This change adds an entire field to note whether the timestamp was
auto-generated by Surface or supplied by the application.
The value is used when deciding whether or not to drop frames based
on buffer presentation timestamps. If a desired presentation time
was set explicitly, BufferQueue will use that value to decide if a
frame should be dropped. If the timestamp was generated by Surface
at the time the buffer was queued, the timestamp is ignored.
Bug 10151804
Change-Id: Ibd571a7578351063b813cbdad2ddbeed70655ba5
- Return NOT_ENOUGH_DATA instead of INVALID_OPERATION when too many
buffers have already been locked.
- INVALID_OPERATION is nominally used when something irrecoverable happens,
but in this case the client just needs to call unlockBuffer to go back into a
good state.
Bug: 10333400
Change-Id: I3a034d77de85741429f832a90eedd670afa1dc94
this means they only have access to the consumer end of
the interface. we had a lot of code that assumed consumers
where holding a BufferQueue (i.e.: both ends), so most of
this change is untangling in fix that
Bug: 9265647
Change-Id: Ic2e2596ee14c7535f51bf26d9a897a0fc036d22c
Disable dropping of frames based on timestamp. Resume auto-
generating timestamps in Surface.
Bug 10151804
Change-Id: I15de26158e1d7ef22a5b150e685a126dc48ae2b4
While currently untested, this should allow to move the
BuffereQueue in the consumer process and have everything
work as usual.
Bug: 9265647
Change-Id: I9ca8f099f7c65b9a27b7e7a3643b46d1b58eacfc
If there are two or more buffers pending that are ready for
immediate presentation, drop all but the last one.
Any code that didn't explicitly specify timestamps for buffers
was using the default value (auto-generated "now"). As a result,
surfaceflinger would drop frames whenever more than one buffer
was queued. We now use zero as the auto-generated timestamp,
and we don't set the timestamp in eglBeginFrame().
Change-Id: I187f42d33de227cd3411ff0dcd3b9ce1961457eb
Fallout from the Flattenable change, update all its uses.
Additionnaly, fix/tighten size checks when (un)flatten()ing
things.
Removed the assumption by some flattenables (e.g.: Fence)
that the size passed to them would be exact (it can
and will be larger in some cases)
The code in Parcel is a bit complicated so that we don't
have to expose the full implementation (and also to
keep the code smallish).
Change-Id: I0bf1c8aca2a3128491b4f45510bc46667e566dde
BufferQueue::dequeueBuffer() could incorrectly return
WOULD_BLOCK while in "cannot block" mode if it happened
while a consumer acquired the last allowed buffer
before releasing the old one (which is a valid thing
to do).
Change-Id: I318e5408871ba85e068ea9ef4dc9b578f1bb1043
we can now queue/dequeue a buffer in asynchrnous mode by using the
async parameter to these calls. async mode is only specified
with those calls (it is not modal anymore).
as a consequence it can only be specified when the buffer count
is not overidden, as error is returned otherwise.
Change-Id: Ic63f4f96f671cb9d65c4cecbcc192615e09a8b6b
we tag queued buffers with the "bufferqueue cannot block" flag
and use that bit to discard a buffer in the queue by new ones
comming in. this allows us to remove the buffer queue drain in
disconnect while maintaining the right behaviour if it gets
connected again (since each buffer remembers how it was enqueued).
Change-Id: I1e703d363a687b70b19ba49cef32213116e8bd3f
this is the first step of a series of improvements to
BufferQueue. A few things happen in this change:
- setSynchronousMode() goes away as well as the SynchronousModeAllowed flag
- BufferQueue now defaults to (what used to be) synchronous mode
- a new "controlled by app" flag is passed when creating consumers and producers
those flags are used to put the BufferQueue in a mode where it
will never block if both flags are set. This is achieved by:
- returning an error from dequeueBuffer() if it would block
- making sure a buffer is always available by replacing
the previous buffer with the new one in queueBuffer()
(note: this is similar to what asynchrnous mode used to be)
Note: in this change EGL's swap-interval 0 is broken; this will be
fixed in another change.
Change-Id: I691f9507d6e2e158287e3039f2a79a4d4434211d
When acquiring a buffer, SurfaceFlinger now computes the expected
presentation time and passes it to the BufferQueue acquireBuffer()
method. If it's not yet time to display the buffer, acquireBuffer()
returns PRESENT_LATER instead of a buffer.
The current implementation of the expected-present-time computation
uses approximations and guesswork.
Bug 7900302
Change-Id: If9345611c5983a11a811935aaf27d6388a5036f1
Now that we are having separate buffer-instances for the buffer-
queue, we can free all buffers; we don't have to keep the head
alive.
Change-Id: I023e9161a2501d99333f8868ce438afa914ec50f
Signed-off-by: Lajos Molnar <lajos@google.com>
Related-to-bug: 7093648
Instead of representing the buffer-queue as a vector of buffer
indices, represent them as a vector of BufferItems (copies).
This allows modifying the buffer slots independent of the queued
buffers.
As part of this change, BufferSlot properties that are only
been relevant in the buffer-queue have been removed.
Also, invalid scalingMode in queueBuffer now returns an error.
ConsumerBase has also changed to allow reuse of the same
buffer slots by different buffers.
Change-Id: If2a698fa142b67c69ad41b8eaca6e127eb3ef75b
Signed-off-by: Lajos Molnar <lajos@google.com>
Related-to-bug: 7093648
- timeout is now 3 seconds instead of 1
- simplifies the API a bit
- allows us to change/tweak this timeout globaly
Bug: 8988871
Change-Id: I8d3c6ec43a372f602fb3f29856710339f86c0ec9
- Add fields to CpuConsumer::LockedBuffer for new information
- New lock methods for GraphicBuffer and GraphicBufferMapper for
the format
Bug: 8734880
Change-Id: If31f82c62d64b6942cf4cc6e5715585c03273f12
This change fixes how the MultiTextureConsumerTest.EGLImageTargetWorks checks
for pixels. It removes the call to eglSwapBuffers so that the test does not
rely on EGL swap-preserve behavior, and it makes the test use checkPixel()
rather than doing glReadPixels itself.
Bug: 8349336
Change-Id: I0f446a0083eebd07af6fd208762878b4e367725a
mDefaultWidth, mDefaultHeight and mCurrentScallingMode are now
initialized to the same default value that BufferQueue uses.
Change-Id: I0d4da2022b06419d12745716d8ddbd48c8869953
This change increases the pixel difference tolerance of the
SurfaceTextureGLTest.TexturingFromCpuFilledYV12BufferNpot test from 2 to 3.
Bug: 8349135
Change-Id: I82e361a689335f49065cacd8a3fc145d67b125f1
This moves the call to ConsumerBase::abandon from the ConsumerBase dtor to
ConsumerBase::onLastStrongRef. The abandon call relies on virtual methods to
perform the clean-up, so calling it from the ConsumerBase dtor after the
derived classes dtors ran was skipping some of the clean-up. The
onLastStrongRef method should get called just before the most derived class's
dtor gets called.
Bug: 8349135
Change-Id: I836946826927cc1ed69c049049f525f92b17a269
We now detect at runtime which sync features to use, which
allows us to remove a lot of the compile-time configuration
options. There is still one option though, to disable
KHR_fence_sync on some devices (which are more efficient
without it).
- added a backdoor to get the vendor's EGL strings
the new logic is:
- use always ANDROID_native_fence_sync if available
- fallback to KHR_fence_sync if available and not disabled
by the compile-time option
- use KHR_wait_sync if available and either of the above is
enabled
Change-Id: I9c4b49d9ff1151faf902cc93bd53ea5f205aaabf
We're not using IMemoryHeap as a transport anymore,
instead we're providing a CpuConsumer and use the
IGraphicBufferProducer version of the screenshot API.
However, some GPU drivers don't support properly
a GPU to CPU path, to work around this, we use a
temporary BufferQueue on the server side for the
GL rendering, and we use glReadPixels into the
CpuConsumer (we're now using a CPU to CPU path
which is always supported).
Currently this "wrapping" is always performed,
but it can be bypassed on devices that support
the GPU to CPU path.
This also addresses a DoS attack vector on
SurfaceFlinger, where an application could
consume all of SF's filedescriptors by creating
a lot of screenshots in a row.
Bug: 8390553
Change-Id: I9e81514c2a7711b9bb393f74305be7d2abe08f1c
ISurface was only used to get the IGraphicBufferProducer from
a Layer. It's now replaced by a BBinder subclass / IBinder and
is only used as a handle to the surface, to both refer to it
and manage its life-time.
Also cleaned-up a bit the ISurfaceComposer interface and
"create layer" code path.
Change-Id: I68d0e02d57b862cffb31d5168c3bc10cea0906eb
When disconnecting from BufferQueue, we now drain the queue
except the head (which means in the screenshot case we won't
have to block, but we might not have a buffer to show, this
will appear as an error in the log).
Bug: 8362363
Change-Id: If80989aac3c917beea2ebddf3cbb502849d394da
we check that the order in which we destroy GLConsumer wrt.
releasing the corresponding EGLSurface via eglMake(Un)Current
doesn't leak a buffer.
On at least 2 devices this test doesn't pass.
Change-Id: I63ab83951b4b0a977f38571158f948cbd9dc7cec
CpuConsumer cannot simply assume a slot's buffer is the same buffer
between acquire and release, and therefore it could be possible for
the same slot to get used for a second acquired buffer, if there's a
producer disconnect in between. This would cause a problem when the
first buffer is released by the consumer.
Instead, use an independent list of acquired buffers to properly track
their state.
Bug: 8291751
Change-Id: I0241ad8704e53d47318c7179b13daed8181b1fab
Writing a NULL Surface was being read as a non-NULL Surface with NULL
mGraphicBufferProducer. Before the SurfaceTextureClient -> Surface
refactoring, you'd get a NULL Surface, and some code relies on that.
Bug: 8291161
Change-Id: I477bfe8882693e53a5f604a3d2c9e3cfe24473b4
- SurfaceFlinger now supports to take a screenshot
directly into an IGraphicBufferProducer
- reimplement the IMemoryHeap screenshot on top
of the above
- reimplement LayerScreenshot such that its
BufferQueue is directly used as the destination
of the screenshot. LayerScreenshot is now a thin
wrapper around Layer
Bug: 6940974
Change-Id: I69a2096b44b91acbb99eba16f83a9c78d94e0d10
Temporary, to fix weekend build, until we get Nvidia code drop.
This reverts commit 9a867a8798
DO NOT MERGE
Change-Id: I7b5dbc4db46ef3d97dc8598057d5487d6971178b
We check that calling eglSwapBuffers() on an abandonned BufferQueue
return EGL_BAD_SURFACE -- this is to ensure consistancy between
drivers.
Change-Id: Ibb548e0cf767ceee69f2fc4a85811d15a6522277
This change eliminates the uses of a NULL sp<Fence> indicating that no waiting
is required. Instead we use a non-NULL but invalid Fence object for which the
wait methods will return immediately.
Bug: 7892871
Change-Id: I5360aebe3090422ef6920d56c99fc4eedc642e48
The C++ class names don't match what the classes do, so rename
ISurfaceTexture to IGraphicBufferProducer, and SurfaceTexture to
GLConsumer.
Bug 7736700
Change-Id: Ia03e468888025b5cae3c0ee1995434515dbea387
