ZipUtils is needed by build/tools, move it from libandroidfw
(frameworks/base) to libutils (frameworks/native).
Change-Id: Ib8c41134ccdec6d6aa8d49860f8dddef49a24783
This change adds a check to SurfaceTexture::updateTexImage to verify
that the current GL context is the same as the one that was used for
previous updateTexImage calls.
Change-Id: If02d2f787bcfdb528046dc9ddf6665f8a90e1bf4
This change adds a new callback for BufferQueue consumers to be notified
when the BufferQueue frees some or all of its buffers. This is needed
to retain SurfaceTexture behavior where all buffers would be freed when
the producer disconnects. This change also modifies the
SurfaceTextureGLToGLTest.EglDestroySurfaceUnrefsBuffers test to catch
when the buffers are not freed.
The implementation is a little complicated because it needs to avoid
circular sp<> references across what will be a binder interface (so wp<>
can't be used directly). It also needs to avoid the possibility of
locking the BufferQueue and consumer (e.g. SurfaceTexture) mutexes in
the wrong order.
This change also includes a few additional fixes and test cleanups.
Change-Id: I27b77d0af15cb4b135f4b63573f634f5f0da2182
It's needed to build four shared libraries in 64-bit for 64-bit
emulator with "-gpu on"
lib64OpenglRender.so
lib64EGL_translator.so
lib64GLES_CM_translator.so
lib64GLES_V2_translator.so
Change-Id: Ia6c05b23df1e9cd9e7f2e94e4cd5bde4be5d336b
- condition wasn't signaled if an error happened between acquire and release
- also replace signal with broadcasts
Bug: 6109450
Change-Id: I8ac03c7eca35c9cc04a00ef7fad36bb9cb3fcef6
This is used by the Java trace wrappers to avoid JNI overhead
when trace tags are disabled.
Also added a new tag for the input subsystem and view hierarchy.
Change-Id: Ia04a507e42a37b1d3bbb19859e6c07a92f4fe9aa
As part of scheduling policy cleanup, remove or isolate
all references to the scheduling policy APIs.
Change-Id: Ia1ea2fe711a399039f25217309e061267744b856
prctl(PR_SET_NAME) limits to 15 characters. Before we had names like
"Binder Thread #" and the counter was cut off :-( Also remove redundant
"thread" at end of name; it's always a thread.
Change-Id: I1f99c2730ba0787ed9b59c15914356cddf698e2f
MemoryHeapPmem is not used any longer. PMEM is not a supported
type of memory by the system anymore. a particular device might
use PMEM and need something like MemoryHeapPmem, in this case this
should be implemented in device specific code (HAL).
This will most likely break older no longer supported targets.
Change-Id: I434e4291219950018de8b793b0403bb2d92dd5cc
1. Use "%zu" instead of "%d" for size_t in printf
2. Variable precision specifier (eg. "%.*s") in printf should be of type int.
(iov_len is size_t which is 64-bit when compiled with -m64)
3. Use PRId64 instead of "%lld" to print variables of type int64_t
Change-Id: I2be40a6514b5dffa0038d62b9bccc3401b8756e6
Refactored SurfaceTexture and BufferQueue such that share
no protected members. Created an consumer facing interface
for BufferQueue in preparation of connecting SurfaceTexture
and BufferQueue through a binder.
Change-Id: I938e63e085128148c58d0e26c7213b30145c109f
re-add support for pixelformats L_8, LA_88 and RGB_332 in libui
for backward compatibility.
This may or may not fix 6058926
Bug: 6049685
Change-Id: Ic1b8b4cc994522f7fe664da64c0ef76b98bc6d53
Refactored SurfaceTexture and BufferQueue such that share
no protected members. Created an consumer facing interface
for BufferQueue in preparation of connecting SurfaceTexture
and BufferQueue through a binder.
Change-Id: Iff55e740e36a7f70c9f7a17ee7a5af38e3d21f0f
This does not actually change the framebuffer format. It merely
fakes this format to surfaceflinger so that when it creates
framebuffer surfaces it will use this format. It's really a giant
HACK to allow interworking with buggy gralloc+GPU driver
implementations. You should *NEVER* need to set this for shipping
devices.
Change-Id: I03eeb5b4d72838ef219df386ecc489fc20ab9cc7
Signed-off-by: Dima Zavin <dima@android.com>
Instead of sending finished signals immediately when appending to
a batch, record the chain of sequence numbers that were part of
the batch and then send finished signals all at once when done.
This change helps the dispatcher keep track of the true state
of the application and can improve ANR detection slightly.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I463c2221e2aa8fdf1c3d670c18e39e59ab69b0db
To support this feature, the input dispatcher now allows input
events to be acknowledged out-of-order. As a result, the
consumer can choose to defer handling an input event from one
device (because it is building a big batch) while continuing
to handle input events from other devices.
The InputEventReceiver now sends a notification when a batch
is pending. The ViewRoot handles this notification by scheduling
a draw on the next sync. When the draw happens, the InputEventReceiver
is instructed to consume all pending batched input events, the
input event queue is fully processed (as much as possible),
and then the ViewRoot performs traversals as usual.
With these changes in place, the input dispatch latency is
consistently less than one frame as long as the application itself
isn't stalled. Input events are delivered to the application
as soon as possible and are handled as soon as possible. In practice,
it is no longer possible for an application to build up a huge
backlog of touch events.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I42c01117eca78f12d66d49a736c1c122346ccd1d
This change enables the input dispatcher to send multiple touch
events to an application without waiting for them to be acknowledged.
Essentially this is a variation on the old streaming optimization
but it is much more comprehensive. Event dispatch will stall as
soon as 0.5sec of unacknowledged events are accumulated or a
focused event (such as a key event) needs to be delivered.
Streaming input events makes a tremendous difference in application
performance. The next step will be to enable batching of input
events on the client side once again.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I025df90c06165d719fcca7f63eed322a5cce4a78
Since we will not longer be modifying events in place, we don't need
to use an ashmem region for input. Simplified the code to instead
use a socket of type SOCK_SEQPACKET.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I05909075ed8b61b93900913e44c6db84857340d8
Services now must explicitly opt in to being accessed by isolated
processes. Currently only the activity manager and surface flinger
allow this. Activity manager is needed so that we can actually
bring up the process; SurfaceFlinger is needed to be able to get the
display information for creating the Configuration. The SurfaceFlinger
should be safe because the app doesn't have access to the window
manager so can't actually get a surface to do anything with.
The activity manager now protects most of its entry points against
isolated processes.
Change-Id: I0dad8cb2c873575c4c7659c3c2a7eda8e98f46b0
This adds basic support for clip regions. It is currently disabled at compile
time. Enabling clip regions will require setting up a stencil buffer.
Change-Id: I638616a972276e38737f8ac0633692c3845eaa74
Switching activity stacks
Cache ContentProvider per user
Long-press power to switch users (on phone)
Added ServiceMap for separating services by user
Launch PendingIntents on the correct user's uid
Fix task switching from Recents list
AppWidgetService is mostly working.
Commands added to pm and am to allow creating and switching profiles.
Change-Id: I15810e8cfbe50a04bd3323a7ef5a8ff4230870ed
with this changes, SF transactions are handled as soon as possible
but do not trigger updates. the update is delayed until the next
vsync.
this allows us to work much better without requiring triple-buffering.
Change-Id: I1fa10794d0cf742129f0877698b7b1e1f2ec7401
In our current environment with very many translations, this can
save a lot of RAM -- for example over 200K in Gmail just by sorting
the strings in the Gmail .apk (not the framework).
Also add a new aapt command to print the contents of the resource
table string pool.
Change-Id: I1da037b3e2c377b890833ff57ab158965314ac48
This change enables the use of the EGL_KHR_fence_sync extension in
SurfaceTexture on omap4 and s5pc110 platforms.
Change-Id: Icad5245bab445413ffb8a7c823c296b678bf3250
This is needed when the parent or any other thread besides the child
needs access to the child's kernel tid.
Change-Id: Ib148505913eb78314cfd76657c30d7b20663dffd
Several source files privately defined macros LIKELY and UNLIKELY in terms
of __builtin_expect. But <cutils/compiler.h> already has CC_LIKELY and
CC_UNLIKELY which are intended for this purpose. So rename the private
uses to use the standard names.
In addition, AudioFlinger was relying on the macro expanding to extra ( ).
Change-Id: I2494e087a0c0cac0ac998335f5e9c8ad02955873
Currently, madvise(MADV_REMOVE) is called after deallocation.
Another thread might allocate (and even write) the same region between
deallocation and madvise(), in which case the new thread will fail to read
what it have written. So, call deallocate() after madvise(MADV_REMOVE).
Bug: 5654596
Change-Id: I26f36cd6013de499090768a0ddc68206a4a68219
- add the ability to set the vsync delivery rate, when the rate is
set to N>1 (ie: receive every N vsync), SF process' is woken up for
all of vsync, but clients only see the every N events.
- add the concept of one-shot vsync events, with a call-back
to request the next one. currently the call-back is a binder IPC.
Change-Id: I09f71df0b0ba0d88ed997645e2e2497d553c9a1b
This change adds a compile-time option for SurfaceTexture to use the
EGL_KHR_fence_sync extension to synchronize access to Gralloc buffers.
Bug: 5122031
Change-Id: I7e973a358631fff5308acf377581b811911fe790
use gui/DisplayEvent to receive the events. Events are
dispatched through a unix pipe, so the API is compatible
with utils/Looper. see gui/DisplayEvent.h for more info.
Bug: 1475048
Change-Id: Ia720f64d1b950328b47b22c6a86042e481d35f09
Revert "Add support for sending VSYNC events to the framework"
This reverts commit f3918c5bd4bc9f02f74da42995564150ca2dd382.
Change-Id: I998e3e1aa3fa310829ae973b64fe11b01f6f468f
use gui/DisplayEvent to receive the events. Events are
dispatched through a unix pipe, so the API is compatible
with utils/Looper. see gui/DisplayEvent.h for more info.
Bug: 1475048
Change-Id: If4126023fc9c067e56087ec7d16a8fd542ce1794
The basic hashtable is intended to be used to support a variety
of different datastructures such as map, set, multimap,
multiset, linkedmap, generationcache, etc.
Consequently its interface is fairly primitive.
The basic hashtable supports copy-on-write style functionality
using SharedBuffer.
The change introduces a simple generic function in TypeHelpers for
specifying hash functions. The idea is to add template
specializations of hash_type<T> next to the relevant data structures
such as String8, String16, sp<T>, etc.
Change-Id: I2c479229e9d4527b4fbfe3b8b04776a2fd32c973
* commit 'c25972950c2ea62fb085524dbe737c2bf0f08f4a':
SurfaceTexture: fix a couple tests
EGL: default to swap interval 1
SurfaceTexture: clean up some tests
This change fixes some robustness issues with the
EglDestroySurfaceUnrefsBuffers and
EglDestroySurfaceAfterAbandonUnrefsBuffers tests. The tests previously
depended upon GL implementation details that should not have been relied
upon.
Change-Id: I37fd43b56568efe1dbe69d85e892be8a1cf44d20
This change explicitly sets swap interval 1 on the window when an
EGLSurface is created to render to it.
Change-Id: I91eb29dbee3ae4a55076b921f084d503fbe94e03
This change cleans a few things up in the SurfaceTexture tests:
- Wraps a few long lines.
- Refactors the multithreading portions of SurfaceTextureGLToGLTest into
a new test fixture called SurfaceTextureGLThreadToGLTest.
- Changes some of the tests that were creating their own EGLSurface to
use the SurfaceTextureGLToGLTest fixture.
- Reorders the test functions so that they are immediately below to the
test fixture that they use.
Change-Id: I0491ce3528a7ff2b4f1e83602ba290269c087297
this happens often with CPU Surfaces, which disconnect long
after their surfacetexture has been abandoned.
Change-Id: If49da03b72f99130e01b2b9bcbd444bb38f7ed4e
this flag should be enabled for all targets, but currently
some have issues with it, so we're turning it on only for
tested targets.
this will hopefully resolve some performance issues.
Bug: 5553562, 5631630
Change-Id: I54c7a9e2068586898ab13e405d95534669260537
the working theory here is that a Surface object has become non-promotable
because it lost its last reference; later Surface::readFromParcel is called
the previous surface is found in the cache, but can't be promoted. this causes
a new Surface object to be created which will promptly try to connect to the
CPU_API -- this in turn will fail because the previous (now dead) surface is
still connected.
To fix this, we make sure to disconnect from the SurfaceTexture when
Surface[TextureClient] is destroyed.
Change-Id: I422234868a05d7b7d283e9d5a85f7ab79e65d8a9
This change fixes an issue involving buffer reallocation and the
ALLOW_DEQUEUE_CURRENT_BUFFER mode in SurfaceTexture. The bug happened
when the buffer slot currently attached to the GL texture was selected
for dequeuing, but the dequeue operation caused the buffer to be
reallocated. Because the buffer is new, the image producer could fill
the buffer and queue it before an updateTexImage call, which would
result in the "slot %d is current" error in queueBuffer.
Bug: 5631630
Change-Id: Icdd8bc5cad3c7db43953446d9be2603aaea11a8d
Stop using system properties to publish information about
the key character map path. Instead, we can retrieve it
on demand by asking the window manager.
It was possible to exhaust the supply of system properties
when repeatedly adding and removing input devices.
Bug: 5532806
Change-Id: Idd361a24ad7db2edc185c8546db7fb05f9c28669
Surface Texture dequeue logic is modified to return the oldest of the
free buffers to Client on dequeue call.
Currently dequeue method is returning the first buffer index which is free.
The parsing is done in ascending order of the buffer slot indices.
This leads to returning the buffer which has been just queued to composer,
and hence display, and this defeats the purpose of having minimum dequeue count
as 2 in asynchrnouse mode.
This is fixed by checking all the free slots and returning the oldest buffer.
Change-Id: Ibbac10593c3994c278c601af0480b171635ecdd4
Signed-off-by: Sunita Nadampalli <sunitan@ti.com>
this flag should be enabled for all targets, but currently
some have issues with it, so we're turning it on only for
tested targets.
this will hopefully resolve some performance issues.
Bug: 5553562
Change-Id: I939992b4cd0debea980dec0127c72be2dff33af8
Was mistakenly assuming that Parcel::writeFileDescriptor took
ownership of the fd that was passed in. It does not!
Added some comments and a default parameter to allow the caller
to specify whether it wishes the Parcel to take ownership.
Bug: 5563374
Change-Id: I5a12f51d582bf246ce90133cce7690bb9bca93f6
This change adds serialization and deserialization functionality to
BlobCache, conforming to the Flattenable interface.
Change-Id: Ibc99cb1c3d015f363d57d0713eabccec07ff975e
This change removes the mutex from the BlobCache class. The caller must
be responsible for thread synchronization in order to properly implement
the Flattenable interface, which is coming soon. Otherwise would be the
potential for the cache contents to change between the call to the
getFlattenedSize and flatten methods. Because the caller must do this
synchronization anyway there's no reason to also some synchronization
inside BlobCache.
Change-Id: Ie1f4f6f82b78744f46a41ce863cac0cad276a20e
On user-debug and eng builds, you can set the
"db.log.slow_query_threshold" system property to queries that
take longer than the specified number of milliseconds.
Set it to 0 to log all queries.
This property has been around for a while but it was implemented
poorly. In particular, it *changed* the behavior of the query
by calling getCount() while holding the Db connection.
In normal operation, the query will not actually run until later.
By putting the timing logic into fillWindow() instead, we ensure
that we only measure queries that actually ran. We also capture
cases where the cursor window gets filled multiple times.
Bug: 5520301
Change-Id: I174f5e1ea15831a1d22a36e9a804d7755f230b38
Bug: 5520301
When an application requests a row from a SQLiteCursor that
is not in the window, instead of filling from the requested
row position onwards, fill from a little bit ahead of the
requested row position.
This fixes a problem with applications that seek backwards
in large cursor windows. Previously the application could
end up refilling the window every time it moved back
one position.
We try to fill about 1/3 before the requested position and
2/3 after which substantially improves scrolling responsiveness
when the list is bound to a data set that does not fit
entirely within one cursor window.
Change-Id: I168ff1d3aed1a41ac96267be34a026c108590e52
This fixes the build on Linux when RefBase is compiled with reference tracking
enabled.
Change-Id: I3e931e0b463ce836f6fdb30c37068d77144631a3
Signed-off-by: Iliyan Malchev <malchev@google.com>
This change adds two tests to ensure that eglDestroySurface does not
cause Gralloc buffers to be leaked.
Bug: 5472838
Change-Id: Id675d74e34b6479f2d68314d40de94aede69f142
This change makes SurfaceTextureClient free its references to all the
buffers even when the disconnect binder call to the SurfaceTexture
fails.
Bug: 5384823
Change-Id: Iad787fbae5fda4769546fd52276e4e4030c62be6
if system process ever restarted, processes using a SensorManager
would loose the ability to use it, resulting to a crash.
we now listen for sensor service death and reconnected if necessary.
Bug: 5445240
Change-Id: Ia47f8b26cdcecb729fa22bf11d55e10fcaef8cfc
This change enables a layer or orientation update transaction sent to
SurfaceFlinger to explicitly request a synchronous transaction.
Change-Id: I97cbba610c13679849f66114b216fa6dbf12f2a9
This change fixes the ISurfaceTexture error reporting for the case where
the binder transaction fails.
Bug: 5082219
Change-Id: I6517532992e3a76dc9eb5e4a36af43a562391aaa
There is no difference and has never really been a difference
between local-only and remotable CursorWindows. By removing the
distinction officially in the API, we will make it easier to
implement CrossProcessCursor correctly. CrossProcessCursor
is problematic currently because it's not clear whether a call
to getWindow() will return a local-only window or a remotable window.
As a result, the bulk cursor adaptor has special case handling
for AbstractWindowedCursors vs. ordinary CrossProcessCursors
so that it can set a remotable window before the cursor fills it.
All these problems go away if we just forget about local-only
windows being special in any way.
Change-Id: Ie59f517968e33d0ecb239c3c4f60206495e8f376
This change renames the ScreenshotsOfProtectedBuffersFail to
ScreenshotsOfProtectedBuffersSucceed and changes the test to verify that
the screenshot succeeds.
Change-Id: I960bb8eed4211578cb4dc446b08392937da064b6
This change merges the ISurfaceComposer::setOrientation functionality
into ISurfaceComposer::setTransactionState. It enables the window
manager to atomically update both the display orientation and the
position and size of the windows in a single transaction with
SurfaceFlinger.
Bug: 5439574
Change-Id: I18a8ccc564d7d760ef8afb2d015ccdb7a7963900
Bug: 5332296
The memory dealer introduces additional delays for reclaiming
the memory owned by CursorWindows because the Binder object must
be finalized. Using ashmem instead gives CursorWindow more
direct control over the lifetime of the shared memory region.
The provider now allocates the CursorWindows and returns them
to clients with a read-only protection bit set on the ashmem
region.
Improved the encapsulation of CursorWindow. Callers shouldn't
need to care about details like how string fields are allocated.
Removed the compile-time configuration of string and numeric
storage modes to remove some dead weight.
Change-Id: I07c2bc2a9c573d7e435dcaecd269d25ea9807acd
Bug: 5332296
The code is functionally equivalent, but a little more efficient
and much easier to maintain.
Change-Id: I90670a13799df05831843a5137ab234929281b7c
This change adds a hack to allow Android Browser to use a SurfaceTexture
to stream RGBA images to a GL_TEXTURE_2D texture object.
Change-Id: Idb90064d5d4b920959ef3be7451362ac5012460e
This reverts commit 56c58f66b97d22fe7e7de1f7d9548bcbe1973029
This CL was causing the browser to crash when adding bookmarks, visiting the bookmarks page, and sharing pages (see bug http://b/issue?id=5369231
This change adds support for setting a string that can be used to
identify a SurfaceTexture object in log messages.
Change-Id: Ib4ee085f36c8830dc964c05ef1654f5a55dfcd60
the boolean operation code assumes rects are valid and
could go into an infinite loop if not. make sure we
abort before that happens.
Bug: 5331198, 5334829
Change-Id: Iee4e3b838ecf504ef21f7447fd2e34a56e7dc3f8
Bug: 5335420
Fixed a bug in VelocityTracker where the output velocity was
not being set to zero when not available.
Added a condition to ensure that the velocity is at least
the minimum fling velocity before continuing. If not, then
the user is trying to stop the fling and scroll more precisely.
Change-Id: I36634b0c3f7a9a09cf20c33f71d41163a8e33eed
Bug: 5265529
Rewrote the velocity tracker to fit a polynomial curve
to pointer movements using least squares linear regression.
The velocity is simply the first derivative of this polynomial.
Clients can also obtain an Estimator that describes the
complete terms of the estimating polynomial including
the coefficient of determination which provides a measure
of the quality of the fit (confidence).
Enhanced PointerLocation to display the movement curve predicted
by the estimator in addition to the velocity vector.
By default, the algorithm computes a 2nd degree (quadratic)
polynomial based on a 100ms recent history horizon.
Change-Id: Id377bef44117fce68fee2c41f90134ce3224d3a1
Bug: 5265529
Calculate the velocity using the most recent touch sample as the
point of reference instead of the oldest. This change more heavily
weights recent touch samples and reduces the sample time window
used for calculation. This significantly improves the accuracy
of fling gesture detection.
Change-Id: Ib1940933e786e5f6a731552a99bcd9400741d55f
Updated the command name lists, and masked off the additional bits in
the command word when doing the name lookup.
Made descriptor values easier to grep for and consistent with kernel
output (i.e. decimal rather than hex). Attempt to show transaction
descriptors as such (they're in a union with a pointer).
Also, the writeLines() function in Static was using a no-op
logging call to write an iovec. It looks like all callers are using
N=1, so I just added a log for the first string.
Bug 5155269
Change-Id: I417b8d77da3eb6ee1d2069ba94047210f75738bc
In queuebuffer, if the surfacetexture returns an error,
surfacetextureclient should check for that and pass on the error.
Change-Id: Ie6d70e779fac0702f372eb4df5ecb655280875ee
Added Surface.setPosition(float, float) which allows to set a surface's
position in float.
Bug: 5239859
Change-Id: I903aef4ad5b5999142202fb8ea30fe216d805711
this bug was introduced recently. in some situations Surface::lock()
is not able to preserve the content of the back buffer and needs
to tell the caller to redraw everything.
Bug: 5186460
Change-Id: I14e03939ddfc1b7ad2a8b99ad79435314c60e78e
This change fixes the NATIVE_WINDOW_QUEUES_TO_WINDOW_COMPOSER query of
Surface and SurfaceTextureClient. Surface now uses the inherited
SurfaceTextureClient implementation of this query. SurfaceTextureClient
now queries SurfaceFlinger to determine whether buffers that are queued
to its ISurfaceTexture will be sent to SurfaceFlinger (as opposed to
some other process).
Change-Id: Iff187e72f30d454229f07f896b438198978270a8
