This prevents strong reference cycles when the listener implementation also
holds a strong pointer to the ConsumerBase
Bug: 7425644
Change-Id: I1514b13a32b18d421c902dddebec0765a989c55c
This patch adds a hashtable-based LRU cache. This should be
significantly higher performance than the GenerationCache it is intended
to replace. It is a large part of the fix for bug 7271109
TextLayoutCache low-level performance issues.
We added a new method to BasicHashtable to detect when rehashing is
needed, because the internal linked list pointers would get invalidated
by that rehashing.
Also, the hash_type specialized to pointers had a small flaw.
Change-Id: I950c2083f96519777b851dbe157100e0a334caec
Vector::erase may reallocate the Vector's storage while removing an element.
However, erase() calls begin() before calling removeItemsAt(), thus caching
a pointer the the Vector's old storage. If the storage is reallocated,
the iterator returned by erase() will be based on the old storage pointer
and will thus be invalid.
Change-Id: I2450c55fd418e6b1c558a4ca7c024573abbaa098
This change adds support for displays that are not allowed to display surfaces
with the eSecure flag set. All non-virtual displays are considered secure,
while virtual displays have their secure-ness specified at creation time.
Bug: 7368436
Change-Id: I81ad535d2d1e5a7ff78269017e85b111f0098500
The shell property debug.egl.trace can now be set to:
0
disables tracing
1
logs all GL calls
error
checks glGetError after every GL call, logs a stack trace on error
systrace
logs each GL call to systrace
Change-Id: I34a2a2d4e19c373fd9eaa1b0cd93e67c87378996
This change adds a transaction flag for WindowManager to indicate that a
transaction is being used to animate windows around the screen. SurfaceFlinger
will not allow more than one of these transactions to be outstanding at a time
to prevent the animation "frames" from being dropped.
Bug: 7353840
Change-Id: I6488a6e0e1ed13d27356d2203c9dc766dc6b1759
error codes are returned in errno, this caused ::waitForwever()
to only wait for 1 second and return improper error code (-1).
needed to help debugging 7316632
Bug: 7316632
Change-Id: Ie144f614a88393393972a3a770c6b4b0581f961a
This needs the ConsumerBase mutex locked, but wasn't locking it. Two
of the four places that called it already held the lock so were fine.
Now addReleaseFence() takes the lock itself, and I added
addReleaseFenceLocked() for the two already-locked callers, since in
one of them dropping the lock would be inconvenient.
Bug: 7289269
Change-Id: I7a5628adb516f8eec782aa6c14128202f96d7b0a
This allows us to blank and unblank displays other than the built-in
display (e.g. HDMI).
Bug: 7240511
Change-Id: I89ea13f9e497be74c3e1231d0c62fb558e93e0f8
MemoryHeapBase::getBase() returns MAP_FAILED in case or
OOM, not null which is what SF was checking against.
This addresses one of the issues of bug 7230543.
Bug: 7230543
Change-Id: I763a88f64a2f9ff75eb139cfbaf9a1a9746c5577
This adds a line to the "dumpsys SurfaceFlinger" output that shows
build-time configuration values.
Example:
Build configuration: [sf HAS_CONTEXT_PRIORITY] [libui] \
[libgui USE_FENCE_SYNC]
Bug 7206633
Change-Id: Ibe1856b459d34a4be6ee83a4ebfd2807e6cc68a0
- Allow caller to set the observer and cookie.
- Add more notifications that the HDCPModule can send to its Observer.
Change-Id: I8bf9cc02a029cd38bbd25d9f0a634452173f4d26
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
This change makes updateTexImage default to performing the necessary
synchronization and adds an argument for SurfaceFlinger to disable that
synchronization so that it can be performed lazily.
Change-Id: I7c20923cc786634126fbf7021c9d2541aa77be5d
Bug: 6991805
The Surface createDisplay() call takes a display name for debugging.
This change carries it through SurfaceFlinger and displays it in
the "dumpsys SurfaceFlinger" output.
Bug 7058158
Change-Id: I79f3474a8656ff1beb7b478e0dbf2c5de666118a
The hints were being set a little too late, so the pre-rotation stuff
wasn't quite working.
Bug 7054997
Change-Id: Id8d5c626db7a76f768ba762a145b315878ee08e6
This change adds a compile-option to use eglWaitSyncANDROID to ensure that
texturing operations that access the current buffer of a SurfaceTexture do not
occur until the buffer is completely written. It also moves this
synchronization into a new SurfaceTexture method called doGLFenceWait and
changes SurfaceFlinger's Layer class to use that method rather than performing
its own wait on the fence.
Change-Id: I70afa88086ca7ff49a80e3cd03d423767db7cb88
The ComposerService object wasn't watching for SurfaceFlinger
restarts, which doesn't usually matter because the app framework
restarts when SurfaceFlinger dies. However, mediaserver continues
to run, which means its ComposerService object was trying to use
a dead handle, and playback of DRM movies was failing.
This adds a DeathRecipient listener and some logic to re-establish
the SurfaceFlinger connection.
Bug 6645813
Change-Id: I07581b881d3835601aa57d5358c8259d93bc4515
This change moves some common fence handling code into the base class for
BufferQueue consumer classes. It also makes the ConsumerBase class initialize
a buffer slot's fence with the acquire fence every time a buffer is acquired.
Change-Id: I0bd88bc269e919653b659bfb3ebfb04dd61692a0
We used to keep the bounds of the region as a
separate rectangle. Instead we now store it as the last
element of the Vector<> of Rects.
This has the benefit of being slightly more efficient when
copying regions and reduces the overhead of small regions,
but more importantly will allow us to export the underlaying
SharedBuffer (eventually).
Change-Id: I80790e4fb1a09a747a5616000cfef852ac4ce9e9
This change adds some infrastructure for testing the BufferQueue class. It
also includes a test that tests the new check in BufferQueue::acquireBuffer
that prevents the consumer from acquiring more than one buffer beyond the max
acquired buffer count that was set.
Change-Id: I38554ad3f9a53d2ddeba7ef0deee35ec2e2f9775
This change makes BufferQueue derive the min undequeued buffer count from a max
acquired buffer count that is set by the consumer. This value may be set at
any time that a producer is not connected to the BufferQueue rather than at
BufferQueue construction time.
Change-Id: Icf9f1d91ec612a079968ba0a4621deffe48f4e22
This change is a clean up of some of the handling of the maximum number of
buffers that are allowed at once. It mostly renames a few member variables and
methods, but it includes a couple small refactorings.
Change-Id: I9959310f563d09583548d4291e1050a7bbc7d87d
DisplayDevices are now keyed of the wp<IBinder> the client uses.
DisplayID has now become DisplayType which is just used to identify
physical displays (as opposed to virtual displays such as wifi displays).
Change-Id: I0c5968f2c902dcd699a7e0afacf833ff070c12ea
This is a compatibility shim for one product whose drivers
are depending on SurfaceComposerClient::getDisplayInfo(
int, DisplayInfo*) when it really shouldn't.
Revert this patch when the problem has been resolved.
Bug: 7065398
Change-Id: I6542691b81fd1b1e1d79500a62e82d40a3d51db7
Use only display tokens in the API to refer to new displays.
Don't require the caller to specify the display when creating
a surface (since in general a surface could be shown on
any display).
This is intended to be a minimum change just to update the API.
Note that SurfaceFlinger still uses DisplayID in a few places
internally that might cause some features not to work properly
when there are multiple displays (LayerScreenshot, for example).
Change-Id: I3d91eec2da406eefd97bcd53655d403ad865a7e6
Fixed the order of the statements in ANDROID_SINGLETON_STATIC_INSTANCE
macro so that the templated static member variable initialization
comes before the instantiation of the Singleton class. This
fixes the clang compile error.
Change-Id: Ic47d17e152b657f2dff3191ccc3770753fdf002b
Author: Tareq A. Siraj <tareq.a.siraj@intel.com>
Reviewed-by: Edwin Vane <edwin.vane@intel.com>
This change makes SurfaceTexture inherit from ConsumerBase. It removes all of
the functionality from SurfaceTexture that is now provided by the base class.
This includes fixes for two bugs that were found after checking this change in
the first time and then reverting it.
Change-Id: Ie2d9f4f27cfef26fdac341de3152e842b01a58d2
BufferItemConsumer allows for acquiring BufferQueue's BufferItems,
which contain all the data and metadata the BufferQueue has for a
given graphics buffer.
This consumer is useful when direct access to the native buffer_handles
is needed by the client.
Also includes a minor cleanup of CpuConsumer's use of 'virtual'.
Bug: 6243944
Change-Id: If7dc4192b15ac499555f1eda42a85140f2434795
some binaries are using these private APIs and broke
(as they should!) with this change. Temporarily restore the
virtuals to work around this.
Bug: 6977550
Change-Id: I7c37f24b16e4d586b89205c493db5169cf87e024
This change fixes SurfaceTexture::freeBufferLocked so that it calls the base
class implementation.
Change-Id: I45d76fb2eb02c1fa6e4e917823ead83e2086bd15
This change makes SurfaceTexture inherit from ConsumerBase. It removes all of
the functionality from SurfaceTexture that is now provided by the base class.
Change-Id: I4a881df42810a14ee32d4ef7c8772a8f2510f4c7
this change introduces a new class LightFlattenable<> which is
a protocol to flatten simple objects that don't require
binders or file descriptors; the benefit of this protocol is that
it doesn't require the objects to have a virtual table and give us
a consitant way of doing this.
we also introduce an implementation of this protocol for
POD structures, LightFlattenablePod<>.
Parcel has been update to handle this protocol automatically.
Sensor, Rect, Point and Region now use this new protocol.
Change-Id: Icb3ce7fa1d785249eb666f39c2129f2fc143ea4a
- displays are represented by a binder on the client side
- c++ clients can now create and modify displays
Change-Id: I203ea5b4beae0819d742ec5171c27568f4e8354b
- make errors that will always cause a memory corruption always fatal
(for eg: KeyedVector<>::editValue{For|At}() failure)
- make other errors fatal in debug mode, those that can be caught by
the caller.
- fix typos
Change-Id: I65cc7d81035c37ce2906fc4500c50e5d5b5c49eb
This change refactors the FramebufferSurface class to inherit from the new
ConsumerBase class.
Bug: 6620200
Change-Id: I46ec942ddb019658e3c5e79465548b171b2261f2
this attribute can be set through a regular transaction using
SurfaceComposerClient (just like any other attribute, eg: position or size)
Change-Id: I701a47c677ea6442ca713728a93335328cd2b172
no change of functionality -- the old behavior is implemented
on top of this new protocol.
this new protocol will allow, eventually, to pass informations
about displays and layer stacks.
Change-Id: Ic6c2295e61ec8ecbc8ce01ab7664e35d928202fc
- remove dependency on cached state in validateVisibility
- get rid of mVertices and mTransformedBounds
- get rid of validateVisibility
- get rid of unlockPageFlip
- handleTransaction now returns a dirty region
- computevisibileregion now uses window-manager space
both API and implementation will change, this is just a prototype
intended to show feasability.
SurfaceFlinger is passed an ISurfaceTexture through a new
callback, it is in turn used to create an EGLSurface which
surfaceflinger will draw into in addition to the main screen.
Change-Id: Id0bbb0b854bb7bae44d57246a90b65d4567f9a21
ISurfaceTexture::dequeueBuffer now returns the buffer's fence for the
client to wait on. For BufferQueue, this means passing it through
Binder so it can be returned to the SurfaceTextureClient. Now
SurfaceTextureClient is responsible for waiting on the fence in
dequeueBuffer instead of BufferQueue: one step closer to the goal.
Change-Id: I677ae758bcd23acee2d784b8cec11b32cccc196d
After a HWC set, each SurfaceFlinger Layer retrieves the release fence
HWC returned and gives it to the layer's SurfaceTexture. The
SurfaceTexture accumulates the fences into a merged fence until the
next updateTexImage, then passes the merged fence to the BufferQueue
in releaseBuffer.
In a follow-on change, BufferQueue will return the fence along with
the buffer slot in dequeueBuffer. For now, dequeueBuffer waits for the
fence to signal before returning.
The releaseFence default value for BufferQueue::releaseBuffer() is
temporary to avoid transient build breaks with a multi-project
checkin. It'll disappear in the next change.
Change-Id: Iaa9a0d5775235585d9cbf453d3a64623d08013d9
This change updates the uses of ANativeWindow to use the new ANW functions that
accept and return Sync HAL fence file descriptors.
Change-Id: I3ca648b6ac33f7360e86754f924aa072f95242f6
SF now has its own implementation of ANW for the
framebuffer and it uses BufferQueue. FramebufferNativeWindow
is now only used by stand-alone apps.
Change-Id: Iddeb24087df62bd92b0f78e391dda9b97ddc859c
SurfaceFlinger will no longer directly synchronize with early suspend.
Instead, PowerManagerService will synchronize with SurfaceFlinger to
ensure that a black frame has been drawn on the display, and then
trigger all early suspend handlers.
Change-Id: I07acdd628440d23fdb69db94319ec5d65d3f4919
SurfaceFlinger is using this new feature to reject buffers that
don't have the right size.
Bug: 6498869
Change-Id: I8a7250a47db6c082a357b703feb3b9d0fc8d3443
CameraParameters was moved over to frameworks/native before
frameworks/av was created, since it is referenced by HAL
implementations. Move it to frameworks/av to keep it together with its
implementation.
Bug: 6500863
Change-Id: Iffd890c861a334930da71a2722553572bad1cb54
Aimed for use cases where gralloc buffers need to be consumed by CPU
users, such as camera image data streams.
The CpuConsumer is a synchronous queue, which exposes raw pointers to
the underlying graphics buffers to applications. Multiple buffers may
be acquired at once, up to the limit set at time of construction.
Change-Id: If1d99f12471438e95a69696e40685948778055fd
Previous kernels have allowed opening the CPU frequency file regardless
whether the CPU is up or not. This fixes some log spam on one device
with dynamic hot plug CPU feature, which does not allow opening the CPU
frequency file if CPU is down.
Also, since the file descriptors are global and have long lives, add
the close-on-exec flag.
Change-Id: Ia14a2b9e20038dfb96a573920176a47a96bd3f5a
This change removes the setPostTransformCrop function from
SurfaceTextureClient. It also includes a small logging fix in BufferQueue.
Bug: 6299171
Change-Id: Ifd0ed05b95dad6085e7a8267fda4d69b76ea3bad
add getBounds(), getWidth(), getHeight(), width() and height()
are kept for backward compatibility.
Change-Id: I83837abf17dc2f8bded1beff73430e8c7d9bbdb3
This change adds a crop rectangle specified in window coordinates to the layer
state. The all window pixels outside this crop rectangle are treated as though
they were fully transparent. This change also adds the plumbing necessary for
WindowManager to set that crop.
Change-Id: I582bc445dc8c97d4c943d4db8d582a6ef5a66081
Every IBinder object can accept a new transaction to tell it that
it might want to reload system properties, and in the process
anyone can register a callback to be executed when this happens.
Use this to reload the trace property.
This is very much ONLY for debugging.
Change-Id: I55c67c46f8f3fa9073bef0dfaab4577ed1d47eb4
This change reduces the shrinking of the crop rectangle in some cases. It adds
a way to inform the SurfaceTexture that its texture will be used without
bilinear interpolation, and uses knowledge of the pixel format to avoid
shrinking unecessarily.
Change-Id: I72365f39f74ecb7fcc51b4cf42f2d0fa97727212
This change adds support for specifying a crop rectangle to a
SurfaceTextureClient that is in post-transformed coordinate space.
Change-Id: I247901de343e71b32850f7ae3bac62dfa612ad3d
Bug: 6299171
This change adds a method to Rect to transform a rectangle by a graphics HAL
transform.
Change-Id: Ic0d0988e731bdb5662faee41a5927b1242891658
Bug: 6299171
This change adds the plumbing to SurfaceTextureClient, BufferQueue, and
SurfaceTexture to get the active rectangle passed to the ANativeWindow to
the buffer consumer.
Change-Id: I35da0889b266327ebb079b6a7136fa3e2e8b00e6
indeed, connect and queueBuffer return the same data, so it's
easier to have them use the same protocol.
Change-Id: I4f9fa3be0a80c9ab0a7a4039b282ae843aab02e1
Remove C++ APIs androidSetThreadSchedulingGroup and
androidGetThreadSchedulingGroup, and the ANDROID_TGROUP_* constants.
Former callers of these should now use the C APIs set_sched_policy and
get_sched_policy, and the SP_* constants.
Note: debug.sys.noschedgroups is not supported by the C APIs,
this needs to be discussed.
Change-Id: I32bbfc539ef4090faf9ef0320380e8cca9eae07c
- it returned an empty rect when the region was empty, instead
of returning an empty list of rect.
- also fixed an infinite loop when boolean_operation was given
an empty list of rects
Change-Id: I62225c7dcd2832025bb8f12e6cb3762f2a7b36cb
SurfaceTexture will modify the crop rect so it matches
the desired output aspect ratio when the scaling
mode is NATIVE_WINDOW_SCALING_MODE_CROP. Added a test
for this new scaling mode.
Change-Id: I60f24dcbc294b65cd10a393d9e27d40f07d27bb6
Add a new API native_window_set_buffers_user_dimensions to allow native
applications to override the native window size for the default buffer size.
This has lower precedence than the existing
native_window_set_buffers_dimensions and allows the two to co-exist.
Change-Id: Ie73590e1c94ef0dadbce500bd0941dfabbcace3c
BufferQueue is now more flexible as it can be used
by SurfaceMediaSource in addition to SurfaceTexture.
Change-Id: I4222be8918d63372c44fcd412d9ad241c6a3eeb9
These keys are specific to Japanese hardware keyboard which can be
used by input method.
Patch ported from AOSP, with the addition of KANA.
Change-Id: I1474f0eb8971ed5d632822b1f9825c426f4817eb
BufferQueue's disconnect could race with updateTexImage
where invalid buffers could be released. Additionally
fixed similar bug with setBufferCount. Tests were added
to stress the disconnect mechanism.
Change-Id: I9afa4c64f3e025984e8a9e8d924852a71d044716
This change adds the detachFromContext and attachToContext methods to
SurfaceTexture. These methods allow the SurfaceTexture to switch from
one consumer GLES context to another. This change also includes a few
cleanups to the error return codes in updateTexImage.
Change-Id: I0df1eb599aa7b6f58f07431f242f8f09269559ed
collapse setCrop, setTransform and setScalingMode to queueBuffer()
this ends up simplifying things quite a bit and reducing the numnber
of IPC needed per frame.
Change-Id: I3a13c07603abe4e76b8251e6380b107fde22e6d9
Move services/powermanager into frameworks/native so audioflinger can
use it. Note that this is not the same as a PowerManagerService,
which is part of systemserver and handles turning the screen on and
off, etc. This is just a binder interface to allow taking wakelocks.
Change-Id: I6b6a8b41cdbad17e826fda45aab5f059f22fc64e
The DummyConsumer is a consumer that can connect to BufferQueue
that does nothing. It is required as BufferQueue checks
if a consumer is connected. Also fixes a bug where SurfaceTexture
was reusing old texture slots.
Bug: 6172739
Change-Id: I5e7a118dd4d07807ba4c763200242b5ee7d3412b
ZipUtils is needed by build/tools, move it from libandroidfw
(frameworks/base) to libutils (frameworks/native).
Change-Id: Ib8c41134ccdec6d6aa8d49860f8dddef49a24783
This is a copy of libcore's UniquePtr.h header which is used until we
get C++11 which has std::unique_ptr which is essentially the same.
Taken from libcore project at commit
3e6dd45baa0d7f9b4fa06f4ade76e088b59cc7bf
Change-Id: I7537b016f9eae33bfc4c57b24f86260909719ab8
This change adds a check to SurfaceTexture::updateTexImage to verify
that the current GL context is the same as the one that was used for
previous updateTexImage calls.
Change-Id: If02d2f787bcfdb528046dc9ddf6665f8a90e1bf4
This change adds a new callback for BufferQueue consumers to be notified
when the BufferQueue frees some or all of its buffers. This is needed
to retain SurfaceTexture behavior where all buffers would be freed when
the producer disconnects. This change also modifies the
SurfaceTextureGLToGLTest.EglDestroySurfaceUnrefsBuffers test to catch
when the buffers are not freed.
The implementation is a little complicated because it needs to avoid
circular sp<> references across what will be a binder interface (so wp<>
can't be used directly). It also needs to avoid the possibility of
locking the BufferQueue and consumer (e.g. SurfaceTexture) mutexes in
the wrong order.
This change also includes a few additional fixes and test cleanups.
Change-Id: I27b77d0af15cb4b135f4b63573f634f5f0da2182
Many of our basic data structures are trivially movable using
memcpy() even if they are not trivially constructable, destructable
or copyable. It's worth taking advantage of this *ahem* trait.
Adding trivial_move_trait to String16 reduces appt running
time on frameworks/base/core/res by 40%!
Change-Id: I630a1a027e2d0ded96856e4ca042ea82906289fe
CameraParameters.h is indirectly required to implement the Camera
HAL. Move it to frameworks/native.
Bug: 6171735
Change-Id: If4ccb273ea7ca79f54402ebc00febf1c3e59799f
This is used by the Java trace wrappers to avoid JNI overhead
when trace tags are disabled.
Also added a new tag for the input subsystem and view hierarchy.
Change-Id: Ia04a507e42a37b1d3bbb19859e6c07a92f4fe9aa
MemoryHeapPmem is not used any longer. PMEM is not a supported
type of memory by the system anymore. a particular device might
use PMEM and need something like MemoryHeapPmem, in this case this
should be implemented in device specific code (HAL).
This will most likely break older no longer supported targets.
Change-Id: I434e4291219950018de8b793b0403bb2d92dd5cc
Refactored SurfaceTexture and BufferQueue such that share
no protected members. Created an consumer facing interface
for BufferQueue in preparation of connecting SurfaceTexture
and BufferQueue through a binder.
Change-Id: I938e63e085128148c58d0e26c7213b30145c109f
AndroidDefs.h - C/C++ enums and types
Mutex.h - Mutex class declaration
Condition.h - Condition class declaration
RWLock.h - RWLock class declaration
Thread.h - Thread class declaration
AndroidThreads.h - low-level thread creation functions
threads.h - includes all the above for backward source compatibility
Change-Id: Ia2f80c175333b59a41d1720985810bb2346e94cb
Note: implementations are still in Threads.cpp
re-add support for pixelformats L_8, LA_88 and RGB_332 in libui
for backward compatibility.
This may or may not fix 6058926
Bug: 6049685
Change-Id: Ic1b8b4cc994522f7fe664da64c0ef76b98bc6d53
Refactored SurfaceTexture and BufferQueue such that share
no protected members. Created an consumer facing interface
for BufferQueue in preparation of connecting SurfaceTexture
and BufferQueue through a binder.
Change-Id: Iff55e740e36a7f70c9f7a17ee7a5af38e3d21f0f
The update compiler in Xcode 4.3 (and 4.4) requires lookups into dependant
bases of class templates to be qualified. This checkin fixes the issues
raised by the compiler by implementing the this-> recommendation from
the llvm page at http://clang.llvm.org/compatibility.html#dep_lookup_bases
Signed-off-by: Al Sutton <al@funkyandroid.com>
Instead of sending finished signals immediately when appending to
a batch, record the chain of sequence numbers that were part of
the batch and then send finished signals all at once when done.
This change helps the dispatcher keep track of the true state
of the application and can improve ANR detection slightly.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I463c2221e2aa8fdf1c3d670c18e39e59ab69b0db
To support this feature, the input dispatcher now allows input
events to be acknowledged out-of-order. As a result, the
consumer can choose to defer handling an input event from one
device (because it is building a big batch) while continuing
to handle input events from other devices.
The InputEventReceiver now sends a notification when a batch
is pending. The ViewRoot handles this notification by scheduling
a draw on the next sync. When the draw happens, the InputEventReceiver
is instructed to consume all pending batched input events, the
input event queue is fully processed (as much as possible),
and then the ViewRoot performs traversals as usual.
With these changes in place, the input dispatch latency is
consistently less than one frame as long as the application itself
isn't stalled. Input events are delivered to the application
as soon as possible and are handled as soon as possible. In practice,
it is no longer possible for an application to build up a huge
backlog of touch events.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I42c01117eca78f12d66d49a736c1c122346ccd1d
Since we will not longer be modifying events in place, we don't need
to use an ashmem region for input. Simplified the code to instead
use a socket of type SOCK_SEQPACKET.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I05909075ed8b61b93900913e44c6db84857340d8
Services now must explicitly opt in to being accessed by isolated
processes. Currently only the activity manager and surface flinger
allow this. Activity manager is needed so that we can actually
bring up the process; SurfaceFlinger is needed to be able to get the
display information for creating the Configuration. The SurfaceFlinger
should be safe because the app doesn't have access to the window
manager so can't actually get a surface to do anything with.
The activity manager now protects most of its entry points against
isolated processes.
Change-Id: I0dad8cb2c873575c4c7659c3c2a7eda8e98f46b0
This adds basic support for clip regions. It is currently disabled at compile
time. Enabling clip regions will require setting up a stencil buffer.
Change-Id: I638616a972276e38737f8ac0633692c3845eaa74
Switching activity stacks
Cache ContentProvider per user
Long-press power to switch users (on phone)
Added ServiceMap for separating services by user
Launch PendingIntents on the correct user's uid
Fix task switching from Recents list
AppWidgetService is mostly working.
Commands added to pm and am to allow creating and switching profiles.
Change-Id: I15810e8cfbe50a04bd3323a7ef5a8ff4230870ed
with this changes, SF transactions are handled as soon as possible
but do not trigger updates. the update is delayed until the next
vsync.
this allows us to work much better without requiring triple-buffering.
Change-Id: I1fa10794d0cf742129f0877698b7b1e1f2ec7401
vsync events were sometimes delivered to connected
client who didn't request them. this happened if
another client requested the delivery and that client
was first in the client list.
also fix the vsync test which didn't request any events as
well as DisplayEventReveiver documentation which was misleading
about the necessity to request vsync events.
Change-Id: Ie990fda3f337f8f0042745c4b2cde67936c45686
In our current environment with very many translations, this can
save a lot of RAM -- for example over 200K in Gmail just by sorting
the strings in the Gmail .apk (not the framework).
Also add a new aapt command to print the contents of the resource
table string pool.
Change-Id: I1da037b3e2c377b890833ff57ab158965314ac48
This is needed when the parent or any other thread besides the child
needs access to the child's kernel tid.
Change-Id: Ib148505913eb78314cfd76657c30d7b20663dffd
The idea is that this is a device which is more-or-less headless. It
might have some limited interaction capabilities, but it's not something
that you want to rely on having.
Change-Id: Ib92f53a120bf83de781728011721a4859def7d9f
- add the ability to set the vsync delivery rate, when the rate is
set to N>1 (ie: receive every N vsync), SF process' is woken up for
all of vsync, but clients only see the every N events.
- add the concept of one-shot vsync events, with a call-back
to request the next one. currently the call-back is a binder IPC.
Change-Id: I09f71df0b0ba0d88ed997645e2e2497d553c9a1b
This change adds a compile-time option for SurfaceTexture to use the
EGL_KHR_fence_sync extension to synchronize access to Gralloc buffers.
Bug: 5122031
Change-Id: I7e973a358631fff5308acf377581b811911fe790
use gui/DisplayEvent to receive the events. Events are
dispatched through a unix pipe, so the API is compatible
with utils/Looper. see gui/DisplayEvent.h for more info.
Bug: 1475048
Change-Id: Ia720f64d1b950328b47b22c6a86042e481d35f09
Revert "Add support for sending VSYNC events to the framework"
This reverts commit f3918c5bd4bc9f02f74da42995564150ca2dd382.
Change-Id: I998e3e1aa3fa310829ae973b64fe11b01f6f468f
Improved quick launch bookmarks to support category-based shortcuts
instead of hardcoding package and class names for all apps.
Added a set of Intent categories for typical applications on the
platform.
Added support for some of the HID application launch usages to
reduce reliance on quick launch for special purpose keys. Some
keyboard vendors have hardcoded launch keys that synthesize
"Search + X" type key combos. The goal is to encourage them
to stop doing this by implementing more of HID.
Bug: 5674723
Change-Id: I79f1147c65a208efc3f67228c9f0fa5cd050c593
use gui/DisplayEvent to receive the events. Events are
dispatched through a unix pipe, so the API is compatible
with utils/Looper. see gui/DisplayEvent.h for more info.
Bug: 1475048
Change-Id: If4126023fc9c067e56087ec7d16a8fd542ce1794
The basic hashtable is intended to be used to support a variety
of different datastructures such as map, set, multimap,
multiset, linkedmap, generationcache, etc.
Consequently its interface is fairly primitive.
The basic hashtable supports copy-on-write style functionality
using SharedBuffer.
The change introduces a simple generic function in TypeHelpers for
specifying hash functions. The idea is to add template
specializations of hash_type<T> next to the relevant data structures
such as String8, String16, sp<T>, etc.
Change-Id: I2c479229e9d4527b4fbfe3b8b04776a2fd32c973
* commit 'c25972950c2ea62fb085524dbe737c2bf0f08f4a':
SurfaceTexture: fix a couple tests
EGL: default to swap interval 1
SurfaceTexture: clean up some tests
This change makes SurfaceMediaSource add the VIDEO_ENC usage bit when
allocating its GraphicBuffers rather than the HW_TEXTURE bit.
Change-Id: Ie20e225c894fdbc31cad6bb82b3b64c7e98074eb
This change explicitly sets swap interval 1 on the window when an
EGLSurface is created to render to it.
Change-Id: I91eb29dbee3ae4a55076b921f084d503fbe94e03
the working theory here is that a Surface object has become non-promotable
because it lost its last reference; later Surface::readFromParcel is called
the previous surface is found in the cache, but can't be promoted. this causes
a new Surface object to be created which will promptly try to connect to the
CPU_API -- this in turn will fail because the previous (now dead) surface is
still connected.
To fix this, we make sure to disconnect from the SurfaceTexture when
Surface[TextureClient] is destroyed.
Change-Id: I422234868a05d7b7d283e9d5a85f7ab79e65d8a9
Stop using system properties to publish information about
the key character map path. Instead, we can retrieve it
on demand by asking the window manager.
It was possible to exhaust the supply of system properties
when repeatedly adding and removing input devices.
Bug: 5532806
Change-Id: Idd361a24ad7db2edc185c8546db7fb05f9c28669
Surface Texture dequeue logic is modified to return the oldest of the
free buffers to Client on dequeue call.
Currently dequeue method is returning the first buffer index which is free.
The parsing is done in ascending order of the buffer slot indices.
This leads to returning the buffer which has been just queued to composer,
and hence display, and this defeats the purpose of having minimum dequeue count
as 2 in asynchrnouse mode.
This is fixed by checking all the free slots and returning the oldest buffer.
Change-Id: Ibbac10593c3994c278c601af0480b171635ecdd4
Signed-off-by: Sunita Nadampalli <sunitan@ti.com>
Use const references to keys and values where appropriate to avoid
copying them unnecessarily.
Deleted some dead code.
Simplified a few pieces that were doing unnecessary redundant work.
Change-Id: Ib2145b7094a40db2d679e05dafe050fe1e87b846
Was mistakenly assuming that Parcel::writeFileDescriptor took
ownership of the fd that was passed in. It does not!
Added some comments and a default parameter to allow the caller
to specify whether it wishes the Parcel to take ownership.
Bug: 5563374
Change-Id: I5a12f51d582bf246ce90133cce7690bb9bca93f6
This change adds serialization and deserialization functionality to
BlobCache, conforming to the Flattenable interface.
Change-Id: Ibc99cb1c3d015f363d57d0713eabccec07ff975e
This change removes the mutex from the BlobCache class. The caller must
be responsible for thread synchronization in order to properly implement
the Flattenable interface, which is coming soon. Otherwise would be the
potential for the cache contents to change between the call to the
getFlattenedSize and flatten methods. Because the caller must do this
synchronization anyway there's no reason to also some synchronization
inside BlobCache.
Change-Id: Ie1f4f6f82b78744f46a41ce863cac0cad276a20e
A LayerScreenshot is a special type of layer that contains a screenshot of
the screen acquired when its created. It works just like LayerDim.
Make sure to call compositionComplete() after rendering into a FBO.
Bug: 5446982, 5467587, 5466259
Change-Id: I5d8a1b4c327f9973d950cd4f4c0bca7f62825cd4
if system process ever restarted, processes using a SensorManager
would loose the ability to use it, resulting to a crash.
we now listen for sensor service death and reconnected if necessary.
Bug: 5445240
Change-Id: Ia47f8b26cdcecb729fa22bf11d55e10fcaef8cfc
This change removes the dead code from SurfaceFlinger that resulted from
disabling support for freezing the display.
Change-Id: I4e5ff00c94b4c7a79af2f65c9850c135210068ed
This change enables a layer or orientation update transaction sent to
SurfaceFlinger to explicitly request a synchronous transaction.
Change-Id: I97cbba610c13679849f66114b216fa6dbf12f2a9
A LayerScreenshot is a special type of layer that contains a screenshot of
the screen acquired when its created. It works just like LayerDim.
Bug: 5446982
Change-Id: I7814aff2380e7e146937f2b641907be2a30c76cc
There is no difference and has never really been a difference
between local-only and remotable CursorWindows. By removing the
distinction officially in the API, we will make it easier to
implement CrossProcessCursor correctly. CrossProcessCursor
is problematic currently because it's not clear whether a call
to getWindow() will return a local-only window or a remotable window.
As a result, the bulk cursor adaptor has special case handling
for AbstractWindowedCursors vs. ordinary CrossProcessCursors
so that it can set a remotable window before the cursor fills it.
All these problems go away if we just forget about local-only
windows being special in any way.
Change-Id: Ie59f517968e33d0ecb239c3c4f60206495e8f376
This change removes unnessary symbols. All symbols are hidden by
default, public APIs with exported symbols are explicitly marked
with ANDROID_API.
Change-Id: I692fde432a86c12108de1cfd1f6504919a7d5f3f
This change merges the ISurfaceComposer::setOrientation functionality
into ISurfaceComposer::setTransactionState. It enables the window
manager to atomically update both the display orientation and the
position and size of the windows in a single transaction with
SurfaceFlinger.
Bug: 5439574
Change-Id: I18a8ccc564d7d760ef8afb2d015ccdb7a7963900
Bug: 5332296
The memory dealer introduces additional delays for reclaiming
the memory owned by CursorWindows because the Binder object must
be finalized. Using ashmem instead gives CursorWindow more
direct control over the lifetime of the shared memory region.
The provider now allocates the CursorWindows and returns them
to clients with a read-only protection bit set on the ashmem
region.
Improved the encapsulation of CursorWindow. Callers shouldn't
need to care about details like how string fields are allocated.
Removed the compile-time configuration of string and numeric
storage modes to remove some dead weight.
Change-Id: I07c2bc2a9c573d7e435dcaecd269d25ea9807acd
Bug: 5332296
The code is functionally equivalent, but a little more efficient
and much easier to maintain.
Change-Id: I90670a13799df05831843a5137ab234929281b7c
This change adds a hack to allow Android Browser to use a SurfaceTexture
to stream RGBA images to a GL_TEXTURE_2D texture object.
Change-Id: Idb90064d5d4b920959ef3be7451362ac5012460e
This change adds support for setting a string that can be used to
identify a SurfaceTexture object in log messages.
Change-Id: Ib4ee085f36c8830dc964c05ef1654f5a55dfcd60
