3
0
replicant-device_samsung_ga.../configs/sirfgps.conf
Daniel Hillenbrand 51841ab0c5 initial commit
2012-07-25 04:32:16 +02:00

39 lines
1.4 KiB
Plaintext

#CSR SiRF plc
#PROJECT_NAME : white Space is not allowed
#UART_DRIVER : Uart Driver Path
#RESET_GPIO : Reset GPIO Driver Path
#ONOFF_GPIO : OnOff GPIO Driver Path
#EXTERNAL_LNA : 1 - use External LNA, 0 - use Internal LNA only
#REF_CLOCK_26MHZ: 1 - use 26MHz TCXO, 0 - use 16.369MHz TCXO
#UART_BAUD_RATE : 0 - 115200bps 1 - 230400, 2 - 460800, 3 - 57600
#FREQUENCY_AIDING : 0 - Disable, 1 - Enable
#SENSOR_AIDING : 0 - Disable, 1 - Enable
#SET_ID_IMSI : 1 - Use IMSI for SET ID, 0 - Use MSISDN for SET ID, especially for Japan Network Operators
#DEBUGGING_FILES : 0 - no log file, 1 - log files enabled
#SSL_ENABLED : 0 - SSL Disabled, 1 - SSL Enabled
#CERTI_VERSION : 0 - TLSv1 , 1 - SSLv3 , 2 - SSLv23
#CP_RESPONSETIME : 0 - no priority, 1 - resposne priority time, 2 - resposne priority position ,3 - resposne priority use entire response time
#REAIDING=20
#CONTROL_PLANE : 1 - CP Enabled, 0 - CP Disabled, for MP3 player or PND
#ATT_NETWORK_OPERATOR : 1 - for AT&T, 0 - for other network operator
PROJECT=SAMSUNG_S5PC210
UART_DRIVER=/dev/ttySAC1
RESET_GPIO=/sys/devices/virtual/sec/gps/GPS_nRST/value
ONOFF_GPIO=/sys/devices/virtual/sec/gps/GPS_PWR_EN/value
EXTERNAL_LNA=0
REF_CLOCK_26MHZ=1
UART_BAUD_RATE=2
FREQUENCY_AIDING=1
SENSOR_AIDING=1
SET_ID_IMSI=1
DEBUGGING_FILES=0
SSL_ENABLED=0
CERTI_VERSION=0
CP_RESPONSETIME=2
CONTROL_PLANE=1
ATT_NETWORK_OPERATOR=0
ICS_NETWORK_OPERATOR=1
SGEE=0
EMC_ENABLE=1
LOG_PATH=/data