9345611c5983a11a811935aaf27d6388a5036f1
This change fixes how the MultiTextureConsumerTest.EGLImageTargetWorks checks
for pixels. It removes the call to eglSwapBuffers so that the test does not
rely on EGL swap-preserve behavior, and it makes the test use checkPixel()
rather than doing glReadPixels itself.
Bug: 8349336
Change-Id: I0f446a0083eebd07af6fd208762878b4e367725a
This change increases the pixel difference tolerance of the
SurfaceTextureGLTest.TexturingFromCpuFilledYV12BufferNpot test from 2 to 3.
Bug: 8349135
Change-Id: I82e361a689335f49065cacd8a3fc145d67b125f1
This moves the call to ConsumerBase::abandon from the ConsumerBase dtor to
ConsumerBase::onLastStrongRef. The abandon call relies on virtual methods to
perform the clean-up, so calling it from the ConsumerBase dtor after the
derived classes dtors ran was skipping some of the clean-up. The
onLastStrongRef method should get called just before the most derived class's
dtor gets called.
Bug: 8349135
Change-Id: I836946826927cc1ed69c049049f525f92b17a269
we check that the order in which we destroy GLConsumer wrt.
releasing the corresponding EGLSurface via eglMake(Un)Current
doesn't leak a buffer.
On at least 2 devices this test doesn't pass.
Change-Id: I63ab83951b4b0a977f38571158f948cbd9dc7cec
We check that calling eglSwapBuffers() on an abandonned BufferQueue
return EGL_BAD_SURFACE -- this is to ensure consistancy between
drivers.
Change-Id: Ibb548e0cf767ceee69f2fc4a85811d15a6522277
This change eliminates the uses of a NULL sp<Fence> indicating that no waiting
is required. Instead we use a non-NULL but invalid Fence object for which the
wait methods will return immediately.
Bug: 7892871
Change-Id: I5360aebe3090422ef6920d56c99fc4eedc642e48
The C++ class names don't match what the classes do, so rename
ISurfaceTexture to IGraphicBufferProducer, and SurfaceTexture to
GLConsumer.
Bug 7736700
Change-Id: Ia03e468888025b5cae3c0ee1995434515dbea387
This change adds some infrastructure for testing the BufferQueue class. It
also includes a test that tests the new check in BufferQueue::acquireBuffer
that prevents the consumer from acquiring more than one buffer beyond the max
acquired buffer count that was set.
Change-Id: I38554ad3f9a53d2ddeba7ef0deee35ec2e2f9775
This change disables the CpuConsumer tests because they require a Gralloc
format that is not supported on all devices.
Change-Id: Ifaa618062c1dae53d9fcb9e16ba92c480d3dbd0c
This change is a clean up of some of the handling of the maximum number of
buffers that are allowed at once. It mostly renames a few member variables and
methods, but it includes a couple small refactorings.
Change-Id: I9959310f563d09583548d4291e1050a7bbc7d87d
Use only display tokens in the API to refer to new displays.
Don't require the caller to specify the display when creating
a surface (since in general a surface could be shown on
any display).
This is intended to be a minimum change just to update the API.
Note that SurfaceFlinger still uses DisplayID in a few places
internally that might cause some features not to work properly
when there are multiple displays (LayerScreenshot, for example).
Change-Id: I3d91eec2da406eefd97bcd53655d403ad865a7e6
This change updates the uses of ANativeWindow to use the new ANW functions that
accept and return Sync HAL fence file descriptors.
Change-Id: I3ca648b6ac33f7360e86754f924aa072f95242f6
SurfaceTexture would only create an EGLImage for a buffer slot when
BufferQueue returns a GraphicBuffer, i.e. either the slot was acquired
for the first time ever, or the buffer for the slot was reallocated.
But the EGLImage may also need to be re-created for a
previously-acquired buffer if the slot's EGLImage was destroyed during
detachFromContext(); in this case BufferQueue won't return a
GraphicBuffer since SurfaceTexture already has a reference to the
correct buffer.
Bug: 6461693
Change-Id: Ib95d0d757192efe336c5fda0866f857481a6617d
Aimed for use cases where gralloc buffers need to be consumed by CPU
users, such as camera image data streams.
The CpuConsumer is a synchronous queue, which exposes raw pointers to
the underlying graphics buffers to applications. Multiple buffers may
be acquired at once, up to the limit set at time of construction.
Change-Id: If1d99f12471438e95a69696e40685948778055fd
This change removes the setPostTransformCrop function from
SurfaceTextureClient. It also includes a small logging fix in BufferQueue.
Bug: 6299171
Change-Id: Ifd0ed05b95dad6085e7a8267fda4d69b76ea3bad
This change adds support for specifying a crop rectangle to a
SurfaceTextureClient that is in post-transformed coordinate space.
Change-Id: I247901de343e71b32850f7ae3bac62dfa612ad3d
Bug: 6299171
This change adds the plumbing to SurfaceTextureClient, BufferQueue, and
SurfaceTexture to get the active rectangle passed to the ANativeWindow to
the buffer consumer.
Change-Id: I35da0889b266327ebb079b6a7136fa3e2e8b00e6
This change makes SurfaceTexture include an offset for all sides of the crop
region when cropping. This keeps the image centered, to minimize the visual
changes when switching between the texture transform matrix-based cropping and
something that does proper cropping (e.g. HWComposer).
Change-Id: I541d3046fd92e49221b488444df36d490924d1c5
SurfaceTexture will modify the crop rect so it matches
the desired output aspect ratio when the scaling
mode is NATIVE_WINDOW_SCALING_MODE_CROP. Added a test
for this new scaling mode.
Change-Id: I60f24dcbc294b65cd10a393d9e27d40f07d27bb6
BufferQueue's disconnect could race with updateTexImage
where invalid buffers could be released. Additionally
fixed similar bug with setBufferCount. Tests were added
to stress the disconnect mechanism.
Change-Id: I9afa4c64f3e025984e8a9e8d924852a71d044716
This change adds the detachFromContext and attachToContext methods to
SurfaceTexture. These methods allow the SurfaceTexture to switch from
one consumer GLES context to another. This change also includes a few
cleanups to the error return codes in updateTexImage.
Change-Id: I0df1eb599aa7b6f58f07431f242f8f09269559ed
pdk builds don't have libandroid.so available. Remove it from
projects that aren't actually using it.
Change-Id: I100dc84aaf8160c1062a122ef6d5aec0534d73fa
This change adds a check to SurfaceTexture::updateTexImage to verify
that the current GL context is the same as the one that was used for
previous updateTexImage calls.
Change-Id: If02d2f787bcfdb528046dc9ddf6665f8a90e1bf4
