Initial commit

Signed-off-by: Velsoth <velsoth@adhoc.zone>
This commit is contained in:
Fivel Sotheby 2019-11-11 01:49:18 +00:00
commit 9bc8c3d02f
19 changed files with 983 additions and 0 deletions

View File

@ -0,0 +1,16 @@
# Copyright (C) 2012 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
USE_CAMERA_STUB := false
BOARD_USES_GENERIC_AUDIO := false

View File

@ -0,0 +1,32 @@
# Copyright (C) 2012 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
LOCAL_PATH := vendor/samsung/smdk4412-common
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/proprietary/vendor/firmware/bcm4334.hcd:vendor/firmware/bcm4334.hcd \
$(LOCAL_PATH)/proprietary/vendor/firmware/bcm4334_murata.hcd:vendor/firmware/bcm4334_murata.hcd \
$(LOCAL_PATH)/proprietary/vendor/firmware/bcm4334_semco.hcd:vendor/firmware/bcm4334_semco.hcd \
$(LOCAL_PATH)/proprietary/vendor/firmware/bcm4334_semcosh.hcd:vendor/firmware/bcm4334_semcosh.hcd \
$(LOCAL_PATH)/proprietary/vendor/firmware/bcmdhd_apsta.bin_b2:vendor/firmware/bcmdhd_apsta.bin_b2 \
$(LOCAL_PATH)/proprietary/vendor/firmware/bcmdhd_mfg.bin_b2:vendor/firmware/bcmdhd_mfg.bin_b2 \
$(LOCAL_PATH)/proprietary/vendor/firmware/bcmdhd_p2p.bin_b2:vendor/firmware/bcmdhd_p2p.bin_b2 \
$(LOCAL_PATH)/proprietary/vendor/firmware/bcmdhd_sta.bin_b2:vendor/firmware/bcmdhd_sta.bin_b2 \
$(LOCAL_PATH)/proprietary/vendor/firmware/mfc_fw.bin:vendor/firmware/mfc_fw.bin \
$(LOCAL_PATH)/proprietary/vendor/firmware/nvram_mfg.txt_murata:vendor/firmware/nvram_mfg.txt_murata \
$(LOCAL_PATH)/proprietary/vendor/firmware/nvram_mfg.txt_semcosh:vendor/firmware/nvram_mfg.txt_semcosh \
$(LOCAL_PATH)/proprietary/vendor/firmware/nvram_mfg.txt:vendor/firmware/nvram_mfg.txt \
$(LOCAL_PATH)/proprietary/vendor/firmware/nvram_net.txt_murata:vendor/firmware/nvram_net.txt_murata \
$(LOCAL_PATH)/proprietary/vendor/firmware/nvram_net.txt_semcosh:vendor/firmware/nvram_net.txt_semcosh \
$(LOCAL_PATH)/proprietary/vendor/firmware/nvram_net.txt:vendor/firmware/nvram_net.txt

View File

@ -0,0 +1,19 @@
# Copyright (C) 2012 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Pick up overlay for features that depend on non-open-source files
DEVICE_PACKAGE_OVERLAYS += vendor/samsung/smdk4412-common/overlay
$(call inherit-product, vendor/samsung/smdk4412-common/common-vendor-blobs.mk)

View File

@ -0,0 +1,17 @@
# Copyright (C) 2012 The Android Open Source Project
# Copyright (C) 2012 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
LOCAL_PATH := $(call my-dir)

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

View File

@ -0,0 +1,159 @@
# SWB-B52_S6_17E_4p2_58.43_N_07/27/2012
manfid=0x2d0
prodid=0x05c1
vendid=0x14e4
devid=0x4380
boardtype=0x05de
boardrev=0x1200
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=3
boardflags=0x10081a01
xtalfreq=37400
nocrc=1
ag0=252
aa2g=1
ccode=ALL
pa0itssit=0x20
#PA parameters for 2.4GHz_0327
pa0b0=0x4094
pa0b1=0xF9E5
pa0b2=0x1FB
tssifloor2g=12
extpagain2g=2
extpagain5g=2
cckPwrOffset=12
# rssi params for 2.4GHz
rssismf2g=0x2
rssismc2g=0xC
rssisav2g=0x1
# rssi params for 5GHz
rssismf5g=0x8
rssismc5g=0x8
rssisav5g=0x1
#PA parameters for lower band_0327
pa1lob0=0x1492
pa1lob1=0xFD5E
pa1lob2=0xFF23
tssifloor5gl=18
#PA parameters for midband
pa1b0=0x157B
pa1b1=0xFD48
pa1b2=0xFF27
tssifloor5gm=18
#PA parameters for high band
pa1hib0=0x15BB
pa1hib1=0xFD43
pa1hib2=0xFF2A
tssifloor5gh=18
PwrOffset40mhz5g=4
rxpo5g=0
maxp2ga0=75
ofdm2gpo=0x77777777
mcs2gpo0=0x8888
mcs2gpo1=0x8888
cckdigfilttype=24
ofdmdigfilttype2g=2
ofdmdigfilttype5g=3
ofdm40digfilttype=9
maxp5gla0=66
ofdm5glpo=0x55555555
mcs5glpo0=0x7777
mcs5glpo1=0x7777
mcs5glpo2=0x9999
mcs5glpo3=0x9999
maxp5ga0=66
ofdm5gpo=0X44444444
mcs5gpo0=0x6666
mcs5gpo1=0x6666
mcs5gpo2=0x8888
mcs5gpo3=0x8888
maxp5gha0=66
ofdm5ghpo=0x44444444
mcs5ghpo0=0x6666
mcs5ghpo1=0x6666
mcs5ghpo2=0x8888
mcs5ghpo3=0x8888
#il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b
pagc2g=0x10
#For SEMCO B53-R05-eLNA Module
swctrlmap_2g=0x0c0c0c0c,0x12120202,0x02020202,0x11202,0x1ff
swctrlmap_5g=0x40404040,0xa0a0a0a0,0x80808080,0x11202,0x2f8
elna_off_gain_idx_2g=30
triso2g=6
triso5g=3
muxenab=0x10
#sd_gpout=0
#sd_oobonly=1
dacrate2xen=1
txalpfbyp=1
# In RC58.29, adding to keep the txALPF powered up , even when the txALPF is bypassed.
txalpfpu=1
# 11b ACR Performance
aci_detect_en_2g=1
dacpu.fab.4=1
gain_settle_dly_2g=4
gain_settle_dly_5g=4
#For TSMC rx sensitivity in low rate
noise_cal_po_2g=-1
#For UMC rx sensitivity in low rate
noise_cal_po_2g.fab.4=6
noise_cal_po_40_2g=-1
noise_cal_high_gain_2g=73
noise_cal_nf_substract_val_2g=346
noise_cal_po_5g=-1
noise_cal_po_40_5g=-1
noise_cal_high_gain_5g=73
# Adding in RC58.29
noise_cal_nf_substract_val_5g=346
iqlocalidx5g=55
# In RC58.35/38. Added on For LOFT
dlocalidx5g=75
# In RC58.33, change EPA_or_PAD_lpbck5g=1 to lpbckmode5g=1
#EPA_or_PAD_lpbck5g=1
lpbckmode5g=1
txiqlopapu5g=0
iqcalidx5g=50
txiqlopapu2g=0
#In RC58.35, Change Value to 5
dlorange_lowlimit=5
loflag=1
# In RC58.29, for RSSI return with pkteng_stats
rssicorrnorm=3
rssicorratten=3
rssicorrnorm5g=5,3,3
rssicorratten5g=5,3,3
#for BT-coexistence
btc_params80=0
btc_params6=10
btc_params95=53

View File

@ -0,0 +1,132 @@
#120726 Nvram VM Version 47
manfid=0x2d0
prodid=0x05c1
vendid=0x14e4
devid=0x4380
boardtype=0x05de
boardrev=0x1200
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=3
boardflags=0x10081a01
xtalfreq=37400
nocrc=1
ag0=252
aa2g=1
ccode=ALL
#Power Cal
pa0itssit=0x20
pa0b0=0x15a3
pa0b1=0xfd30
pa0b2=0xff17
tssifloor2g=24
extpagain2g=2
extpagain5g=2
cckPwrOffset=8
rssismf2g=0xf
rssismc2g=0x9
rssisav2g=0x1
rssismf5g=0x9
rssismc5g=0x9
rssisav5g=0x1
pa1lob0=0x1532
pa1lob1=0xfd5e
pa1lob2=0xff3e
tssifloor5gl=26
pa1b0=0x1542
pa1b1=0xfd67
pa1b2=0xff51
tssifloor5gm=26
pa1hib0=0x1544
pa1hib1=0xfd4c
pa1hib2=0xff42
tssifloor5gh=26
PwrOffset40mhz2g=4
PwrOffset40mhz5g=-10
rxpo5g=0
#2.4GHz Power
maxp2ga0=0x4a
ofdm2gpo=0x55555555
mcs2gpo0=0x7777
mcs2gpo1=0x7777
mcs2gpo2=0x7777
mcs2gpo3=0x7777
#5GHz Power
maxp5gla0=0x48
ofdm2gpo=0x44444444
mcs2gpo0=0x6666
mcs2gpo1=0x6666
mcs2gpo2=0x6666
mcs2gpo3=0x6666
maxp5ga0=0x4a
ofdm5gpo=0x44444444
mcs5gpo0=0x6666
mcs5gpo1=0x6666
mcs5gpo2=0x6666
mcs5gpo3=0x6666
maxp5gha0=0x48
ofdm5ghpo=0x44444444
mcs5ghpo0=0x6666
mcs5ghpo1=0x6666
mcs5ghpo2=0x6666
mcs5ghpo3=0x6666
pagc2g=0x10
#switch
swctrlmap_2g=0x00010001,0x00420002,0x00020002,0x044202,0x1ff
swctrlmap_5g=0x00080008,0x00300010,0x00100010,0x044202,0x238
elna_off_gain_idx_2g=27
triso2g=4
triso5g=5
#for oob
muxenab=0x10
dacrate2xen=1
txalpfbyp=1
txalpfpu=1
#sd_gpout=0
#sd_oobonly=1
dacpu.fab.4=1
aci_detect_en_2g=1
gain_settle_dly_2g=4
gain_settle_dly_5g=4
noise_cal_po_2g=-1
noise_cal_po_40_2g=-1
noise_cal_high_gain_2g=73
noise_cal_nf_substract_val_2g=346
noise_cal_po_5g=-1
noise_cal_po_40_5g=-1
noise_cal_high_gain_5g=73
noise_cal_nf_substract_val_5g=346
ofdmdigfilttype2g=3
ofdmdigfilttype5g=0
ofdm40digfilttype=8
cckdigfilttype=24
iqlocalidx5g=55
dlocalidx5g=75
lpbckmode5g=1
txiqlopapu5g=0
iqcalidx5g=50
txiqlopapu2g=0
dlorange_lowlimit=5
loflag=1
gmgc2g=224
#for RSSI return with pkteng_stats in MFG Nvram only
rssicorrnorm=0
rssicorratten=0
rssicorrnorm5g=3,4,4
rssicorratten5g=3,4,4
triso2g.fab.4=6
#for Co-Ex
btc_params80=0
btc_params6=10
btc_params95=53

View File

@ -0,0 +1,159 @@
# SWB-B53_R05D_B2_B3_QM_17E_4p2_58.54_06/07/2012
manfid=0x2d0
prodid=0x05c1
vendid=0x14e4
devid=0x4380
boardtype=0x05de
boardrev=0x1200
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=3
boardflags=0x10081a01
xtalfreq=37400
nocrc=1
ag0=252
aa2g=1
ccode=ALL
pa0itssit=0x20
#PA parameters for 2.4GHz_QM_4p2_120517
pa0b0=0x2AFD
pa0b1=0xFB41
pa0b2=0x6C
tssifloor2g=12
extpagain2g=2
extpagain5g=2
cckPwrOffset=12
# rssi params for 2.4GHz
rssismf2g=0x2
rssismc2g=0xC
rssisav2g=0x1
# rssi params for 5GHz
rssismf5g=0x8
rssismc5g=0x8
rssisav5g=0x1
#PA parameters for lower band_QM_4p2_120214
pa1lob0=0x1672
pa1lob1=0xFD53
pa1lob2=0xFF69
tssifloor5gl=18
#PA parameters for midband
pa1b0=0x1712
pa1b1=0xFD5D
pa1b2=0xFF82
tssifloor5gm=18
#PA parameters for high band
pa1hib0=0x1696
pa1hib1=0xFD64
pa1hib2=0xFF7A
tssifloor5gh=18
PwrOffset40mhz5g=-10
rxpo5g=0
maxp2ga0=72
ofdm2gpo=0x55555555
mcs2gpo0=0x7777
mcs2gpo1=0x7777
cckdigfilttype=24
ofdmdigfilttype2g=9
ofdmdigfilttype5g=3
ofdm40digfilttype=8
maxp5gla0=64
ofdm5glpo=0x33333333
mcs5glpo0=0x5555
mcs5glpo1=0x5555
mcs5glpo2=0x7777
mcs5glpo3=0x7777
maxp5ga0=66
ofdm5gpo=0x33333333
mcs5gpo0=0x5555
mcs5gpo1=0x5555
mcs5gpo2=0x7777
mcs5gpo3=0x7777
maxp5gha0=65
ofdm5ghpo=0x33333333
mcs5ghpo0=0x5555
mcs5ghpo1=0x5555
mcs5ghpo2=0x7777
mcs5ghpo3=0x7777
#il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b
pagc2g=0x10
#For SEMCO B53-R05-eLNA Module
swctrlmap_2g=0x0c0c0c0c,0x12120202,0x02020202,0x11202,0x1ff
swctrlmap_5g=0x40404040,0xa0a0a0a0,0x80808080,0x11202,0x2f8
elna_off_gain_idx_2g=30
triso2g=6
triso5g=3
muxenab=0x10
#sd_gpout=0
#sd_oobonly=1
dacrate2xen=1
txalpfbyp=1
# In RC58.29, adding to keep the txALPF powered up , even when the txALPF is bypassed.
txalpfpu=1
# 11b ACR Performance
aci_detect_en_2g=1
dacpu.fab.4=1
gain_settle_dly_2g=4
gain_settle_dly_5g=4
#For TSMC rx sensitivity in low rate
noise_cal_po_2g=-1
#For UMC rx sensitivity in low rate
noise_cal_po_2g.fab.4=6
noise_cal_po_40_2g=-1
noise_cal_high_gain_2g=73
noise_cal_nf_substract_val_2g=346
noise_cal_po_5g=-1
noise_cal_po_40_5g=-1
noise_cal_high_gain_5g=73
# Adding in RC58.29
noise_cal_nf_substract_val_5g=346
iqlocalidx5g=55
# In RC58.35/38. Added on For LOFT
dlocalidx5g=75
# In RC58.33, change EPA_or_PAD_lpbck5g=1 to lpbckmode5g=1
#EPA_or_PAD_lpbck5g=1
lpbckmode5g=1
txiqlopapu5g=0
iqcalidx5g=50
txiqlopapu2g=0
#In RC58.35, Change Value to 5
dlorange_lowlimit=5
loflag=1
# In RC58.29, for RSSI return with pkteng_stats
rssicorrnorm=3
rssicorratten=3
rssicorrnorm5g=5,3,3
rssicorratten5g=5,3,3
#for BT-coexistence
btc_params80=0
btc_params6=10
btc_params95=53

View File

@ -0,0 +1,159 @@
# SWB-B52_S6_17E_4p2_58.43_N_07/27/2012
manfid=0x2d0
prodid=0x05c1
vendid=0x14e4
devid=0x4380
boardtype=0x05de
boardrev=0x1200
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=3
boardflags=0x10081a01
xtalfreq=37400
nocrc=1
ag0=252
aa2g=1
ccode=GB
pa0itssit=0x20
#PA parameters for 2.4GHz_0327
pa0b0=0x4094
pa0b1=0xF9E5
pa0b2=0x1FB
tssifloor2g=12
extpagain2g=2
extpagain5g=2
cckPwrOffset=12
# rssi params for 2.4GHz
rssismf2g=0x2
rssismc2g=0xC
rssisav2g=0x1
# rssi params for 5GHz
rssismf5g=0x8
rssismc5g=0x8
rssisav5g=0x1
#PA parameters for lower band_0327
pa1lob0=0x1492
pa1lob1=0xFD5E
pa1lob2=0xFF23
tssifloor5gl=18
#PA parameters for midband
pa1b0=0x157B
pa1b1=0xFD48
pa1b2=0xFF27
tssifloor5gm=18
#PA parameters for high band
pa1hib0=0x15BB
pa1hib1=0xFD43
pa1hib2=0xFF2A
tssifloor5gh=18
PwrOffset40mhz5g=4
rxpo5g=0
maxp2ga0=76
ofdm2gpo=0x77777772
mcs2gpo0=0x8888
mcs2gpo1=0x8888
cckdigfilttype=24
ofdmdigfilttype2g=2
ofdmdigfilttype5g=3
ofdm40digfilttype=9
maxp5gla0=70
ofdm5glpo=0x55555550
mcs5glpo0=0x6666
mcs5glpo1=0x6666
mcs5glpo2=0x8888
mcs5glpo3=0x8888
maxp5ga0=66
ofdm5gpo=0X44444444
mcs5gpo0=0x6666
mcs5gpo1=0x6666
mcs5gpo2=0x8888
mcs5gpo3=0x8888
maxp5gha0=68
ofdm5ghpo=0x44444440
mcs5ghpo0=0x6666
mcs5ghpo1=0x6666
mcs5ghpo2=0x8888
mcs5ghpo3=0x8888
#il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b
pagc2g=0x10
#For SEMCO B53-R05-eLNA Module
swctrlmap_2g=0x0c0c0c0c,0x12120202,0x02020202,0x11202,0x1ff
swctrlmap_5g=0x40404040,0xa0a0a0a0,0x80808080,0x11202,0x2f8
elna_off_gain_idx_2g=30
triso2g=6
triso5g=3
muxenab=0x10
#sd_gpout=0
#sd_oobonly=1
dacrate2xen=1
txalpfbyp=1
# In RC58.29, adding to keep the txALPF powered up , even when the txALPF is bypassed.
txalpfpu=1
# 11b ACR Performance
aci_detect_en_2g=1
dacpu.fab.4=1
gain_settle_dly_2g=4
gain_settle_dly_5g=4
#For TSMC rx sensitivity in low rate
noise_cal_po_2g=-1
#For UMC rx sensitivity in low rate
noise_cal_po_2g.fab.4=6
noise_cal_po_40_2g=-1
noise_cal_high_gain_2g=73
noise_cal_nf_substract_val_2g=346
noise_cal_po_5g=-1
noise_cal_po_40_5g=-1
noise_cal_high_gain_5g=73
# Adding in RC58.29
noise_cal_nf_substract_val_5g=346
iqlocalidx5g=55
# In RC58.35/38. Added on For LOFT
dlocalidx5g=75
# In RC58.33, change EPA_or_PAD_lpbck5g=1 to lpbckmode5g=1
#EPA_or_PAD_lpbck5g=1
lpbckmode5g=1
txiqlopapu5g=0
iqcalidx5g=50
txiqlopapu2g=0
#In RC58.35, Change Value to 5
dlorange_lowlimit=5
loflag=1
# In RC58.29, for RSSI return with pkteng_stats
#rssicorrnorm=3
#rssicorratten=3
#rssicorrnorm5g=5,3,3
#rssicorratten5g=5,3,3
#for BT-coexistence
btc_params80=0
btc_params6=10
btc_params95=53

View File

@ -0,0 +1,131 @@
#120726 Nvram VM Version 47
manfid=0x2d0
prodid=0x05c1
vendid=0x14e4
devid=0x4380
boardtype=0x05de
boardrev=0x1200
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=3
boardflags=0x10081a01
xtalfreq=37400
nocrc=1
ag0=252
aa2g=1
ccode=GB
#Power Cal
pa0itssit=0x20
pa0b0=0x15a3
pa0b1=0xfd30
pa0b2=0xff17
tssifloor2g=24
extpagain2g=2
extpagain5g=2
cckPwrOffset=8
rssismf2g=0xf
rssismc2g=0x9
rssisav2g=0x1
rssismf5g=0x9
rssismc5g=0x9
rssisav5g=0x1
pa1lob0=0x1532
pa1lob1=0xfd5e
pa1lob2=0xff3e
tssifloor5gl=26
pa1b0=0x1542
pa1b1=0xfd67
pa1b2=0xff51
tssifloor5gm=26
pa1hib0=0x1544
pa1hib1=0xfd4c
pa1hib2=0xff42
tssifloor5gh=26
PwrOffset40mhz2g=4
PwrOffset40mhz5g=-10
rxpo5g=0
#2.4GHz Power
maxp2ga0=0x50
ofdm2gpo=0x88888887
mcs2gpo0=0xaaaa
mcs2gpo1=0xaaaa
mcs2gpo2=0xaaaa
mcs2gpo3=0xaaaa
#5GHz Power
maxp5gla0=0x4a
ofdm2gpo=0x66666666
mcs2gpo0=0x6666
mcs2gpo1=0x6666
mcs2gpo2=0x6666
mcs2gpo3=0x6666
maxp5ga0=0x4a
ofdm5gpo=0x66666666
mcs5gpo0=0x6666
mcs5gpo1=0x6666
mcs5gpo2=0x6666
mcs5gpo3=0x6666
maxp5gha0=0x4a
ofdm5ghpo=0x66666666
mcs5ghpo0=0x6666
mcs5ghpo1=0x6666
mcs5ghpo2=0x6666
mcs5ghpo3=0x6666
pagc2g=0x10
#switch
swctrlmap_2g=0x00010001,0x00420002,0x00020002,0x044202,0x1ff
swctrlmap_5g=0x00080008,0x00300010,0x00100010,0x044202,0x238
elna_off_gain_idx_2g=27
triso2g=4
triso5g=5
#for oob
muxenab=0x10
dacrate2xen=1
txalpfbyp=1
txalpfpu=1
#sd_gpout=0
#sd_oobonly=1
dacpu.fab.4=1
aci_detect_en_2g=1
gain_settle_dly_2g=4
gain_settle_dly_5g=4
noise_cal_po_2g=-1
noise_cal_po_40_2g=-1
noise_cal_high_gain_2g=73
noise_cal_nf_substract_val_2g=346
noise_cal_po_5g=-1
noise_cal_po_40_5g=-1
noise_cal_high_gain_5g=73
noise_cal_nf_substract_val_5g=346
ofdmdigfilttype2g=3
ofdmdigfilttype5g=0
ofdm40digfilttype=5
cckdigfilttype=24
iqlocalidx5g=55
dlocalidx5g=75
lpbckmode5g=1
txiqlopapu5g=0
iqcalidx5g=50
txiqlopapu2g=0
dlorange_lowlimit=5
loflag=1
gmgc2g=224
#for RSSI return with pkteng_stats in MFG Nvram only
#rssicorrnorm=0
#rssicorratten=0
#rssicorrnorm5g=3,4,4
#rssicorratten5g=3,4,4
triso2g.fab.4=6
#for Co-Ex
btc_params80=0
btc_params6=10
btc_params95=53

View File

@ -0,0 +1,159 @@
# SWB-B53_R05D_B2_B3_QM_17E_4p2_58.54_06/07/2012
manfid=0x2d0
prodid=0x05c1
vendid=0x14e4
devid=0x4380
boardtype=0x05de
boardrev=0x1200
boardnum=22
macaddr=00:90:4c:c5:12:38
sromrev=3
boardflags=0x10081a01
xtalfreq=37400
nocrc=1
ag0=252
aa2g=1
ccode=GB
pa0itssit=0x20
#PA parameters for 2.4GHz_QM_4p2_120517
pa0b0=0x2AFD
pa0b1=0xFB41
pa0b2=0x6C
tssifloor2g=12
extpagain2g=2
extpagain5g=2
cckPwrOffset=12
# rssi params for 2.4GHz
rssismf2g=0x2
rssismc2g=0xC
rssisav2g=0x1
# rssi params for 5GHz
rssismf5g=0x8
rssismc5g=0x8
rssisav5g=0x1
#PA parameters for lower band_QM_4p2_120214
pa1lob0=0x1672
pa1lob1=0xFD53
pa1lob2=0xFF69
tssifloor5gl=18
#PA parameters for midband
pa1b0=0x1712
pa1b1=0xFD5D
pa1b2=0xFF82
tssifloor5gm=18
#PA parameters for high band
pa1hib0=0x1696
pa1hib1=0xFD64
pa1hib2=0xFF7A
tssifloor5gh=18
PwrOffset40mhz5g=-10
rxpo5g=0
maxp2ga0=78
ofdm2gpo=0x44444444
mcs2gpo0=0xaaaa
mcs2gpo1=0xaaaa
cckdigfilttype=24
ofdmdigfilttype2g=9
ofdmdigfilttype5g=3
ofdm40digfilttype=8
maxp5gla0=64
ofdm5glpo=0x33333333
mcs5glpo0=0x5555
mcs5glpo1=0x5555
mcs5glpo2=0x7777
mcs5glpo3=0x7777
maxp5ga0=66
ofdm5gpo=0x33333333
mcs5gpo0=0x5555
mcs5gpo1=0x5555
mcs5gpo2=0x7777
mcs5gpo3=0x7777
maxp5gha0=65
ofdm5ghpo=0x33333333
mcs5ghpo0=0x5555
mcs5ghpo1=0x5555
mcs5ghpo2=0x7777
mcs5ghpo3=0x7777
#il0macaddr=00:90:4c:c5:12:38
wl0id=0x431b
pagc2g=0x10
#For SEMCO B53-R05-eLNA Module
swctrlmap_2g=0x0c0c0c0c,0x12120202,0x02020202,0x11202,0x1ff
swctrlmap_5g=0x40404040,0xa0a0a0a0,0x80808080,0x11202,0x2f8
elna_off_gain_idx_2g=30
triso2g=6
triso5g=3
muxenab=0x10
#sd_gpout=0
#sd_oobonly=1
dacrate2xen=1
txalpfbyp=1
# In RC58.29, adding to keep the txALPF powered up , even when the txALPF is bypassed.
txalpfpu=1
# 11b ACR Performance
aci_detect_en_2g=1
dacpu.fab.4=1
gain_settle_dly_2g=4
gain_settle_dly_5g=4
#For TSMC rx sensitivity in low rate
noise_cal_po_2g=-1
#For UMC rx sensitivity in low rate
noise_cal_po_2g.fab.4=6
noise_cal_po_40_2g=-1
noise_cal_high_gain_2g=73
noise_cal_nf_substract_val_2g=346
noise_cal_po_5g=-1
noise_cal_po_40_5g=-1
noise_cal_high_gain_5g=73
# Adding in RC58.29
noise_cal_nf_substract_val_5g=346
iqlocalidx5g=55
# In RC58.35/38. Added on For LOFT
dlocalidx5g=75
# In RC58.33, change EPA_or_PAD_lpbck5g=1 to lpbckmode5g=1
#EPA_or_PAD_lpbck5g=1
lpbckmode5g=1
txiqlopapu5g=0
iqcalidx5g=50
txiqlopapu2g=0
#In RC58.35, Change Value to 5
dlorange_lowlimit=5
loflag=1
# In RC58.29, for RSSI return with pkteng_stats
#rssicorrnorm=3
#rssicorratten=3
#rssicorrnorm5g=5,3,3
#rssicorratten5g=5,3,3
#for BT-coexistence
btc_params80=0
btc_params6=10
btc_params95=53