This changes the ANativeWindow API and the two implementations to reset
the window's crop rectangle to be uncropped when the window's buffer
geometry is changed.
Bug: 3359604
Change-Id: I64283dc8382ae687787ec0bebe6a5d5b4a0dcd6b
The touch screen sometimes reports more than 10 pointers even though that's
all we asked for. When this happens, we start dropping events with more
than 10 pointers. This confuses applications and causes them to crash.
Raised the limit to 16 pointers.
Bug: 3331247
The default behavior was to identify all touch devices as touch screens.
External devices that are plugged in are more likely to be touch pads
not attached to a screen. Changed the default to be a touch pad
and renamed some internal constants to avoid confusion.
A certain mouse happens to also behave like a touch pad. That caused
problems because we would see multiple concurrent traces of motion events
coming from the same input device so we would batch them up.
Added code to ensure that we don't batch events unless they come from
the same *source* in addition to coming from the same *device*.
Due to batching or misbehaving drivers, it's possible for the set of
pointer ids to be different from what we expect when it comes time to
split motion events across windows. As a result, we can generate motion
events with 0 pointers. When we try to deliver those events, we cause
an error in the InputTransport so we tear down the InputChannel and kill
the application.
Added code to check out assumption about pointer ids and drop the
event gracefully instead.
Patched up the tests to take into account the change in default behavior
for identifying touch screens and touch pads.
Change-Id: Ic364bd4cb4cc6335d4a1213a26d6bdadc7e33505
Generally we never want to lock a buffer for write access if it is at
the "head" on the surfaceflinger side. The only exception (1) is when
the buffer is not currently in use AND there is at least one queued
buffer -- in which case, SurfaceFlinger will never use said buffer
anymore, because on the next composition around, it will be able to
retire the first queued buffer.
The logic above relies on SurfaceFlinger always retiring
and locking a buffer before composition -- unfortunately this
didn't happen during a screenshot.
This could leave us in a situation where a buffer is locked by the
application for write, and used by SurfaceFlinger for texturing,
causing a hang.
Here, we fix this issue by never assuming the exception (1), it was
intended as an optimization allowing ANativeWindow::lockBuffer() to
return sooner and was justified when most of SF composition was
done in software. The actual buffer locking is now ensured by
gralloc. We could have handled screenshots in a similar way to
a regular composition, but it could have caused glitches on screen,
essentially, taking a screenshot could cause to skip a frame.
now that we removed the notion of a "inUse" buffer in surfaceflinger
a lot of code can be simplified / removed.
noteworthy, the whole concept of "unlockClient" wrt. "compositionComplete"
is also gone.
Previously, display lists were used only if hardware acceleration
was enabled for an application (hardwareAccelerated=true) *and* if
setDrawingCacheEnabled(true) was called. This change makes the framework
use display lists for all views in an application if hardware acceleration
is enabled.
In addition, display list renderering has been optimized so that
any view's recreation of its own display list (which is necessary whenever
the visuals of that view change) will not cause any other display list
in its parent hierarchy to change. Instead, when there are any visual
changes in the hierarchy, only those views which need to have new
display list content will recreate their display lists.
This optimization works by caching display list references in each
parent display list (so the container of some child will refer to its
child's display list by a reference to the child's display list). Then when
a view needs to recreate its display list, it will do so inside the same
display list object. This will cause the content to get refreshed, but not
the reference to that content. Then when the view hierarchy is redrawn,
it will automatically pick up the new content from the old reference.
This optimization will not necessarily improve performance when applications
need to update the entire view hierarchy or redraw the entire screen, but it does
show significant improvements when redrawing only a portion of the screen,
especially when the regions that are not refreshed are complex and time-
consuming to redraw.
Change-Id: I68d21cac6a224a05703070ec85253220cb001eb4
now that we removed the notion of a "inUse" buffer in surfaceflinger
a lot of code can be simplified / removed.
noteworthy, the whole concept of "unlockClient" wrt. "compositionComplete"
is also gone.
Change-Id: I210413d4c8c0998dae05c8620ebfc895d3e6233d
InputReader::getSwitchState always returns AKEY_STATE_UNKNOWN
because SwitchInputMapper::getSources() returns 0 which cannot
match any source mask including AINPUT_SOURCE_ANY. As a result
initial lid switch detection is broken.
This change adds a new source constant AINPUT_SOURCE_SWITCH
that indicates that the source has switches.
Change-Id: I5321ecf0ce84f1c2b4535f6c163d3f4dcf9b7a9b
InputReader::getSwitchState always returns AKEY_STATE_UNKNOWN
because SwitchInputMapper::getSources() returns 0 which cannot
match any source mask including AINPUT_SOURCE_ANY. As a result
initial lid switch detection is broken.
This change adds a new source constant AINPUT_SOURCE_SWITCH
that indicates that the source has switches.
Change-Id: I5321ecf0ce84f1c2b4535f6c163d3f4dcf9b7a9b
This change implements the onFrameAvailable callback for the
SurfaceTexture java class. It includes the C++ SurfaceTexture code as
well as the JNI and Java code to enable the callback.
Change-Id: Ifd8b8e7ad46ee70cba6da1c2e96dab8045d1ea30
when we validate the surface there, most errors are in fact allowed
because it is legal to cancel a buffer after a surface has been
destroyed (for instance). in that case make sure to not log
error messages as they are very confusing.
Change-Id: Iecdfbaf6d9ee5da54d56cd7ea7a0d430c30934b0
This change fixes a horrible hack that I did to allow application
processes to create GraphicBuffer objects by making a binder call to
SurfaceFlinger. This change introduces a new binder interface
specifically for doing this, and does it in such a way that
SurfaceFlinger will maintain a reference to the buffers until the app is
done with them.
Change-Id: Icb240397c6c206d7f69124c1497a829f051cb49b
This change adds support for the setCrop and setTransform methods of the
SurfaceTexture C++ class. The crop and transform for the current
texture will be accessed by applications as a single texture coordinate
transform matrix.
Change-Id: I6482bf96f680e5c175364e848936db3908d6c8f8
Adds a new virtualKeyQuietTimeMillis configuration resource that sets
the duration for which virtual keys will be dropped after recent touches
on screen. The default value is 0; it is intended to be overridden
per device using a resource overlay.
This change is designed to help in two cases:
1. Swipes from touchscreen into virtual key area.
2. Accidental taps in virtual key area while using on-screen keyboard.
Bug: 3089163
Change-Id: Id6733c83c2e2bc8d9553aa0e5c1fd74b741bec6e
We need to reset mCurrentTexture and mLastQueued in setBufferCount
because it frees all of the buffers associated with the buffer slots.
Change-Id: Ie2f834ec1c07ce7a4ab9b2b5fc5fe8c294010c60
This change adds the C++ implementation of SurfaceTexture and related
classes. The goal of this is for a SurfaceTexture to be passed to
camera service or Stagefright in place of a Surface to allow camera
preview or decoded video frames to be streamed to an OpenGL ES texture
that an application can use.
Change-Id: I55c83a7017f1ecb81c9c9e3252cbd118b914296c
This change adds a new binder method to the ISurfaceComposer interface.
This IPC is intended to allow SurfaceFlinger clients to allocate gralloc
buffers using SurfaceFlinger as a proxy to gralloc.
Change-Id: Ide9fc283aec5da6268ba62cfed0c3319a50b640d
Added support for loading the pointer icon from a resource.
Moved the system server related bits of the input manager out
of libui and into libinput since they do not need to be linked into
applications.
Change-Id: Iec11e0725b3add2b905c51f8ea2c3b4b0d1a2d67
Make the output from aapt dump --values resources and aapt dump xmltree normalized, so that it is unambigously displayed
regardless of the content of the strings.
Change-Id: Ia3bff36c4ee1e9a44f474534e154830948beabdf
Some parts stubbed out but you can plug in a mouse and move
a green cursor around to interact with the UI.
Change-Id: I80d597a7f11d3bd92041890f74b3c77326975e6e
let cursor window size be set per device in device resources file.
default is 1MB.
for SR, it is 2MB.
it can be set to any value (in kB) in the device resource
strings.xml file
Change-Id: I67b1d04a5c9fc18b0cd4da6184d0b814b64d89e9
The asset system and supporting libraries were using off_t instead of
off64_t to access files larger than 2GB (32-bit signed). This change
replaces all off_t with off64_t and lseek64.
There is a new utils/Compat.h added for Mac OS compatibility.
Also fixed some size-related compiler warnings.
Bug: 3205336
Change-Id: I9097b3cb7a602e811fe52f245939d8975da55e9e
This change enables the framework to synthesize key events to implement
default behavior when an application does not handle a key.
For example, this change enables numeric keypad keys to perform
their associated special function when numlock is off.
The application is informed that it is processing a fallback keypress
so it can choose to ignore it.
Added a new keycode for switching applications.
Added ALT key deadkeys.
New default key mappings:
- ESC -> BACK
- Meta+ESC -> HOME
- Alt+ESC -> MENU
- Meta+Space -> SEARCH
- Meta+Tab -> APP_SWITCH
Fixed some comments.
Fixed some tests.
Change-Id: Id7f3b6645f3a350275e624547822f72652f3defe
* commit 'a2977c383d363e1e88a5b36230b1fa4c312807d2':
[3171580] SurfaceFlinger Bypass mode. (DO NOT MERGE)
[3171580] Add transform field to native buffers. (DO NOT MERGE)
some of these failures are not fatal and even expected in some cases
so they should not emit a dump in the log in those cases.
Change-Id: Idcfa252e3bfa9d74e27fe4ad8f8623aa01aa9c5e
Use Vendor ID, Product ID and optionally the Version to
locate keymaps and configuration files for external devices.
Moved virtual key definition parsing to native code so that
EventHub can identify touch screens with virtual keys and load
the appropriate key layout file.
Cleaned up a lot of old code in EventHub.
Fixed a regression in ViewRoot's fallback event handling.
Fixed a minor bug in FileMap that caused it to try to munmap
or close invalid handled when released if the attempt to map
the file failed.
Added a couple of new String8 conveniences for formatting strings.
Modified Tokenizer to fall back to open+read when mmap fails since
we can't mmap sysfs files as needed to open the virtual key
definition files in /sys/board_properties/.
Change-Id: I6ca5e5f9547619fd082ddac47e87ce185da69ee6
The ShortcutManager used to only receive the key code of the key event
that triggered the shortcut. This change now provides the shortcut
manager with the whole key event so it can look up the associated
character using the correct key character map.
To make this more efficient, added a mechanism for recycling
key events. At the moment it is only used by key events owned by the
system process, since clients of the existing API (such as Views)
might continue to hold on to key events after dispatch has finished so
they would break if the key event were recycled by the framework.
Deprecated KeyCharacterMap.BUILT_IN_KEYBOARD.
Change-Id: I4313725dd63f2be01c350c005a41c7fde9bc67e8
Fixed a bug with dpad keys on external keyboards being rotated
according to the display orientation by adding a new input device
configuration property called "keyboard.orientationAware".
Added a mechanism for overriding the key layout and key character
map in the input device configuration file using the new
"keyboard.layout" and "keyboard.characterMap" properties.
Also added "trackball.orientationAware", "touch.orientationAware" and
"touch.deviceType" configuration properties.
Rewrote the configuration property reading code in native code
so that it can be used by EventHub and other components.
Added basic support for installable idc, kl, and kcm files
in /data/system/devices. However, there is no provision for
copying files there yet.
Disabled long-press character pickers on full keyboards so that
key repeating works as expected.
Change-Id: I1bd9f0c3d344421db444e7d271eb09bc8bab4791
BREAKING CHANGE: Redesigned the key character map format to
accomodate full keyboards with more comprehensive suite of modifiers.
Old key character maps will not work anymore and must be updated.
The new format is plain text only and it not compiled to a binary
file (so the "kcm" tool will be removed in a subsequent check-in).
Added FULL keyboard type to support full PC-style keyboards.
Added SPECIAL_FUNCTION keyboard type to support special function
keypads that do not have any printable keys suitable for typing
and only have keys like HOME and POWER
Added a special VIRTUAL_KEYBOARD device id convention that maps
to a virtual keyboard with a fixed known layout. This is designed
to work around issues injecting input events on devices whose
built-in keyboard does not have a useful key character map (ie.
when the built-in keyboard is a special function keyboard only.)
Modified several places where events were being synthesized
to use the virtual keyboard.
Removed support for the "qwerty" default layout.
The new default layout is "Generic". For the most part "qwerty"
was being used as a backstop in case the built-in keyboard did
not have a key character map (probably because it was a special
function keypad) and the framework needed to be able to inject
key events anyways. The latter issue is resolved by using the
special VIRTUAL_KEYBOARD device instead of BUILT_IN_KEYBOARD.
Added the concept of a key modifier behavior so that
MetaKeyKeyListener can distinguish between keyboards that use
chorded vs. toggled modifiers.
Wrote more robust key layout and key character map parsers
to enable support for new keyboard features and user installable
key maps.
Fixed a bug in InputReader generating key ups when keys
are released out of sequence.
Updated tons of documentation.
Currently QwertyKeyListener is being used for full keyboards
with autotext and capitalization disabled. This mostly works
but causes some problems with character pickers, etc.
These issues will be resolved in subsequent changes.
Change-Id: Ica48f6097a551141c215bc0d2c6f7b3fb634d354
Split out all the UTF-8/16/32 handling code from String8/16 to its own
file to allow better reuse of code.
Change-Id: If9ce63920edc75472c38da4adce0d13cda9ad2f7
New default only applies to applications with targetSdkVersion >=
HONEYCOMB. Old applications default to no touch splitting for
their windows.
In addition, enabled split touch for various system windows.
Bug: 3049580
Change-Id: Idc8da9baa2cd8e1e4e76af8967d7b6a5ccb94427
Refactored ViewRoot, NativeActivity and related classes to tell the
dispatcher whether an input event was actually handled by the application.
This will be used to move more of the global default key processing
into the system server instead of the application.
Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
This change defines a macro NUM_FRAME_BUFFERS to set
the desired number of framebuffers to be used by the UI,
instead of hard-coding 2 framebuffers.
Aditional logic has been added to handle the initialization
and destruction of NUM_FRAME_BUFFERS buffers.
Change-Id: I3a4bfec3e0f453432f2ffebf084c00f574d3be46
Signed-off-by: Rodrigo Obregon <robregon@ti.com>
Allow a caller to request a different density than their current display
allows. This can mean a device displaying mdpi can get a resource that's
in hdpi and have it pretend to be in mdpi resolution. If a drawable
that's returned is not in the requested density, it will set it at the
appropriate density to be scaled up later on.
The API for this is hidden currently.
Bug: 3134688
Change-Id: I6c3908cbdef4907b8d3f1576df9e3b0e7af1755a
This patch makes the dispatcher drop all of its state when it is
disabled (when the screen turns off). This ensures that the dispatcher
does not get stuck thinking a pointer is still down if the screen
turned off while the user was touching the display (such as a fat touch
while hitting the power button).
Bug: 3098344
Change-Id: If50ef5804870aa1acd3179fd4b40e3cda58dd39d
Fixed a bug where we would lose the first touch point when swiping out of
the virtual key area.
Fixed a bug where we would not send an ACTION_MOVE event in cases where
individual pointers went down/up and the remaining pointers actually moved.
This is important since many applications do not handle pointer movements
during ACTION_POINTER_DOWN or ACTION_POINTER_UP. In the case of
ACTION_POINTER_UP the movement was completely lost since all pointers were
dispatched using their old location rather than the new location.
Improved motion event validation to check for duplicate pointer ids.
Added an input source constant that was missing from the NDK api but
defined in the framework api.
Added a timestamp when reporting added/removed devices in EventHub.
Bug: 3070082
Change-Id: I3206a030f43b7616e2f48006e5a9d522c4d92e56
Merge commit 'f2c406030874b355ca9e4e67cc0e3aff6103c23e'
* commit 'f2c406030874b355ca9e4e67cc0e3aff6103c23e':
Fix bug where home presses were not poking user activity.
Useful for tweaking touch screen alignment without having to modify the
kernel device driver x/y axis bounds.
Change-Id: I6ca43d3c138548f9dfb76aa33150a0c853698fb6
We now poke user activity twice: once upon dequeueing an event
for dispatch and then again just before we dispatch it. The second
poke is to compensate for the fact that it can take a few seconds to
identify the dispatch target (if the application is responding slowly)
but we want to keep the display from going to sleep for X amount of time
after the app gets a chance to actually receive the event. This mirrors
pre-Gingerbread behavior.
Removed some unnecessary code that filters user activity pokes when sending
events to KeyGuard. We don't need this because KeyGuard already tells the
power manager to disable user activity.
Bug: 3101397
Change-Id: I8c3a77601fdef8f584e84cfdd11aa79da0ff51db
Manual merge from Gingerbread.
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: Id876736fd8bf332ff9a5428bde59f5268aa49c3a
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: I8f8398f4fdeb0469e5d71124c21bedf121bd8c07
Added new key maps for external keyboards. These maps are intended to
be shared across devices by inheriting the "keyboards.mk" product
makefile as part of the device's product definition.
One of the trickier changes here was to unwind some code in
MetaKeyKeyListener that assumed that only the low 8 bits of the meta key
state were actually used. The new code abandons bitshifts in favor
of simple conditionals that are probably easier to read anyways.
The special meta key state constants used by MetaKeyKeyListener
are now (@hide) defined in KeyEvent now so as to make it clearer that they
share the same code space even if those codes are not valid for KeyEvents.
The EventHub now takes care of detecting the appropriate key layout
map and key character map when the device is added and sets system
properties accordingly. This avoids having duplicate code in
KeyCharacterMap to probe for the appropriate key character map
although the current probing mechanism has been preserved for legacy
reasons just in case.
Added support for tracking caps lock, num lock and scroll lock and
turning their corresponding LEDs on and off as needed.
The key character map format will need to be updated to correctly support
PC style external keyboard semantics related to modifier keys.
That will come in a later change so caps lock doesn't actually do
anything right now except turn the shiny LEDs on and off...
Added a list of symbolic key names to KeyEvent and improved the toString()
output for debug diagnosis. Having this list in a central place in the
framework also allows us to remove it from Monkey so there is one less
thing to maintain when we add new keycodes.
Bug: 2912307
Change-Id: If8c25e8d50a7c29bbf5d663c94284f5f86de5da4
Merge commit '5bfa3a34eaef759c3ec4def76f646eb1c0bf997f'
* commit '5bfa3a34eaef759c3ec4def76f646eb1c0bf997f':
implement part of [3094280] New animation for screen on and screen off
Added support for calibrating touch size for devices that report
size as an area measurement rather than as a width.
Fixed some bugs.
Bug: 3096045
Change-Id: I30a12e73752883516ed054f8af407204bca45814
3097475: Animation setting should control the screen on animation
3096779: CRT power-on animation can briefly show the top app instead of lockscreen
There is now a parameter that controls wether the ON and/or OFF animation are
performed. we also always clear the screen to black on power off, to make
sure it won't briefly appear on power on.
HOWEVER, 3096779 is not 100% fixed in the case where we're doing the animation
because there is a race, where SF doesn't wait (b/c it doesn't know) for the
framework to have redrawn the lockscreen.
Change-Id: Ie0f02c9225fcdf24b1e8907e268eb7da2c5b0a03
Merge commit '9a12a3c8d4bb20042cf69e07d268e3a04ac71f96'
* commit '9a12a3c8d4bb20042cf69e07d268e3a04ac71f96':
Remove dead code, and make the animation a setting.
turn off the electron beam
Switch to using PBKDF2 for the key generation for OBBs. Any previously
generated OBBs will stop being read correctly. A small pbkdf2gen program
is available to allow generation of appropriate keys with the salts.
Bug: 3059950
Change-Id: If4305c989fd692fd1150eb270dbf751e09c37295
Bug #3081600
The OpenGL renderer in libhwui uses a single EGL context per process and
thus create it with an RGBA 8888 EGL configuration. To ensure that all
windows are compatible with this configuration, this change modifies
the window manager and SurfaceFlinger.
The window manager now checks the window's flags and if the window is
hardware accelerated, it forces the window's pixel format to be
translucent when creating the surface. The window itself is still
marked as opaque if we know that the window will be opaque on screen.
This keeps existing optimizations in place.
Similarly in SurfaceFlinger, a translucent Surface can now be created
with the Surface.OPAQUE flag, indicating SurfaceFlinger that the surface
does not require blending, despite its RGBA 8888 configuration.
Change-Id: Ic747b6b12564ba064412d842117880fcc199eb7c
Copies the input state to the destination window and sends synthesic
cancelation events to the source window.
Change-Id: Ia75820b0d756ed5d6cd22dce7830251ac85141ed
Added the concept of a "trusted" event to distinguish between events from
attached input devices or trusted injectors vs. other applications.
This change enables us to move certain policy decisions out of the
dispatcher and into the policy itself where they can be handled more
systematically.
Cherry pick of b931a1b4 from gingerbread into master.
Change-Id: I700a5f07b8b227878cea9437a289a45a245c0424
Merge commit '41aabeb51305d19747687f246080f44fc2a74435'
* commit '41aabeb51305d19747687f246080f44fc2a74435':
Added more robust tracking and cancelation of events.
Added the concept of a "trusted" event to distinguish between events from
attached input devices or trusted injectors vs. other applications.
This change enables us to move certain policy decisions out of the
dispatcher and into the policy itself where they can be handled more
systematically.
Change-Id: I4d56fdcdd31aaa675d452088af39a70c4e039970
This change fixes several issues where events would be dropped in the
input dispatch pipeline in such a way that the dispatcher could not
accurately track the state of the input device.
Given more robust tracking, we can now also provide robust cancelation
of input events in cases where an application might otherwise become
out of sync with the event stream due to ANR, app switch, policy decisions,
or forced focus transitions.
Pruned some of the input dispatcher log output.
Moved the responsibility for calling intercept*BeforeQueueing into
the input dispatcher instead of the input reader and added support for
early interception of injected events for events coming from trusted
sources. This enables behaviors like injection of media keys while
the screen is off, haptic feedback of injected virtual keys, so injected
events become more "first class" in a way.
Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
- Register buffers with Gralloc when unflattening a GraphicBuffer (rather than
doing it in the Surface class).
- Add support for a GraphicBuffer that wraps an android_native_window_t*.
Change-Id: I029ac086111bbac800e5ca37eb505f558b718cd8
Merge commit '22cb4ef8ce9c4d5536ac5cee5c40b82bfa56ccc5'
* commit '22cb4ef8ce9c4d5536ac5cee5c40b82bfa56ccc5':
Switch Looper back to using poll() instead of epoll().
This change depends on the kernel having been patched to use hrtimers
instead of jiffies for scheduling epoll timeouts.
Change-Id: I216bc1c4f565e67ebcb3d2ba4280cb615932bb9e
Added a couple of micro-optimizations to avoid calling wake() unnecessarily
and reduce JNI overhead slightly.
Fixed a minor issue where we were not clearing the "next" field of Messages
returned by the MessageQueue so the Message would hold on to its successor
and potentially prevent the GC from collecting it if the message were leaked
somehow.
Change-Id: I488d29417ce0cdd7d0e447cda76ec978ef7f811c
Merge commit 'ff04e97faf75c435e453d4c1caf7eeac8b9c1ceb'
* commit 'ff04e97faf75c435e453d4c1caf7eeac8b9c1ceb':
fix [2835280] Add support for cancelling buffers to ANativeWindow
There is a new ANativeWindow::cancelBuffer() API that can be used to
cancel any dequeued buffer, BEFORE it's been enqueued. The buffer is
returned to the list of availlable buffers. dequeue and cancel are not
mutually thread safe, they must be called from the same thread or
external synchronization must be used.
Change-Id: I86cc7985bace8b6a93ad2c75d2bef5c3c2cb4d61
the core screenshot function now can capture the screen at any lower resolution
performing bilinear filtering.
we also now have some client code to interface with the screenshot service.
it's now possible to request a screenshot at a lower resolution.
Change-Id: I33689bba98507ab928d0898b21596d0d2fe4b953
AssetManager instances are created by zygote and passed to all its
children so that they don't have to individually open
frameworks-res.apk. This creates a problem for determining the current
file offset when using lseek() on those files, because you can't
guarantee the cross-process locking of a mutex. Luckily, Linux
implements pread() to get around this suckiness.
The problem is that only Linux implements this, so we have to keep the
old locking for use on host builds with aapt and friends. aapt doesn't
have this same problem of sharing file descriptors across forked
processes, so we can keep the local AutoMutex to protect accesses of
those files.
Change-Id: Ibe9f11499a53fe345f50fbaea438815ec0fd363e
Merge commit 'e11b76d3efb056edea301d53a354d0730adf3520'
* commit 'e11b76d3efb056edea301d53a354d0730adf3520':
Minor logging changes to input dispatcher to help with debugging.
This change narrows the opportunity for a race condition setting the
resource Configuration while devices are being updated.
Change-Id: I58efa563f4129ab0fce7108511d16a99dff7e451
There is apparently still a race upon reading the entry Local File
Header that can't be tracked down, so move the LFH check inside the
mutex-protected block so we can call lseek again to see where we are
when we log an error.
Also, close() can fail so use TEMP_FAILURE_RETRY on it so we don't
unwittingly leak file descriptors when Mean Mr. EINTR comes a-knocking.
Change-Id: I753abad0bd882fe28f7281c406fa76f64393ef4c
Added dumpsys reporting to EventHub.
Made the formatting a bit clearer.
Added 'Locked' suffix to some internal methods of EventHub.
Change-Id: Ic449560bcce378f6361895d27c66854e9724abb0
Merge commit '57fa3e8b4c94125ddb5be015dd7fbde4a458894f'
* commit '57fa3e8b4c94125ddb5be015dd7fbde4a458894f':
Support haptic feedback for virtual keys defined in key layout.
the core screenshot function now can capture the screen at any lower resolution
performing bilinear filtering.
we also now have some client code to interface with the screenshot service.
it's now possible to request a screenshot at a lower resolution.
Change-Id: I5a3b0e431421800e3aad601d9af8f94adffbc71f
This feature is currently used to enable dragging the start and end
selection handles of a TextView at the same time. Could be used for
other things later.
Deleted some dead code in ArrowKeyMovementMethod and CursorControllers.
Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
Merge commit '495ad4f22096aa172d025c16c25497e7dad8f2bd'
* commit '495ad4f22096aa172d025c16c25497e7dad8f2bd':
simple test app for screen capture API
add support for [1974164] Be able to take a screen shot on the device
screenshots are taken using ISurfaceComposer::captureScreen() which returns
the size of the screenshot and an IMemoryHeap containing the data.
screenshots have limitations:
- they will always fail if a secure window is up on screen
- require GL_OES_framebuffer_object extension
- in some situation, video planes won't been captured
Change-Id: I741c68a2d2984fb139039301c3349e6780e2cd58
Since we switched to seeking to the LFH to verify its existence instead
of a huge mmap of the file, we have to guarantee that another seek
doesn't happen before we finish our read on the LFH.
Change-Id: If8135d9cb6f2f5cc4db734eafa4f6b5f6269c62a
Also fix a Valgrind complaint by zeroing out the entire epoll event
struct since otherwise the data field union would be partly
uninitialized (but not in a harmful way).
Change-Id: I2091ce517e87fcad7c9caf90e2c5e4854a7ca465
Merge commit 'bc9599d48c79c18d306a13f51af9ef2aac92cdca'
* commit 'bc9599d48c79c18d306a13f51af9ef2aac92cdca':
Looper: Drop default parameters in favor of a safer overload.
The idea is that if you're writing code that wants fd/events/data on
return from pollOnce() / pollAll() you should really pass in all of those
arguments. When I changed the Looper API earlier, it was difficult
to ensure that all callers were passing the right parameters since they
were relying on default parameters to some degree so usage mistakes
would not have been caught by the compiler.
Change-Id: I1f2812894270aaf1515017ac1616b6b312d9b565
Merge commit '7642c82c291051919aad87c797e2dc1d77ed55e1'
* commit '7642c82c291051919aad87c797e2dc1d77ed55e1':
Make input dispatcher only ANR for foreground windows.
Redesigned the input dispatcher's ANR timeout mechanism so it is much
closer to Froyo's policy. ANR is only ever signalled if the dispatcher
is waiting on a window to finish processing its previous event(s) and
there is new pending input.
In the old code, we tracked the dispatch timeout separately for each
input channel. This was somewhat complicated and also resulted in the
situation where applications could ANR long after the user had pushed
them into the background.
Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
Merge commit '310da64d78750cdba4349d7cc0a268c07155569d'
* commit '310da64d78750cdba4349d7cc0a268c07155569d':
fix a typo where the eventtags code were wrong
Merge commit '14bc6b5d0677e5c454a67775c852f90389bb4567'
* commit '14bc6b5d0677e5c454a67775c852f90389bb4567':
Replace epoll() with poll() and rename PollLoop to Looper.
As part of this change, consolidated and cleaned up the Looper API so
that there are fewer distinctions between the NDK and non-NDK declarations
(no need for two callback types, etc.).
Removed the dependence on specific constants from sys/poll.h such as
POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for
the events that it supports. That should help make any future
under-the-hood implementation changes easier.
Fixed a couple of compiler warnings along the way.
Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
There are 16 events logged in the event log:
SF_APP_DEQUEUE_BEFORE
SF_APP_DEQUEUE_AFTER
SF_APP_LOCK_BEFORE
SF_APP_LOCK_AFTER
SF_APP_QUEUE
SF_REPAINT
SF_COMPOSITION_COMPLETE
SF_UNLOCK_CLIENTS
SF_SWAP_BUFFERS
SF_REPAINT_DONE
SF_FB_POST_BEFORE
SF_FB_POST_AFTER
SF_FB_DEQUEUE_BEFORE
SF_FB_DEQUEUE_AFTER
SF_FB_LOCK_BEFORE
SF_FB_LOCK_AFTER
all events log the buffer conserned and a timestamp in microseconds.
by default the logging is not enabled, to turn it on:
adb shell service call SurfaceFlinger 1006 i31 1
adb shell setprop debug.graphic_log 1
The effect is immediate in SurfaceFlinger, but applications need to be
restarted.
Change-Id: Ifc2e31f7aed072d9a7dede20ff2ce59231edbec1
This change is essentially a rewrite of the main input dispatcher loop
with the target identification folded in. Since the input dispatcher now
has all of the window state, it can make better decisions about
when to ANR.
Added a .5 second deadline for processing app switch keys. This behavior
predates Gingerbread but had not previously been ported.
Fixed some timing inaccuracies in the ANR accounting that could cause
applications to ANR sooner than they should have.
Added a mechanism for tracking key and motion events that have been
dispatched to a window so that appropriate cancelation events can be
synthesized when recovering from ANR. This change helps to keep
applications in sync so they don't end up with stuck buttons upon
recovery from ANRs.
Added more comments to describe the tricky parts of PollLoop.
Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the
input manager whenever another visible window is partly or wholly obscured
the target of a touch event so that applications can filter touches
accordingly.
Added a "filterTouchesWhenObscured" attribute to View which can be used to
enable filtering of touches when the view's window is obscured.
Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
Merge commit 'a1205f07a6f0c745e8f42f16fe38c06af04143c7'
* commit 'a1205f07a6f0c745e8f42f16fe38c06af04143c7':
Modify native ALooper to take an explicit ident.
The ALooper API now uses an explicit "identifier" for the integer
that is returned rather than implicitly using the fd. This allows
the APIs that had the fd to be a little more sane.
Change-Id: I8507f535ad484c0bdc4a1bd016d87bb09acd7ff0
This was causing stack stitching problems where a one-way call with
violations followed by a two-way call without violations was getting
the previous one-way call's violation stack stitched on to the second
caller's stack.
The solution is a little more indirect than I would've liked
(preserving the binder's onTransact flags until enforceInterface) but
was seemingly necessary to work without changing the AIDL compiler.
It should also be sufficiently cheap, since no new calls to
thread-local IPCThreadState lookups were required. The additional
work is just same-thread getter/setters on the existing
IPCThreadState.
Change-Id: I4b6db1d445c56e868e6d0d7be3ba6849f4ef23ae
Finished the input device capability API.
Added a mechanism for calibrating touch devices to obtain more
accurate information about the touch contact area.
Improved pointer location to show new coordinates and capabilities.
Optimized pointer location display and formatting to avoid allocating large
numbers of temporary objects. The GC churn was causing the application to
stutter very badly when more than a couple of fingers were down).
Added more diagnostics.
Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
Merge commit 'bc4389edfbb5777aec1a9af7863b2ca3ade2fa64'
* commit 'bc4389edfbb5777aec1a9af7863b2ca3ade2fa64':
fix [2931513] Add support for setting the orientation of an ANativeWindow
This change makes the camera HAL interface take an ANativeWindow interface from
which all the camera preview buffers will be allocated. The framework code
running in application processes now passes a Surface object rather than an
ISurface to the camera server via Binder when setting the preview surface. The
camera server then forwards that Surface object (which implements the
ANativeWindow interface) to the camera HAL, which uses it to communicate with
SurfaceFlinger to allocate the camera preview buffers.
Change-Id: Ie438f721559cd7de5e4f848a26d96360dda07b5f
commit 35cc68814a9537c31fde146e171e7b0bbdfe211e
Author: Andreas Huber <andih@google.com>
Date: Mon Aug 16 08:48:42 2010 -0700
Only enable support for yuv to yuv conversion on passion, where it's available, use the slower yuv->rgb565 path everywhere else.
commit d8ac5a8814103e60d11d2acf61997fc31a1dc58d
Author: Andreas Huber <andih@google.com>
Date: Fri Aug 13 13:56:44 2010 -0700
The software renderer takes over all rendering, converting from yuv to yuv if possible and rgb565 otherwise.
commit 684972074b74318bdcb826ed9b5b0864d2d2e273
Author: Andreas Huber <andih@google.com>
Date: Fri Aug 13 09:34:35 2010 -0700
A first shot at supporting the new rendering APIs.
Change-Id: Iea9b32856da46950501f1a700f616b5feac710fd
Merge commit '33992d4195fe55f42ba6919f5a07707a51a12d5d'
* commit '33992d4195fe55f42ba6919f5a07707a51a12d5d':
Fix some input device mapping bugs with certain drivers.
On single-touch devices, pointer up/down is signalled by a BTN_TOUCH
key event. Previously we handled BTN_TOUCH immediately but some drivers
may produce the sequence BTN_TOUCH, ABS_X, ABS_Y, SYN_REPORT on pointer down
which caused us to emit a bad initial pointer down location.
Now we wait for SYN_REPORT before reporting the up or down.
On multi-touch devices, pointer up can be signalled by as little as
the sequence SYN_MT_REPORT, SYN_REPORT. This change ensures that we
handle this case.
Added support for reading ABS_MT_PRESSURE when available.
Corrected mapping of touchMajor/touchMinor on single touch devices.
Minor code cleanup.
Change-Id: Ic7ec4811241ed85a06e59b8a839ca05180d491d4
Merge commit '72ce42352c1c229e05d910b4176f3cddb608e814' into gingerbread-plus-aosp
* commit '72ce42352c1c229e05d910b4176f3cddb608e814':
Fix possible race conditions during channel unregistration.
Sometimes the wrong fd was accessed when the device was addressed
by device id.
The earlier implementation assumed that two arrays were in sync
but one of them was compacted when devices were removed. Instead
of that dependency the device now keeps track of it's file descriptor.
Change-Id: Ib0f320603aafb07ded354bc3687de9759c9068f2
* Add flags field in OBB footer to support overlays.
* Remove unused 'crypto' and 'filesystem' fields in obbtool (could
later be supported in the "flags" field of the OBB footer).
* Add notes to document OBB classes before shipping.
Change-Id: I386b43c32c5edef55210acb5d3322639c08010ba
Previously, the input dispatcher assumed that the input channel's
receive pipe file descriptor was a sufficiently unique identifier for
looking up input channels in its various tables. However, it can happen
that an input channel is disposed and then a new input channel is
immediately created that reuses the same file descriptor. Ordinarily
this is not a problem, however there is a small opportunity for a race
to arise in InputQueue.
When InputQueue receives an input event from the dispatcher, it
generates a finishedToken that encodes the channel's receive pipe fd,
and a sequence number. The finishedToken is used by the ViewRoot
as a handle for the event so that it can tell the InputQueue when
the event has finished being processed.
Here is the race:
1. InputQueue receives an input event, assigns a new finishedToken.
2. ViewRoot begins processing the input event.
3. During processing, ViewRoot unregisters the InputChannel.
4. A new InputChannel is created and is registered with the Input Queue.
This InputChannel happens to have the same receive pipe fd as
the one previously registered.
5. ViewRoot tells the InputQueue that it has finished processing the
input event, passing along the original finishedToken.
6. InputQueue throws an exception because the finishedToken's receive
pipe fd is registered but the sequence number is incorrect so it
assumes that the client has called finish spuriously.
The fix is to include a unique connection id within the finishedToken so
that the InputQueue can accurately confirm that the token belongs to
the currently registered InputChannel rather than to an old one that
happened to have the same receive pipe fd. When it notices this, it
ignores the spurious finish.
I've also made a couple of other small changes to avoid similar races
elsewhere.
This patch set also includes a fix to synthesize a finished signal
when the input channel is unregistered on the client side to
help keep the server and client in sync.
Bug: 2834068
Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
Merge commit 'ddbcce3afbb38680fb84583f7bad5209307e6459'
* commit 'ddbcce3afbb38680fb84583f7bad5209307e6459':
Keep track of remaining fd when devices are removed
Merge commit 'f66f8a58cc4412bd258e1d5b11cac17a617bdc58'
* commit 'f66f8a58cc4412bd258e1d5b11cac17a617bdc58':
Add support for the PointerLocation overlay.
This change involves adding a new method to IWindowManager,
monitorInput() that returns an InputChannel to receive a copy of all
input that is dispatched to applications. The caller must have
the READ_INPUT_STATE permission to make this request (similar to
other window manager methods such as getKeycodeState).
Change-Id: Icd14d810174a5b2928671ef16de73af88302aea0
Add "obbtool" host command for adding, removing, and querying Opaque
Binary Blob (OBB) information from a file.
Change-Id: Id2ac41e687ad2a500c362616d6738a8ae7e8f5c3
The LHS was ignored when using:
String8 + String8
String8 + (const char*)
Add unit tests for above.
Bug: 2898473
Change-Id: Ic8fe7be668b665c36aaaa3fc3c3ffdfff0fbba25
Improved PointerLocation tool to use VelocityTracker more efficiently
and correctly when multiple pointers are down.
Fixed a bug in TouchInputMapper where it was not correctly copying
the id to index map in the last touch data. This could cause strange
behavior on secondary pointer up events.
Also added finished callback pooling in InputQueue.
Change-Id: Ia85e52ac2fb7350960ea1d7edfbe81a1b3e8267b
Also fixed bug where old touch screen size could be reported by
getMotionRange if an orientation change occurred but the user has not
yet touched the screen.
Bug: 2877345
Change-Id: I7878f47458f310ed6ebe6a5d1b2c9bec2c598ab9
Exposed the new "min delay" sensor property through native and
java sensor apis. This allows the caller to know what is the
maximum rate at which a sensor can return events, or, if a sensor
works in "update" mode (events returned only when the value changes).
Also augmented SensorManager.regusterSensorEvent() so that it can
accept a value in microsecond in addition to the 4 constants already
defined.
Change-Id: If425e9979892666df8c989d7de3c362230fa19e0
Added a new asynchronous injection mode and made the existing
synchronization mechanism more robust.
Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
Added a new asynchronous injection mode and made the existing
synchronization mechanism more robust.
Change-Id: I0464f70ff5cbd519dbb02686b2cb5d810fe7dbb2
Merge commit '9362ea760f565389f5accce7e17476d05510ed59'
* commit '9362ea760f565389f5accce7e17476d05510ed59':
fix [2873058] Surface::dequeueBuffer blocks on last buffer, i.e. cannot dequeue all allocated buffers at once.
Compressed assets larger than one megabyte are now decompressed on demand
rather than being decompressed in their entirety and held in memory. Reading
the data in order is relatively efficient, as is seeking forward in the stream.
Seeking backwards is supported, but requires reprocessing the compressed data
from the beginning, so is very inefficient.
In addition, the size limit on compressed assets has been eliminated.
Change-Id: I6e68247957e6c53e7e8ba70d12764695f1723bad
Merge commit '9795a25da060f9a7df87da8ab43fb1086d4322a5'
* commit '9795a25da060f9a7df87da8ab43fb1086d4322a5':
Refactor input reader to support new device types more easily.
Refactored the input reader so that each raw input protocol is handled
by a separate subclass of the new InputMapper type. This way, behaviors
pertaining to keyboard, trackballs, touchscreens, switches and other
devices are clearly distinguished for improved maintainability.
Added partial support for describing capabilities of input devices
(incomplete and untested for now, will be fleshed out in later commits).
Simplified EventHub interface somewhat since InputReader is taking over
more of the work.
Cleaned up some of the interactions between InputManager and
WindowManagerService related to reading input state.
Fixed swiping finger from screen edge into display area.
Added logging of device information to 'dumpsys window'.
Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
this situation happened when the last buffer needed to be resized
(or allocated, the first time). the assumption was that the buffer
was in use by SF itself as the current buffer (obviously, this
assumption made no sense when the buffer had never been allocated, btw).
the system would wait until some other buffer became the "front" buffer.
we fix this problem by entirely removing the requirement that the
buffer being resized cannot be the front buffer. instead, we just
allocate a new buffer and replace the front buffer by the new one.
the downside is that this uses more memory (an extra buffer) for a
brief amount of time while the old buffer is being reallocated and
before it has actually been replaced.
Change-Id: I022e4621209474ceb1c671b23deb4188eaaa7285
remove old sensor service and implement SensorManager
on top of the new (native) SensorManger API.
Change-Id: Iddb77d498755da3e11646473a44d651f12f40281
Merge commit '04b953132edb5482f0aa6d992f89e7016961528c'
* commit '04b953132edb5482f0aa6d992f89e7016961528c':
Re-use existing Surface objects when reading them from parcels.
This change adds a process-global cache of previously deserialized Surface
objects so that if a Surface object wrapping the same ISurface gets received
again the same Surface can be used. This is important because the 'tail'
pointer in the SharedBufferClient is stored only on the client side, and needs
to be the same for all the Surface objects wrapping an ISurface instance. This
solves the problem by making there only be one Surface object wrapping an
ISurface per process.
Change-Id: I4bf0b8787885c56277622fca053022d2bb638902
Add dumpsys integration for the native input dispatcher.
Add some InputDevice API stubs.
Add an appendFormat helper method to String8 for printf style
string formatting mainly for debugging purposes.
Use generic ArrayList<WindowState> everywhere in WindowManagerService
to eliminate unnecessary casts all over.
Change-Id: I9d1e3bd90eb7222d10620200477f11b7bfd25e44
Merge commit '078ccbdbb98c118aa87cab2fef61ff90dd128358'
* commit '078ccbdbb98c118aa87cab2fef61ff90dd128358':
Add native C APIs for working with the Asset Manager
This significantly re-works the native key dispatching code to
allow events to be pre-dispatched to the current IME before
being processed by native code. It introduces one new public
API, which must be called after retrieving an event if the app
wishes for it to be pre-dispatched.
Currently the native code will only do pre-dispatching of
system keys, to avoid significant overhead for gaming input.
This should be improved to be smarted, filtering for only
keys that the IME is interested in. Unfortunately IMEs don't
currently provide this information. :p
Change-Id: Ic1c7aeec8b348164957f2cd88119eb5bd85c2a9f
Added several new coordinate values to MotionEvents to capture
touch major/minor area, tool major/minor area and orientation.
Renamed NDK input constants per convention.
Added InputDevice class in Java which will eventually provide
useful information about available input devices.
Added APIs for manufacturing new MotionEvent objects with multiple
pointers and all necessary coordinate data.
Fixed a bug in the input dispatcher where it could get stuck with
a pointer down forever.
Fixed a bug in the WindowManager where the input window list could
end up containing stale removed windows.
Fixed a bug in the WindowManager where the input channel was being
removed only after the final animation transition had taken place
which caused spurious WINDOW DIED log messages to be printed.
Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
Merge commit 'db386f2c263c6e9e4b825d4c9a320849f8f2c916'
* commit 'db386f2c263c6e9e4b825d4c9a320849f8f2c916':
first step at implementing the native sensor support
in this commit:
- implemented the C stub
- implemented the binder interfaces involved
- implemented most of the C++ client side
missing:
- SensorManager cannot connect to the SensorServer yet
(because there is no SensorServer yet)
Change-Id: I75010cbeef31c98d6fa62fd5d388dcef87c2636b
Merge commit 'f8d9379bd834573feca085284970cf686993c330'
* commit 'f8d9379bd834573feca085284970cf686993c330':
IME events are now dispatched to native applications.
And also:
- APIs to show and hide the IME, and control its interaction with the app.
- APIs to tell the app when its window resizes and needs to be redrawn.
- API to tell the app the content rectangle of its window (to layout
around the IME or status bar).
There is still a problem with IME interaction -- we need a way for the
app to deliver events to the IME before it handles them, so that for
example the back key will close the IME instead of finishing the app.
Change-Id: I37b75fc2ec533750ef36ca3aedd2f0cc0b5813cd
Add native Parcel methods analogous to the Java versions.
Currently, these don't do much, but upcoming StrictMode work changes
the RPC calling conventions in some cases, so it's important that
everybody uses these consistently, rather than having a lot of code
trying to parse RPC responses out of Parcels themselves.
As a summary, the current convention that Java Binder services use is
to prepend the reply Parcel with an int32 signaling the exception
status:
0: no exception
-1: Security exception
-2: Bad Parcelable
-3: ...
-4: ...
-5: ...
... followed by Parceled String if the exception code is non-zero.
With an upcoming change, it'll be the case that a response Parcel can,
non-exceptionally return rich data in the header, and also return data
to the caller. The important thing to note in this new case is that
the first int32 in the reply parcel *will not be zero*, so anybody
manually checking for it with reply.readInt32() will get false
negative failures.
Short summary: If you're calling into a Java service and manually
checking the exception status with reply.readInt32(), change it to
reply.readExceptionCode().
Change-Id: I23f9a0e53a8cfbbd9759242cfde16723641afe04
Merge commit 'b14f325a0118ffce286155caaabaae149653462c'
* commit 'b14f325a0118ffce286155caaabaae149653462c':
Add ANativeWindow API for directly drawing to the surface bits.
Also other cleanup and fixes:
- We now properly set the default window format to 565.
- New APIs to set the window format and flags from native code.
- Tweaked glue for simpler handling of the "destroy" message.
- Um, other stuff.
Change-Id: Id7790a21a2fa9a19b91854d225324a7c1e7c6ade
This factors out the boiler-plate code from the sample
app to a common glue code that can be used for everyone
writing this style of app: a dedicated app thread that
takes care of waiting for events and processing them.
As part of doing this, ALooper has a new facility to allow
registration of fds that cause ALooper_pollOnce() to return
the fd that has data, allowing the app to drive the loop
without callbacks. Hopefully this makes some people feel better. :)
Also do some other cleanup of the ALooper API, plus some
actual documentation.
Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
Removed old input dispatch code.
Refactored the policy callbacks.
Pushed a tiny bit of the power manager state down to native.
Fixed long press on MENU.
Made the virtual key detection and cancelation a bit more precise.
Change-Id: I5d8c1062f7ea0ab3b54c6fadb058c4d5f5a9e02e
This allows us to avoid exposing the file descriptor of
the event queue; instead, you attach an event queue to
a looper. This will also should allow native apps to be
written without the need for a separate thread, by attaching
the event queue to the main thread's looper and scheduling
their own messages there.
Change-Id: I38489282635895ae2cbfacb88599c1b1cad9b239
Not yet hooked up to anything in the NDK, but requires renaming
the existing android_native_window_t type everywhere.
Change-Id: Iffee6ea39c93b8b34e20fb69e4d2c7c837e5ea2e
This change mainly unwinds a premature optimization in the
dispatch pipeline.
To test HOME injection, run 'adb shell input keyevent 3'.
Change-Id: I1c4b7377c205da7c898014b8b07fc6dc1d46e4dd
The native code now maintains a list of all keys that may use
default handling. If the app finishes one of these keys
without handling it, the key will be passed back off to Java
for default treatment.
Change-Id: I6a842a0d728eeafa4de7142fae573f8c11099e18
Set a default orientation of ROTATION_0.
Added some more careful checks based on whether we have valid
absolute axis information from the driver.
Reset key repeating during configuration changes since the keyboard
device may have been removed.
Change-Id: I685960828acffcb17595fc5683309e8064a76714
Target identification is now fully native.
Fixed a couple of minor issues related to input injection.
Native input enabled by default, can be disabled by setting
WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false.
Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
Sometimes the wrong fd was accessed when the device was addressed
by device id.
The earlier implementation assumed that two arrays were in sync
but one of them was compacted when devices were removed. Instead
of that dependency the device now keeps track of it's file descriptor.
Change-Id: I2b8a793d76b89ab464ae830482b309fe86031671
Merge commit '687f8a2eb78c95bb9974951dbe38124f8543bacb'
* commit '687f8a2eb78c95bb9974951dbe38124f8543bacb':
Fix a bug in sp<> and wp<> which could cause memory corruptions
when assigning a smart pointer to another one, we need to make
sure to read all the data we need from the right-hand-side
reference (the assignee) before we decRef the assigned.
This bug would cause linked-list of smart-pointers to fail
miserably.
Change-Id: Ibb554c15fddf909f7737c632b7c80322e80ea93f
Merge commit 'efcf68aa1fd7fcfd52cf3d2837ed8db8e797194b'
* commit 'efcf68aa1fd7fcfd52cf3d2837ed8db8e797194b':
Start of work on passing around StrictMode policy over Binder calls.
Provides the basic infrastructure for a
NativeActivity's native code to get an object representing
its event stream that can be used to read input events.
Still work to do, probably some API changes, and reasonable
default key handling (so that for example back will still
work).
Change-Id: I6db891bc35dc9683181d7708eaed552b955a077e
Added ANRs handling.
Added event injection.
Fixed a NPE ActivityManagerServer writing ANRs to the drop box.
Fixed HOME key interception.
Fixed trackball reporting.
Fixed pointer rotation in landscape mode.
Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
This is (intendend to be) a no-op change.
At this stage, Binder RPCs just have an additional uint32 passed around
in the header, right before the interface name. But nothing is actually
done with them yet. That value should right now always be 0.
This now boots and seems to work.
Change-Id: I135b7c84f07575e6b9717fef2424d301a450df7b
Merge commit '42bb545a54d89f0ddbb230d7a01ea4210c0f6c00'
* commit '42bb545a54d89f0ddbb230d7a01ea4210c0f6c00':
Even more native input dispatch work in progress.
Added more tests.
Fixed a regression in Vector.
Fixed bugs in pointer tracking.
Fixed a starvation issue in PollLoop when setting or removing callbacks.
Fixed a couple of policy nits.
Modified the internal representation of MotionEvent to be more
efficient and more consistent.
Added code to skip/cancel virtual key processing when there are multiple
pointers down. This helps to better disambiguate virtual key presses
from stray touches (such as cheek presses).
Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
Refactored the code to eliminate potential deadlocks due to re-entrant
calls from the policy into the dispatcher. Also added some plumbing
that will be used to notify the framework about ANRs.
Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
The old dispatch mechanism has been left in place and continues to
be used by default for now. To enable native input dispatch,
edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy.
Includes part of the new input event NDK API. Some details TBD.
To wire up input dispatch, as the ViewRoot adds a window to the
window session it receives an InputChannel object as an output
argument. The InputChannel encapsulates the file descriptors for a
shared memory region and two pipe end-points. The ViewRoot then
provides the InputChannel to the InputQueue. Behind the
scenes, InputQueue simply attaches handlers to the native PollLoop object
that underlies the MessageQueue. This way MessageQueue doesn't need
to know anything about input dispatch per-se, it just exposes (in native
code) a PollLoop that other components can use to monitor file descriptor
state changes.
There can be zero or more targets for any given input event. Each
input target is specified by its input channel and some parameters
including flags, an X/Y coordinate offset, and the dispatch timeout.
An input target can request either synchronous dispatch (for foreground apps)
or asynchronous dispatch (fire-and-forget for wallpapers and "outside"
targets). Currently, finding the appropriate input targets for an event
requires a call back into the WindowManagerServer from native code.
In the future this will be refactored to avoid most of these callbacks
except as required to handle pending focus transitions.
End-to-end event dispatch mostly works!
To do: event injection, rate limiting, ANRs, testing, optimization, etc.
Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
Surfaces can now be parcelized and sent to remote
processes. When a surface crosses a process
boundary, it looses its connection with the
current process and gets attached to the new one.
Change-Id: I39c7b055bcd3ea1162ef2718d3d4b866bf7c81c0
this is called for each relayout() and used to create a full Surface (cpp)
which in turn did some heavy work (including an IPC with surfaceflinger),
most of the time to destroy it immediatelly when the returned surface
(the one in the parcel) was the same.
we now more intelligentely read from the parcel and construct the new
object only if needed.
Change-Id: Idfd40d9ac96ffc6d4ae5fd99bcc0773e131e2267
To allow use of the native CursorWindow class outside of the core framework jni
Change-Id: I72e8dcb91a2c691130c33cdfd9a25d343da1c592
Signed-off-by: Mike Lockwood <lockwood@android.com>
SurfaceComposerClient now only exist on the WindowManager side,
the client side uses the new SurfaceClient class, which only
exposes what a client needs.
also instead of keeping mappings from IBinder to SurfaceComposerClients
we have a SurfaceClient per Surface (referring to the same IBinder), this
is made possible by the fact that SurfaceClient is very light.
Change-Id: I6a1f7015424f07871632a25ed6a502c55abfcfa6
the new native_window_set_buffers_geometry allows
to specify a size and format for all buffers to be
dequeued. the buffer will be scalled to the window's
size.
Change-Id: I2c378b85c88d29cdd827a5f319d5c704d79ba381
this method can be used to change the number of buffers
associated to a native window. the default is two.
Change-Id: I608b959e6b29d77f95edb23c31dc9b099a758f2f
this change introduces R/W locks in the right places.
on the server-side, it guarantees that setBufferCount()
is synchronized with "retire" and "resize".
on the client-side, it guarantees that setBufferCount()
is synchronized with "dequeue", "lockbuffer" and "queue"
Change the way zip archives are handled. This is necessary to deal with
very large (~1GB) APK files, for which our current approach of mapping
the entire file falls over.
We now do the classic scavenger hunt for the End Of Central Directory
magic on a buffer of data read from the file, instead of a memory-mapped
section. We use what we find to create a map that covers the Central
Directory only.
If the caller is interested in unpacking the file contents, we have to
do an additional file read to discover the size of the Local File Header
section so we can skip past it.
This is based on Change I745fb15abb in the dalvik tree. Both
implementations share a common ancestry, but the cost of unifying them
outweighs the benefits of wrapping C calls.
Change-Id: Iddacb50fe913917c2845708a530872d65fdbe620
This change adds the methods necessary to use sp<> to handle refcounting
android_native_window_t and android_native_buffer_t. The new methods forward
the refcounting operations to the corresponding android_native_base_t
functions.
Change-Id: I7de8e262728e439bc1efdf69374a2a9f6f432ced
Merge commit 'ca48c88c3d5733c4405a2fc4f7d9bb7fbba3d43f' into kraken
* commit 'ca48c88c3d5733c4405a2fc4f7d9bb7fbba3d43f':
Make static versions of libutils and libbinder.
Merge commit '8a8658a5de261c2da72d431940877bd054bc9837' into froyo-plus-aosp
* commit '8a8658a5de261c2da72d431940877bd054bc9837':
Make static versions of libutils and libbinder.
Fix some small static-initialization-order issues (and a static-
initializers-missing issue) that result from doing so. The static
libraries don't actually get used for anything real at the moment --
they're used for perf tests of bug 2660235.
Bug: 2660235
Change-Id: Iee2f38f79cc93b395e8d0a5a144ed92461f5ada0
Merge commit 'f78964490d8098387d51444c87bf520ad3f674e2' into kraken
* commit 'f78964490d8098387d51444c87bf520ad3f674e2':
Add new keycodes for the convenience of Japanese IMEs
Call register_localized_collators() with the current locale.
Fixed deserialization problem in DatePicker.
Fix for bug 2467152 files with spaces fail to open.
Set alpha value for newly created dim surface.
telephony: Fix CID when CID is unknown
Not complete, only for experimentation at this point.
This includes a reworking of how screen size configurations are matched,
so that if you are on a larger screen we can select configurations for
smaller screens if there aren't any exactly matching the current screen.
The screen size at which we switch to xlarge has been arbitrarily
chosen; the compatibility behavior has not yet been defined.
Change-Id: I1a33b3818eeb51a68fb72397568c39ab040a07f5
the reason for the above change is that waitForCondition() had become
large over time, mainly to handle error cases, using inlines to
evaluate the condition doesn't buys us much anymore while it increases
code size.
Change-Id: I2595d850832628954b900ab8bb1796c863447bc7
in the undoDequeue() case, 'tail' was recalculated from 'available' and 'head'
however there was a race between this and retireAndLock(), which could cause
'tail' to be recalculated wrongly.
the interesting thing though is that retireAndLock() shouldn't have any impact
on the value of 'tail', which is client-side only attribute.
we fix the race by saving the value of 'tail' before dequeue() and restore it
in the case of undoDequeue(), since we know it doesn't depend on retireAndLock().
Change-Id: I4bcc4d16b6bc4dd93717ee739c603040b18295a0
