* changes:
make sure to reset the framenumber when a buffer is marked FREE
Make ANW.setSwapInterval(0) work again
BuffferQueue disconnect is now always asynchrnous
BufferQueue improvements and APIs changes
we can now queue/dequeue a buffer in asynchrnous mode by using the
async parameter to these calls. async mode is only specified
with those calls (it is not modal anymore).
as a consequence it can only be specified when the buffer count
is not overidden, as error is returned otherwise.
Change-Id: Ic63f4f96f671cb9d65c4cecbcc192615e09a8b6b
we tag queued buffers with the "bufferqueue cannot block" flag
and use that bit to discard a buffer in the queue by new ones
comming in. this allows us to remove the buffer queue drain in
disconnect while maintaining the right behaviour if it gets
connected again (since each buffer remembers how it was enqueued).
Change-Id: I1e703d363a687b70b19ba49cef32213116e8bd3f
this is the first step of a series of improvements to
BufferQueue. A few things happen in this change:
- setSynchronousMode() goes away as well as the SynchronousModeAllowed flag
- BufferQueue now defaults to (what used to be) synchronous mode
- a new "controlled by app" flag is passed when creating consumers and producers
those flags are used to put the BufferQueue in a mode where it
will never block if both flags are set. This is achieved by:
- returning an error from dequeueBuffer() if it would block
- making sure a buffer is always available by replacing
the previous buffer with the new one in queueBuffer()
(note: this is similar to what asynchrnous mode used to be)
Note: in this change EGL's swap-interval 0 is broken; this will be
fixed in another change.
Change-Id: I691f9507d6e2e158287e3039f2a79a4d4434211d
When acquiring a buffer, SurfaceFlinger now computes the expected
presentation time and passes it to the BufferQueue acquireBuffer()
method. If it's not yet time to display the buffer, acquireBuffer()
returns PRESENT_LATER instead of a buffer.
The current implementation of the expected-present-time computation
uses approximations and guesswork.
Bug 7900302
Change-Id: If9345611c5983a11a811935aaf27d6388a5036f1
This is currently safe to do only for processes that disallow any binder
threads to be created: setThreadPoolMaxThreadCount(0).
Change-Id: I8a27f3cf26f4d51edb7f222af487ac256cbcab65
Adds logging to help determine what is happening to the /dev/binder
fd and dump the process state when it happens.
bug: 8912673
Change-Id: I2aa0c66fc499e91e0bf9ee4ae20404bec35adc82
Now that we are having separate buffer-instances for the buffer-
queue, we can free all buffers; we don't have to keep the head
alive.
Change-Id: I023e9161a2501d99333f8868ce438afa914ec50f
Signed-off-by: Lajos Molnar <lajos@google.com>
Related-to-bug: 7093648
Instead of representing the buffer-queue as a vector of buffer
indices, represent them as a vector of BufferItems (copies).
This allows modifying the buffer slots independent of the queued
buffers.
As part of this change, BufferSlot properties that are only
been relevant in the buffer-queue have been removed.
Also, invalid scalingMode in queueBuffer now returns an error.
ConsumerBase has also changed to allow reuse of the same
buffer slots by different buffers.
Change-Id: If2a698fa142b67c69ad41b8eaca6e127eb3ef75b
Signed-off-by: Lajos Molnar <lajos@google.com>
Related-to-bug: 7093648
In b2cac4ff37, the last
reference to property_get was removed, but the include
file remained. Remove it.
This is causing me unrelated problems.
Change-Id: I87bbfbfa5871f6da4a1b00037a225f67bbd75881
- timeout is now 3 seconds instead of 1
- simplifies the API a bit
- allows us to change/tweak this timeout globaly
Bug: 8988871
Change-Id: I8d3c6ec43a372f602fb3f29856710339f86c0ec9
until now it was only used to discard a layer entirely.
we're now reducing the size of the layer if it is still
visible, if possible.
this works for instance when a surfaceView is used and
only the menu bar is displayed over it.
Change-Id: I3f5527c5cd1e69ecc968272c8948f1513ada8c55
when libutils is statically linked, the ordering of the static
initializer is not guaranteed and therefore it's unsafe to use
empty static strings: e.g.:
static String8 sThisStaticStringIsNotSafe;
instead, this new constructor can be used:
static String8 sThisStaticStringIsSafe(kEmptyString);
Change-Id: Ia3daf1cab1c97d021c0ee9c2b394b5e27e8d6c0d
This is just to support the watchdog to give it a faster
way to determine if a thread is deadlocked without having
to post a message to it.
Change-Id: I068dc8b9387caf94fe5811fb4aeb0f9b57b1a080
- Add fields to CpuConsumer::LockedBuffer for new information
- New lock methods for GraphicBuffer and GraphicBufferMapper for
the format
Bug: 8734880
Change-Id: If31f82c62d64b6942cf4cc6e5715585c03273f12
This change fixes how the MultiTextureConsumerTest.EGLImageTargetWorks checks
for pixels. It removes the call to eglSwapBuffers so that the test does not
rely on EGL swap-preserve behavior, and it makes the test use checkPixel()
rather than doing glReadPixels itself.
Bug: 8349336
Change-Id: I0f446a0083eebd07af6fd208762878b4e367725a
mDefaultWidth, mDefaultHeight and mCurrentScallingMode are now
initialized to the same default value that BufferQueue uses.
Change-Id: I0d4da2022b06419d12745716d8ddbd48c8869953
This change increases the pixel difference tolerance of the
SurfaceTextureGLTest.TexturingFromCpuFilledYV12BufferNpot test from 2 to 3.
Bug: 8349135
Change-Id: I82e361a689335f49065cacd8a3fc145d67b125f1
This moves the call to ConsumerBase::abandon from the ConsumerBase dtor to
ConsumerBase::onLastStrongRef. The abandon call relies on virtual methods to
perform the clean-up, so calling it from the ConsumerBase dtor after the
derived classes dtors ran was skipping some of the clean-up. The
onLastStrongRef method should get called just before the most derived class's
dtor gets called.
Bug: 8349135
Change-Id: I836946826927cc1ed69c049049f525f92b17a269
since the transparent region hint really depends on the
content of the window containing the SurfaceView
(it's calculated by the view hierarchy based on
overlapping views), it makes sense to latch it only when
the content of the window (the app) changes.
This should help fixing drawing artifacts when changing the
layout of a window containing a SurfaceView.
Bug: 8511430
Change-Id: Ic3aa668495293cb4d82a2cd7dcf3b6a337287678
We now detect at runtime which sync features to use, which
allows us to remove a lot of the compile-time configuration
options. There is still one option though, to disable
KHR_fence_sync on some devices (which are more efficient
without it).
- added a backdoor to get the vendor's EGL strings
the new logic is:
- use always ANDROID_native_fence_sync if available
- fallback to KHR_fence_sync if available and not disabled
by the compile-time option
- use KHR_wait_sync if available and either of the above is
enabled
Change-Id: I9c4b49d9ff1151faf902cc93bd53ea5f205aaabf
* commit 'a6e3962f539e287ffe7f03c67654e50214ff1404':
replace eglWaitSyncANDROID by eglWaitSyncKHR
update EGL headers to most recent
cleanup EGL extensions strings and entry-points
- added a ctor that updates and dumps the stack immediately
- added a "logtag" parameter to dump()
Change-Id: Ie51c256071d282591752243bdb4f68cf9ff8829d
We're not using IMemoryHeap as a transport anymore,
instead we're providing a CpuConsumer and use the
IGraphicBufferProducer version of the screenshot API.
However, some GPU drivers don't support properly
a GPU to CPU path, to work around this, we use a
temporary BufferQueue on the server side for the
GL rendering, and we use glReadPixels into the
CpuConsumer (we're now using a CPU to CPU path
which is always supported).
Currently this "wrapping" is always performed,
but it can be bypassed on devices that support
the GPU to CPU path.
This also addresses a DoS attack vector on
SurfaceFlinger, where an application could
consume all of SF's filedescriptors by creating
a lot of screenshots in a row.
Bug: 8390553
Change-Id: I9e81514c2a7711b9bb393f74305be7d2abe08f1c
background:
we have some code to fix-up the IDs of references when
using RefBase's DEBUG_REFS when those refs are managed by
arrays wp<> or sp<> (this is because wp<> / sp<> don't have
a trivial ctor when DEBUG_REFS is enabled, and Vector
treats them as trivial for obvious performance reasons)
this is complicated by the fact that we don't want to have
to recompile everything when enabling DEBUG_REFs (i.e.: the
Vector code cannot know wheter it's enabled or not for its
template stuff).
problem:
there was a bug in the fix-up code for wp<> which was trying
to access the weakref_impl from the RefBase* however, this was
moronic since RefBase could have been destroyed if there wasn't
any more strong refs -- and this happned. Instead we need to get
the weakref_impl directly from the wp<>
Change-Id: Ie16e334204205fdbff142acb9faff8479a78450b
* commit '88f70a2167528ec849845e1203cfd9c6ff35a67d':
Add BufferQueueInterposer and use it for virtual displays
Add DisplaySurface abstraction
Fix argument types in IGraphicBufferProducer methods
Minor cleanups/fixes before virtual display refactoring
- stacks are now saved in /data/debug which must be
created and writable by the user.
- removed "always fatal" DEBUG_REFS option, it wasn't
really needed.
- DEBUG_REFS_ENABLED_BY_DEFAULT is not the default anymore
(usually people want to target which refs they're tracking)
Change-Id: I37fae72e9dacde6ce1fa8f7dbe2bc01b1a1b95e5
Third-party libraries are currently trying to use the
MemoryBase constructor but failing because we fixed the
definition of ssize_t. This is a stop-gap for users of
this private API until we can get them fixed.
Bug: 8253769
Change-Id: Ie7c86f45fa39cb53539cab0ffe8585a585656714
Third-party libraries are currently trying to use the
MemoryBase constructor but failing because we fixed the
definition of ssize_t. This is a stop-gap for users of
this private API until we can get them fixed.
Bug: 8253769
Change-Id: I8a19770f3252d88ee87023fde625cc6289924b0d
ISurface was only used to get the IGraphicBufferProducer from
a Layer. It's now replaced by a BBinder subclass / IBinder and
is only used as a handle to the surface, to both refer to it
and manage its life-time.
Also cleaned-up a bit the ISurfaceComposer interface and
"create layer" code path.
Change-Id: I68d0e02d57b862cffb31d5168c3bc10cea0906eb
When disconnecting from BufferQueue, we now drain the queue
except the head (which means in the screenshot case we won't
have to block, but we might not have a buffer to show, this
will appear as an error in the log).
Bug: 8362363
Change-Id: If80989aac3c917beea2ebddf3cbb502849d394da
we check that the order in which we destroy GLConsumer wrt.
releasing the corresponding EGLSurface via eglMake(Un)Current
doesn't leak a buffer.
On at least 2 devices this test doesn't pass.
Change-Id: I63ab83951b4b0a977f38571158f948cbd9dc7cec
When a binder service's main thread joins the thread pool
it retains its name (whatever the exec name was), which is
very confusing in systrace.
we now rename that thread just like its friends in the
thread pool.
Change-Id: Ibb3b6ff07304b247cfc6fb1694e72350c579513e
