EGLUtils::selectConfigForPixelFormat() now uses EGL_NATIVE_VISUAL_ID
to select a config with the proper format. this is more robust and
future proof.
Change-Id: Ib85e0974160945d838956b50a3cac4de78618957
Two of the cases in the ISurfaceComposer onTransact switch statement
were missing 'break' statements at the end, and would fall through to
the next case block. This change adds those break statements.
Change-Id: I6dcc84263d3ea03d94612c667103283846b3dee1
Adds a new virtualKeyQuietTimeMillis configuration resource that sets
the duration for which virtual keys will be dropped after recent touches
on screen. The default value is 0; it is intended to be overridden
per device using a resource overlay.
This change is designed to help in two cases:
1. Swipes from touchscreen into virtual key area.
2. Accidental taps in virtual key area while using on-screen keyboard.
Bug: 3089163
Change-Id: Id6733c83c2e2bc8d9553aa0e5c1fd74b741bec6e
The cause of the problem is that AudioTrack::start() can fail if it is called from a newly created
thread that has the same ID as the AudioTrack callback thread that has just been stopped and not yet exited.
This is possible as the thread ID used by the Thread class is not the TID.
The fix consists in clearing the thread ID before exiting the thread loop.
Change-Id: I66e679665c384403cb3ba2c31746f5de72d5836d
Rewrote interceptKeyBeforeQueueing to make the handling more systematic.
Behavior should be identical except:
- We never pass keys to applications when the screen is off and the keyguard
is not showing (the proximity sensor turned off the screen).
Previously we passed all non-wake keys through in this case which
caused a bug on Crespo where the screen would come back on if a soft key
was held at the time of power off because the resulting key up event
would sneak in just before the keyguard was shown. It would then be
passed through to the dispatcher which would poke user activity and
wake up the screen.
- We propagate the key flags when broadcasting media keys which
ensures that recipients can tell when the key is canceled.
- We ignore endcall or power if canceled (shouldn't happen anyways).
Changed the input dispatcher to not poke user activity for canceled
events since they are synthetic and should not wake the device.
Changed the lock screen so that it does not poke the wake lock when the
grab handle is released. This fixes a bug where the screen would come
back on immediately if the power went off while the user was holding
one of the grab handles because the sliding tab would receive an up
event after screen turned off and release the grab handles.
Bug: 3144874
Change-Id: Iebb91e10592b4ef2de4b1dd3a2e1e4254aacb697
some of these failures are not fatal and even expected in some cases
so they should not emit a dump in the log in those cases.
Change-Id: Idcfa252e3bfa9d74e27fe4ad8f8623aa01aa9c5e
This change fixes a bug in the dispatcher where the window manager
policy would incorrectly receive a key repeat count of 0 in the case
where the key repeat was generated by the hardware or driver.
Long-press on HOME was broken as a result.
Repeating keys could also get stuck down.
Bug: 3159581
Bug: 3208156
Change-Id: I1145487cfcc41a7850dba4cafc63c4a5951ace5b
Two issues:
1. First, due to an inverted conditional in the input dispatcher, we were
reporting touches as long touches and vice-versa to the power manager.
2. Power manager user activity cheek event suppression also suppresses touch
events (but not long touch or up events). As a result, if cheek event
suppression was enabled, touches would not poke the user activity timer.
However due to the above logic inversion, this actually affected long
touches. Net result, if cheek suppression was enabled in the power manager
and you held your thumb on the screen long enough, the phone would
go to sleep!
Cheek event suppression is commonly turned on when making a phone call.
Interestingly, it does not seem to get turned off afterward...
This change fixes the logic inversion and exempts touches from the cheek
suppression. The reason we do the latter is because the old behavior
was actually harmful in other ways too: a touch down would be suppressed
but not a long touch or the touch up. This would cause bizarre behavior
if you touched the screen while it was dimmed. Instead of brightening
immediately, it would brighten either when you lifted your finger or
300ms later, whichever came first.
Bug: 3154895
Change-Id: Ied9ccec6718fbe86506322ff47a4e3eb58f81834
This patch makes the dispatcher drop all of its state when it is
disabled (when the screen turns off). This ensures that the dispatcher
does not get stuck thinking a pointer is still down if the screen
turned off while the user was touching the display (such as a fat touch
while hitting the power button).
Bug: 3098344
Change-Id: If50ef5804870aa1acd3179fd4b40e3cda58dd39d
this is to allow applications to change the format of a surface's
buffer, and have it reflected in EGL; which is needed for
EGLConfig validation.
Change-Id: Iee074c30ad765881e2409c1d37450b05e561c44d
Fixed a bug where we would lose the first touch point when swiping out of
the virtual key area.
Fixed a bug where we would not send an ACTION_MOVE event in cases where
individual pointers went down/up and the remaining pointers actually moved.
This is important since many applications do not handle pointer movements
during ACTION_POINTER_DOWN or ACTION_POINTER_UP. In the case of
ACTION_POINTER_UP the movement was completely lost since all pointers were
dispatched using their old location rather than the new location.
Improved motion event validation to check for duplicate pointer ids.
Added an input source constant that was missing from the NDK api but
defined in the framework api.
Added a timestamp when reporting added/removed devices in EventHub.
Bug: 3070082
Change-Id: I3206a030f43b7616e2f48006e5a9d522c4d92e56
Compute the actual number of indices in the GAMEPAD_KEYCODES instead of
the pure size in bytes.
Bug: 3121536
Change-Id: I71edbd8bf6eff2c8cc0ea5c6845362b3d1e06466
If a ZipFileRO object is uninitialized, the hash table will not have
been initialized. This condition wasn't checked in findEntryByName.
Bug: 3121109
Change-Id: Ib696e0e7e0cb4dd0fb2e456d6a847e5e8f4fe14e
Remember, the system and main logs are
- Shared resources
- Primarily for recording problems
- To be used only for large grained events during normal operation
Bug: 3104855
Change-Id: I136fbd101917dcbc8ebc3f96f276426b48bde7b7
We now poke user activity twice: once upon dequeueing an event
for dispatch and then again just before we dispatch it. The second
poke is to compensate for the fact that it can take a few seconds to
identify the dispatch target (if the application is responding slowly)
but we want to keep the display from going to sleep for X amount of time
after the app gets a chance to actually receive the event. This mirrors
pre-Gingerbread behavior.
Removed some unnecessary code that filters user activity pokes when sending
events to KeyGuard. We don't need this because KeyGuard already tells the
power manager to disable user activity.
Bug: 3101397
Change-Id: I8c3a77601fdef8f584e84cfdd11aa79da0ff51db
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: I8f8398f4fdeb0469e5d71124c21bedf121bd8c07
Added support for calibrating touch size for devices that report
size as an area measurement rather than as a width.
Fixed some bugs.
Bug: 3096045
Change-Id: I30a12e73752883516ed054f8af407204bca45814
Switch to using PBKDF2 for the key generation for OBBs. Any previously
generated OBBs will stop being read correctly. A small pbkdf2gen program
is available to allow generation of appropriate keys with the salts.
Bug: 3059950
Change-Id: If4305c989fd692fd1150eb270dbf751e09c37295
Fixed some issues with Monkeys turning off their own screens. Ook ook!
Added some more comments to explain what's going on.
Change-Id: Id2bc0466161a642a73ef7ef97725d1c81e984b12
Added the concept of a "trusted" event to distinguish between events from
attached input devices or trusted injectors vs. other applications.
This change enables us to move certain policy decisions out of the
dispatcher and into the policy itself where they can be handled more
systematically.
Change-Id: I4d56fdcdd31aaa675d452088af39a70c4e039970
This change fixes several issues where events would be dropped in the
input dispatch pipeline in such a way that the dispatcher could not
accurately track the state of the input device.
Given more robust tracking, we can now also provide robust cancelation
of input events in cases where an application might otherwise become
out of sync with the event stream due to ANR, app switch, policy decisions,
or forced focus transitions.
Pruned some of the input dispatcher log output.
Moved the responsibility for calling intercept*BeforeQueueing into
the input dispatcher instead of the input reader and added support for
early interception of injected events for events coming from trusted
sources. This enables behaviors like injection of media keys while
the screen is off, haptic feedback of injected virtual keys, so injected
events become more "first class" in a way.
Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
Added a couple of micro-optimizations to avoid calling wake() unnecessarily
and reduce JNI overhead slightly.
Fixed a minor issue where we were not clearing the "next" field of Messages
returned by the MessageQueue so the Message would hold on to its successor
and potentially prevent the GC from collecting it if the message were leaked
somehow.
Change-Id: I488d29417ce0cdd7d0e447cda76ec978ef7f811c
There is a new ANativeWindow::cancelBuffer() API that can be used to
cancel any dequeued buffer, BEFORE it's been enqueued. The buffer is
returned to the list of availlable buffers. dequeue and cancel are not
mutually thread safe, they must be called from the same thread or
external synchronization must be used.
Change-Id: I86cc7985bace8b6a93ad2c75d2bef5c3c2cb4d61
the core screenshot function now can capture the screen at any lower resolution
performing bilinear filtering.
we also now have some client code to interface with the screenshot service.
it's now possible to request a screenshot at a lower resolution.
Change-Id: I33689bba98507ab928d0898b21596d0d2fe4b953
AssetManager instances are created by zygote and passed to all its
children so that they don't have to individually open
frameworks-res.apk. This creates a problem for determining the current
file offset when using lseek() on those files, because you can't
guarantee the cross-process locking of a mutex. Luckily, Linux
implements pread() to get around this suckiness.
The problem is that only Linux implements this, so we have to keep the
old locking for use on host builds with aapt and friends. aapt doesn't
have this same problem of sharing file descriptors across forked
processes, so we can keep the local AutoMutex to protect accesses of
those files.
Change-Id: Ibe9f11499a53fe345f50fbaea438815ec0fd363e
This change narrows the opportunity for a race condition setting the
resource Configuration while devices are being updated.
Change-Id: I58efa563f4129ab0fce7108511d16a99dff7e451
There is apparently still a race upon reading the entry Local File
Header that can't be tracked down, so move the LFH check inside the
mutex-protected block so we can call lseek again to see where we are
when we log an error.
Also, close() can fail so use TEMP_FAILURE_RETRY on it so we don't
unwittingly leak file descriptors when Mean Mr. EINTR comes a-knocking.
Change-Id: I753abad0bd882fe28f7281c406fa76f64393ef4c
Added dumpsys reporting to EventHub.
Made the formatting a bit clearer.
Added 'Locked' suffix to some internal methods of EventHub.
Change-Id: Ic449560bcce378f6361895d27c66854e9724abb0
