ADHOC/replicant-frameworks_native
3
0
Fork 0
Code Issues 7 Pull Requests Releases Wiki Activity
0182b666c5
replicant-frameworks_native/libs/ui/InputDispatcher.cpp

3189 lines
119 KiB
C++
Raw Normal View History

Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
//
// Copyright 2010 The Android Open Source Project
//
// The input dispatcher.
//
#define LOG_TAG "InputDispatcher"
//#define LOG_NDEBUG 0
// Log detailed debug messages about each inbound event notification to the dispatcher.
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
#define DEBUG_INBOUND_EVENT_DETAILS 0
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Log detailed debug messages about each outbound event processed by the dispatcher.
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
#define DEBUG_OUTBOUND_EVENT_DETAILS 0
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Log debug messages about batching.
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
#define DEBUG_BATCHING 0
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Log debug messages about the dispatch cycle.
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
#define DEBUG_DISPATCH_CYCLE 0
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
// Log debug messages about registrations.
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
#define DEBUG_REGISTRATION 0
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Log debug messages about performance statistics.
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
#define DEBUG_PERFORMANCE_STATISTICS 0
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
// Log debug messages about input event injection.
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
#define DEBUG_INJECTION 0
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
// Log debug messages about input event throttling.
#define DEBUG_THROTTLING 0
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Log debug messages about input focus tracking.
#define DEBUG_FOCUS 0
// Log debug messages about the app switch latency optimization.
#define DEBUG_APP_SWITCH 0
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#include <cutils/log.h>
#include <ui/InputDispatcher.h>
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
#include <ui/PowerManager.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#include <stddef.h>
#include <unistd.h>
#include <errno.h>
#include <limits.h>
namespace android {
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Delay between reporting long touch events to the power manager.
const nsecs_t EVENT_IGNORE_DURATION = 300 * 1000000LL; // 300 ms
// Default input dispatching timeout if there is no focused application or paused window
// from which to determine an appropriate dispatching timeout.
const nsecs_t DEFAULT_INPUT_DISPATCHING_TIMEOUT = 5000 * 1000000LL; // 5 sec
// Amount of time to allow for all pending events to be processed when an app switch
// key is on the way. This is used to preempt input dispatch and drop input events
// when an application takes too long to respond and the user has pressed an app switch key.
const nsecs_t APP_SWITCH_TIMEOUT = 500 * 1000000LL; // 0.5sec
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
static inline nsecs_t now() {
return systemTime(SYSTEM_TIME_MONOTONIC);
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
static inline const char* toString(bool value) {
return value ? "true" : "false";
}
// --- InputWindow ---
bool InputWindow::visibleFrameIntersects(const InputWindow* other) const {
return visibleFrameRight > other->visibleFrameLeft
&& visibleFrameLeft < other->visibleFrameRight
&& visibleFrameBottom > other->visibleFrameTop
&& visibleFrameTop < other->visibleFrameBottom;
}
bool InputWindow::touchableAreaContainsPoint(int32_t x, int32_t y) const {
return x >= touchableAreaLeft && x <= touchableAreaRight
&& y >= touchableAreaTop && y <= touchableAreaBottom;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// --- InputDispatcher ---
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
InputDispatcher::InputDispatcher(const sp<InputDispatcherPolicyInterface>& policy) :
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
mPolicy(policy),
mPendingEvent(NULL), mAppSwitchDueTime(LONG_LONG_MAX),
mDispatchEnabled(true), mDispatchFrozen(false),
mFocusedWindow(NULL), mTouchDown(false), mTouchedWindow(NULL),
mFocusedApplication(NULL),
mCurrentInputTargetsValid(false),
mInputTargetWaitCause(INPUT_TARGET_WAIT_CAUSE_NONE) {
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper = new Looper(false);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
mInboundQueue.headSentinel.refCount = -1;
mInboundQueue.headSentinel.type = EventEntry::TYPE_SENTINEL;
mInboundQueue.headSentinel.eventTime = LONG_LONG_MIN;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
mInboundQueue.tailSentinel.refCount = -1;
mInboundQueue.tailSentinel.type = EventEntry::TYPE_SENTINEL;
mInboundQueue.tailSentinel.eventTime = LONG_LONG_MAX;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
mKeyRepeatState.lastKeyEntry = NULL;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
int32_t maxEventsPerSecond = policy->getMaxEventsPerSecond();
mThrottleState.minTimeBetweenEvents = 1000000000LL / maxEventsPerSecond;
mThrottleState.lastDeviceId = -1;
#if DEBUG_THROTTLING
mThrottleState.originalSampleCount = 0;
LOGD("Throttling - Max events per second = %d", maxEventsPerSecond);
#endif
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
InputDispatcher::~InputDispatcher() {
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
{ // acquire lock
AutoMutex _l(mLock);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
resetKeyRepeatLocked();
releasePendingEventLocked(true);
drainInboundQueueLocked();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
while (mConnectionsByReceiveFd.size() != 0) {
unregisterInputChannel(mConnectionsByReceiveFd.valueAt(0)->inputChannel);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
void InputDispatcher::dispatchOnce() {
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
nsecs_t keyRepeatTimeout = mPolicy->getKeyRepeatTimeout();
Fix key repeat delay. Change-Id: I6216e082324ee29bf50e37acc673350ca5417c4d
2010-09-07 17:44:57 +00:00
nsecs_t keyRepeatDelay = mPolicy->getKeyRepeatDelay();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
nsecs_t nextWakeupTime = LONG_LONG_MAX;
{ // acquire lock
AutoMutex _l(mLock);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
dispatchOnceInnerLocked(keyRepeatTimeout, keyRepeatDelay, & nextWakeupTime);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (runCommandsLockedInterruptible()) {
nextWakeupTime = LONG_LONG_MIN; // force next poll to wake up immediately
}
} // release lock
// Wait for callback or timeout or wake. (make sure we round up, not down)
nsecs_t currentTime = now();
int32_t timeoutMillis;
if (nextWakeupTime > currentTime) {
uint64_t timeout = uint64_t(nextWakeupTime - currentTime);
timeout = (timeout + 999999LL) / 1000000LL;
timeoutMillis = timeout > INT_MAX ? -1 : int32_t(timeout);
} else {
timeoutMillis = 0;
}
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->pollOnce(timeoutMillis);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
}
void InputDispatcher::dispatchOnceInnerLocked(nsecs_t keyRepeatTimeout,
nsecs_t keyRepeatDelay, nsecs_t* nextWakeupTime) {
nsecs_t currentTime = now();
// Reset the key repeat timer whenever we disallow key events, even if the next event
// is not a key. This is to ensure that we abort a key repeat if the device is just coming
// out of sleep.
if (keyRepeatTimeout < 0) {
resetKeyRepeatLocked();
}
// If dispatching is disabled, drop all events in the queue.
if (! mDispatchEnabled) {
if (mPendingEvent || ! mInboundQueue.isEmpty()) {
LOGI("Dropping pending events because input dispatch is disabled.");
releasePendingEventLocked(true);
drainInboundQueueLocked();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
return;
}
// If dispatching is frozen, do not process timeouts or try to deliver any new events.
if (mDispatchFrozen) {
#if DEBUG_FOCUS
LOGD("Dispatch frozen. Waiting some more.");
#endif
return;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Optimize latency of app switches.
// Essentially we start a short timeout when an app switch key (HOME / ENDCALL) has
// been pressed. When it expires, we preempt dispatch and drop all other pending events.
bool isAppSwitchDue = mAppSwitchDueTime <= currentTime;
if (mAppSwitchDueTime < *nextWakeupTime) {
*nextWakeupTime = mAppSwitchDueTime;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Detect and process timeouts for all connections and determine if there are any
// synchronous event dispatches pending. This step is entirely non-interruptible.
bool havePendingSyncTarget = false;
size_t activeConnectionCount = mActiveConnections.size();
for (size_t i = 0; i < activeConnectionCount; i++) {
Connection* connection = mActiveConnections.itemAt(i);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (connection->hasPendingSyncTarget()) {
if (isAppSwitchDue) {
connection->preemptSyncTarget();
} else {
havePendingSyncTarget = true;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
nsecs_t connectionTimeoutTime = connection->nextTimeoutTime;
if (connectionTimeoutTime <= currentTime) {
mTimedOutConnections.add(connection);
} else if (connectionTimeoutTime < *nextWakeupTime) {
*nextWakeupTime = connectionTimeoutTime;
}
}
size_t timedOutConnectionCount = mTimedOutConnections.size();
for (size_t i = 0; i < timedOutConnectionCount; i++) {
Connection* connection = mTimedOutConnections.itemAt(i);
timeoutDispatchCycleLocked(currentTime, connection);
*nextWakeupTime = LONG_LONG_MIN; // force next poll to wake up immediately
}
mTimedOutConnections.clear();
// If we have a pending synchronous target, skip dispatch.
if (havePendingSyncTarget) {
return;
}
// Ready to start a new event.
// If we don't already have a pending event, go grab one.
if (! mPendingEvent) {
if (mInboundQueue.isEmpty()) {
if (isAppSwitchDue) {
// The inbound queue is empty so the app switch key we were waiting
// for will never arrive. Stop waiting for it.
resetPendingAppSwitchLocked(false);
isAppSwitchDue = false;
}
// Synthesize a key repeat if appropriate.
if (mKeyRepeatState.lastKeyEntry) {
if (currentTime >= mKeyRepeatState.nextRepeatTime) {
mPendingEvent = synthesizeKeyRepeatLocked(currentTime, keyRepeatDelay);
} else {
if (mKeyRepeatState.nextRepeatTime < *nextWakeupTime) {
*nextWakeupTime = mKeyRepeatState.nextRepeatTime;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
}
if (! mPendingEvent) {
return;
}
} else {
// Inbound queue has at least one entry.
EventEntry* entry = mInboundQueue.headSentinel.next;
// Throttle the entry if it is a move event and there are no
// other events behind it in the queue. Due to movement batching, additional
// samples may be appended to this event by the time the throttling timeout
// expires.
// TODO Make this smarter and consider throttling per device independently.
if (entry->type == EventEntry::TYPE_MOTION) {
MotionEntry* motionEntry = static_cast<MotionEntry*>(entry);
int32_t deviceId = motionEntry->deviceId;
uint32_t source = motionEntry->source;
if (! isAppSwitchDue
&& motionEntry->next == & mInboundQueue.tailSentinel // exactly one event
&& motionEntry->action == AMOTION_EVENT_ACTION_MOVE
&& deviceId == mThrottleState.lastDeviceId
&& source == mThrottleState.lastSource) {
nsecs_t nextTime = mThrottleState.lastEventTime
+ mThrottleState.minTimeBetweenEvents;
if (currentTime < nextTime) {
// Throttle it!
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
#if DEBUG_THROTTLING
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
LOGD("Throttling - Delaying motion event for "
"device 0x%x, source 0x%08x by up to %0.3fms.",
deviceId, source, (nextTime - currentTime) * 0.000001);
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (nextTime < *nextWakeupTime) {
*nextWakeupTime = nextTime;
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (mThrottleState.originalSampleCount == 0) {
mThrottleState.originalSampleCount =
motionEntry->countSamples();
}
return;
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
}
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
#if DEBUG_THROTTLING
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (mThrottleState.originalSampleCount != 0) {
uint32_t count = motionEntry->countSamples();
LOGD("Throttling - Motion event sample count grew by %d from %d to %d.",
count - mThrottleState.originalSampleCount,
mThrottleState.originalSampleCount, count);
mThrottleState.originalSampleCount = 0;
}
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
mThrottleState.lastEventTime = entry->eventTime < currentTime
? entry->eventTime : currentTime;
mThrottleState.lastDeviceId = deviceId;
mThrottleState.lastSource = source;
}
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
mInboundQueue.dequeue(entry);
mPendingEvent = entry;
}
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Now we have an event to dispatch.
assert(mPendingEvent != NULL);
bool wasDispatched = false;
bool wasDropped = false;
switch (mPendingEvent->type) {
case EventEntry::TYPE_CONFIGURATION_CHANGED: {
ConfigurationChangedEntry* typedEntry =
static_cast<ConfigurationChangedEntry*>(mPendingEvent);
wasDispatched = dispatchConfigurationChangedLocked(currentTime, typedEntry);
break;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
case EventEntry::TYPE_KEY: {
KeyEntry* typedEntry = static_cast<KeyEntry*>(mPendingEvent);
if (isAppSwitchPendingLocked()) {
if (isAppSwitchKey(typedEntry->keyCode)) {
resetPendingAppSwitchLocked(true);
} else if (isAppSwitchDue) {
LOGI("Dropping key because of pending overdue app switch.");
wasDropped = true;
break;
}
}
wasDispatched = dispatchKeyLocked(currentTime, typedEntry, keyRepeatTimeout,
nextWakeupTime);
break;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
case EventEntry::TYPE_MOTION: {
MotionEntry* typedEntry = static_cast<MotionEntry*>(mPendingEvent);
if (isAppSwitchDue) {
LOGI("Dropping motion because of pending overdue app switch.");
wasDropped = true;
break;
}
wasDispatched = dispatchMotionLocked(currentTime, typedEntry, nextWakeupTime);
break;
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
default:
assert(false);
wasDropped = true;
break;
}
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (wasDispatched || wasDropped) {
releasePendingEventLocked(wasDropped);
*nextWakeupTime = LONG_LONG_MIN; // force next poll to wake up immediately
}
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
bool InputDispatcher::enqueueInboundEventLocked(EventEntry* entry) {
bool needWake = mInboundQueue.isEmpty();
mInboundQueue.enqueueAtTail(entry);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
switch (entry->type) {
case EventEntry::TYPE_KEY:
needWake |= detectPendingAppSwitchLocked(static_cast<KeyEntry*>(entry));
break;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
return needWake;
}
bool InputDispatcher::isAppSwitchKey(int32_t keyCode) {
return keyCode == AKEYCODE_HOME || keyCode == AKEYCODE_ENDCALL;
}
bool InputDispatcher::isAppSwitchPendingLocked() {
return mAppSwitchDueTime != LONG_LONG_MAX;
}
bool InputDispatcher::detectPendingAppSwitchLocked(KeyEntry* inboundKeyEntry) {
if (inboundKeyEntry->action == AKEY_EVENT_ACTION_UP
&& ! (inboundKeyEntry->flags & AKEY_EVENT_FLAG_CANCELED)
&& isAppSwitchKey(inboundKeyEntry->keyCode)
&& isEventFromReliableSourceLocked(inboundKeyEntry)) {
#if DEBUG_APP_SWITCH
LOGD("App switch is pending!");
#endif
mAppSwitchDueTime = inboundKeyEntry->eventTime + APP_SWITCH_TIMEOUT;
return true; // need wake
}
return false;
}
void InputDispatcher::resetPendingAppSwitchLocked(bool handled) {
mAppSwitchDueTime = LONG_LONG_MAX;
#if DEBUG_APP_SWITCH
if (handled) {
LOGD("App switch has arrived.");
} else {
LOGD("App switch was abandoned.");
}
#endif
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
bool InputDispatcher::runCommandsLockedInterruptible() {
if (mCommandQueue.isEmpty()) {
return false;
}
do {
CommandEntry* commandEntry = mCommandQueue.dequeueAtHead();
Command command = commandEntry->command;
(this->*command)(commandEntry); // commands are implicitly 'LockedInterruptible'
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
commandEntry->connection.clear();
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
mAllocator.releaseCommandEntry(commandEntry);
} while (! mCommandQueue.isEmpty());
return true;
}
InputDispatcher::CommandEntry* InputDispatcher::postCommandLocked(Command command) {
CommandEntry* commandEntry = mAllocator.obtainCommandEntry(command);
mCommandQueue.enqueueAtTail(commandEntry);
return commandEntry;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::drainInboundQueueLocked() {
while (! mInboundQueue.isEmpty()) {
EventEntry* entry = mInboundQueue.dequeueAtHead();
releaseInboundEventLocked(entry, true /*wasDropped*/);
}
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::releasePendingEventLocked(bool wasDropped) {
if (mPendingEvent) {
releaseInboundEventLocked(mPendingEvent, wasDropped);
mPendingEvent = NULL;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::releaseInboundEventLocked(EventEntry* entry, bool wasDropped) {
if (wasDropped) {
#if DEBUG_DISPATCH_CYCLE
LOGD("Pending event was dropped.");
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
setInjectionResultLocked(entry, INPUT_EVENT_INJECTION_FAILED);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
mAllocator.releaseEventEntry(entry);
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
bool InputDispatcher::isEventFromReliableSourceLocked(EventEntry* entry) {
return ! entry->isInjected()
|| entry->injectorUid == 0
|| mPolicy->checkInjectEventsPermissionNonReentrant(
entry->injectorPid, entry->injectorUid);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::resetKeyRepeatLocked() {
if (mKeyRepeatState.lastKeyEntry) {
mAllocator.releaseKeyEntry(mKeyRepeatState.lastKeyEntry);
mKeyRepeatState.lastKeyEntry = NULL;
}
}
InputDispatcher::KeyEntry* InputDispatcher::synthesizeKeyRepeatLocked(
Fix key repeat delay. Change-Id: I6216e082324ee29bf50e37acc673350ca5417c4d
2010-09-07 17:44:57 +00:00
nsecs_t currentTime, nsecs_t keyRepeatDelay) {
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
KeyEntry* entry = mKeyRepeatState.lastKeyEntry;
// Reuse the repeated key entry if it is otherwise unreferenced.
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
uint32_t policyFlags = entry->policyFlags & POLICY_FLAG_RAW_MASK;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
if (entry->refCount == 1) {
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
entry->recycle();
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
entry->eventTime = currentTime;
entry->policyFlags = policyFlags;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
entry->repeatCount += 1;
} else {
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
KeyEntry* newEntry = mAllocator.obtainKeyEntry(currentTime,
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
entry->deviceId, entry->source, policyFlags,
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
entry->action, entry->flags, entry->keyCode, entry->scanCode,
More native input dispatch work. Removed old input dispatch code. Refactored the policy callbacks. Pushed a tiny bit of the power manager state down to native. Fixed long press on MENU. Made the virtual key detection and cancelation a bit more precise. Change-Id: I5d8c1062f7ea0ab3b54c6fadb058c4d5f5a9e02e
2010-07-02 22:37:36 +00:00
entry->metaState, entry->repeatCount + 1, entry->downTime);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
mKeyRepeatState.lastKeyEntry = newEntry;
mAllocator.releaseKeyEntry(entry);
entry = newEntry;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
entry->syntheticRepeat = true;
// Increment reference count since we keep a reference to the event in
// mKeyRepeatState.lastKeyEntry in addition to the one we return.
entry->refCount += 1;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
More native input dispatch work. Removed old input dispatch code. Refactored the policy callbacks. Pushed a tiny bit of the power manager state down to native. Fixed long press on MENU. Made the virtual key detection and cancelation a bit more precise. Change-Id: I5d8c1062f7ea0ab3b54c6fadb058c4d5f5a9e02e
2010-07-02 22:37:36 +00:00
if (entry->repeatCount == 1) {
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
entry->flags |= AKEY_EVENT_FLAG_LONG_PRESS;
More native input dispatch work. Removed old input dispatch code. Refactored the policy callbacks. Pushed a tiny bit of the power manager state down to native. Fixed long press on MENU. Made the virtual key detection and cancelation a bit more precise. Change-Id: I5d8c1062f7ea0ab3b54c6fadb058c4d5f5a9e02e
2010-07-02 22:37:36 +00:00
}
Fix key repeat delay. Change-Id: I6216e082324ee29bf50e37acc673350ca5417c4d
2010-09-07 17:44:57 +00:00
mKeyRepeatState.nextRepeatTime = currentTime + keyRepeatDelay;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
return entry;
}
bool InputDispatcher::dispatchConfigurationChangedLocked(
nsecs_t currentTime, ConfigurationChangedEntry* entry) {
#if DEBUG_OUTBOUND_EVENT_DETAILS
LOGD("dispatchConfigurationChanged - eventTime=%lld", entry->eventTime);
#endif
// Reset key repeating in case a keyboard device was added or removed or something.
resetKeyRepeatLocked();
// Enqueue a command to run outside the lock to tell the policy that the configuration changed.
CommandEntry* commandEntry = postCommandLocked(
& InputDispatcher::doNotifyConfigurationChangedInterruptible);
commandEntry->eventTime = entry->eventTime;
return true;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
bool InputDispatcher::dispatchKeyLocked(
nsecs_t currentTime, KeyEntry* entry, nsecs_t keyRepeatTimeout,
nsecs_t* nextWakeupTime) {
// Preprocessing.
if (! entry->dispatchInProgress) {
logOutboundKeyDetailsLocked("dispatchKey - ", entry);
if (entry->repeatCount == 0
&& entry->action == AKEY_EVENT_ACTION_DOWN
&& ! entry->isInjected()) {
if (mKeyRepeatState.lastKeyEntry
&& mKeyRepeatState.lastKeyEntry->keyCode == entry->keyCode) {
// We have seen two identical key downs in a row which indicates that the device
// driver is automatically generating key repeats itself. We take note of the
// repeat here, but we disable our own next key repeat timer since it is clear that
// we will not need to synthesize key repeats ourselves.
entry->repeatCount = mKeyRepeatState.lastKeyEntry->repeatCount + 1;
resetKeyRepeatLocked();
mKeyRepeatState.nextRepeatTime = LONG_LONG_MAX; // don't generate repeats ourselves
} else {
// Not a repeat. Save key down state in case we do see a repeat later.
resetKeyRepeatLocked();
mKeyRepeatState.nextRepeatTime = entry->eventTime + keyRepeatTimeout;
}
mKeyRepeatState.lastKeyEntry = entry;
entry->refCount += 1;
} else if (! entry->syntheticRepeat) {
resetKeyRepeatLocked();
}
entry->dispatchInProgress = true;
startFindingTargetsLocked();
}
// Identify targets.
if (! mCurrentInputTargetsValid) {
InputWindow* window = NULL;
int32_t injectionResult = findFocusedWindowLocked(currentTime,
entry, nextWakeupTime, & window);
if (injectionResult == INPUT_EVENT_INJECTION_PENDING) {
return false;
}
setInjectionResultLocked(entry, injectionResult);
if (injectionResult != INPUT_EVENT_INJECTION_SUCCEEDED) {
return true;
}
addMonitoringTargetsLocked();
finishFindingTargetsLocked(window);
}
// Give the policy a chance to intercept the key.
if (entry->interceptKeyResult == KeyEntry::INTERCEPT_KEY_RESULT_UNKNOWN) {
CommandEntry* commandEntry = postCommandLocked(
& InputDispatcher::doInterceptKeyBeforeDispatchingLockedInterruptible);
commandEntry->inputChannel = mCurrentInputChannel;
commandEntry->keyEntry = entry;
entry->refCount += 1;
return false; // wait for the command to run
}
if (entry->interceptKeyResult == KeyEntry::INTERCEPT_KEY_RESULT_SKIP) {
return true;
}
// Dispatch the key.
dispatchEventToCurrentInputTargetsLocked(currentTime, entry, false);
// Poke user activity.
pokeUserActivityLocked(entry->eventTime, mCurrentInputWindowType, POWER_MANAGER_BUTTON_EVENT);
return true;
}
void InputDispatcher::logOutboundKeyDetailsLocked(const char* prefix, const KeyEntry* entry) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#if DEBUG_OUTBOUND_EVENT_DETAILS
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
LOGD("%seventTime=%lld, deviceId=0x%x, source=0x%x, policyFlags=0x%x, "
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
"action=0x%x, flags=0x%x, keyCode=0x%x, scanCode=0x%x, metaState=0x%x, "
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
"downTime=%lld",
prefix,
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
entry->eventTime, entry->deviceId, entry->source, entry->policyFlags,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
entry->action, entry->flags, entry->keyCode, entry->scanCode, entry->metaState,
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
entry->downTime);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
}
bool InputDispatcher::dispatchMotionLocked(
nsecs_t currentTime, MotionEntry* entry, nsecs_t* nextWakeupTime) {
// Preprocessing.
if (! entry->dispatchInProgress) {
logOutboundMotionDetailsLocked("dispatchMotion - ", entry);
entry->dispatchInProgress = true;
startFindingTargetsLocked();
}
bool isPointerEvent = entry->source & AINPUT_SOURCE_CLASS_POINTER;
// Identify targets.
if (! mCurrentInputTargetsValid) {
InputWindow* window = NULL;
int32_t injectionResult;
if (isPointerEvent) {
// Pointer event. (eg. touchscreen)
injectionResult = findTouchedWindowLocked(currentTime,
entry, nextWakeupTime, & window);
} else {
// Non touch event. (eg. trackball)
injectionResult = findFocusedWindowLocked(currentTime,
entry, nextWakeupTime, & window);
}
if (injectionResult == INPUT_EVENT_INJECTION_PENDING) {
return false;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
setInjectionResultLocked(entry, injectionResult);
if (injectionResult != INPUT_EVENT_INJECTION_SUCCEEDED) {
return true;
}
addMonitoringTargetsLocked();
finishFindingTargetsLocked(window);
}
// Dispatch the motion.
dispatchEventToCurrentInputTargetsLocked(currentTime, entry, false);
// Poke user activity.
int32_t eventType;
if (isPointerEvent) {
switch (entry->action) {
case AMOTION_EVENT_ACTION_DOWN:
eventType = POWER_MANAGER_TOUCH_EVENT;
break;
case AMOTION_EVENT_ACTION_UP:
eventType = POWER_MANAGER_TOUCH_UP_EVENT;
break;
default:
if (entry->eventTime - entry->downTime >= EVENT_IGNORE_DURATION) {
eventType = POWER_MANAGER_TOUCH_EVENT;
} else {
eventType = POWER_MANAGER_LONG_TOUCH_EVENT;
}
break;
}
} else {
eventType = POWER_MANAGER_BUTTON_EVENT;
}
pokeUserActivityLocked(entry->eventTime, mCurrentInputWindowType, eventType);
return true;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::logOutboundMotionDetailsLocked(const char* prefix, const MotionEntry* entry) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#if DEBUG_OUTBOUND_EVENT_DETAILS
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
LOGD("%seventTime=%lld, deviceId=0x%x, source=0x%x, policyFlags=0x%x, "
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
"action=0x%x, flags=0x%x, "
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
"metaState=0x%x, edgeFlags=0x%x, xPrecision=%f, yPrecision=%f, downTime=%lld",
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
prefix,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
entry->eventTime, entry->deviceId, entry->source, entry->policyFlags,
entry->action, entry->flags,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
entry->metaState, entry->edgeFlags, entry->xPrecision, entry->yPrecision,
entry->downTime);
// Print the most recent sample that we have available, this may change due to batching.
size_t sampleCount = 1;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
const MotionSample* sample = & entry->firstSample;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
for (; sample->next != NULL; sample = sample->next) {
sampleCount += 1;
}
for (uint32_t i = 0; i < entry->pointerCount; i++) {
Input device calibration and capabilities. Finished the input device capability API. Added a mechanism for calibrating touch devices to obtain more accurate information about the touch contact area. Improved pointer location to show new coordinates and capabilities. Optimized pointer location display and formatting to avoid allocating large numbers of temporary objects. The GC churn was causing the application to stutter very badly when more than a couple of fingers were down). Added more diagnostics. Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
2010-08-30 10:02:23 +00:00
LOGD(" Pointer %d: id=%d, x=%f, y=%f, pressure=%f, size=%f, "
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
"touchMajor=%f, touchMinor=%f, toolMajor=%f, toolMinor=%f, "
Input device calibration and capabilities. Finished the input device capability API. Added a mechanism for calibrating touch devices to obtain more accurate information about the touch contact area. Improved pointer location to show new coordinates and capabilities. Optimized pointer location display and formatting to avoid allocating large numbers of temporary objects. The GC churn was causing the application to stutter very badly when more than a couple of fingers were down). Added more diagnostics. Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
2010-08-30 10:02:23 +00:00
"orientation=%f",
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
i, entry->pointerIds[i],
Input device calibration and capabilities. Finished the input device capability API. Added a mechanism for calibrating touch devices to obtain more accurate information about the touch contact area. Improved pointer location to show new coordinates and capabilities. Optimized pointer location display and formatting to avoid allocating large numbers of temporary objects. The GC churn was causing the application to stutter very badly when more than a couple of fingers were down). Added more diagnostics. Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
2010-08-30 10:02:23 +00:00
sample->pointerCoords[i].x, sample->pointerCoords[i].y,
sample->pointerCoords[i].pressure, sample->pointerCoords[i].size,
sample->pointerCoords[i].touchMajor, sample->pointerCoords[i].touchMinor,
sample->pointerCoords[i].toolMajor, sample->pointerCoords[i].toolMinor,
sample->pointerCoords[i].orientation);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
// Keep in mind that due to batching, it is possible for the number of samples actually
// dispatched to change before the application finally consumed them.
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
if (entry->action == AMOTION_EVENT_ACTION_MOVE) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
LOGD(" ... Total movement samples currently batched %d ...", sampleCount);
}
#endif
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::dispatchEventToCurrentInputTargetsLocked(nsecs_t currentTime,
EventEntry* eventEntry, bool resumeWithAppendedMotionSample) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#if DEBUG_DISPATCH_CYCLE
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
LOGD("dispatchEventToCurrentInputTargets - "
"resumeWithAppendedMotionSample=%s",
toString(resumeWithAppendedMotionSample));
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
assert(eventEntry->dispatchInProgress); // should already have been set to true
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
for (size_t i = 0; i < mCurrentInputTargets.size(); i++) {
const InputTarget& inputTarget = mCurrentInputTargets.itemAt(i);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
ssize_t connectionIndex = getConnectionIndex(inputTarget.inputChannel);
if (connectionIndex >= 0) {
sp<Connection> connection = mConnectionsByReceiveFd.valueAt(connectionIndex);
prepareDispatchCycleLocked(currentTime, connection, eventEntry, & inputTarget,
resumeWithAppendedMotionSample);
} else {
LOGW("Framework requested delivery of an input event to channel '%s' but it "
"is not registered with the input dispatcher.",
inputTarget.inputChannel->getName().string());
}
}
}
void InputDispatcher::startFindingTargetsLocked() {
mCurrentInputTargetsValid = false;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
mCurrentInputTargets.clear();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
mCurrentInputChannel.clear();
mInputTargetWaitCause = INPUT_TARGET_WAIT_CAUSE_NONE;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::finishFindingTargetsLocked(const InputWindow* window) {
mCurrentInputWindowType = window->layoutParamsType;
mCurrentInputChannel = window->inputChannel;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
mCurrentInputTargetsValid = true;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
}
int32_t InputDispatcher::handleTargetsNotReadyLocked(nsecs_t currentTime,
const EventEntry* entry, const InputApplication* application, const InputWindow* window,
nsecs_t* nextWakeupTime) {
if (application == NULL && window == NULL) {
if (mInputTargetWaitCause != INPUT_TARGET_WAIT_CAUSE_SYSTEM_NOT_READY) {
#if DEBUG_FOCUS
LOGD("Waiting for system to become ready for input.");
#endif
mInputTargetWaitCause = INPUT_TARGET_WAIT_CAUSE_SYSTEM_NOT_READY;
mInputTargetWaitStartTime = currentTime;
mInputTargetWaitTimeoutTime = LONG_LONG_MAX;
mInputTargetWaitTimeoutExpired = false;
}
} else {
if (mInputTargetWaitCause != INPUT_TARGET_WAIT_CAUSE_APPLICATION_NOT_READY) {
#if DEBUG_FOCUS
LOGD("Waiting for application to become ready for input: name=%s, window=%s",
application ? application->name.string() : "<unknown>",
window ? window->inputChannel->getName().string() : "<unknown>");
#endif
nsecs_t timeout = window ? window->dispatchingTimeout :
application ? application->dispatchingTimeout : DEFAULT_INPUT_DISPATCHING_TIMEOUT;
mInputTargetWaitCause = INPUT_TARGET_WAIT_CAUSE_APPLICATION_NOT_READY;
mInputTargetWaitStartTime = currentTime;
mInputTargetWaitTimeoutTime = currentTime + timeout;
mInputTargetWaitTimeoutExpired = false;
}
}
if (mInputTargetWaitTimeoutExpired) {
return INPUT_EVENT_INJECTION_TIMED_OUT;
}
if (currentTime >= mInputTargetWaitTimeoutTime) {
LOGI("Application is not ready for input: name=%s, window=%s,"
"%01.1fms since event, %01.1fms since wait started",
application ? application->name.string() : "<unknown>",
window ? window->inputChannel->getName().string() : "<unknown>",
(currentTime - entry->eventTime) / 1000000.0,
(currentTime - mInputTargetWaitStartTime) / 1000000.0);
CommandEntry* commandEntry = postCommandLocked(
& InputDispatcher::doTargetsNotReadyTimeoutLockedInterruptible);
if (application) {
commandEntry->inputApplicationHandle = application->handle;
}
if (window) {
commandEntry->inputChannel = window->inputChannel;
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Force poll loop to wake up immediately on next iteration once we get the
// ANR response back from the policy.
*nextWakeupTime = LONG_LONG_MIN;
return INPUT_EVENT_INJECTION_PENDING;
} else {
// Force poll loop to wake up when timeout is due.
if (mInputTargetWaitTimeoutTime < *nextWakeupTime) {
*nextWakeupTime = mInputTargetWaitTimeoutTime;
}
return INPUT_EVENT_INJECTION_PENDING;
}
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::resumeAfterTargetsNotReadyTimeoutLocked(nsecs_t newTimeout) {
if (newTimeout > 0) {
// Extend the timeout.
mInputTargetWaitTimeoutTime = now() + newTimeout;
} else {
// Give up.
mInputTargetWaitTimeoutExpired = true;
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
nsecs_t InputDispatcher::getTimeSpentWaitingForApplicationWhileFindingTargetsLocked(
nsecs_t currentTime) {
if (mInputTargetWaitCause == INPUT_TARGET_WAIT_CAUSE_APPLICATION_NOT_READY) {
return currentTime - mInputTargetWaitStartTime;
}
return 0;
}
void InputDispatcher::resetANRTimeoutsLocked() {
#if DEBUG_FOCUS
LOGD("Resetting ANR timeouts.");
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Reset timeouts for all active connections.
nsecs_t currentTime = now();
for (size_t i = 0; i < mActiveConnections.size(); i++) {
Connection* connection = mActiveConnections[i];
connection->resetTimeout(currentTime);
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Reset input target wait timeout.
mInputTargetWaitCause = INPUT_TARGET_WAIT_CAUSE_NONE;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
int32_t InputDispatcher::findFocusedWindowLocked(nsecs_t currentTime, const EventEntry* entry,
nsecs_t* nextWakeupTime, InputWindow** outWindow) {
*outWindow = NULL;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
mCurrentInputTargets.clear();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
int32_t injectionResult;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// If there is no currently focused window and no focused application
// then drop the event.
if (! mFocusedWindow) {
if (mFocusedApplication) {
#if DEBUG_FOCUS
LOGD("Waiting because there is no focused window but there is a "
"focused application that may eventually add a window: '%s'.",
mFocusedApplication->name.string());
#endif
injectionResult = handleTargetsNotReadyLocked(currentTime, entry,
mFocusedApplication, NULL, nextWakeupTime);
goto Unresponsive;
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
LOGI("Dropping event because there is no focused window or focused application.");
injectionResult = INPUT_EVENT_INJECTION_FAILED;
goto Failed;
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Check permissions.
if (! checkInjectionPermission(mFocusedWindow, entry->injectorPid, entry->injectorUid)) {
injectionResult = INPUT_EVENT_INJECTION_PERMISSION_DENIED;
goto Failed;
}
// If the currently focused window is paused then keep waiting.
if (mFocusedWindow->paused) {
#if DEBUG_FOCUS
LOGD("Waiting because focused window is paused.");
#endif
injectionResult = handleTargetsNotReadyLocked(currentTime, entry,
mFocusedApplication, mFocusedWindow, nextWakeupTime);
goto Unresponsive;
}
// Success! Output targets.
injectionResult = INPUT_EVENT_INJECTION_SUCCEEDED;
*outWindow = mFocusedWindow;
addWindowTargetLocked(mFocusedWindow, InputTarget::FLAG_SYNC,
getTimeSpentWaitingForApplicationWhileFindingTargetsLocked(currentTime));
// Done.
Failed:
Unresponsive:
#if DEBUG_FOCUS
LOGD("findFocusedWindow finished: injectionResult=%d",
injectionResult);
logDispatchStateLocked();
#endif
return injectionResult;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
int32_t InputDispatcher::findTouchedWindowLocked(nsecs_t currentTime, const MotionEntry* entry,
nsecs_t* nextWakeupTime, InputWindow** outWindow) {
enum InjectionPermission {
INJECTION_PERMISSION_UNKNOWN,
INJECTION_PERMISSION_GRANTED,
INJECTION_PERMISSION_DENIED
};
*outWindow = NULL;
mCurrentInputTargets.clear();
nsecs_t startTime = now();
// For security reasons, we defer updating the touch state until we are sure that
// event injection will be allowed.
//
// FIXME In the original code, screenWasOff could never be set to true.
// The reason is that the POLICY_FLAG_WOKE_HERE
// and POLICY_FLAG_BRIGHT_HERE flags were set only when preprocessing raw
// EV_KEY, EV_REL and EV_ABS events. As it happens, the touch event was
// actually enqueued using the policyFlags that appeared in the final EV_SYN
// events upon which no preprocessing took place. So policyFlags was always 0.
// In the new native input dispatcher we're a bit more careful about event
// preprocessing so the touches we receive can actually have non-zero policyFlags.
// Unfortunately we obtain undesirable behavior.
//
// Here's what happens:
//
// When the device dims in anticipation of going to sleep, touches
// in windows which have FLAG_TOUCHABLE_WHEN_WAKING cause
// the device to brighten and reset the user activity timer.
// Touches on other windows (such as the launcher window)
// are dropped. Then after a moment, the device goes to sleep. Oops.
//
// Also notice how screenWasOff was being initialized using POLICY_FLAG_BRIGHT_HERE
// instead of POLICY_FLAG_WOKE_HERE...
//
bool screenWasOff = false; // original policy: policyFlags & POLICY_FLAG_BRIGHT_HERE;
int32_t action = entry->action;
// Update the touch state as needed based on the properties of the touch event.
int32_t injectionResult;
InjectionPermission injectionPermission;
if (action == AMOTION_EVENT_ACTION_DOWN) {
/* Case 1: ACTION_DOWN */
InputWindow* newTouchedWindow = NULL;
mTempTouchedOutsideTargets.clear();
int32_t x = int32_t(entry->firstSample.pointerCoords[0].x);
int32_t y = int32_t(entry->firstSample.pointerCoords[0].y);
InputWindow* topErrorWindow = NULL;
bool obscured = false;
// Traverse windows from front to back to find touched window and outside targets.
size_t numWindows = mWindows.size();
for (size_t i = 0; i < numWindows; i++) {
InputWindow* window = & mWindows.editItemAt(i);
int32_t flags = window->layoutParamsFlags;
if (flags & InputWindow::FLAG_SYSTEM_ERROR) {
if (! topErrorWindow) {
topErrorWindow = window;
}
}
if (window->visible) {
if (! (flags & InputWindow::FLAG_NOT_TOUCHABLE)) {
bool isTouchModal = (flags & (InputWindow::FLAG_NOT_FOCUSABLE
| InputWindow::FLAG_NOT_TOUCH_MODAL)) == 0;
if (isTouchModal || window->touchableAreaContainsPoint(x, y)) {
if (! screenWasOff || flags & InputWindow::FLAG_TOUCHABLE_WHEN_WAKING) {
newTouchedWindow = window;
obscured = isWindowObscuredLocked(window);
}
break; // found touched window, exit window loop
}
}
if (flags & InputWindow::FLAG_WATCH_OUTSIDE_TOUCH) {
OutsideTarget outsideTarget;
outsideTarget.window = window;
outsideTarget.obscured = isWindowObscuredLocked(window);
mTempTouchedOutsideTargets.push(outsideTarget);
}
}
}
// If there is an error window but it is not taking focus (typically because
// it is invisible) then wait for it. Any other focused window may in
// fact be in ANR state.
if (topErrorWindow && newTouchedWindow != topErrorWindow) {
#if DEBUG_FOCUS
LOGD("Waiting because system error window is pending.");
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
injectionResult = handleTargetsNotReadyLocked(currentTime, entry,
NULL, NULL, nextWakeupTime);
injectionPermission = INJECTION_PERMISSION_UNKNOWN;
goto Unresponsive;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// If we did not find a touched window then fail.
if (! newTouchedWindow) {
if (mFocusedApplication) {
#if DEBUG_FOCUS
LOGD("Waiting because there is no touched window but there is a "
"focused application that may eventually add a new window: '%s'.",
mFocusedApplication->name.string());
#endif
injectionResult = handleTargetsNotReadyLocked(currentTime, entry,
mFocusedApplication, NULL, nextWakeupTime);
injectionPermission = INJECTION_PERMISSION_UNKNOWN;
goto Unresponsive;
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
LOGI("Dropping event because there is no touched window or focused application.");
injectionResult = INPUT_EVENT_INJECTION_FAILED;
injectionPermission = INJECTION_PERMISSION_UNKNOWN;
goto Failed;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Check permissions.
if (! checkInjectionPermission(newTouchedWindow, entry->injectorPid, entry->injectorUid)) {
injectionResult = INPUT_EVENT_INJECTION_PERMISSION_DENIED;
injectionPermission = INJECTION_PERMISSION_DENIED;
goto Failed;
}
// If the touched window is paused then keep waiting.
if (newTouchedWindow->paused) {
#if DEBUG_INPUT_DISPATCHER_POLICY
LOGD("Waiting because touched window is paused.");
#endif
injectionResult = handleTargetsNotReadyLocked(currentTime, entry,
NULL, newTouchedWindow, nextWakeupTime);
injectionPermission = INJECTION_PERMISSION_GRANTED;
goto Unresponsive;
}
// Success! Update the touch dispatch state for real.
releaseTouchedWindowLocked();
mTouchedWindow = newTouchedWindow;
mTouchedWindowIsObscured = obscured;
if (newTouchedWindow->hasWallpaper) {
mTouchedWallpaperWindows.appendVector(mWallpaperWindows);
}
} else {
/* Case 2: Everything but ACTION_DOWN */
// Check permissions.
if (! checkInjectionPermission(mTouchedWindow, entry->injectorPid, entry->injectorUid)) {
injectionResult = INPUT_EVENT_INJECTION_PERMISSION_DENIED;
injectionPermission = INJECTION_PERMISSION_DENIED;
goto Failed;
}
// If the pointer is not currently down, then ignore the event.
if (! mTouchDown) {
LOGI("Dropping event because the pointer is not down.");
injectionResult = INPUT_EVENT_INJECTION_FAILED;
injectionPermission = INJECTION_PERMISSION_GRANTED;
goto Failed;
}
// If there is no currently touched window then fail.
if (! mTouchedWindow) {
#if DEBUG_INPUT_DISPATCHER_POLICY
LOGD("Dropping event because there is no touched window to receive it.");
#endif
injectionResult = INPUT_EVENT_INJECTION_FAILED;
injectionPermission = INJECTION_PERMISSION_GRANTED;
goto Failed;
}
// If the touched window is paused then keep waiting.
if (mTouchedWindow->paused) {
#if DEBUG_INPUT_DISPATCHER_POLICY
LOGD("Waiting because touched window is paused.");
#endif
injectionResult = handleTargetsNotReadyLocked(currentTime, entry,
NULL, mTouchedWindow, nextWakeupTime);
injectionPermission = INJECTION_PERMISSION_GRANTED;
goto Unresponsive;
}
}
// Success! Output targets.
injectionResult = INPUT_EVENT_INJECTION_SUCCEEDED;
injectionPermission = INJECTION_PERMISSION_GRANTED;
{
size_t numWallpaperWindows = mTouchedWallpaperWindows.size();
for (size_t i = 0; i < numWallpaperWindows; i++) {
addWindowTargetLocked(mTouchedWallpaperWindows[i],
InputTarget::FLAG_WINDOW_IS_OBSCURED, 0);
}
size_t numOutsideTargets = mTempTouchedOutsideTargets.size();
for (size_t i = 0; i < numOutsideTargets; i++) {
const OutsideTarget& outsideTarget = mTempTouchedOutsideTargets[i];
int32_t outsideTargetFlags = InputTarget::FLAG_OUTSIDE;
if (outsideTarget.obscured) {
outsideTargetFlags |= InputTarget::FLAG_WINDOW_IS_OBSCURED;
}
addWindowTargetLocked(outsideTarget.window, outsideTargetFlags, 0);
}
mTempTouchedOutsideTargets.clear();
int32_t targetFlags = InputTarget::FLAG_SYNC;
if (mTouchedWindowIsObscured) {
targetFlags |= InputTarget::FLAG_WINDOW_IS_OBSCURED;
}
addWindowTargetLocked(mTouchedWindow, targetFlags,
getTimeSpentWaitingForApplicationWhileFindingTargetsLocked(currentTime));
*outWindow = mTouchedWindow;
}
Failed:
// Check injection permission once and for all.
if (injectionPermission == INJECTION_PERMISSION_UNKNOWN) {
if (checkInjectionPermission(action == AMOTION_EVENT_ACTION_DOWN ? NULL : mTouchedWindow,
entry->injectorPid, entry->injectorUid)) {
injectionPermission = INJECTION_PERMISSION_GRANTED;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
} else {
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
injectionPermission = INJECTION_PERMISSION_DENIED;
}
}
// Update final pieces of touch state if the injector had permission.
if (injectionPermission == INJECTION_PERMISSION_GRANTED) {
if (action == AMOTION_EVENT_ACTION_DOWN) {
if (mTouchDown) {
// This is weird. We got a down but we thought it was already down!
LOGW("Pointer down received while already down.");
} else {
mTouchDown = true;
}
if (injectionResult != INPUT_EVENT_INJECTION_SUCCEEDED) {
// Since we failed to identify a target for this touch down, we may still
// be holding on to an earlier target from a previous touch down. Release it.
releaseTouchedWindowLocked();
}
} else if (action == AMOTION_EVENT_ACTION_UP) {
mTouchDown = false;
releaseTouchedWindowLocked();
}
} else {
LOGW("Not updating touch focus because injection was denied.");
}
Unresponsive:
#if DEBUG_FOCUS
LOGD("findTouchedWindow finished: injectionResult=%d, injectionPermission=%d",
injectionResult, injectionPermission);
logDispatchStateLocked();
#endif
return injectionResult;
}
void InputDispatcher::releaseTouchedWindowLocked() {
mTouchedWindow = NULL;
mTouchedWindowIsObscured = false;
mTouchedWallpaperWindows.clear();
}
void InputDispatcher::addWindowTargetLocked(const InputWindow* window, int32_t targetFlags,
nsecs_t timeSpentWaitingForApplication) {
mCurrentInputTargets.push();
InputTarget& target = mCurrentInputTargets.editTop();
target.inputChannel = window->inputChannel;
target.flags = targetFlags;
target.timeout = window->dispatchingTimeout;
target.timeSpentWaitingForApplication = timeSpentWaitingForApplication;
target.xOffset = - window->frameLeft;
target.yOffset = - window->frameTop;
}
void InputDispatcher::addMonitoringTargetsLocked() {
for (size_t i = 0; i < mMonitoringChannels.size(); i++) {
mCurrentInputTargets.push();
InputTarget& target = mCurrentInputTargets.editTop();
target.inputChannel = mMonitoringChannels[i];
target.flags = 0;
target.timeout = -1;
target.timeSpentWaitingForApplication = 0;
target.xOffset = 0;
target.yOffset = 0;
}
}
bool InputDispatcher::checkInjectionPermission(const InputWindow* window,
int32_t injectorPid, int32_t injectorUid) {
if (injectorUid > 0 && (window == NULL || window->ownerUid != injectorUid)) {
bool result = mPolicy->checkInjectEventsPermissionNonReentrant(injectorPid, injectorUid);
if (! result) {
if (window) {
LOGW("Permission denied: injecting event from pid %d uid %d to window "
"with input channel %s owned by uid %d",
injectorPid, injectorUid, window->inputChannel->getName().string(),
window->ownerUid);
} else {
LOGW("Permission denied: injecting event from pid %d uid %d",
injectorPid, injectorUid);
}
return false;
}
}
return true;
}
bool InputDispatcher::isWindowObscuredLocked(const InputWindow* window) {
size_t numWindows = mWindows.size();
for (size_t i = 0; i < numWindows; i++) {
const InputWindow* other = & mWindows.itemAt(i);
if (other == window) {
break;
}
if (other->visible && window->visibleFrameIntersects(other)) {
return true;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
return false;
}
void InputDispatcher::pokeUserActivityLocked(nsecs_t eventTime,
int32_t windowType, int32_t eventType) {
CommandEntry* commandEntry = postCommandLocked(
& InputDispatcher::doPokeUserActivityLockedInterruptible);
commandEntry->eventTime = eventTime;
commandEntry->windowType = windowType;
commandEntry->userActivityEventType = eventType;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
void InputDispatcher::prepareDispatchCycleLocked(nsecs_t currentTime,
const sp<Connection>& connection, EventEntry* eventEntry, const InputTarget* inputTarget,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
bool resumeWithAppendedMotionSample) {
#if DEBUG_DISPATCH_CYCLE
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
LOGD("channel '%s' ~ prepareDispatchCycle - flags=%d, timeout=%lldns, "
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
"xOffset=%f, yOffset=%f, resumeWithAppendedMotionSample=%s",
connection->getInputChannelName(), inputTarget->flags, inputTarget->timeout,
inputTarget->xOffset, inputTarget->yOffset,
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
toString(resumeWithAppendedMotionSample));
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#endif
// Skip this event if the connection status is not normal.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// We don't want to enqueue additional outbound events if the connection is broken or
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// not responding.
if (connection->status != Connection::STATUS_NORMAL) {
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
LOGW("channel '%s' ~ Dropping event because the channel status is %s",
connection->getInputChannelName(), connection->getStatusLabel());
// If the connection is not responding but the user is poking the application anyways,
// retrigger the original timeout.
if (connection->status == Connection::STATUS_NOT_RESPONDING) {
timeoutDispatchCycleLocked(currentTime, connection);
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return;
}
// Resume the dispatch cycle with a freshly appended motion sample.
// First we check that the last dispatch entry in the outbound queue is for the same
// motion event to which we appended the motion sample. If we find such a dispatch
// entry, and if it is currently in progress then we try to stream the new sample.
bool wasEmpty = connection->outboundQueue.isEmpty();
if (! wasEmpty && resumeWithAppendedMotionSample) {
DispatchEntry* motionEventDispatchEntry =
connection->findQueuedDispatchEntryForEvent(eventEntry);
if (motionEventDispatchEntry) {
// If the dispatch entry is not in progress, then we must be busy dispatching an
// earlier event. Not a problem, the motion event is on the outbound queue and will
// be dispatched later.
if (! motionEventDispatchEntry->inProgress) {
#if DEBUG_BATCHING
LOGD("channel '%s' ~ Not streaming because the motion event has "
"not yet been dispatched. "
"(Waiting for earlier events to be consumed.)",
connection->getInputChannelName());
#endif
return;
}
// If the dispatch entry is in progress but it already has a tail of pending
// motion samples, then it must mean that the shared memory buffer filled up.
// Not a problem, when this dispatch cycle is finished, we will eventually start
// a new dispatch cycle to process the tail and that tail includes the newly
// appended motion sample.
if (motionEventDispatchEntry->tailMotionSample) {
#if DEBUG_BATCHING
LOGD("channel '%s' ~ Not streaming because no new samples can "
"be appended to the motion event in this dispatch cycle. "
"(Waiting for next dispatch cycle to start.)",
connection->getInputChannelName());
#endif
return;
}
// The dispatch entry is in progress and is still potentially open for streaming.
// Try to stream the new motion sample. This might fail if the consumer has already
// consumed the motion event (or if the channel is broken).
MotionSample* appendedMotionSample = static_cast<MotionEntry*>(eventEntry)->lastSample;
status_t status = connection->inputPublisher.appendMotionSample(
appendedMotionSample->eventTime, appendedMotionSample->pointerCoords);
if (status == OK) {
#if DEBUG_BATCHING
LOGD("channel '%s' ~ Successfully streamed new motion sample.",
connection->getInputChannelName());
#endif
return;
}
#if DEBUG_BATCHING
if (status == NO_MEMORY) {
LOGD("channel '%s' ~ Could not append motion sample to currently "
"dispatched move event because the shared memory buffer is full. "
"(Waiting for next dispatch cycle to start.)",
connection->getInputChannelName());
} else if (status == status_t(FAILED_TRANSACTION)) {
LOGD("channel '%s' ~ Could not append motion sample to currently "
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
"dispatched move event because the event has already been consumed. "
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
"(Waiting for next dispatch cycle to start.)",
connection->getInputChannelName());
} else {
LOGD("channel '%s' ~ Could not append motion sample to currently "
"dispatched move event due to an error, status=%d. "
"(Waiting for next dispatch cycle to start.)",
connection->getInputChannelName(), status);
}
#endif
// Failed to stream. Start a new tail of pending motion samples to dispatch
// in the next cycle.
motionEventDispatchEntry->tailMotionSample = appendedMotionSample;
return;
}
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Bring the input state back in line with reality in case it drifted off during an ANR.
if (connection->inputState.isOutOfSync()) {
mTempCancelationEvents.clear();
connection->inputState.synthesizeCancelationEvents(& mAllocator, mTempCancelationEvents);
connection->inputState.resetOutOfSync();
if (! mTempCancelationEvents.isEmpty()) {
LOGI("channel '%s' ~ Generated %d cancelation events to bring channel back in sync "
"with reality.",
connection->getInputChannelName(), mTempCancelationEvents.size());
for (size_t i = 0; i < mTempCancelationEvents.size(); i++) {
EventEntry* cancelationEventEntry = mTempCancelationEvents.itemAt(i);
switch (cancelationEventEntry->type) {
case EventEntry::TYPE_KEY:
logOutboundKeyDetailsLocked(" ",
static_cast<KeyEntry*>(cancelationEventEntry));
break;
case EventEntry::TYPE_MOTION:
logOutboundMotionDetailsLocked(" ",
static_cast<MotionEntry*>(cancelationEventEntry));
break;
}
DispatchEntry* cancelationDispatchEntry =
mAllocator.obtainDispatchEntry(cancelationEventEntry,
0, inputTarget->xOffset, inputTarget->yOffset, inputTarget->timeout);
connection->outboundQueue.enqueueAtTail(cancelationDispatchEntry);
mAllocator.releaseEventEntry(cancelationEventEntry);
}
}
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// This is a new event.
// Enqueue a new dispatch entry onto the outbound queue for this connection.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
DispatchEntry* dispatchEntry = mAllocator.obtainDispatchEntry(eventEntry, // increments ref
inputTarget->flags, inputTarget->xOffset, inputTarget->yOffset,
inputTarget->timeout);
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
if (dispatchEntry->isSyncTarget()) {
eventEntry->pendingSyncDispatches += 1;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Handle the case where we could not stream a new motion sample because the consumer has
// already consumed the motion event (otherwise the corresponding dispatch entry would
// still be in the outbound queue for this connection). We set the head motion sample
// to the list starting with the newly appended motion sample.
if (resumeWithAppendedMotionSample) {
#if DEBUG_BATCHING
LOGD("channel '%s' ~ Preparing a new dispatch cycle for additional motion samples "
"that cannot be streamed because the motion event has already been consumed.",
connection->getInputChannelName());
#endif
MotionSample* appendedMotionSample = static_cast<MotionEntry*>(eventEntry)->lastSample;
dispatchEntry->headMotionSample = appendedMotionSample;
}
// Enqueue the dispatch entry.
connection->outboundQueue.enqueueAtTail(dispatchEntry);
// If the outbound queue was previously empty, start the dispatch cycle going.
if (wasEmpty) {
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
activateConnectionLocked(connection.get());
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
startDispatchCycleLocked(currentTime, connection,
inputTarget->timeSpentWaitingForApplication);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
void InputDispatcher::startDispatchCycleLocked(nsecs_t currentTime,
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
const sp<Connection>& connection, nsecs_t timeSpentWaitingForApplication) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#if DEBUG_DISPATCH_CYCLE
LOGD("channel '%s' ~ startDispatchCycle",
connection->getInputChannelName());
#endif
assert(connection->status == Connection::STATUS_NORMAL);
assert(! connection->outboundQueue.isEmpty());
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
DispatchEntry* dispatchEntry = connection->outboundQueue.headSentinel.next;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
assert(! dispatchEntry->inProgress);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Mark the dispatch entry as in progress.
dispatchEntry->inProgress = true;
// Update the connection's input state.
InputState::Consistency consistency = connection->inputState.trackEvent(
dispatchEntry->eventEntry);
#if FILTER_INPUT_EVENTS
// Filter out inconsistent sequences of input events.
// The input system may drop or inject events in a way that could violate implicit
// invariants on input state and potentially cause an application to crash
// or think that a key or pointer is stuck down. Technically we make no guarantees
// of consistency but it would be nice to improve on this where possible.
// XXX: This code is a proof of concept only. Not ready for prime time.
if (consistency == InputState::TOLERABLE) {
#if DEBUG_DISPATCH_CYCLE
LOGD("channel '%s' ~ Sending an event that is inconsistent with the connection's "
"current input state but that is likely to be tolerated by the application.",
connection->getInputChannelName());
#endif
} else if (consistency == InputState::BROKEN) {
LOGI("channel '%s' ~ Dropping an event that is inconsistent with the connection's "
"current input state and that is likely to cause the application to crash.",
connection->getInputChannelName());
startNextDispatchCycleLocked(currentTime, connection);
return;
}
#endif
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Publish the event.
status_t status;
switch (dispatchEntry->eventEntry->type) {
case EventEntry::TYPE_KEY: {
KeyEntry* keyEntry = static_cast<KeyEntry*>(dispatchEntry->eventEntry);
// Apply target flags.
int32_t action = keyEntry->action;
int32_t flags = keyEntry->flags;
if (dispatchEntry->targetFlags & InputTarget::FLAG_CANCEL) {
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
flags |= AKEY_EVENT_FLAG_CANCELED;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
// Publish the key event.
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
status = connection->inputPublisher.publishKeyEvent(keyEntry->deviceId, keyEntry->source,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
action, flags, keyEntry->keyCode, keyEntry->scanCode,
keyEntry->metaState, keyEntry->repeatCount, keyEntry->downTime,
keyEntry->eventTime);
if (status) {
LOGE("channel '%s' ~ Could not publish key event, "
"status=%d", connection->getInputChannelName(), status);
abortDispatchCycleLocked(currentTime, connection, true /*broken*/);
return;
}
break;
}
case EventEntry::TYPE_MOTION: {
MotionEntry* motionEntry = static_cast<MotionEntry*>(dispatchEntry->eventEntry);
// Apply target flags.
int32_t action = motionEntry->action;
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
int32_t flags = motionEntry->flags;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
if (dispatchEntry->targetFlags & InputTarget::FLAG_OUTSIDE) {
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
action = AMOTION_EVENT_ACTION_OUTSIDE;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
if (dispatchEntry->targetFlags & InputTarget::FLAG_CANCEL) {
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
action = AMOTION_EVENT_ACTION_CANCEL;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
if (dispatchEntry->targetFlags & InputTarget::FLAG_WINDOW_IS_OBSCURED) {
flags |= AMOTION_EVENT_FLAG_WINDOW_IS_OBSCURED;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// If headMotionSample is non-NULL, then it points to the first new sample that we
// were unable to dispatch during the previous cycle so we resume dispatching from
// that point in the list of motion samples.
// Otherwise, we just start from the first sample of the motion event.
MotionSample* firstMotionSample = dispatchEntry->headMotionSample;
if (! firstMotionSample) {
firstMotionSample = & motionEntry->firstSample;
}
Fix trackball down and movement bugs. Bug: 2823788 Change-Id: Icb0c392b58f7e735614460b5eb87439cb73ac4f2
2010-07-17 00:21:06 +00:00
// Set the X and Y offset depending on the input source.
float xOffset, yOffset;
if (motionEntry->source & AINPUT_SOURCE_CLASS_POINTER) {
xOffset = dispatchEntry->xOffset;
yOffset = dispatchEntry->yOffset;
} else {
xOffset = 0.0f;
yOffset = 0.0f;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Publish the motion event and the first motion sample.
status = connection->inputPublisher.publishMotionEvent(motionEntry->deviceId,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
motionEntry->source, action, flags, motionEntry->edgeFlags, motionEntry->metaState,
Fix trackball down and movement bugs. Bug: 2823788 Change-Id: Icb0c392b58f7e735614460b5eb87439cb73ac4f2
2010-07-17 00:21:06 +00:00
xOffset, yOffset,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
motionEntry->xPrecision, motionEntry->yPrecision,
motionEntry->downTime, firstMotionSample->eventTime,
motionEntry->pointerCount, motionEntry->pointerIds,
firstMotionSample->pointerCoords);
if (status) {
LOGE("channel '%s' ~ Could not publish motion event, "
"status=%d", connection->getInputChannelName(), status);
abortDispatchCycleLocked(currentTime, connection, true /*broken*/);
return;
}
// Append additional motion samples.
MotionSample* nextMotionSample = firstMotionSample->next;
for (; nextMotionSample != NULL; nextMotionSample = nextMotionSample->next) {
status = connection->inputPublisher.appendMotionSample(
nextMotionSample->eventTime, nextMotionSample->pointerCoords);
if (status == NO_MEMORY) {
#if DEBUG_DISPATCH_CYCLE
LOGD("channel '%s' ~ Shared memory buffer full. Some motion samples will "
"be sent in the next dispatch cycle.",
connection->getInputChannelName());
#endif
break;
}
if (status != OK) {
LOGE("channel '%s' ~ Could not append motion sample "
"for a reason other than out of memory, status=%d",
connection->getInputChannelName(), status);
abortDispatchCycleLocked(currentTime, connection, true /*broken*/);
return;
}
}
// Remember the next motion sample that we could not dispatch, in case we ran out
// of space in the shared memory buffer.
dispatchEntry->tailMotionSample = nextMotionSample;
break;
}
default: {
assert(false);
}
}
// Send the dispatch signal.
status = connection->inputPublisher.sendDispatchSignal();
if (status) {
LOGE("channel '%s' ~ Could not send dispatch signal, status=%d",
connection->getInputChannelName(), status);
abortDispatchCycleLocked(currentTime, connection, true /*broken*/);
return;
}
// Record information about the newly started dispatch cycle.
connection->lastEventTime = dispatchEntry->eventEntry->eventTime;
connection->lastDispatchTime = currentTime;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
nsecs_t timeout = dispatchEntry->timeout - timeSpentWaitingForApplication;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
connection->setNextTimeoutTime(currentTime, timeout);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Notify other system components.
onDispatchCycleStartedLocked(currentTime, connection);
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
void InputDispatcher::finishDispatchCycleLocked(nsecs_t currentTime,
const sp<Connection>& connection) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#if DEBUG_DISPATCH_CYCLE
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
LOGD("channel '%s' ~ finishDispatchCycle - %01.1fms since event, "
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
"%01.1fms since dispatch",
connection->getInputChannelName(),
connection->getEventLatencyMillis(currentTime),
connection->getDispatchLatencyMillis(currentTime));
#endif
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
if (connection->status == Connection::STATUS_BROKEN
|| connection->status == Connection::STATUS_ZOMBIE) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return;
}
// Clear the pending timeout.
connection->nextTimeoutTime = LONG_LONG_MAX;
if (connection->status == Connection::STATUS_NOT_RESPONDING) {
// Recovering from an ANR.
connection->status = Connection::STATUS_NORMAL;
// Notify other system components.
onDispatchCycleFinishedLocked(currentTime, connection, true /*recoveredFromANR*/);
} else {
// Normal finish. Not much to do here.
// Notify other system components.
onDispatchCycleFinishedLocked(currentTime, connection, false /*recoveredFromANR*/);
}
// Reset the publisher since the event has been consumed.
// We do this now so that the publisher can release some of its internal resources
// while waiting for the next dispatch cycle to begin.
status_t status = connection->inputPublisher.reset();
if (status) {
LOGE("channel '%s' ~ Could not reset publisher, status=%d",
connection->getInputChannelName(), status);
abortDispatchCycleLocked(currentTime, connection, true /*broken*/);
return;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
startNextDispatchCycleLocked(currentTime, connection);
}
void InputDispatcher::startNextDispatchCycleLocked(nsecs_t currentTime,
const sp<Connection>& connection) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Start the next dispatch cycle for this connection.
while (! connection->outboundQueue.isEmpty()) {
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
DispatchEntry* dispatchEntry = connection->outboundQueue.headSentinel.next;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
if (dispatchEntry->inProgress) {
// Finish or resume current event in progress.
if (dispatchEntry->tailMotionSample) {
// We have a tail of undispatched motion samples.
// Reuse the same DispatchEntry and start a new cycle.
dispatchEntry->inProgress = false;
dispatchEntry->headMotionSample = dispatchEntry->tailMotionSample;
dispatchEntry->tailMotionSample = NULL;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
startDispatchCycleLocked(currentTime, connection, 0);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return;
}
// Finished.
connection->outboundQueue.dequeueAtHead();
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
if (dispatchEntry->isSyncTarget()) {
decrementPendingSyncDispatchesLocked(dispatchEntry->eventEntry);
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
mAllocator.releaseDispatchEntry(dispatchEntry);
} else {
// If the head is not in progress, then we must have already dequeued the in
// progress event, which means we actually aborted it (due to ANR).
// So just start the next event for this connection.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
startDispatchCycleLocked(currentTime, connection, 0);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return;
}
}
// Outbound queue is empty, deactivate the connection.
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
deactivateConnectionLocked(connection.get());
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
void InputDispatcher::timeoutDispatchCycleLocked(nsecs_t currentTime,
const sp<Connection>& connection) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#if DEBUG_DISPATCH_CYCLE
LOGD("channel '%s' ~ timeoutDispatchCycle",
connection->getInputChannelName());
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (connection->status == Connection::STATUS_NORMAL) {
// Enter the not responding state.
connection->status = Connection::STATUS_NOT_RESPONDING;
connection->lastANRTime = currentTime;
} else if (connection->status != Connection::STATUS_NOT_RESPONDING) {
// Connection is broken or dead.
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
return;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
// Notify other system components.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// This enqueues a command which will eventually call resumeAfterTimeoutDispatchCycleLocked.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
onDispatchCycleANRLocked(currentTime, connection);
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
void InputDispatcher::resumeAfterTimeoutDispatchCycleLocked(nsecs_t currentTime,
const sp<Connection>& connection, nsecs_t newTimeout) {
#if DEBUG_DISPATCH_CYCLE
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
LOGD("channel '%s' ~ resumeAfterTimeoutDispatchCycleLocked - newTimeout=%lld",
connection->getInputChannelName(), newTimeout);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
#endif
if (connection->status != Connection::STATUS_NOT_RESPONDING) {
return;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (newTimeout > 0) {
// The system has decided to give the application some more time.
// Keep waiting synchronously and resume normal dispatch.
connection->status = Connection::STATUS_NORMAL;
connection->setNextTimeoutTime(currentTime, newTimeout);
} else {
// The system is about to throw up an ANR dialog and has requested that we abort dispatch.
// Reset the timeout.
connection->nextTimeoutTime = LONG_LONG_MAX;
// Input state will no longer be realistic.
connection->inputState.setOutOfSync();
if (! connection->outboundQueue.isEmpty()) {
// Make the current pending dispatch asynchronous (if it isn't already) so that
// subsequent events can be delivered to the ANR dialog or to another application.
DispatchEntry* currentDispatchEntry = connection->outboundQueue.headSentinel.next;
currentDispatchEntry->preemptSyncTarget();
// Drain all but the first entry in the outbound queue. We keep the first entry
// since that is the one that dispatch is stuck on. We throw away the others
// so that we don't spam the application with stale messages if it eventually
// wakes up and recovers from the ANR.
drainOutboundQueueLocked(connection.get(), currentDispatchEntry->next);
}
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
}
void InputDispatcher::abortDispatchCycleLocked(nsecs_t currentTime,
const sp<Connection>& connection, bool broken) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#if DEBUG_DISPATCH_CYCLE
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
LOGD("channel '%s' ~ abortDispatchCycle - broken=%s",
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
connection->getInputChannelName(), toString(broken));
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#endif
// Clear the pending timeout.
connection->nextTimeoutTime = LONG_LONG_MAX;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Input state will no longer be realistic.
connection->inputState.setOutOfSync();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// Clear the outbound queue.
drainOutboundQueueLocked(connection.get(), connection->outboundQueue.headSentinel.next);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Handle the case where the connection appears to be unrecoverably broken.
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
// Ignore already broken or zombie connections.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
if (broken) {
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
if (connection->status == Connection::STATUS_NORMAL
|| connection->status == Connection::STATUS_NOT_RESPONDING) {
connection->status = Connection::STATUS_BROKEN;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
// Notify other system components.
onDispatchCycleBrokenLocked(currentTime, connection);
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::drainOutboundQueueLocked(Connection* connection,
DispatchEntry* firstDispatchEntryToDrain) {
for (DispatchEntry* dispatchEntry = firstDispatchEntryToDrain;
dispatchEntry != & connection->outboundQueue.tailSentinel;) {
DispatchEntry* next = dispatchEntry->next;
connection->outboundQueue.dequeue(dispatchEntry);
if (dispatchEntry->isSyncTarget()) {
decrementPendingSyncDispatchesLocked(dispatchEntry->eventEntry);
}
mAllocator.releaseDispatchEntry(dispatchEntry);
dispatchEntry = next;
}
if (connection->outboundQueue.isEmpty()) {
deactivateConnectionLocked(connection);
}
}
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
int InputDispatcher::handleReceiveCallback(int receiveFd, int events, void* data) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
InputDispatcher* d = static_cast<InputDispatcher*>(data);
{ // acquire lock
AutoMutex _l(d->mLock);
ssize_t connectionIndex = d->mConnectionsByReceiveFd.indexOfKey(receiveFd);
if (connectionIndex < 0) {
LOGE("Received spurious receive callback for unknown input channel. "
"fd=%d, events=0x%x", receiveFd, events);
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
return 0; // remove the callback
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
nsecs_t currentTime = now();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
sp<Connection> connection = d->mConnectionsByReceiveFd.valueAt(connectionIndex);
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
if (events & (ALOOPER_EVENT_ERROR | ALOOPER_EVENT_HANGUP)) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
LOGE("channel '%s' ~ Consumer closed input channel or an error occurred. "
"events=0x%x", connection->getInputChannelName(), events);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
d->abortDispatchCycleLocked(currentTime, connection, true /*broken*/);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
d->runCommandsLockedInterruptible();
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
return 0; // remove the callback
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
if (! (events & ALOOPER_EVENT_INPUT)) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
LOGW("channel '%s' ~ Received spurious callback for unhandled poll event. "
"events=0x%x", connection->getInputChannelName(), events);
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
return 1;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
status_t status = connection->inputPublisher.receiveFinishedSignal();
if (status) {
LOGE("channel '%s' ~ Failed to receive finished signal. status=%d",
connection->getInputChannelName(), status);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
d->abortDispatchCycleLocked(currentTime, connection, true /*broken*/);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
d->runCommandsLockedInterruptible();
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
return 0; // remove the callback
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
d->finishDispatchCycleLocked(currentTime, connection);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
d->runCommandsLockedInterruptible();
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
return 1;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
} // release lock
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void InputDispatcher::notifyConfigurationChanged(nsecs_t eventTime) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#if DEBUG_INBOUND_EVENT_DETAILS
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
LOGD("notifyConfigurationChanged - eventTime=%lld", eventTime);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
#endif
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
bool needWake;
{ // acquire lock
AutoMutex _l(mLock);
ConfigurationChangedEntry* newEntry = mAllocator.obtainConfigurationChangedEntry(eventTime);
needWake = enqueueInboundEventLocked(newEntry);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
} // release lock
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (needWake) {
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->wake();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
void InputDispatcher::notifyKey(nsecs_t eventTime, int32_t deviceId, int32_t source,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
uint32_t policyFlags, int32_t action, int32_t flags,
int32_t keyCode, int32_t scanCode, int32_t metaState, nsecs_t downTime) {
#if DEBUG_INBOUND_EVENT_DETAILS
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
LOGD("notifyKey - eventTime=%lld, deviceId=0x%x, source=0x%x, policyFlags=0x%x, action=0x%x, "
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
"flags=0x%x, keyCode=0x%x, scanCode=0x%x, metaState=0x%x, downTime=%lld",
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
eventTime, deviceId, source, policyFlags, action, flags,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
keyCode, scanCode, metaState, downTime);
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
bool needWake;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
{ // acquire lock
AutoMutex _l(mLock);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
int32_t repeatCount = 0;
KeyEntry* newEntry = mAllocator.obtainKeyEntry(eventTime,
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
deviceId, source, policyFlags, action, flags, keyCode, scanCode,
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
metaState, repeatCount, downTime);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
needWake = enqueueInboundEventLocked(newEntry);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
} // release lock
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (needWake) {
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->wake();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
void InputDispatcher::notifyMotion(nsecs_t eventTime, int32_t deviceId, int32_t source,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
uint32_t policyFlags, int32_t action, int32_t flags, int32_t metaState, int32_t edgeFlags,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
uint32_t pointerCount, const int32_t* pointerIds, const PointerCoords* pointerCoords,
float xPrecision, float yPrecision, nsecs_t downTime) {
#if DEBUG_INBOUND_EVENT_DETAILS
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
LOGD("notifyMotion - eventTime=%lld, deviceId=0x%x, source=0x%x, policyFlags=0x%x, "
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
"action=0x%x, flags=0x%x, metaState=0x%x, edgeFlags=0x%x, "
"xPrecision=%f, yPrecision=%f, downTime=%lld",
eventTime, deviceId, source, policyFlags, action, flags, metaState, edgeFlags,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
xPrecision, yPrecision, downTime);
for (uint32_t i = 0; i < pointerCount; i++) {
Input device calibration and capabilities. Finished the input device capability API. Added a mechanism for calibrating touch devices to obtain more accurate information about the touch contact area. Improved pointer location to show new coordinates and capabilities. Optimized pointer location display and formatting to avoid allocating large numbers of temporary objects. The GC churn was causing the application to stutter very badly when more than a couple of fingers were down). Added more diagnostics. Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
2010-08-30 10:02:23 +00:00
LOGD(" Pointer %d: id=%d, x=%f, y=%f, pressure=%f, size=%f, "
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
"touchMajor=%f, touchMinor=%f, toolMajor=%f, toolMinor=%f, "
Input device calibration and capabilities. Finished the input device capability API. Added a mechanism for calibrating touch devices to obtain more accurate information about the touch contact area. Improved pointer location to show new coordinates and capabilities. Optimized pointer location display and formatting to avoid allocating large numbers of temporary objects. The GC churn was causing the application to stutter very badly when more than a couple of fingers were down). Added more diagnostics. Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
2010-08-30 10:02:23 +00:00
"orientation=%f",
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
i, pointerIds[i], pointerCoords[i].x, pointerCoords[i].y,
Input device calibration and capabilities. Finished the input device capability API. Added a mechanism for calibrating touch devices to obtain more accurate information about the touch contact area. Improved pointer location to show new coordinates and capabilities. Optimized pointer location display and formatting to avoid allocating large numbers of temporary objects. The GC churn was causing the application to stutter very badly when more than a couple of fingers were down). Added more diagnostics. Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
2010-08-30 10:02:23 +00:00
pointerCoords[i].pressure, pointerCoords[i].size,
pointerCoords[i].touchMajor, pointerCoords[i].touchMinor,
pointerCoords[i].toolMajor, pointerCoords[i].toolMinor,
pointerCoords[i].orientation);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
bool needWake;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
{ // acquire lock
AutoMutex _l(mLock);
// Attempt batching and streaming of move events.
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
if (action == AMOTION_EVENT_ACTION_MOVE) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// BATCHING CASE
//
// Try to append a move sample to the tail of the inbound queue for this device.
// Give up if we encounter a non-move motion event for this device since that
// means we cannot append any new samples until a new motion event has started.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
for (EventEntry* entry = mInboundQueue.tailSentinel.prev;
entry != & mInboundQueue.headSentinel; entry = entry->prev) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
if (entry->type != EventEntry::TYPE_MOTION) {
// Keep looking for motion events.
continue;
}
MotionEntry* motionEntry = static_cast<MotionEntry*>(entry);
if (motionEntry->deviceId != deviceId) {
// Keep looking for this device.
continue;
}
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
if (motionEntry->action != AMOTION_EVENT_ACTION_MOVE
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
|| motionEntry->pointerCount != pointerCount
|| motionEntry->isInjected()) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Last motion event in the queue for this device is not compatible for
// appending new samples. Stop here.
goto NoBatchingOrStreaming;
}
// The last motion event is a move and is compatible for appending.
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
// Do the batching magic.
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
mAllocator.appendMotionSample(motionEntry, eventTime, pointerCoords);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#if DEBUG_BATCHING
LOGD("Appended motion sample onto batch for most recent "
"motion event for this device in the inbound queue.");
#endif
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
return; // done!
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
// STREAMING CASE
//
// There is no pending motion event (of any kind) for this device in the inbound queue.
// Search the outbound queues for a synchronously dispatched motion event for this
// device. If found, then we append the new sample to that event and then try to
// push it out to all current targets. It is possible that some targets will already
// have consumed the motion event. This case is automatically handled by the
// logic in prepareDispatchCycleLocked by tracking where resumption takes place.
//
// The reason we look for a synchronously dispatched motion event is because we
// want to be sure that no other motion events have been dispatched since the move.
// It's also convenient because it means that the input targets are still valid.
// This code could be improved to support streaming of asynchronously dispatched
// motion events (which might be significantly more efficient) but it may become
// a little more complicated as a result.
//
// Note: This code crucially depends on the invariant that an outbound queue always
// contains at most one synchronous event and it is always last (but it might
// not be first!).
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
if (mCurrentInputTargetsValid) {
for (size_t i = 0; i < mActiveConnections.size(); i++) {
Connection* connection = mActiveConnections.itemAt(i);
if (! connection->outboundQueue.isEmpty()) {
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
DispatchEntry* dispatchEntry = connection->outboundQueue.tailSentinel.prev;
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
if (dispatchEntry->isSyncTarget()) {
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
if (dispatchEntry->eventEntry->type != EventEntry::TYPE_MOTION) {
goto NoBatchingOrStreaming;
}
MotionEntry* syncedMotionEntry = static_cast<MotionEntry*>(
dispatchEntry->eventEntry);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
if (syncedMotionEntry->action != AMOTION_EVENT_ACTION_MOVE
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
|| syncedMotionEntry->deviceId != deviceId
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
|| syncedMotionEntry->pointerCount != pointerCount
|| syncedMotionEntry->isInjected()) {
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
goto NoBatchingOrStreaming;
}
// Found synced move entry. Append sample and resume dispatch.
mAllocator.appendMotionSample(syncedMotionEntry, eventTime,
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
pointerCoords);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
#if DEBUG_BATCHING
LOGD("Appended motion sample onto batch for most recent synchronously "
"dispatched motion event for this device in the outbound queues.");
#endif
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
nsecs_t currentTime = now();
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
dispatchEventToCurrentInputTargetsLocked(currentTime, syncedMotionEntry,
true /*resumeWithAppendedMotionSample*/);
runCommandsLockedInterruptible();
return; // done!
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
}
}
NoBatchingOrStreaming:;
}
// Just enqueue a new motion event.
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
MotionEntry* newEntry = mAllocator.obtainMotionEntry(eventTime,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
deviceId, source, policyFlags, action, flags, metaState, edgeFlags,
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
xPrecision, yPrecision, downTime,
pointerCount, pointerIds, pointerCoords);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
needWake = enqueueInboundEventLocked(newEntry);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
} // release lock
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (needWake) {
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->wake();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
int32_t InputDispatcher::injectInputEvent(const InputEvent* event,
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
int32_t injectorPid, int32_t injectorUid, int32_t syncMode, int32_t timeoutMillis) {
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
#if DEBUG_INBOUND_EVENT_DETAILS
LOGD("injectInputEvent - eventType=%d, injectorPid=%d, injectorUid=%d, "
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
"syncMode=%d, timeoutMillis=%d",
event->getType(), injectorPid, injectorUid, syncMode, timeoutMillis);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
#endif
nsecs_t endTime = now() + milliseconds_to_nanoseconds(timeoutMillis);
EventEntry* injectedEntry;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
bool needWake;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
{ // acquire lock
AutoMutex _l(mLock);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
injectedEntry = createEntryFromInjectedInputEventLocked(event);
if (! injectedEntry) {
return INPUT_EVENT_INJECTION_FAILED;
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
injectedEntry->refCount += 1;
injectedEntry->injectorPid = injectorPid;
injectedEntry->injectorUid = injectorUid;
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
if (syncMode == INPUT_EVENT_INJECTION_SYNC_NONE) {
injectedEntry->injectionIsAsync = true;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
needWake = enqueueInboundEventLocked(injectedEntry);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
} // release lock
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (needWake) {
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->wake();
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
}
int32_t injectionResult;
{ // acquire lock
AutoMutex _l(mLock);
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
if (syncMode == INPUT_EVENT_INJECTION_SYNC_NONE) {
injectionResult = INPUT_EVENT_INJECTION_SUCCEEDED;
} else {
for (;;) {
injectionResult = injectedEntry->injectionResult;
if (injectionResult != INPUT_EVENT_INJECTION_PENDING) {
break;
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
nsecs_t remainingTimeout = endTime - now();
if (remainingTimeout <= 0) {
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
#if DEBUG_INJECTION
LOGD("injectInputEvent - Timed out waiting for injection result "
"to become available.");
#endif
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
injectionResult = INPUT_EVENT_INJECTION_TIMED_OUT;
break;
}
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
mInjectionResultAvailableCondition.waitRelative(mLock, remainingTimeout);
}
if (injectionResult == INPUT_EVENT_INJECTION_SUCCEEDED
&& syncMode == INPUT_EVENT_INJECTION_SYNC_WAIT_FOR_FINISHED) {
while (injectedEntry->pendingSyncDispatches != 0) {
#if DEBUG_INJECTION
LOGD("injectInputEvent - Waiting for %d pending synchronous dispatches.",
injectedEntry->pendingSyncDispatches);
#endif
nsecs_t remainingTimeout = endTime - now();
if (remainingTimeout <= 0) {
#if DEBUG_INJECTION
LOGD("injectInputEvent - Timed out waiting for pending synchronous "
"dispatches to finish.");
#endif
injectionResult = INPUT_EVENT_INJECTION_TIMED_OUT;
break;
}
mInjectionSyncFinishedCondition.waitRelative(mLock, remainingTimeout);
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
}
}
mAllocator.releaseEventEntry(injectedEntry);
} // release lock
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
#if DEBUG_INJECTION
LOGD("injectInputEvent - Finished with result %d. "
"injectorPid=%d, injectorUid=%d",
injectionResult, injectorPid, injectorUid);
#endif
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
return injectionResult;
}
void InputDispatcher::setInjectionResultLocked(EventEntry* entry, int32_t injectionResult) {
if (entry->isInjected()) {
#if DEBUG_INJECTION
LOGD("Setting input event injection result to %d. "
"injectorPid=%d, injectorUid=%d",
injectionResult, entry->injectorPid, entry->injectorUid);
#endif
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
if (entry->injectionIsAsync) {
// Log the outcome since the injector did not wait for the injection result.
switch (injectionResult) {
case INPUT_EVENT_INJECTION_SUCCEEDED:
LOGV("Asynchronous input event injection succeeded.");
break;
case INPUT_EVENT_INJECTION_FAILED:
LOGW("Asynchronous input event injection failed.");
break;
case INPUT_EVENT_INJECTION_PERMISSION_DENIED:
LOGW("Asynchronous input event injection permission denied.");
break;
case INPUT_EVENT_INJECTION_TIMED_OUT:
LOGW("Asynchronous input event injection timed out.");
break;
}
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
entry->injectionResult = injectionResult;
mInjectionResultAvailableCondition.broadcast();
}
}
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
void InputDispatcher::decrementPendingSyncDispatchesLocked(EventEntry* entry) {
entry->pendingSyncDispatches -= 1;
if (entry->isInjected() && entry->pendingSyncDispatches == 0) {
mInjectionSyncFinishedCondition.broadcast();
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
static bool isValidKeyAction(int32_t action) {
switch (action) {
case AKEY_EVENT_ACTION_DOWN:
case AKEY_EVENT_ACTION_UP:
return true;
default:
return false;
}
}
static bool isValidMotionAction(int32_t action) {
switch (action & AMOTION_EVENT_ACTION_MASK) {
case AMOTION_EVENT_ACTION_DOWN:
case AMOTION_EVENT_ACTION_UP:
case AMOTION_EVENT_ACTION_CANCEL:
case AMOTION_EVENT_ACTION_MOVE:
case AMOTION_EVENT_ACTION_POINTER_DOWN:
case AMOTION_EVENT_ACTION_POINTER_UP:
case AMOTION_EVENT_ACTION_OUTSIDE:
return true;
default:
return false;
}
}
InputDispatcher::EventEntry* InputDispatcher::createEntryFromInjectedInputEventLocked(
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
const InputEvent* event) {
switch (event->getType()) {
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
case AINPUT_EVENT_TYPE_KEY: {
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
const KeyEvent* keyEvent = static_cast<const KeyEvent*>(event);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (! isValidKeyAction(keyEvent->getAction())) {
LOGE("Dropping injected key event since it has invalid action code 0x%x",
keyEvent->getAction());
return NULL;
}
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
uint32_t policyFlags = POLICY_FLAG_INJECTED;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
KeyEntry* keyEntry = mAllocator.obtainKeyEntry(keyEvent->getEventTime(),
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
keyEvent->getDeviceId(), keyEvent->getSource(), policyFlags,
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
keyEvent->getAction(), keyEvent->getFlags(),
keyEvent->getKeyCode(), keyEvent->getScanCode(), keyEvent->getMetaState(),
keyEvent->getRepeatCount(), keyEvent->getDownTime());
return keyEntry;
}
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
case AINPUT_EVENT_TYPE_MOTION: {
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
const MotionEvent* motionEvent = static_cast<const MotionEvent*>(event);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (! isValidMotionAction(motionEvent->getAction())) {
LOGE("Dropping injected motion event since it has invalid action code 0x%x.",
motionEvent->getAction());
return NULL;
}
if (motionEvent->getPointerCount() == 0
|| motionEvent->getPointerCount() > MAX_POINTERS) {
LOGE("Dropping injected motion event since it has an invalid pointer count %d.",
motionEvent->getPointerCount());
}
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
uint32_t policyFlags = POLICY_FLAG_INJECTED;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
const nsecs_t* sampleEventTimes = motionEvent->getSampleEventTimes();
const PointerCoords* samplePointerCoords = motionEvent->getSamplePointerCoords();
size_t pointerCount = motionEvent->getPointerCount();
MotionEntry* motionEntry = mAllocator.obtainMotionEntry(*sampleEventTimes,
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
motionEvent->getDeviceId(), motionEvent->getSource(), policyFlags,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
motionEvent->getAction(), motionEvent->getFlags(),
motionEvent->getMetaState(), motionEvent->getEdgeFlags(),
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
motionEvent->getXPrecision(), motionEvent->getYPrecision(),
motionEvent->getDownTime(), uint32_t(pointerCount),
motionEvent->getPointerIds(), samplePointerCoords);
for (size_t i = motionEvent->getHistorySize(); i > 0; i--) {
sampleEventTimes += 1;
samplePointerCoords += pointerCount;
mAllocator.appendMotionSample(motionEntry, *sampleEventTimes, samplePointerCoords);
}
return motionEntry;
}
default:
assert(false);
return NULL;
}
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::setInputWindows(const Vector<InputWindow>& inputWindows) {
#if DEBUG_FOCUS
LOGD("setInputWindows");
#endif
{ // acquire lock
AutoMutex _l(mLock);
sp<InputChannel> touchedWindowChannel;
if (mTouchedWindow) {
touchedWindowChannel = mTouchedWindow->inputChannel;
mTouchedWindow = NULL;
}
size_t numTouchedWallpapers = mTouchedWallpaperWindows.size();
if (numTouchedWallpapers != 0) {
for (size_t i = 0; i < numTouchedWallpapers; i++) {
mTempTouchedWallpaperChannels.push(mTouchedWallpaperWindows[i]->inputChannel);
}
mTouchedWallpaperWindows.clear();
}
bool hadFocusedWindow = mFocusedWindow != NULL;
mFocusedWindow = NULL;
mWallpaperWindows.clear();
mWindows.clear();
mWindows.appendVector(inputWindows);
size_t numWindows = mWindows.size();
for (size_t i = 0; i < numWindows; i++) {
InputWindow* window = & mWindows.editItemAt(i);
if (window->hasFocus) {
mFocusedWindow = window;
}
if (window->layoutParamsType == InputWindow::TYPE_WALLPAPER) {
mWallpaperWindows.push(window);
for (size_t j = 0; j < numTouchedWallpapers; j++) {
if (window->inputChannel == mTempTouchedWallpaperChannels[i]) {
mTouchedWallpaperWindows.push(window);
}
}
}
if (window->inputChannel == touchedWindowChannel) {
mTouchedWindow = window;
}
}
mTempTouchedWallpaperChannels.clear();
if ((hadFocusedWindow && ! mFocusedWindow)
|| (mFocusedWindow && ! mFocusedWindow->visible)) {
preemptInputDispatchInnerLocked();
}
#if DEBUG_FOCUS
logDispatchStateLocked();
#endif
} // release lock
// Wake up poll loop since it may need to make new input dispatching choices.
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->wake();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
}
void InputDispatcher::setFocusedApplication(const InputApplication* inputApplication) {
#if DEBUG_FOCUS
LOGD("setFocusedApplication");
#endif
{ // acquire lock
AutoMutex _l(mLock);
releaseFocusedApplicationLocked();
if (inputApplication) {
mFocusedApplicationStorage = *inputApplication;
mFocusedApplication = & mFocusedApplicationStorage;
}
#if DEBUG_FOCUS
logDispatchStateLocked();
#endif
} // release lock
// Wake up poll loop since it may need to make new input dispatching choices.
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->wake();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
}
void InputDispatcher::releaseFocusedApplicationLocked() {
if (mFocusedApplication) {
mFocusedApplication = NULL;
mFocusedApplicationStorage.handle.clear();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::setInputDispatchMode(bool enabled, bool frozen) {
#if DEBUG_FOCUS
LOGD("setInputDispatchMode: enabled=%d, frozen=%d", enabled, frozen);
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
#endif
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
bool changed;
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
{ // acquire lock
AutoMutex _l(mLock);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (mDispatchEnabled != enabled || mDispatchFrozen != frozen) {
if (mDispatchFrozen && ! frozen) {
resetANRTimeoutsLocked();
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
mDispatchEnabled = enabled;
mDispatchFrozen = frozen;
changed = true;
} else {
changed = false;
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
#if DEBUG_FOCUS
logDispatchStateLocked();
#endif
} // release lock
if (changed) {
// Wake up poll loop since it may need to make new input dispatching choices.
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->wake();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
}
}
void InputDispatcher::preemptInputDispatch() {
#if DEBUG_FOCUS
LOGD("preemptInputDispatch");
#endif
bool preemptedOne;
{ // acquire lock
AutoMutex _l(mLock);
preemptedOne = preemptInputDispatchInnerLocked();
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
} // release lock
if (preemptedOne) {
// Wake up the poll loop so it can get a head start dispatching the next event.
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->wake();
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
}
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
bool InputDispatcher::preemptInputDispatchInnerLocked() {
bool preemptedOne = false;
for (size_t i = 0; i < mActiveConnections.size(); i++) {
Connection* connection = mActiveConnections[i];
if (connection->hasPendingSyncTarget()) {
#if DEBUG_DISPATCH_CYCLE
LOGD("channel '%s' ~ Preempted pending synchronous dispatch",
connection->getInputChannelName());
#endif
connection->preemptSyncTarget();
preemptedOne = true;
}
}
return preemptedOne;
}
void InputDispatcher::logDispatchStateLocked() {
String8 dump;
dumpDispatchStateLocked(dump);
LOGD("%s", dump.string());
}
void InputDispatcher::dumpDispatchStateLocked(String8& dump) {
dump.appendFormat(" dispatchEnabled: %d\n", mDispatchEnabled);
dump.appendFormat(" dispatchFrozen: %d\n", mDispatchFrozen);
if (mFocusedApplication) {
dump.appendFormat(" focusedApplication: name='%s', dispatchingTimeout=%0.3fms\n",
mFocusedApplication->name.string(),
mFocusedApplication->dispatchingTimeout / 1000000.0);
} else {
dump.append(" focusedApplication: <null>\n");
}
dump.appendFormat(" focusedWindow: '%s'\n",
mFocusedWindow != NULL ? mFocusedWindow->inputChannel->getName().string() : "<null>");
dump.appendFormat(" touchedWindow: '%s', touchDown=%d\n",
mTouchedWindow != NULL ? mTouchedWindow->inputChannel->getName().string() : "<null>",
mTouchDown);
for (size_t i = 0; i < mTouchedWallpaperWindows.size(); i++) {
dump.appendFormat(" touchedWallpaperWindows[%d]: '%s'\n",
i, mTouchedWallpaperWindows[i]->inputChannel->getName().string());
}
for (size_t i = 0; i < mWindows.size(); i++) {
dump.appendFormat(" windows[%d]: '%s', paused=%s, hasFocus=%s, hasWallpaper=%s, "
"visible=%s, flags=0x%08x, type=0x%08x, "
"frame=[%d,%d][%d,%d], "
"visibleFrame=[%d,%d][%d,%d], "
"touchableArea=[%d,%d][%d,%d], "
"ownerPid=%d, ownerUid=%d, dispatchingTimeout=%0.3fms\n",
i, mWindows[i].inputChannel->getName().string(),
toString(mWindows[i].paused),
toString(mWindows[i].hasFocus),
toString(mWindows[i].hasWallpaper),
toString(mWindows[i].visible),
mWindows[i].layoutParamsFlags, mWindows[i].layoutParamsType,
mWindows[i].frameLeft, mWindows[i].frameTop,
mWindows[i].frameRight, mWindows[i].frameBottom,
mWindows[i].visibleFrameLeft, mWindows[i].visibleFrameTop,
mWindows[i].visibleFrameRight, mWindows[i].visibleFrameBottom,
mWindows[i].touchableAreaLeft, mWindows[i].touchableAreaTop,
mWindows[i].touchableAreaRight, mWindows[i].touchableAreaBottom,
mWindows[i].ownerPid, mWindows[i].ownerUid,
mWindows[i].dispatchingTimeout / 1000000.0);
}
for (size_t i = 0; i < mMonitoringChannels.size(); i++) {
const sp<InputChannel>& channel = mMonitoringChannels[i];
dump.appendFormat(" monitoringChannel[%d]: '%s'\n",
i, channel->getName().string());
}
for (size_t i = 0; i < mActiveConnections.size(); i++) {
const Connection* connection = mActiveConnections[i];
dump.appendFormat(" activeConnection[%d]: '%s', status=%s, hasPendingSyncTarget=%s, "
"inputState.isNeutral=%s, inputState.isOutOfSync=%s\n",
i, connection->getInputChannelName(), connection->getStatusLabel(),
toString(connection->hasPendingSyncTarget()),
toString(connection->inputState.isNeutral()),
toString(connection->inputState.isOutOfSync()));
}
if (isAppSwitchPendingLocked()) {
dump.appendFormat(" appSwitch: pending, due in %01.1fms\n",
(mAppSwitchDueTime - now()) / 1000000.0);
} else {
dump.append(" appSwitch: not pending\n");
}
}
status_t InputDispatcher::registerInputChannel(const sp<InputChannel>& inputChannel, bool monitor) {
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
#if DEBUG_REGISTRATION
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
LOGD("channel '%s' ~ registerInputChannel - monitor=%s", inputChannel->getName().string(),
toString(monitor));
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
#endif
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
{ // acquire lock
AutoMutex _l(mLock);
Fix possible race conditions during channel unregistration. Previously, the input dispatcher assumed that the input channel's receive pipe file descriptor was a sufficiently unique identifier for looking up input channels in its various tables. However, it can happen that an input channel is disposed and then a new input channel is immediately created that reuses the same file descriptor. Ordinarily this is not a problem, however there is a small opportunity for a race to arise in InputQueue. When InputQueue receives an input event from the dispatcher, it generates a finishedToken that encodes the channel's receive pipe fd, and a sequence number. The finishedToken is used by the ViewRoot as a handle for the event so that it can tell the InputQueue when the event has finished being processed. Here is the race: 1. InputQueue receives an input event, assigns a new finishedToken. 2. ViewRoot begins processing the input event. 3. During processing, ViewRoot unregisters the InputChannel. 4. A new InputChannel is created and is registered with the Input Queue. This InputChannel happens to have the same receive pipe fd as the one previously registered. 5. ViewRoot tells the InputQueue that it has finished processing the input event, passing along the original finishedToken. 6. InputQueue throws an exception because the finishedToken's receive pipe fd is registered but the sequence number is incorrect so it assumes that the client has called finish spuriously. The fix is to include a unique connection id within the finishedToken so that the InputQueue can accurately confirm that the token belongs to the currently registered InputChannel rather than to an old one that happened to have the same receive pipe fd. When it notices this, it ignores the spurious finish. I've also made a couple of other small changes to avoid similar races elsewhere. This patch set also includes a fix to synthesize a finished signal when the input channel is unregistered on the client side to help keep the server and client in sync. Bug: 2834068 Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
2010-08-17 22:59:26 +00:00
if (getConnectionIndex(inputChannel) >= 0) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
LOGW("Attempted to register already registered input channel '%s'",
inputChannel->getName().string());
return BAD_VALUE;
}
sp<Connection> connection = new Connection(inputChannel);
status_t status = connection->initialize();
if (status) {
LOGE("Failed to initialize input publisher for input channel '%s', status=%d",
inputChannel->getName().string(), status);
return status;
}
Fix possible race conditions during channel unregistration. Previously, the input dispatcher assumed that the input channel's receive pipe file descriptor was a sufficiently unique identifier for looking up input channels in its various tables. However, it can happen that an input channel is disposed and then a new input channel is immediately created that reuses the same file descriptor. Ordinarily this is not a problem, however there is a small opportunity for a race to arise in InputQueue. When InputQueue receives an input event from the dispatcher, it generates a finishedToken that encodes the channel's receive pipe fd, and a sequence number. The finishedToken is used by the ViewRoot as a handle for the event so that it can tell the InputQueue when the event has finished being processed. Here is the race: 1. InputQueue receives an input event, assigns a new finishedToken. 2. ViewRoot begins processing the input event. 3. During processing, ViewRoot unregisters the InputChannel. 4. A new InputChannel is created and is registered with the Input Queue. This InputChannel happens to have the same receive pipe fd as the one previously registered. 5. ViewRoot tells the InputQueue that it has finished processing the input event, passing along the original finishedToken. 6. InputQueue throws an exception because the finishedToken's receive pipe fd is registered but the sequence number is incorrect so it assumes that the client has called finish spuriously. The fix is to include a unique connection id within the finishedToken so that the InputQueue can accurately confirm that the token belongs to the currently registered InputChannel rather than to an old one that happened to have the same receive pipe fd. When it notices this, it ignores the spurious finish. I've also made a couple of other small changes to avoid similar races elsewhere. This patch set also includes a fix to synthesize a finished signal when the input channel is unregistered on the client side to help keep the server and client in sync. Bug: 2834068 Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
2010-08-17 22:59:26 +00:00
int32_t receiveFd = inputChannel->getReceivePipeFd();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
mConnectionsByReceiveFd.add(receiveFd, connection);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
if (monitor) {
mMonitoringChannels.push(inputChannel);
}
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->addFd(receiveFd, 0, ALOOPER_EVENT_INPUT, handleReceiveCallback, this);
Fix possible race conditions during channel unregistration. Previously, the input dispatcher assumed that the input channel's receive pipe file descriptor was a sufficiently unique identifier for looking up input channels in its various tables. However, it can happen that an input channel is disposed and then a new input channel is immediately created that reuses the same file descriptor. Ordinarily this is not a problem, however there is a small opportunity for a race to arise in InputQueue. When InputQueue receives an input event from the dispatcher, it generates a finishedToken that encodes the channel's receive pipe fd, and a sequence number. The finishedToken is used by the ViewRoot as a handle for the event so that it can tell the InputQueue when the event has finished being processed. Here is the race: 1. InputQueue receives an input event, assigns a new finishedToken. 2. ViewRoot begins processing the input event. 3. During processing, ViewRoot unregisters the InputChannel. 4. A new InputChannel is created and is registered with the Input Queue. This InputChannel happens to have the same receive pipe fd as the one previously registered. 5. ViewRoot tells the InputQueue that it has finished processing the input event, passing along the original finishedToken. 6. InputQueue throws an exception because the finishedToken's receive pipe fd is registered but the sequence number is incorrect so it assumes that the client has called finish spuriously. The fix is to include a unique connection id within the finishedToken so that the InputQueue can accurately confirm that the token belongs to the currently registered InputChannel rather than to an old one that happened to have the same receive pipe fd. When it notices this, it ignores the spurious finish. I've also made a couple of other small changes to avoid similar races elsewhere. This patch set also includes a fix to synthesize a finished signal when the input channel is unregistered on the client side to help keep the server and client in sync. Bug: 2834068 Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
2010-08-17 22:59:26 +00:00
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
runCommandsLockedInterruptible();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
} // release lock
return OK;
}
status_t InputDispatcher::unregisterInputChannel(const sp<InputChannel>& inputChannel) {
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
#if DEBUG_REGISTRATION
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 08:27:15 +00:00
LOGD("channel '%s' ~ unregisterInputChannel", inputChannel->getName().string());
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
#endif
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
{ // acquire lock
AutoMutex _l(mLock);
Fix possible race conditions during channel unregistration. Previously, the input dispatcher assumed that the input channel's receive pipe file descriptor was a sufficiently unique identifier for looking up input channels in its various tables. However, it can happen that an input channel is disposed and then a new input channel is immediately created that reuses the same file descriptor. Ordinarily this is not a problem, however there is a small opportunity for a race to arise in InputQueue. When InputQueue receives an input event from the dispatcher, it generates a finishedToken that encodes the channel's receive pipe fd, and a sequence number. The finishedToken is used by the ViewRoot as a handle for the event so that it can tell the InputQueue when the event has finished being processed. Here is the race: 1. InputQueue receives an input event, assigns a new finishedToken. 2. ViewRoot begins processing the input event. 3. During processing, ViewRoot unregisters the InputChannel. 4. A new InputChannel is created and is registered with the Input Queue. This InputChannel happens to have the same receive pipe fd as the one previously registered. 5. ViewRoot tells the InputQueue that it has finished processing the input event, passing along the original finishedToken. 6. InputQueue throws an exception because the finishedToken's receive pipe fd is registered but the sequence number is incorrect so it assumes that the client has called finish spuriously. The fix is to include a unique connection id within the finishedToken so that the InputQueue can accurately confirm that the token belongs to the currently registered InputChannel rather than to an old one that happened to have the same receive pipe fd. When it notices this, it ignores the spurious finish. I've also made a couple of other small changes to avoid similar races elsewhere. This patch set also includes a fix to synthesize a finished signal when the input channel is unregistered on the client side to help keep the server and client in sync. Bug: 2834068 Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
2010-08-17 22:59:26 +00:00
ssize_t connectionIndex = getConnectionIndex(inputChannel);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
if (connectionIndex < 0) {
LOGW("Attempted to unregister already unregistered input channel '%s'",
inputChannel->getName().string());
return BAD_VALUE;
}
sp<Connection> connection = mConnectionsByReceiveFd.valueAt(connectionIndex);
mConnectionsByReceiveFd.removeItemsAt(connectionIndex);
connection->status = Connection::STATUS_ZOMBIE;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
for (size_t i = 0; i < mMonitoringChannels.size(); i++) {
if (mMonitoringChannels[i] == inputChannel) {
mMonitoringChannels.removeAt(i);
break;
}
}
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->removeFd(inputChannel->getReceivePipeFd());
Fix possible race conditions during channel unregistration. Previously, the input dispatcher assumed that the input channel's receive pipe file descriptor was a sufficiently unique identifier for looking up input channels in its various tables. However, it can happen that an input channel is disposed and then a new input channel is immediately created that reuses the same file descriptor. Ordinarily this is not a problem, however there is a small opportunity for a race to arise in InputQueue. When InputQueue receives an input event from the dispatcher, it generates a finishedToken that encodes the channel's receive pipe fd, and a sequence number. The finishedToken is used by the ViewRoot as a handle for the event so that it can tell the InputQueue when the event has finished being processed. Here is the race: 1. InputQueue receives an input event, assigns a new finishedToken. 2. ViewRoot begins processing the input event. 3. During processing, ViewRoot unregisters the InputChannel. 4. A new InputChannel is created and is registered with the Input Queue. This InputChannel happens to have the same receive pipe fd as the one previously registered. 5. ViewRoot tells the InputQueue that it has finished processing the input event, passing along the original finishedToken. 6. InputQueue throws an exception because the finishedToken's receive pipe fd is registered but the sequence number is incorrect so it assumes that the client has called finish spuriously. The fix is to include a unique connection id within the finishedToken so that the InputQueue can accurately confirm that the token belongs to the currently registered InputChannel rather than to an old one that happened to have the same receive pipe fd. When it notices this, it ignores the spurious finish. I've also made a couple of other small changes to avoid similar races elsewhere. This patch set also includes a fix to synthesize a finished signal when the input channel is unregistered on the client side to help keep the server and client in sync. Bug: 2834068 Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
2010-08-17 22:59:26 +00:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
nsecs_t currentTime = now();
abortDispatchCycleLocked(currentTime, connection, true /*broken*/);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
runCommandsLockedInterruptible();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
} // release lock
// Wake the poll loop because removing the connection may have changed the current
// synchronization state.
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-14 06:17:30 +00:00
mLooper->wake();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return OK;
}
Fix possible race conditions during channel unregistration. Previously, the input dispatcher assumed that the input channel's receive pipe file descriptor was a sufficiently unique identifier for looking up input channels in its various tables. However, it can happen that an input channel is disposed and then a new input channel is immediately created that reuses the same file descriptor. Ordinarily this is not a problem, however there is a small opportunity for a race to arise in InputQueue. When InputQueue receives an input event from the dispatcher, it generates a finishedToken that encodes the channel's receive pipe fd, and a sequence number. The finishedToken is used by the ViewRoot as a handle for the event so that it can tell the InputQueue when the event has finished being processed. Here is the race: 1. InputQueue receives an input event, assigns a new finishedToken. 2. ViewRoot begins processing the input event. 3. During processing, ViewRoot unregisters the InputChannel. 4. A new InputChannel is created and is registered with the Input Queue. This InputChannel happens to have the same receive pipe fd as the one previously registered. 5. ViewRoot tells the InputQueue that it has finished processing the input event, passing along the original finishedToken. 6. InputQueue throws an exception because the finishedToken's receive pipe fd is registered but the sequence number is incorrect so it assumes that the client has called finish spuriously. The fix is to include a unique connection id within the finishedToken so that the InputQueue can accurately confirm that the token belongs to the currently registered InputChannel rather than to an old one that happened to have the same receive pipe fd. When it notices this, it ignores the spurious finish. I've also made a couple of other small changes to avoid similar races elsewhere. This patch set also includes a fix to synthesize a finished signal when the input channel is unregistered on the client side to help keep the server and client in sync. Bug: 2834068 Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
2010-08-17 22:59:26 +00:00
ssize_t InputDispatcher::getConnectionIndex(const sp<InputChannel>& inputChannel) {
ssize_t connectionIndex = mConnectionsByReceiveFd.indexOfKey(inputChannel->getReceivePipeFd());
if (connectionIndex >= 0) {
sp<Connection> connection = mConnectionsByReceiveFd.valueAt(connectionIndex);
if (connection->inputChannel.get() == inputChannel.get()) {
return connectionIndex;
}
}
return -1;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void InputDispatcher::activateConnectionLocked(Connection* connection) {
for (size_t i = 0; i < mActiveConnections.size(); i++) {
if (mActiveConnections.itemAt(i) == connection) {
return;
}
}
mActiveConnections.add(connection);
}
void InputDispatcher::deactivateConnectionLocked(Connection* connection) {
for (size_t i = 0; i < mActiveConnections.size(); i++) {
if (mActiveConnections.itemAt(i) == connection) {
mActiveConnections.removeAt(i);
return;
}
}
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void InputDispatcher::onDispatchCycleStartedLocked(
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
nsecs_t currentTime, const sp<Connection>& connection) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void InputDispatcher::onDispatchCycleFinishedLocked(
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
nsecs_t currentTime, const sp<Connection>& connection, bool recoveredFromANR) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
if (recoveredFromANR) {
LOGI("channel '%s' ~ Recovered from ANR. %01.1fms since event, "
"%01.1fms since dispatch, %01.1fms since ANR",
connection->getInputChannelName(),
connection->getEventLatencyMillis(currentTime),
connection->getDispatchLatencyMillis(currentTime),
connection->getANRLatencyMillis(currentTime));
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
CommandEntry* commandEntry = postCommandLocked(
& InputDispatcher::doNotifyInputChannelRecoveredFromANRLockedInterruptible);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
commandEntry->connection = connection;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void InputDispatcher::onDispatchCycleANRLocked(
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
nsecs_t currentTime, const sp<Connection>& connection) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
LOGI("channel '%s' ~ Not responding! %01.1fms since event, %01.1fms since dispatch",
connection->getInputChannelName(),
connection->getEventLatencyMillis(currentTime),
connection->getDispatchLatencyMillis(currentTime));
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
CommandEntry* commandEntry = postCommandLocked(
& InputDispatcher::doNotifyInputChannelANRLockedInterruptible);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
commandEntry->connection = connection;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void InputDispatcher::onDispatchCycleBrokenLocked(
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
nsecs_t currentTime, const sp<Connection>& connection) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
LOGE("channel '%s' ~ Channel is unrecoverably broken and will be disposed!",
connection->getInputChannelName());
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
CommandEntry* commandEntry = postCommandLocked(
& InputDispatcher::doNotifyInputChannelBrokenLockedInterruptible);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
commandEntry->connection = connection;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::doNotifyConfigurationChangedInterruptible(
CommandEntry* commandEntry) {
mLock.unlock();
mPolicy->notifyConfigurationChanged(commandEntry->eventTime);
mLock.lock();
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void InputDispatcher::doNotifyInputChannelBrokenLockedInterruptible(
CommandEntry* commandEntry) {
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
sp<Connection> connection = commandEntry->connection;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
if (connection->status != Connection::STATUS_ZOMBIE) {
mLock.unlock();
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
mPolicy->notifyInputChannelBroken(connection->inputChannel);
mLock.lock();
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
}
void InputDispatcher::doNotifyInputChannelANRLockedInterruptible(
CommandEntry* commandEntry) {
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
sp<Connection> connection = commandEntry->connection;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
if (connection->status != Connection::STATUS_ZOMBIE) {
mLock.unlock();
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
nsecs_t newTimeout = mPolicy->notifyInputChannelANR(connection->inputChannel);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
mLock.lock();
nsecs_t currentTime = now();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
resumeAfterTimeoutDispatchCycleLocked(currentTime, connection, newTimeout);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
}
void InputDispatcher::doNotifyInputChannelRecoveredFromANRLockedInterruptible(
CommandEntry* commandEntry) {
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
sp<Connection> connection = commandEntry->connection;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
if (connection->status != Connection::STATUS_ZOMBIE) {
mLock.unlock();
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
mPolicy->notifyInputChannelRecoveredFromANR(connection->inputChannel);
mLock.lock();
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::doInterceptKeyBeforeDispatchingLockedInterruptible(
CommandEntry* commandEntry) {
KeyEntry* entry = commandEntry->keyEntry;
mReusableKeyEvent.initialize(entry->deviceId, entry->source, entry->action, entry->flags,
entry->keyCode, entry->scanCode, entry->metaState, entry->repeatCount,
entry->downTime, entry->eventTime);
mLock.unlock();
bool consumed = mPolicy->interceptKeyBeforeDispatching(commandEntry->inputChannel,
& mReusableKeyEvent, entry->policyFlags);
mLock.lock();
entry->interceptKeyResult = consumed
? KeyEntry::INTERCEPT_KEY_RESULT_SKIP
: KeyEntry::INTERCEPT_KEY_RESULT_CONTINUE;
mAllocator.releaseKeyEntry(entry);
}
void InputDispatcher::doPokeUserActivityLockedInterruptible(CommandEntry* commandEntry) {
mLock.unlock();
mPolicy->pokeUserActivity(commandEntry->eventTime, commandEntry->windowType,
commandEntry->userActivityEventType);
mLock.lock();
}
void InputDispatcher::doTargetsNotReadyTimeoutLockedInterruptible(
CommandEntry* commandEntry) {
mLock.unlock();
nsecs_t newTimeout;
if (commandEntry->inputChannel.get()) {
newTimeout = mPolicy->notifyInputChannelANR(commandEntry->inputChannel);
} else if (commandEntry->inputApplicationHandle.get()) {
newTimeout = mPolicy->notifyANR(commandEntry->inputApplicationHandle);
} else {
newTimeout = 0;
}
mLock.lock();
resumeAfterTargetsNotReadyTimeoutLocked(newTimeout);
}
void InputDispatcher::dump(String8& dump) {
dumpDispatchStateLocked(dump);
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// --- InputDispatcher::Allocator ---
InputDispatcher::Allocator::Allocator() {
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
void InputDispatcher::Allocator::initializeEventEntry(EventEntry* entry, int32_t type,
nsecs_t eventTime) {
entry->type = type;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
entry->refCount = 1;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
entry->dispatchInProgress = false;
Remember to initialize timestamps in the dispatch allocator Change-Id: I83a2d353c34ff84a7d130e602c6dedc6a5541944
2010-06-23 23:50:30 +00:00
entry->eventTime = eventTime;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
entry->injectionResult = INPUT_EVENT_INJECTION_PENDING;
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
entry->injectionIsAsync = false;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
entry->injectorPid = -1;
entry->injectorUid = -1;
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 22:48:59 +00:00
entry->pendingSyncDispatches = 0;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
}
InputDispatcher::ConfigurationChangedEntry*
InputDispatcher::Allocator::obtainConfigurationChangedEntry(nsecs_t eventTime) {
ConfigurationChangedEntry* entry = mConfigurationChangeEntryPool.alloc();
initializeEventEntry(entry, EventEntry::TYPE_CONFIGURATION_CHANGED, eventTime);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return entry;
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
InputDispatcher::KeyEntry* InputDispatcher::Allocator::obtainKeyEntry(nsecs_t eventTime,
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
int32_t deviceId, int32_t source, uint32_t policyFlags, int32_t action,
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
int32_t flags, int32_t keyCode, int32_t scanCode, int32_t metaState,
int32_t repeatCount, nsecs_t downTime) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
KeyEntry* entry = mKeyEntryPool.alloc();
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
initializeEventEntry(entry, EventEntry::TYPE_KEY, eventTime);
entry->deviceId = deviceId;
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
entry->source = source;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
entry->policyFlags = policyFlags;
entry->action = action;
entry->flags = flags;
entry->keyCode = keyCode;
entry->scanCode = scanCode;
entry->metaState = metaState;
entry->repeatCount = repeatCount;
entry->downTime = downTime;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
entry->syntheticRepeat = false;
entry->interceptKeyResult = KeyEntry::INTERCEPT_KEY_RESULT_UNKNOWN;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return entry;
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
InputDispatcher::MotionEntry* InputDispatcher::Allocator::obtainMotionEntry(nsecs_t eventTime,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
int32_t deviceId, int32_t source, uint32_t policyFlags, int32_t action, int32_t flags,
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
int32_t metaState, int32_t edgeFlags, float xPrecision, float yPrecision,
nsecs_t downTime, uint32_t pointerCount,
const int32_t* pointerIds, const PointerCoords* pointerCoords) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
MotionEntry* entry = mMotionEntryPool.alloc();
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
initializeEventEntry(entry, EventEntry::TYPE_MOTION, eventTime);
entry->eventTime = eventTime;
entry->deviceId = deviceId;
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
entry->source = source;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
entry->policyFlags = policyFlags;
entry->action = action;
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
entry->flags = flags;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
entry->metaState = metaState;
entry->edgeFlags = edgeFlags;
entry->xPrecision = xPrecision;
entry->yPrecision = yPrecision;
entry->downTime = downTime;
entry->pointerCount = pointerCount;
entry->firstSample.eventTime = eventTime;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
entry->firstSample.next = NULL;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
entry->lastSample = & entry->firstSample;
for (uint32_t i = 0; i < pointerCount; i++) {
entry->pointerIds[i] = pointerIds[i];
entry->firstSample.pointerCoords[i] = pointerCoords[i];
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return entry;
}
InputDispatcher::DispatchEntry* InputDispatcher::Allocator::obtainDispatchEntry(
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
EventEntry* eventEntry,
int32_t targetFlags, float xOffset, float yOffset, nsecs_t timeout) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
DispatchEntry* entry = mDispatchEntryPool.alloc();
entry->eventEntry = eventEntry;
eventEntry->refCount += 1;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
entry->targetFlags = targetFlags;
entry->xOffset = xOffset;
entry->yOffset = yOffset;
entry->timeout = timeout;
entry->inProgress = false;
entry->headMotionSample = NULL;
entry->tailMotionSample = NULL;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
return entry;
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
InputDispatcher::CommandEntry* InputDispatcher::Allocator::obtainCommandEntry(Command command) {
CommandEntry* entry = mCommandEntryPool.alloc();
entry->command = command;
return entry;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void InputDispatcher::Allocator::releaseEventEntry(EventEntry* entry) {
switch (entry->type) {
case EventEntry::TYPE_CONFIGURATION_CHANGED:
releaseConfigurationChangedEntry(static_cast<ConfigurationChangedEntry*>(entry));
break;
case EventEntry::TYPE_KEY:
releaseKeyEntry(static_cast<KeyEntry*>(entry));
break;
case EventEntry::TYPE_MOTION:
releaseMotionEntry(static_cast<MotionEntry*>(entry));
break;
default:
assert(false);
break;
}
}
void InputDispatcher::Allocator::releaseConfigurationChangedEntry(
ConfigurationChangedEntry* entry) {
entry->refCount -= 1;
if (entry->refCount == 0) {
mConfigurationChangeEntryPool.free(entry);
} else {
assert(entry->refCount > 0);
}
}
void InputDispatcher::Allocator::releaseKeyEntry(KeyEntry* entry) {
entry->refCount -= 1;
if (entry->refCount == 0) {
mKeyEntryPool.free(entry);
} else {
assert(entry->refCount > 0);
}
}
void InputDispatcher::Allocator::releaseMotionEntry(MotionEntry* entry) {
entry->refCount -= 1;
if (entry->refCount == 0) {
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
for (MotionSample* sample = entry->firstSample.next; sample != NULL; ) {
MotionSample* next = sample->next;
mMotionSamplePool.free(sample);
sample = next;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
mMotionEntryPool.free(entry);
} else {
assert(entry->refCount > 0);
}
}
void InputDispatcher::Allocator::releaseDispatchEntry(DispatchEntry* entry) {
releaseEventEntry(entry->eventEntry);
mDispatchEntryPool.free(entry);
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
void InputDispatcher::Allocator::releaseCommandEntry(CommandEntry* entry) {
mCommandEntryPool.free(entry);
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void InputDispatcher::Allocator::appendMotionSample(MotionEntry* motionEntry,
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
nsecs_t eventTime, const PointerCoords* pointerCoords) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
MotionSample* sample = mMotionSamplePool.alloc();
sample->eventTime = eventTime;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
uint32_t pointerCount = motionEntry->pointerCount;
for (uint32_t i = 0; i < pointerCount; i++) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
sample->pointerCoords[i] = pointerCoords[i];
}
sample->next = NULL;
motionEntry->lastSample->next = sample;
motionEntry->lastSample = sample;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// --- InputDispatcher::EventEntry ---
void InputDispatcher::EventEntry::recycle() {
injectionResult = INPUT_EVENT_INJECTION_PENDING;
dispatchInProgress = false;
pendingSyncDispatches = 0;
}
// --- InputDispatcher::KeyEntry ---
void InputDispatcher::KeyEntry::recycle() {
EventEntry::recycle();
syntheticRepeat = false;
interceptKeyResult = INTERCEPT_KEY_RESULT_UNKNOWN;
}
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 22:51:08 +00:00
// --- InputDispatcher::MotionEntry ---
uint32_t InputDispatcher::MotionEntry::countSamples() const {
uint32_t count = 1;
for (MotionSample* sample = firstSample.next; sample != NULL; sample = sample->next) {
count += 1;
}
return count;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
// --- InputDispatcher::InputState ---
InputDispatcher::InputState::InputState() :
mIsOutOfSync(false) {
}
InputDispatcher::InputState::~InputState() {
}
bool InputDispatcher::InputState::isNeutral() const {
return mKeyMementos.isEmpty() && mMotionMementos.isEmpty();
}
bool InputDispatcher::InputState::isOutOfSync() const {
return mIsOutOfSync;
}
void InputDispatcher::InputState::setOutOfSync() {
if (! isNeutral()) {
mIsOutOfSync = true;
}
}
void InputDispatcher::InputState::resetOutOfSync() {
mIsOutOfSync = false;
}
InputDispatcher::InputState::Consistency InputDispatcher::InputState::trackEvent(
const EventEntry* entry) {
switch (entry->type) {
case EventEntry::TYPE_KEY:
return trackKey(static_cast<const KeyEntry*>(entry));
case EventEntry::TYPE_MOTION:
return trackMotion(static_cast<const MotionEntry*>(entry));
default:
return CONSISTENT;
}
}
InputDispatcher::InputState::Consistency InputDispatcher::InputState::trackKey(
const KeyEntry* entry) {
int32_t action = entry->action;
for (size_t i = 0; i < mKeyMementos.size(); i++) {
KeyMemento& memento = mKeyMementos.editItemAt(i);
if (memento.deviceId == entry->deviceId
&& memento.source == entry->source
&& memento.keyCode == entry->keyCode
&& memento.scanCode == entry->scanCode) {
switch (action) {
case AKEY_EVENT_ACTION_UP:
mKeyMementos.removeAt(i);
if (isNeutral()) {
mIsOutOfSync = false;
}
return CONSISTENT;
case AKEY_EVENT_ACTION_DOWN:
return TOLERABLE;
default:
return BROKEN;
}
}
}
switch (action) {
case AKEY_EVENT_ACTION_DOWN: {
mKeyMementos.push();
KeyMemento& memento = mKeyMementos.editTop();
memento.deviceId = entry->deviceId;
memento.source = entry->source;
memento.keyCode = entry->keyCode;
memento.scanCode = entry->scanCode;
memento.downTime = entry->downTime;
return CONSISTENT;
}
default:
return BROKEN;
}
}
InputDispatcher::InputState::Consistency InputDispatcher::InputState::trackMotion(
const MotionEntry* entry) {
int32_t action = entry->action & AMOTION_EVENT_ACTION_MASK;
for (size_t i = 0; i < mMotionMementos.size(); i++) {
MotionMemento& memento = mMotionMementos.editItemAt(i);
if (memento.deviceId == entry->deviceId
&& memento.source == entry->source) {
switch (action) {
case AMOTION_EVENT_ACTION_UP:
case AMOTION_EVENT_ACTION_CANCEL:
mMotionMementos.removeAt(i);
if (isNeutral()) {
mIsOutOfSync = false;
}
return CONSISTENT;
case AMOTION_EVENT_ACTION_DOWN:
return TOLERABLE;
case AMOTION_EVENT_ACTION_POINTER_DOWN:
if (entry->pointerCount == memento.pointerCount + 1) {
memento.setPointers(entry);
return CONSISTENT;
}
return BROKEN;
case AMOTION_EVENT_ACTION_POINTER_UP:
if (entry->pointerCount == memento.pointerCount - 1) {
memento.setPointers(entry);
return CONSISTENT;
}
return BROKEN;
case AMOTION_EVENT_ACTION_MOVE:
if (entry->pointerCount == memento.pointerCount) {
return CONSISTENT;
}
return BROKEN;
default:
return BROKEN;
}
}
}
switch (action) {
case AMOTION_EVENT_ACTION_DOWN: {
mMotionMementos.push();
MotionMemento& memento = mMotionMementos.editTop();
memento.deviceId = entry->deviceId;
memento.source = entry->source;
memento.xPrecision = entry->xPrecision;
memento.yPrecision = entry->yPrecision;
memento.downTime = entry->downTime;
memento.setPointers(entry);
return CONSISTENT;
}
default:
return BROKEN;
}
}
void InputDispatcher::InputState::MotionMemento::setPointers(const MotionEntry* entry) {
pointerCount = entry->pointerCount;
for (uint32_t i = 0; i < entry->pointerCount; i++) {
pointerIds[i] = entry->pointerIds[i];
pointerCoords[i] = entry->lastSample->pointerCoords[i];
}
}
void InputDispatcher::InputState::synthesizeCancelationEvents(
Allocator* allocator, Vector<EventEntry*>& outEvents) const {
for (size_t i = 0; i < mKeyMementos.size(); i++) {
const KeyMemento& memento = mKeyMementos.itemAt(i);
outEvents.push(allocator->obtainKeyEntry(now(),
memento.deviceId, memento.source, 0,
AKEY_EVENT_ACTION_UP, AKEY_EVENT_FLAG_CANCELED,
memento.keyCode, memento.scanCode, 0, 0, memento.downTime));
}
for (size_t i = 0; i < mMotionMementos.size(); i++) {
const MotionMemento& memento = mMotionMementos.itemAt(i);
outEvents.push(allocator->obtainMotionEntry(now(),
memento.deviceId, memento.source, 0,
AMOTION_EVENT_ACTION_CANCEL, 0, 0, 0,
memento.xPrecision, memento.yPrecision, memento.downTime,
memento.pointerCount, memento.pointerIds, memento.pointerCoords));
}
}
void InputDispatcher::InputState::clear() {
mKeyMementos.clear();
mMotionMementos.clear();
mIsOutOfSync = false;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// --- InputDispatcher::Connection ---
InputDispatcher::Connection::Connection(const sp<InputChannel>& inputChannel) :
status(STATUS_NORMAL), inputChannel(inputChannel), inputPublisher(inputChannel),
nextTimeoutTime(LONG_LONG_MAX),
lastEventTime(LONG_LONG_MAX), lastDispatchTime(LONG_LONG_MAX),
lastANRTime(LONG_LONG_MAX) {
}
InputDispatcher::Connection::~Connection() {
}
status_t InputDispatcher::Connection::initialize() {
return inputPublisher.initialize();
}
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
void InputDispatcher::Connection::setNextTimeoutTime(nsecs_t currentTime, nsecs_t timeout) {
nextTimeoutTime = (timeout >= 0) ? currentTime + timeout : LONG_LONG_MAX;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
void InputDispatcher::Connection::resetTimeout(nsecs_t currentTime) {
if (outboundQueue.isEmpty()) {
nextTimeoutTime = LONG_LONG_MAX;
} else {
setNextTimeoutTime(currentTime, outboundQueue.headSentinel.next->timeout);
}
}
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
const char* InputDispatcher::Connection::getStatusLabel() const {
switch (status) {
case STATUS_NORMAL:
return "NORMAL";
case STATUS_BROKEN:
return "BROKEN";
case STATUS_NOT_RESPONDING:
return "NOT_RESPONDING";
case STATUS_ZOMBIE:
return "ZOMBIE";
default:
return "UNKNOWN";
}
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
InputDispatcher::DispatchEntry* InputDispatcher::Connection::findQueuedDispatchEntryForEvent(
const EventEntry* eventEntry) const {
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
for (DispatchEntry* dispatchEntry = outboundQueue.tailSentinel.prev;
dispatchEntry != & outboundQueue.headSentinel; dispatchEntry = dispatchEntry->prev) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
if (dispatchEntry->eventEntry == eventEntry) {
return dispatchEntry;
}
}
return NULL;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
// --- InputDispatcher::CommandEntry ---
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 18:49:43 +00:00
InputDispatcher::CommandEntry::CommandEntry() :
keyEntry(NULL) {
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
}
InputDispatcher::CommandEntry::~CommandEntry() {
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// --- InputDispatcherThread ---
InputDispatcherThread::InputDispatcherThread(const sp<InputDispatcherInterface>& dispatcher) :
Thread(/*canCallJava*/ true), mDispatcher(dispatcher) {
}
InputDispatcherThread::~InputDispatcherThread() {
}
bool InputDispatcherThread::threadLoop() {
mDispatcher->dispatchOnce();
return true;
}
} // namespace android
Reference in New Issue Copy Permalink