ADHOC/replicant-frameworks_native
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
302dd91b86
replicant-frameworks_native/libs/utils/tests/PollLoop_test.cpp

371 lines
13 KiB
C++
Raw Normal View History

Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
//
// Copyright 2010 The Android Open Source Project
//
#include <utils/PollLoop.h>
#include <utils/Timers.h>
#include <utils/StopWatch.h>
#include <gtest/gtest.h>
#include <unistd.h>
#include <time.h>
#include "TestHelpers.h"
// # of milliseconds to fudge stopwatch measurements
#define TIMING_TOLERANCE_MS 25
namespace android {
class DelayedWake : public DelayedTask {
sp<PollLoop> mPollLoop;
public:
DelayedWake(int delayMillis, const sp<PollLoop> pollLoop) :
DelayedTask(delayMillis), mPollLoop(pollLoop) {
}
protected:
virtual void doTask() {
mPollLoop->wake();
}
};
class DelayedWriteSignal : public DelayedTask {
Pipe* mPipe;
public:
DelayedWriteSignal(int delayMillis, Pipe* pipe) :
DelayedTask(delayMillis), mPipe(pipe) {
}
protected:
virtual void doTask() {
mPipe->writeSignal();
}
};
class CallbackHandler {
public:
void setCallback(const sp<PollLoop>& pollLoop, int fd, int events) {
pollLoop->setCallback(fd, events, staticHandler, this);
}
protected:
virtual ~CallbackHandler() { }
virtual bool handler(int fd, int events) = 0;
private:
static bool staticHandler(int fd, int events, void* data) {
return static_cast<CallbackHandler*>(data)->handler(fd, events);
}
};
class StubCallbackHandler : public CallbackHandler {
public:
bool nextResult;
int callbackCount;
int fd;
int events;
StubCallbackHandler(bool nextResult) : nextResult(nextResult),
callbackCount(0), fd(-1), events(-1) {
}
protected:
virtual bool handler(int fd, int events) {
callbackCount += 1;
this->fd = fd;
this->events = events;
return nextResult;
}
};
class PollLoopTest : public testing::Test {
protected:
sp<PollLoop> mPollLoop;
virtual void SetUp() {
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
mPollLoop = new PollLoop(false);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
virtual void TearDown() {
mPollLoop.clear();
}
};
TEST_F(PollLoopTest, PollOnce_WhenNonZeroTimeoutAndNotAwoken_WaitsForTimeoutAndReturnsFalse) {
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(100);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
EXPECT_NEAR(100, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should approx. equal timeout";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_TIMEOUT)
<< "pollOnce result should be POLL_TIMEOUT";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
TEST_F(PollLoopTest, PollOnce_WhenNonZeroTimeoutAndAwokenBeforeWaiting_ImmediatelyReturnsTrue) {
mPollLoop->wake();
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(1000);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
EXPECT_NEAR(0, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should approx. zero because wake() was called before waiting";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_CALLBACK)
<< "pollOnce result should be POLL_CALLBACK because loop was awoken";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
TEST_F(PollLoopTest, PollOnce_WhenNonZeroTimeoutAndAwokenWhileWaiting_PromptlyReturnsTrue) {
sp<DelayedWake> delayedWake = new DelayedWake(100, mPollLoop);
delayedWake->run();
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(1000);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
EXPECT_NEAR(100, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should approx. equal wake delay";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_CALLBACK)
<< "pollOnce result should be POLL_CALLBACK because loop was awoken";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
TEST_F(PollLoopTest, PollOnce_WhenZeroTimeoutAndNoRegisteredFDs_ImmediatelyReturnsFalse) {
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(0);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
EXPECT_NEAR(0, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should be approx. zero";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_TIMEOUT)
<< "pollOnce result should be POLL_TIMEOUT";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
TEST_F(PollLoopTest, PollOnce_WhenZeroTimeoutAndNoSignalledFDs_ImmediatelyReturnsFalse) {
Pipe pipe;
StubCallbackHandler handler(true);
handler.setCallback(mPollLoop, pipe.receiveFd, POLL_IN);
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(0);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
EXPECT_NEAR(0, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should be approx. zero";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_TIMEOUT)
<< "pollOnce result should be POLL_TIMEOUT";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EXPECT_EQ(0, handler.callbackCount)
<< "callback should not have been invoked because FD was not signalled";
}
TEST_F(PollLoopTest, PollOnce_WhenZeroTimeoutAndSignalledFD_ImmediatelyInvokesCallbackAndReturnsTrue) {
Pipe pipe;
StubCallbackHandler handler(true);
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
ASSERT_EQ(OK, pipe.writeSignal());
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
handler.setCallback(mPollLoop, pipe.receiveFd, POLL_IN);
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(0);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
EXPECT_NEAR(0, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should be approx. zero";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_CALLBACK)
<< "pollOnce result should be POLL_CALLBACK because FD was signalled";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EXPECT_EQ(1, handler.callbackCount)
<< "callback should be invoked exactly once";
EXPECT_EQ(pipe.receiveFd, handler.fd)
<< "callback should have received pipe fd as parameter";
EXPECT_EQ(POLL_IN, handler.events)
<< "callback should have received POLL_IN as events";
}
TEST_F(PollLoopTest, PollOnce_WhenNonZeroTimeoutAndNoSignalledFDs_WaitsForTimeoutAndReturnsFalse) {
Pipe pipe;
StubCallbackHandler handler(true);
handler.setCallback(mPollLoop, pipe.receiveFd, POLL_IN);
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(100);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
EXPECT_NEAR(100, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should approx. equal timeout";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_TIMEOUT)
<< "pollOnce result should be POLL_TIMEOUT";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EXPECT_EQ(0, handler.callbackCount)
<< "callback should not have been invoked because FD was not signalled";
}
TEST_F(PollLoopTest, PollOnce_WhenNonZeroTimeoutAndSignalledFDBeforeWaiting_ImmediatelyInvokesCallbackAndReturnsTrue) {
Pipe pipe;
StubCallbackHandler handler(true);
pipe.writeSignal();
handler.setCallback(mPollLoop, pipe.receiveFd, POLL_IN);
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(100);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
ASSERT_EQ(OK, pipe.readSignal())
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
<< "signal should actually have been written";
EXPECT_NEAR(0, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should be approx. zero";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_CALLBACK)
<< "pollOnce result should be POLL_CALLBACK because FD was signalled";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EXPECT_EQ(1, handler.callbackCount)
<< "callback should be invoked exactly once";
EXPECT_EQ(pipe.receiveFd, handler.fd)
<< "callback should have received pipe fd as parameter";
EXPECT_EQ(POLL_IN, handler.events)
<< "callback should have received POLL_IN as events";
}
TEST_F(PollLoopTest, PollOnce_WhenNonZeroTimeoutAndSignalledFDWhileWaiting_PromptlyInvokesCallbackAndReturnsTrue) {
Pipe pipe;
StubCallbackHandler handler(true);
sp<DelayedWriteSignal> delayedWriteSignal = new DelayedWriteSignal(100, & pipe);
handler.setCallback(mPollLoop, pipe.receiveFd, POLL_IN);
delayedWriteSignal->run();
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(1000);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
ASSERT_EQ(OK, pipe.readSignal())
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
<< "signal should actually have been written";
EXPECT_NEAR(100, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should approx. equal signal delay";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_CALLBACK)
<< "pollOnce result should be POLL_CALLBACK because FD was signalled";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EXPECT_EQ(1, handler.callbackCount)
<< "callback should be invoked exactly once";
EXPECT_EQ(pipe.receiveFd, handler.fd)
<< "callback should have received pipe fd as parameter";
EXPECT_EQ(POLL_IN, handler.events)
<< "callback should have received POLL_IN as events";
}
TEST_F(PollLoopTest, PollOnce_WhenCallbackAddedThenRemoved_CallbackShouldNotBeInvoked) {
Pipe pipe;
StubCallbackHandler handler(true);
handler.setCallback(mPollLoop, pipe.receiveFd, POLL_IN);
pipe.writeSignal(); // would cause FD to be considered signalled
mPollLoop->removeCallback(pipe.receiveFd);
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(100);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
ASSERT_EQ(OK, pipe.readSignal())
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
<< "signal should actually have been written";
EXPECT_NEAR(100, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should approx. equal timeout because FD was no longer registered";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_TIMEOUT)
<< "pollOnce result should be POLL_TIMEOUT";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EXPECT_EQ(0, handler.callbackCount)
<< "callback should not be invoked";
}
TEST_F(PollLoopTest, PollOnce_WhenCallbackReturnsFalse_CallbackShouldNotBeInvokedAgainLater) {
Pipe pipe;
StubCallbackHandler handler(false);
handler.setCallback(mPollLoop, pipe.receiveFd, POLL_IN);
// First loop: Callback is registered and FD is signalled.
pipe.writeSignal();
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(0);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
ASSERT_EQ(OK, pipe.readSignal())
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
<< "signal should actually have been written";
EXPECT_NEAR(0, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should approx. equal zero because FD was already signalled";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_CALLBACK)
<< "pollOnce result should be POLL_CALLBACK because FD was signalled";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EXPECT_EQ(1, handler.callbackCount)
<< "callback should be invoked";
// Second loop: Callback is no longer registered and FD is signalled.
pipe.writeSignal();
stopWatch.reset();
result = mPollLoop->pollOnce(0);
elapsedMillis = ns2ms(stopWatch.elapsedTime());
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
ASSERT_EQ(OK, pipe.readSignal())
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
<< "signal should actually have been written";
EXPECT_NEAR(0, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should approx. equal zero because timeout was zero";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_TIMEOUT)
<< "pollOnce result should be POLL_TIMEOUT";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EXPECT_EQ(1, handler.callbackCount)
<< "callback should not be invoked this time";
}
TEST_F(PollLoopTest, RemoveCallback_WhenCallbackNotAdded_ReturnsFalse) {
bool result = mPollLoop->removeCallback(1);
EXPECT_FALSE(result)
<< "removeCallback should return false because FD not registered";
}
TEST_F(PollLoopTest, RemoveCallback_WhenCallbackAddedThenRemovedTwice_ReturnsTrueFirstTimeAndReturnsFalseSecondTime) {
Pipe pipe;
StubCallbackHandler handler(false);
handler.setCallback(mPollLoop, pipe.receiveFd, POLL_IN);
// First time.
bool result = mPollLoop->removeCallback(pipe.receiveFd);
EXPECT_TRUE(result)
<< "removeCallback should return true first time because FD was registered";
// Second time.
result = mPollLoop->removeCallback(pipe.receiveFd);
EXPECT_FALSE(result)
<< "removeCallback should return false second time because FD was no longer registered";
}
TEST_F(PollLoopTest, PollOnce_WhenCallbackAddedTwice_OnlySecondCallbackShouldBeInvoked) {
Pipe pipe;
StubCallbackHandler handler1(true);
StubCallbackHandler handler2(true);
handler1.setCallback(mPollLoop, pipe.receiveFd, POLL_IN);
handler2.setCallback(mPollLoop, pipe.receiveFd, POLL_IN); // replace it
pipe.writeSignal(); // would cause FD to be considered signalled
StopWatch stopWatch("pollOnce");
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
int32_t result = mPollLoop->pollOnce(100);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t elapsedMillis = ns2ms(stopWatch.elapsedTime());
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
ASSERT_EQ(OK, pipe.readSignal())
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
<< "signal should actually have been written";
EXPECT_NEAR(0, elapsedMillis, TIMING_TOLERANCE_MS)
<< "elapsed time should approx. zero because FD was already signalled";
Add new glue code for writing native apps. This factors out the boiler-plate code from the sample app to a common glue code that can be used for everyone writing this style of app: a dedicated app thread that takes care of waiting for events and processing them. As part of doing this, ALooper has a new facility to allow registration of fds that cause ALooper_pollOnce() to return the fd that has data, allowing the app to drive the loop without callbacks. Hopefully this makes some people feel better. :) Also do some other cleanup of the ALooper API, plus some actual documentation. Change-Id: Ic53bd56bdf627e3ba28a3c093faa06a92be522b8
2010-07-07 21:27:31 +00:00
EXPECT_EQ(result, PollLoop::POLL_CALLBACK)
<< "pollOnce result should be POLL_CALLBACK because FD was signalled";
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
EXPECT_EQ(0, handler1.callbackCount)
<< "original handler callback should not be invoked because it was replaced";
EXPECT_EQ(1, handler2.callbackCount)
<< "replacement handler callback should be invoked";
}
} // namespace android
Reference in New Issue Copy Permalink