As part of scheduling policy cleanup, remove or isolate
all references to the scheduling policy APIs.
Change-Id: Ia1ea2fe711a399039f25217309e061267744b856
prctl(PR_SET_NAME) limits to 15 characters. Before we had names like
"Binder Thread #" and the counter was cut off :-( Also remove redundant
"thread" at end of name; it's always a thread.
Change-Id: I1f99c2730ba0787ed9b59c15914356cddf698e2f
MemoryHeapPmem is not used any longer. PMEM is not a supported
type of memory by the system anymore. a particular device might
use PMEM and need something like MemoryHeapPmem, in this case this
should be implemented in device specific code (HAL).
This will most likely break older no longer supported targets.
Change-Id: I434e4291219950018de8b793b0403bb2d92dd5cc
Services now must explicitly opt in to being accessed by isolated
processes. Currently only the activity manager and surface flinger
allow this. Activity manager is needed so that we can actually
bring up the process; SurfaceFlinger is needed to be able to get the
display information for creating the Configuration. The SurfaceFlinger
should be safe because the app doesn't have access to the window
manager so can't actually get a surface to do anything with.
The activity manager now protects most of its entry points against
isolated processes.
Change-Id: I0dad8cb2c873575c4c7659c3c2a7eda8e98f46b0
Switching activity stacks
Cache ContentProvider per user
Long-press power to switch users (on phone)
Added ServiceMap for separating services by user
Launch PendingIntents on the correct user's uid
Fix task switching from Recents list
AppWidgetService is mostly working.
Commands added to pm and am to allow creating and switching profiles.
Change-Id: I15810e8cfbe50a04bd3323a7ef5a8ff4230870ed
Currently, madvise(MADV_REMOVE) is called after deallocation.
Another thread might allocate (and even write) the same region between
deallocation and madvise(), in which case the new thread will fail to read
what it have written. So, call deallocate() after madvise(MADV_REMOVE).
Bug: 5654596
Change-Id: I26f36cd6013de499090768a0ddc68206a4a68219
Was mistakenly assuming that Parcel::writeFileDescriptor took
ownership of the fd that was passed in. It does not!
Added some comments and a default parameter to allow the caller
to specify whether it wishes the Parcel to take ownership.
Bug: 5563374
Change-Id: I5a12f51d582bf246ce90133cce7690bb9bca93f6
On user-debug and eng builds, you can set the
"db.log.slow_query_threshold" system property to queries that
take longer than the specified number of milliseconds.
Set it to 0 to log all queries.
This property has been around for a while but it was implemented
poorly. In particular, it *changed* the behavior of the query
by calling getCount() while holding the Db connection.
In normal operation, the query will not actually run until later.
By putting the timing logic into fillWindow() instead, we ensure
that we only measure queries that actually ran. We also capture
cases where the cursor window gets filled multiple times.
Bug: 5520301
Change-Id: I174f5e1ea15831a1d22a36e9a804d7755f230b38
Bug: 5520301
When an application requests a row from a SQLiteCursor that
is not in the window, instead of filling from the requested
row position onwards, fill from a little bit ahead of the
requested row position.
This fixes a problem with applications that seek backwards
in large cursor windows. Previously the application could
end up refilling the window every time it moved back
one position.
We try to fill about 1/3 before the requested position and
2/3 after which substantially improves scrolling responsiveness
when the list is bound to a data set that does not fit
entirely within one cursor window.
Change-Id: I168ff1d3aed1a41ac96267be34a026c108590e52
There is no difference and has never really been a difference
between local-only and remotable CursorWindows. By removing the
distinction officially in the API, we will make it easier to
implement CrossProcessCursor correctly. CrossProcessCursor
is problematic currently because it's not clear whether a call
to getWindow() will return a local-only window or a remotable window.
As a result, the bulk cursor adaptor has special case handling
for AbstractWindowedCursors vs. ordinary CrossProcessCursors
so that it can set a remotable window before the cursor fills it.
All these problems go away if we just forget about local-only
windows being special in any way.
Change-Id: Ie59f517968e33d0ecb239c3c4f60206495e8f376
Bug: 5332296
The memory dealer introduces additional delays for reclaiming
the memory owned by CursorWindows because the Binder object must
be finalized. Using ashmem instead gives CursorWindow more
direct control over the lifetime of the shared memory region.
The provider now allocates the CursorWindows and returns them
to clients with a read-only protection bit set on the ashmem
region.
Improved the encapsulation of CursorWindow. Callers shouldn't
need to care about details like how string fields are allocated.
Removed the compile-time configuration of string and numeric
storage modes to remove some dead weight.
Change-Id: I07c2bc2a9c573d7e435dcaecd269d25ea9807acd
Bug: 5332296
The code is functionally equivalent, but a little more efficient
and much easier to maintain.
Change-Id: I90670a13799df05831843a5137ab234929281b7c
This reverts commit 56c58f66b97d22fe7e7de1f7d9548bcbe1973029
This CL was causing the browser to crash when adding bookmarks, visiting the bookmarks page, and sharing pages (see bug http://b/issue?id=5369231
Updated the command name lists, and masked off the additional bits in
the command word when doing the name lookup.
Made descriptor values easier to grep for and consistent with kernel
output (i.e. decimal rather than hex). Attempt to show transaction
descriptors as such (they're in a union with a pointer).
Also, the writeLines() function in Static was using a no-op
logging call to write an iovec. It looks like all callers are using
N=1, so I just added a log for the first string.
Bug 5155269
Change-Id: I417b8d77da3eb6ee1d2069ba94047210f75738bc
This is intended to absorb the cost of the IPC
to the permission controller.
Cached permission checks cost about 3us, while
full blown ones are two orders of magnitude slower.
CAVEAT: PermissionCache can only handle system
permissions safely for now, because the cache is
not purged upon global permission changes.
Change-Id: I8b8a5e71e191e3c01e8f792f253c379190eee62e
The offset that is used in the creation of the MemoryHeapBase must be saved, so
that it can be used to recreate the Heap when an IMemory object is passed
across process boundary through the binder.
Change-Id: Ie618fb5c0718e6711f55ed9235616fd801e648dc
Signed-off-by: Anu Sundararajan <sanuradha@ti.com>
Signed-off-by: Iliyan Malchev <malchev@google.com>
We now write battery history directly into a buffer, instead of
creating objects. This allows for more efficient storage; later
it can be even better because we can only write deltas.
The old code is still there temporarily for validation.
Change-Id: I9707d4d8ff30855be8ebdc93bc078911040d8e0b
HAVE_ANDROID_OS was defined as "1" for targets, but never defined as "0"
for non-targets. Changing them to #ifdef should be safe and matches
all the other uses of HAVE_ANDROID_OS throughout the system.
Change-Id: I82257325a8ae5e4e4371ddfc4dbf51cea8ea0abb
If writeString8 is called with the following sequence:
writeString8(String8(""));
writeString8(String8("TempString"));
Then in the readString8, the 2nd String i.e. "TempString" is not read,
instead an empty string is read.
The bug comes because of the write call for String8("") where there are
no String bytes present. In the write Statement, an extra ‘\0’ is
written. During the Marshalling, Following bytes are written:
1 2 3 4 5 ...
0x0 0x0 0xB ‘T’ ‘e’ ...
The readString8 function has a check that, if String length is 0, don’t
read anything. So the first byte is read as the length for the first
string. The second byte i.e. ‘\0’ is read as the length for the second
string and hence the second string becomes empty too.
Change-Id: Id7acc0c80ae16e77be4331f1ddf69ea87e758420
grief from people who think this message is bad news.
but in reality, this message is really just an informational message
to aid in debugging
Change-Id: I1a2ab1666a27adb7d3fd210528b2c5218640d53d
- New feature to "am monitor" to have it automatically launch
gdbserv for you when a crash/ANR happens, and tell you how to
run the client.
- Update dumpstate to match new location of binder debug logs
- Various commented out logs that are being used to track down
issues.
Change-Id: Ia5dd0cd2df983a1fc6be697642a4590aa02a26a5
