AudioFlinger: verify that mCblk is not null before using it in Track and RecordTrack contructors.
IAudioFlinger: check result of remote transaction before reading IAudioTrack and IAudioRecord.
IAudioTrack and IAudioRecord: check result of remote transaction before reading IMemory.
Add a parameter to ToneGenerator.startTone() allowing the caller to specify the tone duration. This is used by the phone application to have a precise control on the DTMF tone duration which was not possible with the use of delayed messaged.
Also modified AudioFlinger output threads so that 0s are written to the audio output stream when no more tracks are ready to mix instead of just sleeping. This avoids an issue where the end of a previous DTMF tone could stay in audio hardware buffers and be played just before the beginning of the next DTMF tone.
Do not ramp volume if the first frame of a track is processed after the track was stopped.
In the case of very short sounds, the track stop request can be received by AudioFlinger just after the start request before the first frame is mixed by AudioMixer. In this case, the track is already in stopped state and initial volume is applied with a ramp for the first frame processed which should not be the case: initial volume change is always applied immediatelly.
In AudioFlinger::MixerThread::putTracks(), change the mFillingUpStatus flag to FS_FILLING for active tracks so that mute request is executed without ramping volume down when the track is moved from A2DP to hardware output.
Also modified AudioFlinger::setStreamOutput() so that the notification of the change is sent only once to AudioSystem.
This is because the AudioFlinger duplicating thread is closed while the output tracks are still active. This cause the output tracks objects to be destroyed at a time where they can be in use by the destination output mixer.
The fix consists in adding the OutputTrack to the track list (mTracks) of its destination thread so that a strong reference is help during the mixer processed and the track is detroyed only when safe by destination thread.
Also added detection of problems when creating the output track (e.g. no more tracks in mixer). In this case the output track is not added to output track list of duplicating thread.
When changing the audio output stream sampling rate with setParameters() make sure that all tracks have a sampling rate less or equal to 2 times the new output sampling rate.
The BT headset detection now makes the difference between car kits and headsets, which can be used by audio policy manager.
The headset connection is also detected earlier, that is when the headset is connected and not when the SCO socket is connected as it was the case before. This allows the audio policy manager to suspend A2DP output while ringing if a SCO headset is connected.
There was no garanty that the corresponding thread destructor had been already called when exiting the closeOutput() or closeInput() functions.
This contructor could be called by the thread after the exit condition is signalled. By way of consequence, closeOutputStream() could be called after
we exited closeOutput() function.
To solve the problem, the call to closeOutputStream() or closeInputStream() is moved to closeOutput() or closeInput().
The function checkForNewParameters_l() is called with the ThreadBase mutex mLock locked. In the case where the parameter change implies
an audio parameter modification (e.g. sampling rate) the function sendConfigEvent() is called which tries to lock mLock creating a deadlock.
The fix consists in creating a function equivalent to sendConfigEvent() that must be called with mLock locked and does not lock mLock.
Also added the possibility to have more than one set parameter request pending.
Use integers instead of void* as input/output handles at IAudioFlinger and IAudioPolicyService interfaces.
AudioFlinger maintains an always increasing count of opened inputs or outputs as unique ID.
Initial commit for review.
Integrated comments after patch set 1 review.
Fixed lockup in AudioFlinger::ThreadBase::exit()
Fixed lockup when playing tone with AudioPlocyService startTone()
Patch supplied on advice of partner. This causes us to send suspend_sink to
Bluez via socket interface, so we enter suspend on the A2DP link faster.
This is especially important when switching to SCO so that we come closer to
whitepaper recommendations to suspend A2DP before setting up SCO.
We have another patch set to add DBUS A2DP suspend and resume calls to Bluez
that will do a better job of following whitepaper recommendations for
A2DP -> SCO -> A2DP, but this small patch is still an improvement.
Merge commit '88e209dcf8c2ebddda5c272f46d1bd5478bc639c'
* commit '88e209dcf8c2ebddda5c272f46d1bd5478bc639c':
Fix issue 1743700: AudioTrack: setPlaybackRate can not set the playback rate to twice of the ouputSR
Store sample rate on 32 bits instead of 16 bits in audio_track_cblk_t.
Removed sampleRate() methods from AudioTrack and AudioRecord: replaced by getSampleRate().
AudioTrack::setSampleRate() no returns a status.
Merge commit '2bbb80e183c6492689f8b10b2d0f5dfe9872a6ac'
* commit '2bbb80e183c6492689f8b10b2d0f5dfe9872a6ac':
Less logging in some places. More in others.
Merge commit 'd9cc7659fa9b8544e2a3ca7b7040fbd79afdf7ea'
* commit 'd9cc7659fa9b8544e2a3ca7b7040fbd79afdf7ea':
Fix issue 1883666: Audio coming from the music player stopped suddenly
The problem comes from the code handling the automatic change of audio routing to speaker when notifications are played. The music is also muted while the sound is forced to speaker.
To avoid truncating the end of the notification, a delay is inserted between the end of the notification and the restoration of the audio routing. If a new notification starts during this delay, the current music mute state read and saved before muting music corresponds to the forced mute due to previous notification. When the new notification ends, the mute state restored is muted and music stream stays muted for ever.
The fix consists in reading and saving music mute state only if the audio routing has been restored (check that mForcedRoute is back to 0).
This change is the first part of a fix for issue 1846343, :
- Added new enum values for input sources in AudioRecord and MediaRecorder for voice uplink, downlink and uplink+downlink sources.
- renamed streamType to inputSource in all native functions handling audio record.
A second change is required in opencore author driver and android audio input to completely fix the issue.
Merge commit 'a59aba8cd88b8f98fa4de2a903899bc6ac9f73e8'
* commit 'a59aba8cd88b8f98fa4de2a903899bc6ac9f73e8':
Update more references to openInputStream in support classes.
Modify AudioFlinger to use updated openInputStream factory method.
AudioTrack, AudioRecord:
- remove useless mAudioFlinger member of AudioTrack and AudioRecord.
- signal cblk.cv condition in stop() method to speed up stop completion.
- extend wait condition timeout in obtainBuffer() when waitCount is -1 to avoid waking up callback thread unnecessarily
AudioFlinger:
- remove some warnings in AudioFlinger.cpp.
- remove function AudioFlinger::MixerThread::removetrack_l() as its content is never executed.
- remove useless call to setMasterVolume in AudioFlinger::handleForcedSpeakerRoute().
- Offset VOICE_CALL stream volume to reflect actual volume that is never 0 in hardware (this fix has been made in the open source): 0.01 + v * 0.99.
AudioSystem.java:
- correct typo in comment
IAudioflinger, IAudioFlingerClient:
- make AudioFlinger binder interfaces used for callbacks ONEWAY.
AudioHardwareInterface:
- correct routeStrings[] table in AudioHardwareInteface.cpp
AudioFlinger::MixerThread::dumpTracks() was reading mTracks[] vector instead of mActiveTracks[] when dumping active tracks.
Original author: elaurent
Merged from: //branches/cupcake/...
Original author: android-build
Merged from: //branches/donutburger/...
Automated import of CL 143785
AudioFlinger::MixerThread::dumpTracks() was reading mTracks[] vector instead of mActiveTracks[] when dumping active tracks.
Original author: elaurent
Merged from: //branches/cupcake/...
Automated import of CL 143775
Current implementation of Camera service plays the camera shutter sound over the ALARM stream so that it cannot be muted by silent mode in order to comply to some country specific requirement. A recent change made it possible for the user to mute the ALARM stream thus making this stream not suitable any more for the camera shutter sound.
The fix consists in creating a new stream type only accessible by native code and that cannot be muted and use it to play camera sounds.
Original author: elaurent
Merged from: //branches/cupcake/...
Original author: android-build
Merged from: //branches/donutburger/...
Automated import of CL 143327
Current implementation of Camera service plays the camera shutter sound over the ALARM stream so that it cannot be muted by silent mode in order to comply to some country specific requirement. A recent change made it possible for the user to mute the ALARM stream thus making this stream not suitable any more for the camera shutter sound.
The fix consists in creating a new stream type only accessible by native code and that cannot be muted and use it to play camera sounds.
Original author: elaurent
Merged from: //branches/cupcake/...
Automated import of CL 143177
